BSP html code arrives imcomplete at the browser

Hello BSP Gurus,
I have a strange problem with a "freestyle" BSP page. (no bsp-extensions, htmlb etc)
The page displays a table of data. At the end there should be a button "Submit". Occasionally, this button is not displayed in the browser, but only a fraction of the html code, like:
<input type="submit" value="change" name="OnInputProcessing(change) style="width:80
and nothing more.
so to me it seems that a part of html is missing, and therefore the browser cannot render the button, but displays the html coding (as text).
I have this problem on different BSP pages, but it happens only occasionally and is not reproducable for me. However, the users (in this case external partners) are not amused.
I have already played around with transmission compression options, but no effect. Had the error with and without compression.
Has anyone had this before, and solved it ?
I am on NW7.0 SP14
best regards,
Johannes

HI
As u said " the browser cannot render the button, but displays the html coding (as text). " it means there is problem in ending TAGS properly .
eg
<input type="submit" value="change" name="OnInputProcessing(change) style="width:80
should be
<input type="submit" value="change" name="OnInputProcessing(change) style="width:80 />
this may help u.
Rgeards
Sachin

Similar Messages

I want to skip some html code part when refersh the page, how can we know

Hi,
i want to skip some html code part when refersh the page, how can we know when we pressed refresh button or F5 key
thanks in advance....

There's not really any simple way to do this. Maybe tracking the page the user should be one from every page in the site and if the page being accessed is the same as the last one accessed, assume it was a refresh.

Cfolder BSP HTML code editor

all gurus
can we change the html which get generated by BSP?
i tried in se80 i have found the class
and want to see the html code so that i can change the null pointer
my problem
can anyone tell me how to cancel web address given in layout.
the situation is
in cfolder
I created a document for JPG file and had given link of the file in Layout.
now by mistake, i have overwritten the file so the link has changed.
now im unable to see the banner.
No prob till this.
now whenever im trying to save any document or open the layout settings thru, Cfolder Administration, im getting
Error
Session canceled because over time limit
im not able to do anythin?
how can i cancel activate banner or how can i access layout page from backend or front end.
anyway is there any way that i can see the coding of the HTML file
i have found out the class in which that html page is there.
thanks
Niranjan

HI
As u said " the browser cannot render the button, but displays the html coding (as text). " it means there is problem in ending TAGS properly .
eg
<input type="submit" value="change" name="OnInputProcessing(change) style="width:80
should be
<input type="submit" value="change" name="OnInputProcessing(change) style="width:80 />
this may help u.
Rgeards
Sachin

Html code are moving all the rest

Hi,
I work with muse now 4 weeks and i like it very much. I have not a clue about html code but i helped myself building a great site. (www.verfcentrum.com). I have only a big problem. I used the facebook likebox html code which I OBJECT, INSERT HTML COPY PAST and also the mailchimp code (OBJECT, INSERT HTML COPY PAST). They both work perfect but i cannot place them somewhere in the middle of wherever i want. They move all the pictures around it. What do i do wrong? Its like they want the place around the frame to be clear. As you see on the website i solved a little bit the problem by placing the facebook likebook in my header and the mailchimp code down under. But as soon i move the code a little bit up al the pictures go crazy.... HELP PLS......(by the way: if i do preview everything looks perfect. Only after uploading with filezilla it starts.-)

have going through FOXTAB's support center but nobody seems to have had same problem.

When previewed in browser or on the server the path of my web site repeats folders. However the "href" in the html code does not show the repetition in the path.

If someone could help me on this one, this would be great. I am creating a web site that has several departments. I have categorized and saved each department in a main folder called "departments" and a subfolder for each one. In the Dreamweaver code view the pop-up menu links seem to show up properly, but when I preview in browser or upload to server "page not found" comes up because for some reason the address changes. Some parts of the address seem to be appearing twice, sometimes the entire path will appear twice as shown below:
http://www.graphicmechanic.com/DEKALBCOUNTY/departments/parks-and-recreation/departments/p arks-and-recreation/pr-arabiamtn-map.html
that is incorrect and it takes me to "web page cannot be found".
It is obviously repeating the folders (hence the "departments/parks-and-recreation" twice. The correct link is:
http://www.graphicmechanic.com/DEKALBCOUNTY/departments/parks-and-recreation/pr-arabiamtn- map.html
The link issues are happening in the pop-up menu. For example if you go to http://www.graphicmechanic.com/DEKALBCOUNTY/departments/parks-and-recreation/pr-arabiamtn. html and rollover the link called "Arabia Mountain" in the links to the left side of the page, then click the pop-up menu link entitled "Arabia Mountain Map" that's where the problem occurs.
Can anyone tell me how I can fix this problem. I don't know what I should do with the code since it already appears correct in html view.
Please help if you can...
Thanks in advance for any possible help you can provide...

XonoBoom wrote:
It is obviously repeating the folders (hence the "departments/parks-and-recreation" twice. The correct link is:
http://www.graphicmechanic.com/DEKALBCOUNTY/departments/parks-and-recreation/pr- arabiamtn-map.html
The link issues are happening in the pop-up menu.
This problem usually happens when the menu is either a server-side include or a library item using links relative to the document. When you reference a page at a different level of the folder hierarchy, the document-relative links no longer point to the correct destination.
Change the links in the menu to be relative to the site root.
A document-relative link usually looks like this:
<a href="../products/index.html">Products</a>
A link relative to the site root begins with a forward slash like this:
<a href="/products/index.html">Products</a>

I used to get photos and pics via ATT/Yahoo email, now they show up in the email as HTML code. What's the fix?

A few weeks ago forwarded messages with pics and other messages with attached photos gave long strings of HTML text code instead of the
I tried sending them to different viewers and got dialog boxes saying the file can't be read.
All of them were from people who had successfully sent email pics before.
My computer shop guy said ATT/Yahoo email changed something and I should use another email service.
What is the fix?
Any help is much appreciated.
Ron

My husband has the same phone, we purchased them at the same time. I sent him the same photos in the same email that I downloaded them from and on his phone they show up with the normal higher resolution. Is it possible that there is something wrong with my iPhone or is there a setting that can be changed? I'm still learning to use it. All my other photos are of normal resolution. Does this make any sense to anyone?
Please help!
Deb

Html code for closing the browser window on logoff.

Hello,
I am using the logoff redirecrt url feauture to divert the logoff page to a custom made html page. I want this page should be closed automatically after being called i.e. when I click the logoff button it should divert to this custom html page and than close the browser automatically.
Can you please help me with the code for this custom html page so that it closes the whole browser automatically when it get called.
Regards
Deb

Don't know about the coding. May be we can do it by setting the property
Initial State - Open or Closed or may be make that window Invisible.
Others will advice you soon related to this.
Regards
Puneet

Viewing HTML page saved on the server from the browser

Hi all
In my application i am having some HTML pages saved on the server. I had given an option to the user to view the HTML page from my application. behind the scene what i am doing is that the view request will get handled by a servlet and from that servlet iam locating the HTML page on the server directory and sending the HTML page to browser by using the Servlet OutputStream. The HTML page is shown on the browser but the attached images are not shown. The images are also there in the server directory and are refered in the HTML file correctly. When i directly open the HTML file then the images are shown correctly.
Can anyone suggest wat's wrong there.
The code i m using is
ServletOutputStream out=response.getOutputStream();
                    if(format.equalsIgnoreCase("pdf"))
                         logger.info("Seleted format is pdf..\n");
                         response.setContentType("application/pdf");
                    else
                         logger.info("Seleted format is html..\n");
                         response.setContentType("text/html");
String file = ReportingConstants.URL_GENERATEDREPORTS+reportPath+itemName;
// file : HTML file absolute path as string.
                    URL url=new URL(file);
                    BufferedInputStream bis=new BufferedInputStream(url.openStream());
                    BufferedOutputStream bos=new BufferedOutputStream(out);
                    byte[] buff = new byte[2048];
                    int bytesRead;
                    while(-1 != (bytesRead = bis.read(buff, 0, buff.length))) {
                         bos.write(buff, 0, bytesRead);
                         bos.flush();
                    }

You have to undertsand how the browser handles images and other resources in a HTML page. In the HTML there is an image tag that has a url to an image which can be a reletive url or an absolute url (starts with a "/").
If the url is a relative url the browser interprets the url as being relative to the url currently displayed in the address field discarding the last element of the url . So if the url in the address bar is http://www.myserver.com/myapp/mypage.html and the relative url is images/myimage.jpg, the browser will submit a request to the server for http://www.myserver.com/myapp/images/myimage.jpg
Now let's say that you are call mypage.html from a servlet that has the url http://www.myserver.com/myapp/servlets/myservlet. Then when the browser tries to retrieve myimage.jpg it will use the url http://www.myserver.com/myapp/servlets/myservlet/images/myimage.jpg and since this is incorrect it will not be able to display the images.
One solution to this is to change all of the image urls to absolute urls. That is the start with a slash where the slash represents the start of the url after the application domain name. For example you used an absolute url for myimage.jpg it would look like /images.myimage.jpg and when accessing the page through the servlet url (http://www.myserver.com/myapp/servlets/myservlet) the browser will discard everything after http://www.myserver.com/myapp and look for the image at http://www.myserver.com/myapp/images/myimage.jpg which is the correct url.
A second solution is to use the HTML BASE tag which tells the browser not to interpret the image tag urls (and other resourses) using the current url in the address bar but to use the url supplied in the HTML BASE tag. The browser will still perform the same process for relative urls but now relative to the BASE tag url. Since the BASE tag url will be the same every time the page is accesssed the images should be correctly accessed no matter how the page is accessed (eg directly, using RequestDistpatcher or via your servlet)

How can I link .svg files in the .html code?

How can I link .svg files in the .html code?

I use the FileBrowser app by Stratospherix to do this. I can watch / stream my movies on my iPhone / iPad from my hard drive connected to my Airport Extreme. I can access all the files on that hard drive as well.

How to shorten the HTML code name when it's a hyperlink?

Hi there,
I'm trying to make all of my hyperlink html codes short and to the point. If you go to one of my site pages http://tinyurl.com/pj5rqz then roll your curser over the Download PDF and then roll it over the pictures them selves. You'll see that there is redundancy in the names and their all different. I'd like the code to simply read Best of Flowers 2. Is that possible? What do I need to do?
Thanks.

Hi RagnaRock,
You can use the following form, hope it helps you.
Regards,
Ozcan.
form get_data_from_url using iv_url type clike changing iv_data type string.
DATA: HTTP_CLIENT TYPE REF TO IF_HTTP_CLIENT .
clear iv_data.
CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
       EXPORTING
        URL                = IV_URL
*          PROXY_HOST         = '10.1.1.1'
*          PROXY_SERVICE      = '1234'
*       SSL_ID             =
       IMPORTING
         CLIENT             = HTTP_CLIENT
       EXCEPTIONS
         ARGUMENT_NOT_FOUND = 1
         PLUGIN_NOT_ACTIVE = 2
         INTERNAL_ERROR     = 3
         OTHERS             = 4.
CHECK SY-SUBRC = 0.
CALL METHOD HTTP_CLIENT->SEND
    EXCEPTIONS
      HTTP_COMMUNICATION_FAILURE = 1
      HTTP_INVALID_STATE         = 2.
CHECK SY-SUBRC = 0.
CALL METHOD HTTP_CLIENT->RECEIVE
    EXCEPTIONS
      HTTP_COMMUNICATION_FAILURE = 1
      HTTP_INVALID_STATE         = 2
      HTTP_PROCESSING_FAILED     = 3.
CHECK SY-SUBRC = 0.
iv_data = HTTP_CLIENT->RESPONSE->GET_CDATA( ).
endform.                    "get_data_from_url
Edited by: Ozcan Gurdal on Aug 11, 2010 4:07 PM

Htmldb_item displays the value of items as HTML code

I have created an SQL Query(Updateable Report) with 1 edit column. I am trying to display the data and to do Multi-row updates using HTMLDB.Item.
The data displays as HTML code when I define the element as a "Text Field".
The data displays fine when I define the element as a "Standard Report Column", but then I can't edit it.
Here is the code I use in my Sql Query:
Select x.seq_no, x.tpc_note
from
(select HTMLDB_ITEM.HIDDEN(1,CONSULTANT_NO) consultant_no,
HTMLDB_ITEM.TEXT(2,SEQ_NO) Seq_no,
HTMLDB_ITEM.TEXT(3,TPC_NOTE,4,75) Tpc_note
from wb_tpc_consultant_notes
where company = v('p1_company') and
consultant_no = v('p1_consultant_no')
union all
select HTMLDB_ITEM.HIDDEN(1,null) consultant_no,
HTMLDB_ITEM.TEXT(2,((select max(seq_no)
from wb_tpc_consultant_notes where
company = v('p1_company') and
consultant_no = v('p1_consultant_no')) + nvl(:p2_rows,1))) Seq_no,
HTMLDB_ITEM.TEXT(3,null,4,75) Tpc_note
from all_objects where rownum < nvl(:P2_ROWS, 2)) x
order by 1
Any ideas on what I am doing wrong? I cannot find any documentation on using the Htmldb_item API.
Thanks
Debbie

Yes. I have done that. When I set it to Standard Report Column it displays fine.
Then when I type in changes and click the apply changes button, it always goes back to the original value.
Here is the code behind the apply changes button:
For i in 1..htmldb_application.g_f01.count loop
if htmldb_application.g_f01(i) is not null then
update wb_tpc_consultant_notes
set tpc_note = htmldb_application.g_f03(i)
where company = v('p1_company') and
consultant_no = v('p1_consultant_no') and
seq_no = htmldb_application.g_f02(i);
else
if htmldb_application.g_f01(i) is null then
insert into wb_tpc_consultant_notes
(company,
consultant_no,
seq_no,
tpc_note)
values
(v('p1_company'),
v('p1_consultant_no'),
htmldb_application.g_f02(i),
htmldb_application.g_f03(i));
end if;
Debbie

Is there a way to edit the html code of the page directly on iweb?

My web server gives me the error: Parse error: syntax error, unexpected T_STRING, everytime I try to access my site after I've updated it with the FTP server. I leanred that it was because of a bit of extraneous code in the beginning of each page that my web server just doesn't seem to like. I can go back through once it is updated and delete the code on the web server but it is a big pain to do this each time I update my website, and I would still like to be able to utilize FTP.
Any help would be greatly appreciated.

No, you cannot edit the HTML code in iWeb. The webpages are created when you choose publish.
The parse error is caused by a misconfigured server. Here's how to solve it :
The PHP parse error
If you cannot change it, ask your webhoster to do it for you. It's not a iWeb issue.

How to keep HTML code in the applet source (.java) file itself?

Hi,
How to keep HTML code (APPLET tag) in the applet source (.java) file itself?
Please give an example?
thank you,

R6i wrote:
...What I mean is without writing external HTML file, how to run an applet (during practice)?'Practice'? What does that mean? During development? If that is what you are referring to, add an applet tag at the top of YourApplet.java inside a Java comment area. Then AppletViewer (in recent SDKs) can then run it with just..
prompt:javac YourApplet.java
prompt:// the '.java' extension is not a mistake
prompt:appletviewer YourApplet.javaIf you do not mean 'during development', then that brings us back to +"What advantages do you see that is bringing to the end user?".+

How to remove extra line breaks in my html code?

On my website: 2neatmagazines.com, I have old html, written years ago. The html all functions fine, no problems in the broswers. When I Iook at the code, there are lots of line breaks in the text portions.
I can do "apply source formatting", and that has cleaned and aligned the html code nicely. But, the text descriptions in the html still breaks at fixes places. This does not affect how it renders, just how the code looks. For example:
                  <p align="left"><span class="blacksregularbold"><span class="blackregular">Life
                    Magazine </span>January 11, 1937</span> : Cover - Japanese
                    soldiers doing their exercises. Full page LIFE magazine
                    ad with railroad locomotive at night. The "first"
                    candid photographs taken by Paul Nadar of Paris in 1886.
                    Governors - new and old. Margaret Sanger wins the court
                    victory that birth control contraceptives can be sent
                    by mail, long fight for related women's rights . Bootleg
                    coal mining near Shamokin, Pennsylvania. Painter Winslow
                    Homer. Dinosaurs Enshrined (collection, storage and
                    display of dinosaur fossils in museums, including Dinosaur
                    National Monument). Baths of Foam, milk, mud,and wax
                    for beauty. . Theatre in 1936 and 1937. Japanese Army.
                    Sonja Henie in her movie "One in a million."
                    Includes photos of Sonja Henie bicycling - looks like
                    today's town cruiser bikes. . Amazing series of photos
                    of San Francisco people interacting (or not) with bum
                    laying on sidewalk. Photos from wreck of United Airliner
                    which crashed December 27, 1936 in the Santa Susana
                    Mountains of California. Five airline crashes in two
                    weeks at end of 1936. Ice hockey fights. "Tobacco
                    Road" on Broadway. Japanese soldiers training.
                    Neat photo of five new locomotives in a row, Canadian
                    National Railways. <br />
                    <span class="redregular">Very Good</span> - $52
I would like the main text to be wrapped, and neat. I have tried various "text cleaners" like Haven for the mac, but none of the settings will get rid of this annoying line break formatting.
Any suggestions would be appreciated.
mark

The only "Line Break"
<br /> I see is at the end.
Code formating just cleans the display of the visual code it doesn't effect the browser display.
You can do a "Search and Replace" the <br /> with nothing. to strip all <br /> for the whole site or DIR or page.
In code view right mouse click and choose
"Search and Replace"
Is this what your are asking help on?
Shane

Uploaded html code is reformatted

I've asked this before but not had a comprehensive resolution.
This issue began when I moved from my apple powerpc running OSX 10.5.8 to an imac running 10.7.3 and for the reasons you'll see I'm sure this is connected with mac OS than dreamweaver, but I would appreciate any feedback from anyone else who has experienced this problem.
The Problem:
The code in html files uploaded using dreamweaver or filezilla get reformatted into one continuous line. In itself this is not a problem until javascript is included. Javascript won't function without linebreaks and so menus and galleries all stop functioning. If I download the file I can reformat the page but that doesn't stop the problem. The source code as viewed in the browser is one continuous line and that's what the browser seems to be reading.
Work around
My work around so far has involved connecting my drive up to my old machine and uploading javascripts from there (using dreamweaver4 for powerpc). Trouble is, my powerpc power unit has now died and I don't have that option, and occasionally I actually would like to see the javascript or spry references in the document and not buried in server side includes. I'm now using my laptop running dreamweaver 8 just to upload files
So all this would suggest that it's not a dreamweaver issue. All the files are created using dreamweaver 5.5 and upload perfectly well using older versions or filezilla as long as I use an older apple OSX.
Has anybody alse had this?
Billy the kid

Essentially when you're uploading your files, dreamweaver has removed all the carriage returns.
I believe a preference in Dreamweaver.
It's called All in line Code.
It's commonly used by companies that want to make their html code difficult to read.
Have a look at google.com's source code and you'll see that it's nasty difficult to read.
I'm not sure where the preference is in Dreamweaver, but I read somewhere a long time ago that it was a feature that you could enable for your website.
You should be able to disable it for any of your java scripts, and enable it for your HTML pages.
Or disable it all together.
Call Adobe and get them to help you find it. If it's a legit copy of Dreamweaver, I'm sure they'll be more than happy to help out! The worst wait time I've had with them is like 15 minutes. Not bad...
HTH
-Graham

BSP html code arrives imcomplete at the browser

Similar Messages

Maybe you are looking for