BSP: multiple values selection in select-option

Hi,
Our customer requires multiple values selection in BSP pages as he is used to in standard SAP GUI.
I found it's impossible in standard.
Could it be possible to used javascript for this ... each select-option would have its own script that would pass table with selected values as parameter to HTTP request?
thanks
Juraj

Of course this is possible, you have HTML in the frontend, so you can do as much as HTML allows you. If you know DHTML you can play with it and create almost every layout you want, but then you have to keep in mind that you will have to take care about everything behind, starting from conversions (input/output), formatting, validation and so on.

Similar Messages

Passing Multiple Values from Multi Select

Hi,
My requirement is simple. I have created a simple Multi Select Option in parameter form and i want to send multiple selected values from the multi select option (in parameter form) to reports.
eg:
I want to send multiple countries code as input .........'US', 'CA', 'IND', 'UK'
Can i do it in Oracle 6i reports, Thanks in Advance.
Regards,
Asgar

Hi Thanks Again,
For such a nice response. I got the Lexical Where condition properly running but still getting problems in catching the multiple values to be passed from form. just i will give u an insight of wat i have done:
SQL:
SELECT ALL FROM EMPLOYEES &cond_1* -- Working FIne
in my Html Parameter Form i have an Multi Select component (the Problem is here) it is not passing more than i value from the form once i am accessing it from web or running it in paper report. In paper report layout it is not allowing me to select more than one value. but in HTML it is allowing to select multiple values but at the server end (After Parameter Form Trigger) it is giving a single value not multiple values.
In PL/SQL when i checking the length of country_id i m getting it as one.
Here is my SQL code
srw.message(10, LENGTH(:country_id_1));
:cond_1 := 'where country_id = '''|| :country_id_1 ||'''';
This is passing the condition properly to SQL but only with single value but i want to pass multiple values
I am struck in this+_
WHERE CONTRY_COLUMN IN ('USA','UAE') -- This variable you have to pass from you form...
Here as you said you gave multiple selection in your parameter form to generate report. So before generation report just prepare variable like this as it is bold above.
and pass parameter through your runtime form to the report as you pass the normal parameter...liket this i gave you example...
ADD_PARAMETER(PARAMETER_LIST_NAME,'P_CONT_PARAM',TEXT_PARAMETER,vString);
Sorry for troubling you for a small thing but please help me to solve this issue.
Thanks Again............
Asgar.

Filtering a sharepoint 2010 list using Multiple values from Multi-Select Filtering In Infopath 2010 form

I am creating a browser based InfoPath 2010 form Calendar Filtering
using SharePoint 2010 Calendar List (All Events) and InfoPath 2010. This form has data connection to the Calendar list. Goal is to
compare Calendar Events from Current Year to Previous Year. I have 2 columns called - Previous Year and Current Year. I have 2 drop-down controls in each columns called
Select Year and Select Week. I also have common drop down called
Select Category which holds category of the events such as weather, power outages and so on. I wish to display specific events on specific date and specific week on both columns.
I am able to filter the list based upon Year and Week
on both these columns by applying rules in the InfoPath 2010 form. The real issue is that I want to apply category filter on the search result of
Year and Week. Or it needs to show all the values if I
select Category value as All. So I wish to apply filter on Search results using Category drop-down list selection.
Hope I could explain this better but I tried to do the best here. Any suggestions, hint, or pointers
Thanks
Snehal H Rana
Thanks Snehal H.Rana SharePoint Consultant

I am creating a browser based InfoPath 2010 form Calendar Filtering
using SharePoint 2010 Calendar List (All Events) and InfoPath 2010. This form has data connection to the Calendar list. Goal is to
compare Calendar Events from Current Year to Previous Year. I have 2 columns called - Previous Year and Current Year. I have 2 drop-down controls in each columns called
Select Year and Select Week. I also have common drop down called
Select Category which holds category of the events such as weather, power outages and so on. I wish to display specific events on specific date and specific week on both columns.
I am able to filter the list based upon Year and Week
on both these columns by applying rules in the InfoPath 2010 form. The real issue is that I want to apply category filter on the search result of
Year and Week. Or it needs to show all the values if I
select Category value as All. So I wish to apply filter on Search results using Category drop-down list selection.
Hope I could explain this better but I tried to do the best here. Any suggestions, hint, or pointers
Thanks
Snehal H Rana
Thanks Snehal H.Rana SharePoint Consultant

Select multiple values in mult-select list

I have the following query as the source for a multi-select page item:
SELECT person.person_id
FROM person, pers_proj_task
WHERE pers_proj_task.person_id = person.person_id
AND pers_proj_task.project_id = :P3_PROJECT_ID
The query returns two records and the page item's session value is 4:3, but only the value 4 is highlighted in the mulit-select list. How can I get both values to be highlighted?

Got it to work for a multi-select item by following Dimitri's post which uses a shuttle example. It was still only highlighting one value, but I tried Patrick Wolf's suggestion from the comments on Dimitri's post to put the pl/sql block in the source of the item rather than as a computation and it worked.
So I now have a multi-select list which has default values pulled from a LOV. The items that are highlighted by default are selected by using the following pl/sql block in the "source/value or expression" of the :P3_PERSON_ID multi-select item:
declare
person_list apex_application_global.vc_arr2;
i number := 1;
begin
for r in ( SELECT person.person_id
FROM person, pers_proj_task
WHERE pers_proj_task.person_id = person.person_id
AND pers_proj_task.project_id = :P3_PROJECT_ID)
loop
person_list(i) := r.person_id;
i := i + 1;
end loop;
return APEX_UTIL.TABLE_TO_STRING(person_list,':');
end;
Thanks to Amanda, ArtS, Dimitri and Patrick.
Jeremy

Automatically Selecting Values in Multiple Values Dropdown Parameters

Hi,
Is it possible to have parameter values automatically selected in a dropdown in an SSRS report? I'm using SQL Server 2008 R2 Enterprise edition. Basically what I have in mind is this: The user wants to save his parameter selections in a
table that will be available as a dropdown parameter of a report, call it
ParamUserSelection. ParamUserSelection is the first parameter of the report and other parameters depend on it.
We have two other parameters called ParamCountry and
ParamState. These are dropdown text parameters that allow multiple values to be selected. Populating the list is not a problem as I use a standard cascading parameter technique. What I'm trying to do is the following:
The user selects a value from ParamUserSelection, call it Selection1. Selection1 is stored in a table and has all the values that should be selected in ParamCountry and ParamState. In other words, it should tell these two subsequent parameters,
what values should be selected in their respective dropdowns. For example if the user selects Selection1 from ParamUserSelection, it reads the values in the database table and if it finds US and Canada for countries and CA, NY, ON for states, ParamCountry
should be populated with all the countries available in the database but should have ONLY US and Canada as selected values and ParamState should be populated with all the states in the database but should have ONLY CA, NY and ON as selected values.
If then I click on selection 2 and it has ParamCountry = US, ParamState = TX,OH in its database then again all countries and states should be in the dropdown but only US for ParamCountry and TX,OH for ParamState should be selected.
Is this possible with SSRS? I've tried using the Default Values tab with a dataset that returns all the selected values under Report Parameters Properties but this only works for the first time that I select ParamUserSelection. It appears that
if I change the value of ParamUserSelection again, the default values are not invoked.
If this is possible, please tell me how to do this as I have been struggling for a day with it.

Hi Comedian,
According to your description, you have a report with three parameters (ParamUserSelection, ParamCountry, ParamState). The available value lists of ParamCountry and ParamState are based on the selection of a value for ParamUserSelection. Now you want to
show all countries and states in their parameter dropdown list when selecting a user selection instead of only showing the cascading values. Right?
In Reporting Service, when we want a parameter to show the cascading values, we only need to set the corresponding dataset and field for Default Values in this parameter. In this scenario, if we want to show all countries and states in their dropdown list,
we just need to set another dataset for Available Values in those parameters so they can display all countries and states. We have tested your case in our local environment. Since you have done with the cascading parameters, we just give some part of steps
and screenshots for your reference:
We created two tables (dbo.Selection, dbo.states) based on your information.
Create one more dataset (named dataset2) in your report, put text below into your query:
select distinct Country from states
Create another dataset (named dataset3), put text below into your query:
select distinct State from states
Go to your ParamCountry, in Available Values, select dataset2 and Country for dataset and field.
Go to your ParamState, in Available Values, select dataset3 and State for dataset and field.
Save and preview. It looks like below:
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Return multiple values from a function to a SELECT statement

I hope I've provided enough information here. If not, just let me know what I'm missing.
I am creating a view that will combine information from a few tables. Most of it is fairly straightforward, but there are a couple of columns in the view that I need to get by running a function within a package. Even this is fairly straightforward (I have a function named action_date in a package called rp, for instance, which I can use to return the date I need via SELECT rp.action_date(sequence_number).
Here's the issue: I actually need to return several bits of information from the same record (not just action_date, but also action_office, action_value, etc.) - a join of the tables won't work here as I'll explain below. I can, of course, run a separate function for each statement but that is obviously inefficient. Within the confines of the view select statement however, I'm not sure how to return each of the values I need.
For instance, right now, I have:
Table1:
sequence_number NUMBER(10),
name VARCHAR(30),
Table2:
Table1_seq NUMBER(10),
action_seq NUMBER(10),
action_date DATE,
action_office VARCHAR(3),
action_value VARCHAR(60),
I can't simply join Table1 and Table2 because I have to do some processing in order to determine which of the matching returned rows I actually need to select. So the package opens a cursor and processes each row until it finds the one that I need.
The following works but is inefficient since all of the calls to the package will return columns from the same record. I just don't know how to return all the values I need into the SELECT statement.
CREATE VIEW all_this_stuff AS
SELECT sequence_number, name,
rp.action_date(sequence_number) action_date,
rp.action_office(sequence_number) action_office,
rp.action_value(sequence_number) action_value
FROM table1
Is there a way to return multiple values into my SELECT statement or am I going about this all wrong?
Any suggestions?
Thanks so much!

Hi,
What you want is a Top-N Query , which you can do using the analytic ROW_NUMBER function in a sub-query, like this:
WITH     got_rnum     AS
     SELECT     action_seq, action_dt, action_office, action_type, action_value
     ,     ROW_NUMBER () OVER ( ORDER BY action_date
                               ,            action_seq
                         ,            action_serial
                       ) AS rnum
     FROM     table2
     WHERE     action_code     = 'AB'
     AND     action_office     LIKE 'E'     -- Is this right?
SELECT     action_seq, action_dt, action_office, action_type, action_value
FROM     got_rnum
WHERE     rnum     = 1
;As written, this will return (at most) one row.
I suspect you'll really want to get one row for each group , where a group is defined by some value in a table to which you're joining.
In that case, add a PARTITION BY clause to the ROW_NUMBER function.
If you'd post a little sample data (CREATE TABLE and INSERT statements), I could show you exactly how.
Since I don't have your tables, I'll show you using tables in the scott schema.
Here's a view that has data from the scott.dept table and also from scott.emp, but only for the most senior employee in each department (that is, the employee with the earliest hiredate). If there happens to be a tie for the earliest hiredate, then the contender with the lowest empno is chosen.
CREATE OR REPLACE VIEW     senior_emp
AS
WITH     got_rnum     AS
     SELECT     d.deptno
     ,     d.dname
     ,     e.empno
     ,     e.ename
     ,     e.hiredate
     ,     ROW_NUMBER () OVER ( PARTITION BY d.deptno
                               ORDER BY         e.hiredate
                         ,                e.empno
                       ) AS rnum
     FROM     scott.dept     d
     JOIN     scott.emp     e     ON     d.deptno     = e.deptno
SELECT     deptno
,     dname
,     empno
,     ename
,     hiredate
FROM     got_rnum
WHERE     rnum     = 1
SELECT     *
FROM     senior_emp
;Output:
.    DEPTNO DNAME               EMPNO ENAME      HIREDATE
        10 ACCOUNTING           7782 CLARK      09-JUN-81
        20 RESEARCH             7369 SMITH      17-DEC-80
        30 SALES                7499 ALLEN      20-FEB-81
By the way, one of the conditions in the query you posted was
action_office     LIKE 'E'which is equivalent to
action_office     = 'E'(LIKE is always equivalent to = if the string after LIKE doesn't contain any wildcards.)
Did you mean to say that, or did you mean something like this:
action_office     LIKE 'E%'instead?

Multiple Selection For Selections screen field

Hi Friends ,
Can any body tell me how to create multiple selection for a field in selection screen and how to capture all those values of that fields in program for database selction. Suppose i am having document number EBELN from EKKO exists in selectio screen . how to create multiple selection for that and how to use all those values given to EBELN to get data from EKKO.
Kumar.

hi,
select-options is one type of parameters where u can give multiple values in ranges or single as a input. when u use select-options then system will create a selection screen for u and u give multiple values as
ex:
select-options: s_ebeln for ekko-ebeln.
internally system creates a internal for s_ebeln which has for attributes
1. low --- starting value if range is used
2. high -
ending value
3. sign -
operator used for validating field
4. option -
to exclude given range of values or single value or to include.
for this u can assign default values in INITIALIZATION event as
INITIALIZATION.
s_ebeln -low = '1'.
s_ebeln- high = '100-100'.
s_ebeln-sign = 'BT'.
s_ebeln-option = 'I' // include
'E' // exclude.
if helpful reward some points.
with regards,
Suresh Aluri.

How to allow user to enter multiple values?

Hi, can someone tell me how I can allow user to select multiple values from a selection screen. To be more clear, I have to display 4 values on the selection screen and want to allow user to select 2 or 3 values from it. It will be very helpful if someone could tell me how to do it.
Thanks in advance,
pushpa

hi mahesh,
pls c the code below. this is what i have written in my program. when i run this program it is showing only one value and that too only the first one '1234'. i want that it display all the values that i gave in the initialization part.
please help.
thanks,
pushpa
SELECTION-SCREEN BEGIN OF BLOCK enter_data WITH FRAME TITLE text-001.
SELECT-OPTIONS skunnr FOR kna1-kunnr.
SELECTION-SCREEN END OF BLOCK enter_data.
INITIALIZATION.
skunnr-low = '1234'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.
skunnr-low = '9824'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.
skunnr-low = '8756'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.
skunnr-low = '6534'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.

Input of Multiple values in BEX Browser

Dear All,
Can I input multiple values i.e Can I copy values from a excel or a data base which are at random and paste in BEX Browser as a input variable. is there any way to do this operation.
Note:- Values need not be in series as stored in table.

Hi Abhijit,
I hope u are asking about input multiple values in data selection of the Query (Infact at selection screen, where u input the value for the query).
Well u can do this if u are using BW3.5 or Above. What u need to do is copy all those selection values from Excell sheet then at selection screen u have to there is a button of multiple copies which will suck values even more than 12 in numbers.
This functionality is perticularly benefial when u want to check the status BW for randon numbers of document numbers.
Hope this works for u.
Kindly assign the points if u feel this solution workable for u.
Regards.
Sunil Tayade Alias Sun Raj .

Passing multiple values to select-option low by submit at one go from zpro.

Hi all,
I have a requirement pass descrete multiple values form my z-program to to select-option low on selction screen of standard SAP program using SUBMIT statment at one go.At the same time select-option high will be empty.I will be thankful if anybody can help me in this regard.
Sandeep.

Hi Check this link...on submitting programs
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db9d7535c111d1829f0000e829fbfe/frameset.htm
here is the code . we are calling the same program....you can call any other program as well.
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.

How to select multiple values from a listbox

Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,

Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank

Struts: getting multiple selected values from a select element

Hi Friends,
I am a total newbie with struts,I have manage to run a simple login script,
Now I was wonderingif there is a select box and user has the ability to select multiple values from it how do I get those values in the *Form class
my select tag looks like this
<html:select property="listboxValue" mulitple="mulitple">
...options--
</html:select>
in the ****Form extends ActionForm{....I have setter and getters for getting the value from select box as below
public void setListboxValue(String value){
this.listboxValue = value;
and the getter is
public String getListboxValue(){
return this.listboxValue ;
please never mind the missing brackets and such.
What I was hoping to get to work was something like this
public void setListboxValue(String[] value){
this.listboxValue = value;
but that does not work...If I have the an array being passed,it seems like this method is no even envoked
Please guide me
Thanks

I'm having trouble to get in the ActionForm all the selected values in my multiple select. I select all the values by setting to true the selected attribute of all the options in a javascript function. In the ActionForm the variable is String[]. I'm not getting any ClassCastException, but I only receive the first value selected (String array with just one element).
Select definition:
<html:select name="detalleConsultaForm" property="destinatarios" multiple="true" size="8" >
Javascript function:
function validalistarelacion(campo)
{ if (campo.length < 1)
alert("Campo sin valores");
campo.select();
return false;
for (var i = 0; i < campo.length; i++)
campo.options.selected = true;
return true;
ActionForm:
String[] destinatarios;
public String[] getDestinatarios() {
return destinatarios;
public void setDestinatarios(String[] destinatarios) {
this.destinatarios = destinatarios;
What I get:
2006-03-30 12:54:19,899 [ExecuteThread: '10' for queue: 'weblogic.kernel.Default'] DEBUG BeanUtils - setProperty(es.tme.apl.mante
nimientosPlanificados.form.DetalleConsultaForm@59def5, destinatarios, [2320])
2006-03-30 12:54:19,899 [ExecuteThread: '10' for queue: 'weblogic.kernel.Default'] DEBUG ConvertUtils - Convert String[1] to class
'java.lang.String[]'
Thnx

RE: Getting multiple values from more than one multiple select popup window

I have a button on a JSP of mine that when clicked creates a popup window (right now it is called popup.html) with a multiple select menu.
My question is how do I get all the values selected from the menu into my JSP (sample.jsp) so that I can set each of the values for my bean.
The other problem is that I have more than one select multiple menu.
Please help if you can. Any advice or suggestions here would be greatly appreciated!
Thank you!

I realize that I can use request.getParameterValues to get the values selected from my html because I am passing them to the hidden inputs I have and then using the request.getParameterValues to get each of the values.
MY PROBLEM IS WHAT IF I HAVE 4 MULTIPLE SELECTS??? How can I use the same html popup menu to get the values from the 4 different multiple selects????
I look forward to your response.
This code is from my JSP:
<INPUT TYPE="TEXT" NAME="Field1" SIZE="15">
<INPUT TYPE="hidden" name="F1Rad1">
<INPUT TYPE="hidden" name="Permission">
<input type=button name=choice onClick="window.open('optionPicker.html','popuppage','width=250,height=100');" value="Options"></TD>
Here is my optionPicker.html code for the pop up menu:
<html>
<head>
<script language="JavaScript">
function sendValue(s)
var boxSize= s.options[0].value;
var restrict = s.options[1].value;
window.opener.document.addNewForm.F1Rad1.value = boxSize;
window.opener.document.addNewForm.Permission.value = restrict;
window.close();
</script>
</head>
<body>
<center>
<form name=selectform>
<select multiple name=selectmenu size="2">
<option value="large">Large Text Input Area
<option value="restrict">Restricted Access
</select>
<p></p>
<input type=button value="Select Option(s) For Field" onClick="sendValue(this.form.selectmenu);">
</form>
</center>
</body>
</html>

How can i select multiple values form select list

Hi ,
I have created few items in a page and all items are Lov items and based on these items stacked charts will display. My requirement is I need to select multiple values form LOV's
Eg: In Interactive report goto filter and select an item and expression as IN and select multiple items and i need to select multiple values like this.
Please anybody help me how to get multiple values.
I have one more doubt Can we have a Print preview option in APEX.
I have to see print preview for stacked charts. is it possible?
Regards
Narender B

HI ,
Thank you for valuable information and looks good.but Here our client need to select multiple values.... for eg: Open IR report and click on Actions button --->select filter
select any column , operator as IN and from expression select multiple items.
I need to select multiple values in that way so, could you please guide me how can i achieve this.
Regards
Narender B

Clearing the displayed value for a SELECT-OPTION

How do I clear the displayed value of a SELECT-OPTION?
I have 2 SELECT-OPTIONs on my screen (standard basic report program screen). I use code like this to populate the drop-down boxes for each one.
=====
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prgrp-low.
PERFORM fill_prgrp_values.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prctr-low.
PERFORM fill_prctr_values.
=====
The value the user picks for the first SELECT-OPTION will affect what values I put in the drop-down list for the second SELECT-OPTION.
If a user enters a value for the second SELECT-OPTION, and then goes back and changes the value of the first SELECT-OPTION, then I want to do two things:
1. Create a new set of values for the drop-down list for the second SELECT-OPTION (no problem; working fine);
2. Clear the displayed value from the second SELECT-OPTION that the user entered previously. That value became invalid when the user picked a new value for the first SELECT-OPTION.
How do I clear that second displayed value?
I have tried CLEAR and REFRESH for the second variable using the formats s_prctr, s_prctr[], and s_prctr-low. They will erase the values of the internal table or part(s) of it, but the displayed value stays on the screen.
I need to clear out the displayed value so the user will either leave it blank or enter or select a new value.
I am using F4IF_INT_TABLE_VALUE_REQUEST to build the drop-down lists, and it works fine, but I do not see any function module to clear the displayed value off the screen.
Thanks for your help.

Sorry, but calling DYNP_VALUES_UPDATE did not work. This is how I coded it.
fld_reset_rcd-fieldname = 'S_PRCTR'.
fld_reset_rcd-stepl      = sy-stepl.
CLEAR fld_reset_rcd-fieldvalue.      " re-initialize s_prctr
CLEAR fld_reset_rcd-fieldinp.        " what goes in here?
APPEND fld_reset_rcd TO fld_reset_tbl.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname = 'ZFI_GL_BALANCE_NGL'
      dynumb = '1000'
    TABLES
      dynpfields = fld_reset_tbl
<Added code tags>
I have discovered that CLEAR and REFRESH of s_prctr will clear it somewhat. If I enter multiple values, ranges, etc., they will all be cleared, EXCEPT for the one single value that is displayed on the main screen. It is not cleared and it remains if you push the button to display the pop-up to enter ranges, etc.
To devrath.sampat -- Thanks for your example for building the drop-down list, but that is not the problem I am having. I am already able to build it just fine.
To repeat my problem, if I:
1. first enter / select a value for the first SELECT-OPTION s_prgrp
2. then enter / select a value for the second SELECT-OPTION s_prctr
3. And finally go back and select a new value of the first SELECT-OPTION s_prgrp from its drop-down list,
     when I do, the program needs to clear the value displayed on the main screen for the second SELECT-OPTION s_prctr (any additional values, ranges, etc., are cleared by CLEAR and REFRESH, if I go look; but not the value shown on the main screen).
Edited by: Scott Crosby on Feb 14, 2012 4:20 PM
Edited by: Suhas Saha on Feb 15, 2012 12:03 PM

BSP: multiple values selection in select-option

Similar Messages

Maybe you are looking for