BT Infinity loss of connection and problems connec...
I am writing on behalf of my parents who have BT Home Hub 2.0 Infinity. They have had the Infinity package for about 2 years and only recently started suffering problems with connections and dropouts.
my mums imac has trouble connecting via WIFI and sometimes have to restart the WIFI connection on the machine. also intermittently various ipads, iphones, laptops, macbooks try and connect and sometimes fail to do so
this doesnt happen all the time, but regular enough through the day to cause problems
there has always been an imac, laptop connected and 2 x ipads
more recently extra ipads, and macbooks have started to connect to whenever spouses are round the house
i dont think it is a problem with two many devices as at any one time we can have macbook pro, imac, laptop, 3ipads and 2iphones connected and never seem to have problems
and the disconnections occur sometimes when only the imac is trying to connect
would really appreciate any help with this, let me know if you need any more information
thanks
This could be a problem with a neighbour having a new router or changing wifi channel to conflict with yours. Install inSSIDer (base version free on PC) or iStumber (free on Mac) to check out what channels are in use and what the signal strenghts are. I don't see why that should only effect the iMac: maybe its got slightly poorer wifi.
Similar Messages
-
Hi,
My magic mouse has started to intermittently loose the connection to my Imac. can anyone advise what the problem may be. ThanksHi,
I have also changed the mouse, but had read that the problem was the batteries not connecting properly. I think I have now solved it. The new mouse was fine until I changed the batteries. I put Duracell in, but it seems they are a fraction shorter than those supplied (Energizer). I got some Energizer batteries and hey presto - problem gone.
David. -
P.S. And all this new technology is biggybacking on very old technology. the bottleneck my be in the old technology.
Elementalfascination wrote:
...Wired connection with SPEEDTEST at 43-47 mbps using 10g ethernet direct from modem. (Full package service BTW) via NVG589... Okay, I took this to mean that you were getting satisfactory preformance. I misread and I apologize. Your issues are with buffering of video streams and actual website performance, not raw download speed.Elementalfascination wrote:
Is it possible that the U-Verse service just isn't reliable? ...Reliable means different things to different people. One of the first components of reliablity would be "Do you remain in contact with the Internet at all times," versus "Does my modem lose connectivity all the time." Via this metric, it would seem to be reliable. Is this not so? A second metric would be "Is the measured download speed consistantly near what I pay for?" Apparently it's reliable in this as well. A third metric would be "Does it consistantly work with all network applications." Here is where you're experiencing an issue. To be fair to the Premise tech, he knows about the first issue and can do somethings about the second issue, but he doesn't have a clue about the third. Similarly, a line tech can't help you with this, either. And don't get me started about first level phone support. This deals with network traffic, peering, routing, buffering, etc. You need a network tech. Strangely enough, no consumer ISP makes access to this sort of tech readily available to the end user. It's a 80/20 rule (more like 90/10 rule), most customers don't experience these sorts of issues and it doesn't make sense to staff to handle them as a matter of course. If you wish to work with an AT&T team that does have some knowledge of these sorts of issues and has access to more back end resources, then please click this U-verse Customer Service link to send a Private Message (PM) to the AT&T customer service team to help you resolve your situation. You can expect a reply via return PM (the blue envelope in the upper right hand corner of this site) in a business day or three.
This is a group of U-verse service specialists who are knowledgeable about U-verse and will stay with your problem until the end (instead of forgetting about it when the phone hits the cradle). Speed things up by including your Billing Account Number, and the best time and way to reach you. Regarding your comment about Googling to see that this is a common problem... just for fun, repeat your search and substitute any other consumer ISP for AT&T and see what you get. If you see a big difference, I'd be amazed. Unless, of course, that ISP doesn't provide a forum like this for users to report such issues. All ISP's have issues of some sort of another that some customers will experience. One more thing before I go. Are your PC's connecting directly to the RG, or are you using some other intervening router? -
I cannot launch Firefox after latest update was loaded.
Problem Solved. Great work, thanks for the prompt and accurate response. This is one reason why I strongly recommend Firefox over Explorer!
-
Methods to detect loss of connection with CRIO
I am developing an application with CRIO. The CRIO has an application in real time in which you are sharing a variable temperature. In my host PC I have an application that will receive this temperature and stored in a database. I need to detect the beginning of my program if present the CRIO and prompting a loss of connection and the system can not initialize.
This is the cRIO code. All it does is continuously update a variable that can be read by the HMI. It is important that this loop runs faster than the HMI loop to prevent false alarms.
The HMI code may look something like this. It is reading the variable being written to by the cRIO. If it does not change, the communication code is not running. You would probably want to do something if Comm's Lost goes true other than turn on an indicator.
There are many ways to do this and you may receive some better ideas from the forum. -
High Packet Loss, High Ping and Slow Connection Ov...
Hi There,
I have been a customer with the BT unlimited broadband package for a little under two years and up until recently have had no real issues with the service. This was until around 3/4 weeks ago I noticed that the internet was very slow and certain online games or applications like Netflix would lose all of its quality or stop completely. At first I thought nothing of it and simply reset my BT Home hub router, and sure enough everything was back to normal. However after around 2-3 hours of moderate use (gaming online or watching Netflix) the problem surfaced again.
Now I am lucky if I can get the entire way through a 40 minute TV episode before the quality drops and/or the service requires buffering. I have already contacted BT via the helpline and the service lady ran through the obligatory steps (turn off, wait 5 minutes, reset the home hub etc.) but she failed to understand that although rebooting the home hub does alleviate the problem initially, the symptoms of a slow connection, high packet loss and high ping always return within an hour.
Four the last couple of weeks I have been trying to investigate the problem myself and I have done the following things:
Tested the line using the master socket (no difference)
Opened the ports on my firewall within the home hub (no difference)
Directly wired in the computer instead of relying on the wifi (no difference)
Tested for interference from neighbours wifi using inSSIDider office (it wasn’t, operating on different channels)
Switched every device that requires internet off apart from the PC (no difference)
So with all that in mind I am fairly confident that it is nothing within my house that has caused a significant reduction in internet quality.
Now I have tried my best to display the problem I am having by recording the connection quality for the last 24 hours. The table below represents the condition and quality of the connection after leaving it a period of time without resetting:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 21:52:14
Downstream:
12.96 Mbps
Upstream:
910 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.7 dB / 5.4 dB
Line attenuation (Down/Up):
29.4 dB / 16.4 dB
Output power (Down/Up):
20.4 dBm / 12.6 dBm
FEC Events (Down/Up):
987297 / 12745
CRC Events (Down/Up):
254 / 15268
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
2437 / 252630
Error Seconds (Local/Remote):
189 / 36430
And here is a result of the ping and packet loss during this time:
Now I immediately reset the home hub after running that test and ran the test again. These are the results I a achieved within 2 minutes of internet connectivity:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:01:05
Downstream:
13.77 Mbps
Upstream:
910 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.4 dB / 5.6 dB
Line attenuation (Down/Up):
29.4 dB / 16.4 dB
Output power (Down/Up):
20.4 dBm / 12.6 dBm
FEC Events (Down/Up):
159 / 12746
CRC Events (Down/Up):
1 / 15573
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 252639
Error Seconds (Local/Remote):
1 / 36438
Even within the time it has taken to compose this page my internet quality has nose-dived from the previous result above to the following:
Connection Information
Line state:
Connected
Connection time:
0 days, 00:52:31
Downstream:
13.77 Mbps
Upstream:
910 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.1 dB / 5.4 dB
Line attenuation (Down/Up):
29.4 dB / 16.4 dB
Output power (Down/Up):
20.4 dBm / 12.6 dBm
FEC Events (Down/Up):
14544 / 12749
CRC Events (Down/Up):
14 / 15584
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
72 / 252647
Error Seconds (Local/Remote):
10 / 36449
What is causing this poor quality in connection and what can be done to rectify the problem?
Thank you for your response in advanced.
Regards,
Richard.Thank you for you quick reply, I have just moved my hub to the master socket again and re-run the test and I seem to be getting the same results.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:17:47
Downstream:
12.96 Mbps
Upstream:
910 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.0 dB / 5.2 dB
Line attenuation (Down/Up):
28.7 dB / 15.9 dB
Output power (Down/Up):
20.4 dBm / 12.6 dBm
FEC Events (Down/Up):
26417 / 5
CRC Events (Down/Up):
1 / 303
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
31 / 11
Error Seconds (Local/Remote):
10 / 36522
I have also checked if the bell wire was attached and it is not. My socket is of the new type with the inclusion of an inductor on the faceplate. My ADSL filters and modem cable already have the middle connecting pins removed so I don’t think it is a wiring problem, at least in my apartment anyway. I have also searched for problems with the exchange and they are showing green for my area. (Liverpool Central)
I have just rang the quiet line and I do not appear to have any noise on the line. However, all I have is a cordless phone and I know that is not ideal for determining noise due to the radio frequency interfering with the phone speaker.
Again thank you for you time on this issue.
Regards,
Richard -
Broadband connection and speed problems
Hi,
On Wednesday morning my broadband connection went down and could not reconnect from 600am til 700pm. It did manage to get a connection to stay up at around 900pm, but since then the connection has dropped about four times a day.
I have checked my equipment, wiring etc, connected directly to the test socket, using a new ADSL microfilter etc etc. I have also checked for known problems in my area and have done some quiet call tests(17070).
There are apparently no problems in my area, but a couple of the quiet call tests were crackly.
Since last night (Friday) at around 900pm the connection has managed to stay up but my connection speeds, both up and down are much much lower than they used to be.
Since Wednesday night I have performed some BT speedtests.
D/L Profile for my line is - 17.64 Mbps, but actual speed currently varies between around 8 and 11 Mbps.
U/L Profile for my line is - 0.83 Mbps, but speed currenty varies between 0.01 and 0.3 Mbps.
Before Wednesday, my download speeds were typically 16-17Mbps and upload speeds were typically 0.8Mbps.
With very little variation.
I have included some stats from my BT HH3...
Wednesday nights ADSL Line status, after I managed to get a connection to stay up. below;
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 0 days, 04:59:49
Downstream: 18.65 Mbps
Upstream: 443.9 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Fast
Noise margin (Down/Up): 4.9 dB / 26.4 dB
Line attenuation (Down/Up): 11.1 dB / 5.3 dB
Output power (Down/Up): 20.1 dBm / 12.9 dBm
FEC Events (Down/Up): 0 / 0
CRC Events (Down/Up): 758 / 36
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 23957 / 6
Error Seconds (Local/Remote): 300 / 4
Current ADSL line status. After the line being up for 17 hours below;
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 0 days, 17:17:36
Downstream: 19.52 Mbps
Upstream: 443.9 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Fast
Noise margin (Down/Up): 3.2 dB / 28.1 dB
Line attenuation (Down/Up): 11.0 dB / 5.2 dB
Output power (Down/Up): 20.2 dBm / 12.2 dBm
FEC Events (Down/Up): 0 / 0
CRC Events (Down/Up): 133 / 36
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 636 / 9
Error Seconds (Local/Remote): 117 / 4
One thing that stands out is the Noise Margin of 4.9dB and now 3.2dB. I gather that these values are on the low side. Is 3.2dB acceptable?
I assume my line attenuation values are low as I live very close to my local exchange. I assume that these values are good.
There are some CRC HEC and Error Seconds values. I must admit that I dont fully understand these but I assume these are not good.
One other thing worth mentioning is that the phone cable to my property comes along my front wall over from a neighbouring property. Whilst checking this cable this morning in the daylight, I have noticed that someone, most probably my neighbour, has pulled the cable way from its fixing on the wall in order to put a fence post up on the wall.
The fence post has been there for a few months, with no apparent affect ro my phone and broadband, but I'm concerned that this could have damaged the cable, splitting the shielding or breaking a wire in the cable, or perhaps loosened the connectors to the juntion box it is connected to on the neighbours wall.
Could damage to the cable be the cause of my connection and speed problems?
Also, is it possible that my BTHH3 is faulty?
Any advice would be very welcome.
Thanks
Solved!
Go to Solution.A little more information.
I have noticed that on a number of occasions when making or receiving voice calls, the broadband connection completely drops. It doesnt happen on all calls, and doesnt seem to happen when just going 'offhook' and listening to a dialling tone.
There is a definite crackle and hiss on most of the voice calls. But only seems to be audible on the home phone.
After a little browsing, I came upon a logging program "Routerstatshub". When I leave this running it logs changes to ADSL stats.
Looking at the logs, I've noticed that when making voice calls, the upstream noise margin always seems to drop considerably, sometimes down to 0dB.
On some calls, both upstream and downstream noise margin drop to 0dB and the broadband connection drops.
I have also noticed that upstream line attenuation increases from around 5dB to around 28dB every hour or so. This doesnt appear to coincide with the voice calls.
CRC and HEC error increase dramatically at the same time as the noise margin changes. HEC goes up by 10s of thousands.
I'm still directly connected into the mastersocket with a new microfilter and no extension cable.
By the way, my connection speeds went down to an all time low yesterday , 1.7Mbps down.
I have now replaced my DECT phone with a corded phone and will make some more voice calls to see if that makes any difference.
Any ideas about what the problem could be would be greatly appreciated. -
Ipad speed and wifi loss of connection
I updated my ipad 3 to iOS 7 version and it runs so slow now, it is so painful to use that I almost can't stand it, I've noticed the drop in performance, as soon as I upgraded the software.. Can I change it back, is there a fix for this..
Also, the ipad constantly drops its wifi connection since the update, Mysore upgraded his iphone 4 and it also drops the connection...?
Any idea sits very frustratingSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom -
BE 3000 with Jabber (for Mac) and webex connect integration problems
Hi,
This is my first question on the forum so please be gentle!
I have a customer who has a Business Edition 3000 and they have purchased WebEx connect and Jabber integration to go with it.
My problem is I am having difficulty getting the setup to work and I have a number of questions on how to set this up. Most of the docs on Cisco's website seem to be related to either CUCME or full CUCM, but not a lot on BE 3000. My questions are below:
1. I have been reading the documentation for WebEx connect and it states to set the IP address of the BE 3000 server in the Configuration>Additional Services>Unified Communications>Voicemail tab. This is currently on the network with a 192.168.x.x address however. My predecessor put this IP address in the WebEx configuration page but I'm not sure this will work with a private IP as I don't know how this communicates back. The documentation isn't very clear on this. Does this have to be a public IP address / FQDN for it to work?
2. Are there any SRNDs for this type of setup that could help? Again, looking through the website hasn't turned anything up yet.
Note:
we are using the following software:
Jabber for MAC:
uc-client-mac-8.6.7.20127.fcs.zip
MAC OS:
OSX 10.8.3
BE 3000:
MCS7890C1-BE8
8.6.4.10000-15.
Thanks in advance for any help.
Regards,
JasonHi - I have done this via the admin portal but still cannot get the Jabber client for Mac to register for voice. The Windows version works fine for the same user and CUCM device. Are there any other settings that need to be enabled specific to the Mac client?
Thanks. -
Problem with connecting and syncing (quicktime.qts)
Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
TomAppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error? -
Face time not working. When dialled it says connecting and drops immediately. When my friends calling it show connecting but it does not.
Is there a problem with face time. I am in south Africa, it was working perfectly up to Easter. Please help this is my life line.There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself. -
Problem with connection and sessions
Hello,
I have some mobile user that connect to sap with a SAPCONSOLE in a server.
the problem is that when they move the loose the connection and when they try to connect again the sistem promps to keep the connection or cancelled the connection.
How can I avoid this, because in sm04 in some times I got 300 connection from the terminal and in tx session_manager.
Can somebody help us please.
RegardsIn the regular part of the system (I'm not sure about the way you are describing) you can set this parm:
rdisp/max_alt_modes
in your instance profile. This prevents users from signing in over and over again and might help with your problem. -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.
Maybe you are looking for
-
Refering Cells in webi for calculation
Hi, We have done calculations separately in multiple reports. Please let me know as to how to refer/use those calculated values across any report, for example, where we could use a sum of a report (sum is assigned to a cell) which could be associated
-
Can no longer access my .mac website
I have been using iWeb 06 for that last 18 months to publish a website for our family. I have a current .mac/mobileme account that is set to renew on Jan. 18, and I suddenly can no longer access our website (my mobileme email is working fine). It's a
-
I'm currently using OSX 10.6.8, 2.4GHz Intel Core 2 Duo Processor, 2 GB 667 MHz DDR2 SDRAM Memory. I am not able to upgrade the operating system, and the computer still has 67 GB of memory on the harddrive. I don't use it for anything very intense,
-
How to restore 10.3 files after clean install of 10.4
I had Mac OS 10.3 and did a clean install to Tiger (10.4) earlier this year. I thought I backed up my Apple Mail, iPhoto and iTunes libraries but I did not do it properly. I lost my attachments, all my photos and tunes. Is there anything that can be
-
New itunes wont download! *pics included* HURRY HELP!
so i saw that there was a new itunes available, i download it only to see more error messages! i downloaded the standalone quicktime fine but itunes didnt work, plz help me! i got pics to show you, here they are: http://img.photobucket.com/albums/v34