BT is sending all* of their customers through a sp...

Hello,
BT is sending all* of their customers through a specific proxy for specific domain(s).
When they go to a specific website of mine, they are proxied to it via the IP 194.72.9.24, which is located in London, regardless of where they are located in the UK (even if they are up North). The issue is specific to only one of my domains; if they connect to another website of mine, their genuine IP shows like normal, and their are no issues. It honestly is quite baffling.
This is specifically problematic for me because I run a ranking website for websites who want promotion, and they are ranked based on how many votes they receive. I rely on IP addresses to validate if a user has voted or not. These websites send their users to my website to vote if it appears that their IP has not voted that day, and then they are sent back to their website after they have voted and their IP is logged.
Generally this works all fine and dandy, and there are no issues because people can generally be associated with their (genuine) IP for a day, and there are no worries. But when the website asking if a user has voted is sending their genuine IP to check if they voted, and it comes up as no and they are sent to my website and I check their IP has voted it shows up as a different IP, you can see why this is extremely problematic.
I'm not really sure what to do, as this is a major issue, and I can't imagine how this could ever be considered a good idea in the first place. You're literally giving every single user connecting via BT the same identity, which could be extremely problematic even if a specific user were to do something bad, as there's no way to truly know who did it, and everyone with that address would be deemed as harmful subsequently.
In case you are inquiring as to what domain of mine is being affected, it is "retroslist.com"; it shows the same IP (194.72.9.24) for any BT customer connected, as mentioned above. All of other websites that I run do not have this issue.
* While I can't confirm that it's every single BT customer, every one that I have spoken to is proxied through this IP in London when connecting to my specific website.

Your actual IP address will be whatever POP site you are connected to, it can be anywhere in the UK, and has been known to even come from the USA, as BT are global.
That is assuming your website runs on the BT network?
I would not rely on BT updating the Ripe database as to the IP usage. If you want to check if you are on CG-NAT, the bit at the start of this page will give you a clue.Port forwarding problems - just as an indication.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Job to send all user their initial password by e-mail (one for the pros)

Hello,
(IDM 7.2 with MSSQL)
I try to create a job that sends all user their "IDM-PASSWORD" via email.
In the first step, I generate a random password for all user. This password should now be sent to each user so they can log in to IDM-UI.
This is my approach:
1. Step
Define the source
A Job with a to generic pass:
SOURCE:
SELECT DISTINCT mskey FROM idmv_vallink_basic_active WHERE mcidstore=1 AND
((mskey IN (SELECT mcmskey FROM idmv_vallink_basic_active WHERE mcattrname='MX_ENTRYTYPE' AND mcsearchvalue = 'MX_PERSON')))
Destination:
MSKEYVALUE = %MSKEYVALUE%
JOB CONSTANTS:
         MAIL_SMTP_HOST = Host
         MAIL_SMTP_PORT = Port
         MAILATTRIBUTE   = MX_MAIL_PRIMARY
         MAILFROM         = MAIL....com
         NOTIFICATION     = blabla
         POSTTEXT         = </FONT><br><br>
         PRETEXT         = <FONT SIZE=5> blabla
Script for mailing:
function blödesMailding(Par){
var userList = Par.get("MSKEYVALUE");
var user = new java.util.Vector();
user = uSplitString (userList, "|");
var i = 0;
var result;
var emailAddress = "";
var idStore = uGetIDStore();
var emailAttribute = "%$MAILATTRIBUTE%";
for (i=0; i < user.size(); i++) {
     emailAddress = uIS_GetValue(user.get(i), idStore, emailAttribute);
     result = UserFunc.uSendSMTPMessage("%$MAILFROM%", emailAddress, "%$NOTIFICATION% ", "%$PRETEXT% " + "%$POSTTEXT%", "%$MAIL_SMTP_HOST%", "%$MAIL_SMTP_PORT%", 1);
     if (result.length > 0) {
          UserFunc.uErrMsg(2, result + ":Mail to:" + emailAddress);
return "";
And here is the error message^^:
Warning Constant MAIL_SMTP_HOST was not defined in the repository (-1)
Warning Constant MAIL_SMTP_PORT was not defined in the repository (-1)
Warning Constant MAIL_ORIGINATOR was not defined in the repository (-1)
Warning Constant MAIL_DEBUG was not defined in the repository (-1)
Warning Constant MAIL_DEBUG_RECIPIENTS was not defined in the repository (-1)
I set all of these constats in the GLOBAL CONTANTS form ID store!
and here he also complains:
Warning Could not send SMTP message to !ERROR:Entry does not exist using SMTP host mail.mymhp.net
java.net.ConnectException: Connection refused: connect
Warning Could not send SMTP message to !ERROR:Entry does not exist using SMTP host mail.mymhp.net
java.net.ConnectException: Connection refused: connect
Warning Could not send SMTP message to !ERROR:Entry does not exist using SMTP host mail.mymhp.net
java.net.ConnectException: Connection refused: connect
Warning Could not send SMTP message to !ERROR:Entry does not exist using SMTP host mail.mymhp.net
java.net.ConnectException: Connection refused: connect
Warning Could not send SMTP message to !ERROR:Entry does not exist using SMTP host mail.mymhp.net
java.net.ConnectException: Connection refused: connect
Warning Could not send SMTP message to !ERROR:Entry does not exist using SMTP host mail.mymhp.net
java.net.ConnectException: Connection refused: connect
Maybe I made a mistake, or my solution doesn't work at all.
I would be very glad if someone had an idea, or a better solution for this problem.

M Pollicove wrote:
> From the Job Folder you can access global constants, but I don't think you can access repository constants. Re-work the script so it uses globals (making sure to set up the globals) and you should be fine.
Both repository constants and global constants work in jobs, just study your initial loads to see the use of repository constants.
Gerhard, do you have your correct repository defined in your pass/job? If you copy/pasted the pass the original repository might be still in the pass (done this a few times
You should be able to access your global constants in scripts with notation like (without any built-in functions):
var idStore = "%$glb.SAP_MASTER_IDS_ID%";
Edited by: Tero Virta on Jan 13, 2012 9:40 AM

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How come Verizon Wireless will not give their customers a corporate number, email, or address to send complaints?

I have been with Verizon Wireless for 7 years and I have went through more problems in customer service in the last year then I have in my whole 7 years. Usually if I have a problem they fix it immediately, I tend to call instead of going into a Verizon store because Verizon stores just do not care about their customers. I am beginning to think the same thing about Verizon Wireless customer service.
Problem number 1: Verizon Wireless making changes to my account, aka payment arrangements, without my knowledge or consent. Making my phone shut off because I was 3 days late. Yes THREE DAYS... not months. Then after they turned my phone on because of their error I paid my bill. About a couple weeks later I decide that I want to purchase a new phone and want it billed to my account. They then tell me that no I could not have it billed to my account because my phone was shut off for non-payment. I then explained that it was an error, they then told me that they could not over-ride the system and I would have to wait 6 months to bill to my account. I asked if that meant I could bill to my account even if Iam late a couple days or what. They told me as long as my phone had not shut off because of non-payment I would be able to bill to my account, also that they would write a formal complaint on the person who made a payment arrangement on my account without my consent and they would get back to me. That was in Mar of 2013. I am still waiting for a reply from my complaint.
Problem number 2: In March of 2013 Verizon had an email option on their website where you could email corporate and they will email you back. Since then they have taken it off and will not give their customers email, number, or address where they can reach corporate at.
Problem number 3: Sept of 2013, it has been 6 months. I I then call Verizon to bill to my account a new phone, because I wanted to start a new contract. Well they tell me that because I do not pay on the same day of every month I will not be able to bill to my account and they can not over ride the system. I then tell them that this was not what was told to me in March of this year. The rep tells me that she cant do anything for me except investigate it and get back to me within 4 hours. I say okay and leave my number I wanted to be reached at, I asked if she was sure that she was going to call me back because I have been told in the past by verizon wireless reps that I would receive calls from them and they never bothered to return my call, because basically I was un-important. She stated that she would and she appreciated the business I gave Verizon for the past 7 years. (she was a supervisor by the name of Jeniffer in customer service on the east coast). 5 hours later I still had not received a call so I call back and ask to speak to a supervisor they then tell me that my claim was denied for "unknown" reasons about the call 6 months ago and they were not going to let me bill to my account and they couldnt help me further. I asked for a a corporate number, email, or address and they told me repeatedly that they did not know them and could not give them out if they did know them. That if I had a complaint he could notate it and make sure it was handled. Psssh just like it was handled 6 months ago. I daid thank you but no thanks and ended my call soon thereafter.
It just galls me that Verizon treats their customers who make them money by using their services and phones every year. They do not have any care for the complaints and actions of their workers as well as their customers.
I just want to know it anyone knows they corporate number, email or address??
Or maybe a verizon rep out there (which I pretty much doubt will respond to my question)
If I dont receive an answer soon I believe... no i KNOW I will be taking my $127.33 else where and maybe just maybe I can get better customer service, even if its just a tiny inch better than Verizons.
AT&T here I come.

yesterday i went to verizon with a 8 day old broken phone after 40 mins in line to be helped the sales staff at glenway av in cincinnati turned me around and sent me out the door without solving my problem or returning my less than 14 day old phone. i called corporate at >>removed<< they called the store and made an appointment with the manager to resolve my issue. when i returned to the store i was told i had to wait in line again so i decided to get loud enough for every customer in the store to hear what kind of customer service i was recieving. so then the employee at the door not the manager called the police on me and threw me out of the store so today i am returning my phones and am seeking other service providers but anyhow the corporate number i provided is a good one and the people you reach will solve your problem corporate level is does do a grat job but the customer service level and store level employees i have found to be very unproffessional and extreemly mismanaged.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

Creation of transport rule to send all external mails through a particular server for a specific user..

HI,
In our Organisation We have a question, is there any possibility to create a transport rule for sending all external mails through a particular server by a specific user.
in our organisation we have exchange 2007 one mailbox server and two hub transport servers...and we are using symantic gate way..

Hi,
Based on my knowledge, we can use the following transport rule to make that except with one user, other users cannot send outbound external emails:
And I’m afraid that there is no Exchange feature to make one specific HUB server rout all external emails.
Because if a Send connector is configured to send messages to an external domain, any Hub Transport server in the organization will route a message for that domain to a source server for that connector to be relayed to the destination domain.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Dunning to Customers through email

Hi Friends,
I have configureed for dunning it is working fine
and we want to send the dunning letter to the customers through the email
i have provided the email address of the customers in the customer master data
but is there any other setting that should be done so that mail will be sent to customers
Please help
Thanks in advance

Hi Srikanth.. the following notes can guid u .. just check step - by - step ....
The follwing note sre also useful for running the dunning programme
This information may useful to u for dunning...
The dunning wizard enables you to create and send letters to customers that have not paid their debts within a given time range and to remind them of their overdue payments.
In addition, the dunning wizard keeps track of a customer's "payment behavior" in the database to deliver this important information to appropriate organizations.
The dunning wizard considers the following transactions and documents:
1.Open A/R invoices (including partially paid and partially credited)
2.A/R credit memos
3.Manual journal entries with at least one row posted to a customer
4.Opening and closing balance transactions
5.Incoming payments
To access the wizard, choose Sales - A/R Dunning Wizard.
Prerequisites:
To run the Dunning Wizard, you have defined the dunning levels and the dunning terms as follows:
You have defined the dunning levels by choosing Administration > Setup Business Partners > Dunning Levels.
2. You have defined dunning terms in Administration > Setup> Business Partners > Dunning Terms. The dunning terms are based on dunning levels, and contain parameters and values required for the dunning process run.
You have defined the default dunning terms in Administration > General Settings > BP tab > Default Cust. Dunning Terms.
You have defined dunning terms for customers. (Choose Business Partners Business Partner Master Data Payment Terms tab Dunning Term field.)
You have used the following options to exclude any relevant A/R invoices from the dunning process:
? To exclude a specific invoice, display it before you run the wizard. On the Logistic stab, select Block Dunning Letters. You can deselect the option later to include the invoice in the future dunning process.
? To exclude all invoices created for a specific customer from the dunning process, display the Business Partner Master Data record for that customer. On the Accounting tab, select Block Dunning Letters.
Process:
You choose Sales - A/R > Dunning Wizard
and follow the steps listed below. In each step you choose Next to proceed to the next step of the Dunning Wizard, choose Back to return to the previous step, or choose Cancel to cancel the Dunning Wizard creation
Step 1: Wizard Options. You select whether to run a new Dunning Wizard or to load a saved one.
Step 2: General Parameters. In this window, you modify a name of the default Dunning Wizard and choose a dunning level.
Step 3: Business Partners - Selection Criteria. You choose a range of customer codes for the Dunning Wizard.
Step 4: Document Parameters. In this window, you enter the range of the posting dates to include in the Dunning Wizard. In addition, select the relevant document types.
Step 5: Recommendation Report. In this window, you enter a new due date and select invoices that are included in the Dunning Wizard for each customer.
Step 6: Processing. In this window, you select one of the following options to process the Dunning Wizard:
? Save Selection Parameters and Exit
? Save Recommendation Report as Draft and Exit
? Print Dunning Letter and Exit Result:
If you print dunning letters, SAP Business One creates the dunning letters and saves the dunning run. In addition, the dunning level and the last date of the dunning letter are updated for invoices included in the dunning run. When a dunning letter is created for a customer, the business partner master data record is updated. On the Accounting tab, the Dunning Date field displays the date on which the dunning letters were created for the last time.
To view the history of dunning letters and the list of all invoices, choose Business Partners > Business Partners Reports > Dunning History Report.
Assign points..
Tahnk u
Dasharathi

Is there a way to send a large video file through email, not using websites?

Hey guys,
Just wondering if there is an easy way to send a large video file through email, not using websites such as yousendit.com.
If anyone knows please respond, would be greatly appreciated! Thank you

No there isn't. Most all Email providers, whether your ISP or some other provider like Google, Yahoo, Microsoft with their Outlook.com or Office365 and Apple's own iCloud system, have a linit on the max size a email can be. Most are around 10MBs some slightly larger but if the vieo you want to send to someone it larger than that you will have to upload it to a website and then have the people you want to view it download it from that website.

How can i use an existing vpn connection without using the option "Send all traffic over vpn connection"?

I have been trying to get my computer (os x.7) to astablish a remote desktop connection to my work computer via a vpn tunnel. In fact I have just discovered that it works fine if i select to "send all traffic over vpn connection" from the options in the advanced setup of the vpn.
If the option is selected microsofts "Remote desktop connection for mac" works just fine. However without selecting the option it is not taking advantage of the tunnel but tries to connect as if the tunnel would not exist.
Now the question is how do I get program to use the vpn tunnel without checking the above option?
Thanks for any hints and pointers.

Then can her computer be authorized to both accounts?
Absolutely. You can authorize any given computer to up to five iTunes Store accounts.
If purchases are made on her account, to a computer authorized to my account, can I put those songs on my iPod?
If you connect your iPod to her computer, yes. Tracks download only to the computer from which they're purchased, regardless of which iTunes Store account is used for the purchase. Or you could copy the tracks from her computer to yours and then authorize your computer to her iTunes Store account. But that's sort of defeating the original purpose, it would seem to me.
is it better to buy music through Amazon downloads and/or actually purchasing CDs to avoid the security features iTunes puts on its music?
That's certainly an option. If it's an entire album I want, I buy CDs. That way I can import them at the quality I want and to whichever of my systems I want. Amazon or one of the other download stores that offer tracks as MP3 are also an option, though for me download stores are best when you just want a couple of tracks off a given CD.

When i updated itunes I lost all my music, I was able to retrieve it from my previous version, but now a artists have all of their songs list under one unknown cd. How can I seperate these cds with the correct songs included?

When I updated itunes I lost all of my music, I was able to retrieve it from a previous itunes library, but now some artists have all of their songs listed under one "unknown album." Is there a way to separate these songs back into the correct albums? Also, is there a way to make songs that have a featured guest just show up with the rest of the album instead of making a whole new spot for it? Thanks!

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

IMessenger is sending all messages to every device on my account!!

My Wife, I, and our cousin are on the same family plan and share the same iTunes account on our iPhones. Because of this iMessenger is sending all messages sent or received with iMessenger to all 3 phones!! Is there a way to add an additional email addresses to my iTunes account to fix the issue?
setting up a different iTunes accounts per phone is out of the question.

Have each member go to their device and go to settings, messages, you will see an options that says 'receive at' you will see the apple ID on the top and 'email' further down, have each person add their own email on 'add another email' apple will send them an email at that email for verification, after the email has been verified go back to each device and go to settings, messages, receive at, you should see two emails there now, click on the old email and click remove this email, now each of you will receive iMessage using your own email, hope this helps.

Error while trying to send a report link/page through email

Hi,
I was trying to send a bam report url through email but the following error occurs when i click on send button :
The Message Center component is not configured correctly.The "Email Account for Alerting" field isn't specified correctly.Contact your system administrator to fix this
Anyone help me by giving a solution
Thanks in advance

Hi, firstly I would like to ask whether, are you trying to send report URL in an alert mail? If it is so, then you have to configure your SMTP settings in your 'Message Center'. The steps to configure are as below-
To configure the Message Center settings:
1. Select Message Center Management from the drop down list.
Some table cells are blank the first time you install the Oracle Business Activity
Monitoring applications.
2. Click Edit.
3. Enter the mail server machine name or IP address in the SMTP Server Name field.
The mail server must have the capabilities to send email to other SMTP servers
that Active Viewer users specify in their personal settings.
4. Enter an email account including the domain used by the Oracle BAM service in
the Email Account for Alerting field. This is the account that will appear in the
From header of e-mailed alerts.
5. Click Save to save your changes.
6. Restart the Oracle BAM Event Service to make the changes effective.
Let me know if this helps. If this is not the requirement, please mention your requirement precisely.
Harsha.

Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of th

Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of them say they have Flash player on their PC and somehow they still can't hear, some say their Google Chrome browser tells them they've already got one flash player while they try to download one. For me, I had to download two versions of Flash player to be able to access to the audio. I don't know what the problem is, is it because it's the latest version of Adobe Acrobat XI pro that people with older version of Adobe reader or flash player can't open it properly? Or is it something else? How can I make sure every customer with different system can access to my books? Hope to hear from you ASAP! Thank you very much.

And how are the customers accessing the PDFs?
What devices are they using?
What program or apps with versions are they using?
I this age of other then PDF eBooks formats and reader program and apss for computers and mobile devices for these formats I would look at creating the books in one or more of the eBook formats.
Google Chrome and FireFox both have their own version of a PDF reader plug-in and they are well known to be less capable than Adobe Reader. It is possible to configure these products to use Adobe Reader.

How to send E-Mail Notification executing through workflow?

hi All
I want to send E-Mail Notification executing through workflow in MDM Data Manager?
I have tried it, But still i am unable to send E-Mail Notification?
i will explain, how i have tried?
1) I have created the simple workflow with the following components
they are in sequence
start--> process-> notify--->stop
2) owner of the workflow is Admin and launcher of the workflow is Admin and i have given email id to the Default Admin user in the console.
3) i have created another user (i.e. User2) with default roles as like as Admin and i have assigned User2 to the process component in workflow and I have created e-mail address for the User2 in the console.
4) i have created another user(i.e.User1) with default roles as like as Admin. and give e-mail address,under the notify component User1 is selected in To Field.
5) stop component as usual
coming to configuration part about the SMPT server in MDS.ini file
1) in mds.ini file for the MailServer=, I have given SMTP Server name once and restarted the server and executed the workflow, but not worked
2)in mds.ini file for the MailServer=, i have given SMTP Server IP Address and checked the port,and we have configured the host file also and restarted the server and executed the worflow , but not worked
In all the ways i have executed and tried to send E-Mail Notifications through workflow, But I didn't
can any one help where i have went wrong, so i can rectify it
what actually we have to give in mds.ini file? is any other cofiguration required for it?
if any one have any solution for it , can you please explain me in step by step
Thanks in Advance
bharat.chinthapatla

Hi Bharat,
your steps seems to be correct. Just try to ping your mail server, to verify if your mail server is running up, besides note that mdm go throw port 25 for sending emails, so please check if you are able to send emails using port 25 in your network.
Regards,
Vito

Need to send Smart form via email through Driver program

Hi All,
We need to send smart form via email through a new driver program (z program). Can you please guide me on this.
I have used the following code to achieve this. We are getting message saying 'Mail request has created' when executed, but the mail is not sent.
lvs_comm_type = 'INT'.
lvs_comm_values-adsmtp-SMTP_ADDR = e_mail.
lvs_comm_values-adsmtp-R3_USER = 'X'.
lvs_comm_values-adsmtp-ENCODE = '0'.
call function 'CONVERT_COMM_TYPE_DATA'
exporting
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_screen = ' '
pi_newid = 'X'
importing
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = p_mail_recipient
pe_mail_sender = p_mail_sender
exceptions
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
others = 4.
if sy-subrc ne 0.
raise COMMUNICATION_ERROR.
endif.
control_parameters-device = 'MAIL'.
output_options-TDIMMED = 'X'.
output_options-TDDELETE = 'X'.
CALL FUNCTION fm_name
exporting
CONTROL_PARAMETERS = control_parameters
MAIL_RECIPIENT = mail_recipient
MAIL_SENDER = mail_sender
OUTPUT_OPTIONS = output_options
USER_SETTINGS = space
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
Thank you

Hi,
For sending smartform output into mail you first have to generate spool request and convert it into PDF and then
only it can be sended into mail, please find the sample code in the mail below:
http://wiki.sdn.sap.com/wiki/display/sandbox/ConversionofSpoolRequestDataintoPDFandExcelFormatandSenditintoMail
Mansi
Edited by: Matt on Jan 29, 2010 8:25 AM - removed code, instead point to wiki that Mansi authored.

Need to send 32 packet within 15ms through UDP

Hi all,
I need to send 32 packet within 15ms through UDP in labview 2012. Each packet carries 2560 bytes. If it can able to send all packet within 7 or 8 ms, then it should wait upto 15ms and again it should repeat the same.
Please, anyone help me.
My code is as below.
Thanks,
Attachments:
DAC_labview.zip ‏49 KB

I wouldn't go that far, Shane.
I think that there is some confusion/misunderstand around this topic.
YES, you can use LV to send data using UDP and TCP to other systems.
NO, UDP by itself does not ensure lossless data transfer. So UDP can lose packets. That is something which LV cannot influence by any means. TCP is a lossless protocol which should be used if you require the security.
NO, neither TCP nor UDP are deterministic. So even if the packages you are sending are sent within a time x ms, there is no one garantee of any means that this happens EVERY time. Sometime packages might take a multiple of this time.
NO, transfer times are not influenced by the sending PC at a primary level. It all depends on your network; if the network sucks, using UDP packages are lost. If using TCP, packages are resent, so it also depends on sender and receiver alike.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

BT is sending all* of their customers through a sp...

Similar Messages

Maybe you are looking for