Budget not displayed in KE80

Hi,
i have entered a budget (input planning) with Tcode KP06, i show it by Tcode : S_ALR_87013611 but not with Tcode : KE80
Please why this budget is not displayed by KE80 ? is there any configuration to do for that ?
Please help
Regards.

Please do not log the same issue more then once and into different forums - crossposting. Thread closed and points assigned to Eli...thanks.

Similar Messages

Report Does Not Display Data from Non-BCS Cube

Hi,
I have the following scenario.
I have a MultiProvider with two real-time cubes. Cube A is used to store Actual data and Cube B is used to store Budget data.
Cube A is used by BCS, so the real-time load behavior is set to "Real-Time Data Target Can Be Planned; Data Loading Not Alllowed".
Cube B is not used by BCS, so data is being loaded using BW InfoPackages, with real-time behavior set to "Re-Time Data Target Can Be Loaded With Data; Planning Not Allowed"
My BCS has two Consolidation Group hierarchy. One is for Legal reporting and another one is for Business Segment reporting. So, if I have a Consolidation Unit, COMPANY1, it would belong both hierarchies, e.g. LEGAL1 and BSEG1.
In my query, I have no problem displaying Actual data when I specified Reporting Mode (0BCS_REPMOD) = Standard. (S). However, Budget data does not get displayed. FYI, I have uploaded data twice for each record i.e. LEGAL1 and BSEG1 in the Cons Group (0SEM_CGCOMP) characteristic.
Any idea on how can I get the budget data displayed?
Thanks.

Hi,
Have you Identified Characteristics and Selected Key Figures:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cf/bc734190ba137de10000000a155106/frameset.htm
Without proper construction of multiprovider you'll not be able to see both cubes.

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Autual cost line items not displaying in cji3

in sap ps when i tried to see the autual cost line items, but it is not displaying in cji3 ?
Can anyone provide me the solution.waiting for response?

Thanks 4 the rply, problem solved.
The problem was due to overall budget planning. when i planned year wise it was solved.

Header tags disappear - do not display when uploaded to server

I have a website that contains H3 tags will not display. Does anyone know what would cause the tags not to work?
<div class="services_icon1"></div>
<h3>Initial Evaluation</h3>
<p>
This is considered our initial meeting with you, to brainstorm and review website design, functionality, budget and timing objectives. We prefer face-to-face, but we can also accomplish the same tasks through email, web conferencing and telephone.
</p>
<h3>Design and Build</h3>
<hr /> <p>Our website designers begin coding individual pages, functionality is programmed, and site copy content is written and added, completing the design phase. </p>
<hr />

Validate your page here:
http://validator.w3.org/
number of errors including :
Line 158, Column 12: document type does not allow element "h3" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<h3> Key Features</h3>
✉
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
even though the current page does display the <h3> tag... validator doesn't like it
Adninjastrator

Substitution string used in custom Report column name does not display in PDF version of report

I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
Pat

First, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

XL Reporter Do Not Display Blank Records

hey all,
I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02. However, when I uncheck "Do not display blank records," the generated report lists an instance of each account for each segment that I've chosen in the parameters.
The selections for the account segmentation don't seem to filter the accounts themselves, instead they filter the balances of each account. Does anyone know why it only filter's the balances rather than the accounts themselves and ends up repeating the accounts for each segment selected? Is this a bug?
thanks in advance!
Kevin Lee

Hi Kevin,
Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
In case the question is still open:
I would recommend that you try these forums - which should fit better:
For SAP partners only there's a forum where you can discuss implementation questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
...or you might try your luck with SAP Support?
Bugs should anyway be reported to SAP Support!
HTH
Frank

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

Floating fields and fragment subforms in Outlook 2007 do not display correctly

I'm using LCES Forms 8.0 Update 1 to render a non-interactive HTML forms using dynamic content (customer info). The email appears ok in clients except in Outlook 2007.
The Floating text and Text Fields appear multiple times on the form (scattered around their placement point on the form) and the subform fragments are appearing with borders surrounding them.
I have heard that there are issues with Outlook 2007 not displaying HTML correctly. Is there a way to setup the Text Fields/Subforms in Designer so they display correctly in Outlook 2007?
Thanks!

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Pictures not displaying in non-thumbnail sizes

One of my clients has an iMac G5 running 10.4.11 and iPhoto 5.0.4. He's got about 3200 pictures in his iPhoto library which is about 12GB in size (they are all very large pictures). He's been using iPhoto without problem for years then suddenly he noticed that some pictures do not display in a slideshow. Out of the 3200 pictures he's narrowed it down so far to a few dozen pictures throughout his library. When we view the roll or the album with the pictures listed as thumbnails, we can see the picture just fine, but when we do anything that involves viewing at non-thumbnail size, such as double clicking on it or viewing in a slideshow it displays nothing. Slideshow just shows all black and double clicking on the thumb shows white with a spinning gear that never stops spinning. I rebuilt his library and that did not fix it. I repaired permissions, trashed iPhoto preferences, deleted tmp & cache files from his computer, I even zapped the PRAM out of desperation and nothing made any difference at all. One weird thing is that when it is siting at the white screen with spinning gear, if we resize the window smaller then resize it bigger, the picture will display properly but only for that time. It still will not display in slideshows.
I tried exporting one of the troublesome pictures out of iPhoto to his desktop, delete the pic from iPhoto, then try re-importing it again. This time when we try to import it, iPhoto gives an error that the file couldn't be imported because it may be an unrecognized file type or may not contain valid data. I can open the pic on his desktop using Preview and Photoshop with no problems at all.
Why am I posting this in the iPhoto '08 forum? well I copied the file to my MacBook Pro running 10.5.6 and iPhoto '08 and it almost does the same thing. I am able to import the file into iPhoto '08 and I can see the thumbnail but when I double click it, instead of a white screen with the spinning gear, i get a black screen and nothing else. I tried the trick of resizing the window and as I'm resizing, I do see a blocky image but as soon as I stop resizing the image goes black.
I can open the file in any program on multiple computers: Photoshop, Preview, GraphicConverter, ColorSync Util, Safari, Firefox, etc. iPhoto version 5 and '08 (the only versions I have handy) refuse to work with the file. I've even edited the picture in photoshop by changing the resolution by just a few pixels and slightly tighter jpg compression but iPhoto still refuses to play nice with it.
I have exhausted all options other than reinstalling the OS, but other posts I've read similar to this say that never fixes it. I am at a loss. What is wrong with iPhoto that it refuses to play nicely with pictures that work everywhere else in the world?
I forgot to add that in Console there are several instances of iPhoto errors:
"have info and image but no ciimage" and “have info and image but no ref”
Message was edited by: Clint Mcintosh

Clint:
Try opening the file in one of the other applications that can use it and save as a new file and see if that new file is compatible with iPhoto. Or you might try this Automator workflow, Convert to JPG and Embed sRGB profile, on one and see if the resulting file will work. If so you can batch change all of them. It replaces the file you run it on so be sure to run it on a copy just to be safe. You can download it from Toad's Cellar or download it immediately with this link: Convert to JPG and Embed sRGB profile.zip.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in it's rebuild library window, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Images not displaying at their normal size, and not all keywords displaying, why?

Not sure what's going on inside Adobe Bridge CC 2014.1, but why is it that my images are not displaying at full size. Bridge says they're displaying at 100% but I know that's not the case, because when I open the same images in Mac OS Preview (OS 10.10.1 Yosemite) at 100% they're much bigger. Is there a viewing preference setting I'm missing?
Also, I use Bridge and Photoshop on two mac pro desktops: one at my office and one at home.
At work, I created more than 30 keywords in Bridge for several hundred images that reside on my external thunderbolt hard drive. But when I take that hard drive home and connected it to my home mac and then open Bridge, only a handful of keywords appear. I don't see the full list of keywords that I created at work. But in Bridge, I didn't see any option to save or export keywords as a file.
Although the image metadata does appear, because whatever keyword i assigned to an image at work does display on the home mac, I just don't see the entire keyword list.
Can or should Bridge therefore only be used on one computer? Is it not possible to transfer the entire Bridge keyword list from one mac to another?
Thanks in advance for any help feedback with this.

Hi Zenos,
I've discovered what is causing the problem, but I still need a way to fix it, if possible.
The cause of the problem is that in Windows 7 Control Panel > Display I have set the size of "text and other items" to 150% (otherwise everything is much too small too read on my screen's recommended resolution of 1920×1080).
I discovered that Irfan Viewer was also displaying at the incorrect resolution, but I managed to solve that problem by right-clicking on the IrfanView.exe icon and following Properties > Compatibility and selecting "Disable display scaling on high DPI settings".
I tried the same procedure with Thunderbird, but it made no difference. It is still displaying at the incorrect resolution.
Any suggestions?
Regards,
Catsix

Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

Not displaying the data in to the table..wht is the issue

I have problem for the displaying the RFC Model object date in to the table.
I have created the Table in the view, Then i have choosed the "create binding" option in the outLine window to map the perticular RFC model object to the Table to display. The data is not displaying in the table . But the RFC model object contains data. when i am trying to display with MessageMaganger.reporSuccess(). it is diplaying the data.
Can any one tell me what is the issue.

First, in your view layout in NWDS, look at the tableview, do you see fieldnames in the columns and rows. If so, then I believe that you have bound correctly.    Also, in your executeBAPI method, make sure that it looks something like this.
    public void executeBapi_Gl_Acc_Getlist_Input( )
    //@@begin executeBapi_Gl_Acc_Getlist_Input()
    try{
         wdContext.currentBapi_Gl_Acc_Getlist_InputElement().modelObject().execute();
    catch (Exception ex)
              ex.printStackTrace();
<b>    wdContext.nodeOutput().invalidate();</b>
    //@@end
Regard,
Rich Heilman

Budget not displayed in KE80

Similar Messages

Maybe you are looking for