Bug: Export dpi not set correctly
Export image as jpg
set the constrain maximum size say 6 x 4 inches.
set the dpi, in my case 402 dpi
export the image.
Open the image in PS (or other editor) and look at the image size.
LR has correctly resampled the image but hasn't set the dpi/resolution metadata correctly, it leaves it as 75dpi.
In PS, what is the Pixel dimension of the image? if it is very large, then put in 402 and you will see the pixel dimension you want closer to the 6 in by 4 in you want.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/
Similar Messages
-
BKI0008E: The environment variable BI_CALLER is not set correctely. The cur
Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
Found keyword 'TIMEOUT_FAILURE' with value '1800'.
Finished reading of the Backint for MaxDB configuration file.
Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
Using '1800' seconds as timeout for Backint for MaxDB in the case of success
Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
Setting environment variable 'BI_REQUEST' to value 'NEW'.
Setting environment variable 'BI_BACKUP' to value 'FULL'.
Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
Asking for state of database.
2009-10-22 02:06:09 Database is still preparing the backup.
Waiting 1 second ... Done.
Asking for state of database.
2009-10-22 02:06:10 Database is still preparing the backup.
Waiting 2 seconds ... Done.
Asking for state of database.
2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
2009-10-22 02:06:12 The backup tool is running.
2009-10-22 02:06:12 The database is working on the request.
2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
2009-10-22 02:06:17 The database is working on the request.
2009-10-22 02:06:27 The database is working on the request.
2009-10-22 02:06:42 The database is working on the request.
2009-10-22 02:07:02 The database is working on the request.
2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
2009-10-22 02:07:17 The database has finished work on the request.
Receiving a reply from the database kernel.
Got the following reply from db-kernel:
SQL-Code :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
Have encountered error -24920:
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Constructed the following reply:
ERR
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
Removing data transfer pipes.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
Removed data transfer pipes successfully.
Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
Data Protection for mySAP(R)
Interface between BR*Tools and Tivoli Storage Manager
- Version 5, Release 4, Modification 0.0 for Linux x86_64
Build: 303 compiled on Nov 16 2006
(c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
usage:
backint -p <par_file> [-u <user_id>] [-f <function>]
[-t <type>] [-i <in_file>] [-o <out_file>] [-c]
where:
<user_id> backint utility user
<function> backup | restore | inquire | password | delete
<type> file | file_online
<par_file> parameter file for backup utility
<in_file> name of a text file that defines the objects
default: STDIN
<out_file> Pool for processing messages and the results
of the executed function.
default: STOUT
BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
BKI0021I: Elapsed time: 01 sec .
BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.Also, is there any specification about the user permissions and about how the backup should be run?
-
HI Friends,
I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
The dependency is not configured in schema resource. Possible reason one or more import/include is not set
correctly.
Here is the snippet of the XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace=""
xmlns:mfl="http://www.bea.com/mfl"
elementFormDefault="qualified">
<xsd:import namespace="http://www.bea.com/mfl"/>........
Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules and imorted this XSD into my eclipse workspace.
Then i added the schemalocation attribute to the Import element. which looks something like below:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace=""
xmlns:mfl="http://www.bea.com/mfl"
elementFormDefault="qualified">
<xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
After doing these changes also am getting the same error... can anyone help me out of this????Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj -
Profile parameter icm/host_name_full is not set correctly
Hi All,
I am working on Solution Manager 4.0. When I execute TCODE "SOLUTION_MANAGER", it gives the following error:
Profile parameter icm/host_name_full is not set correctly (see long text)
When I click on "Long Text", it gives me the following message widow:
Message Number: SOL_GRAPHIC002
Diagnosis
The graphic cannot be displayed, since the profile parameter icm/host_name_full is not set correctly.
Procedure
Set the profile parameter icm/host_name_full correctly.
For more information, see SAP Notes 434918 and 677118.
I have referred to both the notes above. In note# 434918, it says that I need latest kernel patch (which is 150).Also the icm/host_name_full parameter parameter was not there in Solution Manager, so I created in the following manner:
Parameter Name =icm/host_name_full
Parameter Value=smgdcs1s.example.com
But however, the error continues to be the same.
Kindly help me asap.
Thanks in advance.
Regards,
FaisalHi Markus,
Earlier the profile was activated and server was also restarted. However, it was not efffective.
Now once again i have activated the profile and restared the server. Now I am able to see the profile and it value in
RZ10
RZ11
Thanks a alot for your valuable inputs
Thanks and Regards,
Faisal -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
Error: property is not set correctly for User Defined Fields.
Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
satHi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat -
User mapping is not set correctly..!
Dear Guru,
I am working with portal 6.0 SP9, and when I try of create user, the application return "Could not create user" and I am use the user j2ee_admin. This user have admin role
I think that the user mapping is not set correctly or the permission is not correct.
The questions is: How can I user mapping set correctly?
Thanks
DyHi Dayana,
Maybe the user name is shorter than 5 characters?
Yoav -
Hi,
I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA to SQL2012.DatabaseB.TableB to without
any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
Please help!
Thanks
EdwardHi Athur,
Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
USE msdb
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = ',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
So I have a question: Do I have to create a new user account that can access our network named
PS: Below are the steps I followed the article:
--Script #1 - Creating a credential to be used by proxy
USE MASTER
GO
--Drop the credential if it is already existing
IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials')
BEGIN
DROP CREDENTIAL [SSISProxyCredentials]
END
GO
CREATE CREDENTIAL [SSISProxyCredentials]
WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser',
SECRET = N'abcd@0987'
GO
--Script #2 - Creating a proxy account
USE msdb
GO
--Drop the proxy if it is already existing
IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo')
BEGIN
EXEC dbo.sp_delete_proxy
@proxy_name = N'SSISProxyDemo'
END
GO
and the rest of the script 2 hasn't been proceeded due to error:
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = N'SSISProxyDemo',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
--To enable or disable you can use this command
EXEC msdb.dbo.sp_update_proxy
@proxy_name = N'SSISProxyDemo',
@enabled = 1 --@enabled
= 0
GO
Please advise me!
Thanks,Edward -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
Exported Colors not displaying correctly
I have illustrator files that I have imported into InDesign but cannot get them to export correctly.
I need everything to remain as RGB files.
The colors look extremely muted, very dull.
Color settings are synced:
N. America Gen Purpose 2 - all defaults
Export settings:
PDF/X-4
Output: Color:
No Color Conversion
What am I doing wrong? When I export a jpeg it does the same thing - totally useless colors!
Exporting from Illustrator looks beautiful without any problems. I've read countless other people's problems with this but have yet to find a solution.
ThanksYOUR default InDesign workspace is CMYK because you have not set YOUR preference for all new documents to RGB. (OK, out of the box ID is defaulted to CMYK because it is a page layout program, historically and best suited for commercial prepress, and suits most users needs.)
ID has the abilty to work with RGB colored images or text; if it decided to change color modes merely by my placing a RGB image, I'd be pretty upset.
BTW, your referenece that you usually work in RGB...tell me, are your swatches cmyk or rgb? -
AD attributes and passwords not setting correctly
I am running FIM 2010 R2 build 4.1.3479.0 with AD servers at 2008 forest level. I have set up the ADMA for staff to set passwords and the userprincipalname attribute (among others). I have custom code in the MVextension.dll that does this. I
am having two issues going on that I believe to be related somehow.
1) These initial passwords are not being set and
2) although the userprinciplename attribute is set correctly when you look in ADUC on the "Attribute Editor" tab, it is not being displayed correctly on the "Account" tab. The User logon name and the upnsuffix fields are blank.
The pre-win2k fields are displaying correctly.
I have done a lot of work trying to figure out what is going on here and I have checked that there are no issues with rights in AD and the code. I have another ADMA that populates a different set of users in another OU and that fills out the UPN and
password and everything works as it should. The code differences between the two areas are very minimal.
The code for this is as follows:
csentry["userPrincipalName"].StringValue = mventry["accountName"].StringValue + emailExtension;
if (mventry["user_InitialPassword"].IsPresent)
csentry["unicodePwd"].StringValue = mventry["user_InitialPassword"].StringValue; // defaultPassword;
else
csentry["unicodePwd"].StringValue = Custom_Extensions.Custom_Extensions.GenerateRandomPassword();
Any ideas what to look at to try and figure out what the heck is going on would be really helpful please!
Thanks
EricaThere are no errors on creation of the user. There are no errors if I log in as the service account and try to change the password.
The emailExtension variable is the same as the one that works for the other users that work. -
BUG: Speed Dials not functioning correctly when Option button is last used
There is a bug in WebOS where Speed Dials do not work correctly. Holding down your speed dial favorites button will not place the call. This happens when the option key is used in launcher or card view before attempting speed dial.
For instance if your last character of a search you did 4 hours ago on your phone contained a series of numbers and you locked the option key to do so, (or even if you accidently hit the option key last and then did not need it) then an attempt to use speed dial "G" will not work, as your Pre/Pixi thinks you are holding down the "6" key and not the "G" key.
This needs to be remedied (for instance have the option key press clear out or unlocked as soon as the search is performed or cleared off of the phone) because there is no way to tell what state the option key is in before using a speed dial (not that I want to check and fiddle with it anyway).The Z and B keys are the * and # keys. That is why they are not in the speed dial list. Hmmm... while it might be a "bug" at this time your the only person having this issue as far as I can tell. Since the issue moved to another phone it could be that its related to your Palm Profile. I unfortunately cannot replicate this issue but would like to test something. Can you do a Partial erase on your device and create a new Palm profile? This will see if the issue is still on the device.
If it is not then the issue is within your Palm Profile. If that is the case I can help you from there. Please post back when you tried this step. -
Default export location not set to pbk file location
(Pixel Bender 2.1.432154 On Windows 7 64-bit)
After opening an existing .pbk file and going to 'File>Export Filter for Flash Player...', the default location is [Username]\Documents\Adobe\Pixel Bender in stead of the location of the file you are trying to export. Only when you do 'File>Save Filter As', the default export location is set the same as the location of the file.
Is this intentional?
I would prefer the 'Export Filter for Flash Player' to always use the location of the file you are trying to export, not just after you did 'Save Filter As'. It would save me some time .
- RC-1290'Dreadnought'
P.S. since Pixel Bender 2.0, the GPU mode not functioning, using ATI HD3870 or ATI HD3200. fine with my HD3870 and my HD3200Ah, I see, when you open PixelBender first then go to to 'Open Filter' and navigate to where your filter is saved, everything works fine.
I usually double click the pbk files through Windows Explorer, or open them from the Project Explorer in FlashDevelop (which opens the file as if it was opened through Windows Explorer). So it seems like this happens when you haven't 'visited' the pbk file through the explorer in Pixel Bender (like 'Open Filter' and 'Save Filter As').
I have the files saved in a project folder ('Z:\Users\[Username]\Documents\Flash\Procedural\Terrain generator\bin\Shaders', Windows 7 is installed on 'Z:\')
So you should be able to replicate the problem by navigating to a pixel bender kernel file that is saved in a non-default location, with Explorer or equivalent. Then choose 'Export Filter for Flash Player'. Which will then show you 'Z:\Users\[Username]\Documents\Adobe\Pixel Bender' in stead of the location where the pbk file was saved. And even though 'Save FIlter As' makes Pixel Bender Remember the last used location, 'Export Filter for Flash Player' does not. Or at least, not for me.
I hope this helps .
- RC-1290'Dreadnought' -
IV_REVERT not set correctly
Hello,
let's assume the following scenario (two UIBBs - > A and B):
1. UIBB A executes process_event with failure and sets ev_result to 'FAILED'
2. UIBB B process_event is not executed
3. AFTER_FAILED_EVENT is executed
a) first in UIBB A (iv_revert = '')
b) then in UIBB B ( iv_revert = 'X')
This seems to be fine. Now the failure is in UIBB B:
1. UIBB A executes process_event successfully
2. UIBB B has failed and sets ev_result to 'FAILED'.
3. AFTER_FAILED_EVENT is executed
a) first in UIBB A (iv_revert is false)
b) then in UIBB B ( iv_revert is false)
I'd assume that iv_revert is set to 'X' for UIBB A, but it isn't.
Any opinion on that (system 700 SP18)?
Thanks and regards,
UlliI will try setting them both to RTC, right now they are both set to local, here's a copy of my rc.conf, and (kind of hazy on details) had setup to start the hwclock daemon and it would sync them both (did remove this but time is still way off), idk read that on a forum somewhere, unfortunately it would sync but both times would be wrong after this. Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="localtime"
TIMEZONE="America/Denver"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE=
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=Darkstar
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng !network crond dbus wicd)
***UPDATE*** Okay so setting to RTC didn't dp anything, did manage to fix the hardware clock being off somehow the BIOS setting had changed however the System clock now won't sync with the Hardware clock, I do hwclock -s and it syncs fine but as soon as I reboot it's off again. It's exactly six hours off right now so I would imagine it would be some sort of time zone setting but the time zone is set correctly to mountain time
Last edited by kc3 (2012-04-11 16:55:14) -
Export ORACLE_SID not working correctly
I have an 11g database on red hat linux and when I initially log into the machine as the Oracle user and do and export ORACLE_SID when I do a sqlplus / as sysdba it doesnt pick up the the database I specified(in this situation lumtest). If I do an . oraenv though it picks up the correct database. I cant seem to see what is missing as I have provided a dump of the user environment before and after I do the . oraenv.
I thought . oraenv set the base home and path so I'm not sure what else I should look for.
[oracle@adorcl ~]$ env|grep -i oracle
USER=oracle
LD_LIBRARY_PATH=/opt/oracle/product/11.2.0/dbhome_1/lib
ORACLE_SID=lumtest
ORACLE_BASE=/opt/oracle/
MAIL=/var/spool/mail/oracle
PATH=/opt/oracle/product/11.2.0/dbhome_1//bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
HOME=/home/oracle
LOGNAME=oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1/
[oracle@adorcl ~]$ . oraenv
ORACLE_SID = [lumtest] ?
The Oracle base for ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1 is /opt/oracle/
[oracle@adorcl ~]$ env|grep -i oracle
USER=oracle
LD_LIBRARY_PATH=/opt/oracle/product/11.2.0/dbhome_1/lib
ORACLE_SID=lumtest
ORACLE_BASE=/opt/oracle/
MAIL=/var/spool/mail/oracle
PATH=/opt/oracle/product/11.2.0/dbhome_1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
HOME=/home/oracle
LOGNAME=oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1929779 wrote:
I have an 11g database on red hat linux and when I initially log into the machine as the Oracle user and do and export ORACLE_SID when I do a sqlplus / as sysdba it doesnt pick up the the database I specified(in this situation lumtest). If I do an . oraenv though it picks up the correct database. I cant seem to see what is missing as I have provided a dump of the user environment before and after I do the . oraenv.
I thought . oraenv set the base home and path so I'm not sure what else I should look for.
[oracle@adorcl ~]$ env|grep -i oracle
USER=oracle
LD_LIBRARY_PATH=/opt/oracle/product/11.2.0/dbhome_1/lib
ORACLE_SID=lumtest
ORACLE_BASE=/opt/oracle/
MAIL=/var/spool/mail/oracle
PATH=/opt/oracle/product/11.2.0/dbhome_1//bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
HOME=/home/oracle
LOGNAME=oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1/
[oracle@adorcl ~]$ . oraenv
ORACLE_SID = [lumtest] ?
The Oracle base for ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1 is /opt/oracle/
[oracle@adorcl ~]$ env|grep -i oracle
USER=oracle
LD_LIBRARY_PATH=/opt/oracle/product/11.2.0/dbhome_1/lib
ORACLE_SID=lumtest
ORACLE_BASE=/opt/oracle/
MAIL=/var/spool/mail/oracle
PATH=/opt/oracle/product/11.2.0/dbhome_1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
HOME=/home/oracle
LOGNAME=oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1
look at the value of ORACLE_HOME before and after you execute oraenv. ORACLE_HOME should not end with a slash.
ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1/
ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1
Maybe you are looking for
-
Secondary table key??
Hi Experts, Need help...I created a program for pulling customer activity history usign BAPI GETDETAILMULT to retrieve cust info. My problem is that i concatenated the text field together to be inserted into a my custom databse field created. Howeve
-
How to sync two separate iphone's to one computer without wiping and replacing libary?
my brother has an iphone 4 but needs updating, how can i plug his iphone into my computer where i have my own itunes libary without wiping his music, apps etc. with mine?
-
Problem while splitting a string based on ' comma '
Hi, I'm trying to upload a file in .csv format into an internal table. For this i'm declaring an internal table it_iflat and a work area wa_xflat as shown below. DATA: it_iflat type table of string, wa_xflat type string. Now, once i have data
-
WRT54G losing connection periodically
My setup: WRT54G Router Firmware Version v4.30.5, Apr. 27, 2006 Bell Sympatico DSL PC with hardline to Router Laptop with wireless connection A couple times a night, no matter whether the laptop or the PC is being used, I will lose connection to the
-
I want to place a circle with a feathered edge in to Animate. I know how to feather in PSD but when I save as a png for Animate it is made of rough dots? What's the proper proceedure to get feathered elements into Animate?