Bug with Reports
Version: SQL Developer (3.0.02)
I found 2 bugs.
There is a bug in the User Defined Reports. When I add a new report, it ask me to select a db connection. The connection was created, but it did not show in the Connection.
Same the bug are in the Quick Migration Wizard, when it ask to select a connection for the Migration Repository. I have two tested connections, but it did not show in the Connection.
Where is the problem?
Thanks,
A
Hi A,
The migration repository is built in an Oracle database only.
So you need a connection created for the Oracle database to attempt a migration.
That combobox only shows Oracle connections.
The next page of the wizard allows you to select the source database your migrating.
On this page you will be able to select your MySQL connection , or perform an offline capture of MS Access.
Just to note, if you only want to migrate some tables and their data, you could use "Copy To Oracle" instead of "Migrate to Oracle"
"Copy To Oracle" is very simple, requires no repository or setup. More details can be found here
http://dermotoneill.blogspot.com/2010/11/copy-to-oracle.html
Regards,
Dermot.
SQL Developer Team.
Similar Messages
-
30EA3: German language bug with user defined reports still not fixed
In 30EA2: Limited folder functionality with German language
I wrote about a bug in 30EA2. Was this message noticed by the developers?
The bug still exists in 30EA3.
In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.confI made a new thread for the same bug in 3.1EA2:
3.1EA2 Old bug with German language settings still exists
I have some hope, that my problem finally got noticed by the developers. -
Ora-20001 when creating a form on table with report (bug?)
Having some trouble creating a "Form on table with report".
1) I pick my table
2) take most of the defaults on the page where you pick the report type (interactive) and the page number (I changed it to 950). next->
3) Do not use tabs. Next->
4) Select all columns for the report. THEN (here's the problem) set an optional where clause of system_role_name like 'ODPSPOPUP%'. Next->
5) choose standard edit link. next->
6) Specify a page of 951 for the form (leave others defaults). next->
7) Set the form primary key (defined in table). next->
8) use existing trigger. next->
9) choose all columns for the form. next->
10) Leave actions to insert, update, delete. next->
11) Get to the summary page and click Finish
Then I get an error page saying:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create query and update page. ORA-00933: SQL command not properly ended
If I go back to step 4 and erase my where clause the wizard completes successfully.
Also if I change the report type in step 2 from the default of "Interactive" to "Classic" the wizard completes successfully. However upon running the report I get a query parse error. Looks like the where clause in the report sql is: system_role_name like ''ODPSPOPUP%'' (two single quotes on each side).
It looks as if you cannot specify a where clause with a quoted string. The wizard is expecting a bind variable.
Workaround(s):
1) Don't specify a where clause when report type = Interactive in "create form on table with report" wizard.
or
2) Specify a bogus where clause using bind variable syntax such as "system_role_name like :BOGUSVARIABLE". Then edit the report query once the wizard finishes and change the where clause to the constant string you wanted to use in the wizard (e.g. "system_role_name like 'MYSYSTEM%'")
Apex: 3.2.0.00.27
Database: Oracle Database 11g Enterprise Edition 11.1.0.7.0 64bit Production (Oracle EL5)Andy,
It's a bug, all right. Thanks for the detailed problem description. We'll fix it when we can.
Scott -
BUG: Apex 4.0.1 form on table with report. Not passing ID correctly
I'm trying to create a form on a table with report using the wizard. I opted for a classic report page.
The edit link on the report page does not work. The link looks like this:
http://ngdwpc3:7777/pls/apex/f?p=101:15:1800428764039812::::P15_ID:#ID#
This is clearly wrong because one would expect a value to be passed and not a column name.
Looking at the generated report page I get 60 columns. This seems to be a result of the setting:
no-checked :Use Query-Specific Column Names and Validate Query
checked :Use Generic Column Names (parse query at runtime only)
The ID column in the table is mapped to COL01.
Changing the value being passed in the link columns to #COL01# results in the correct behaviour.
My guess is that the option "Use Query-Specific Column Names and Validate Query" is the correct setting for the generated report.
ReneYes, I guess this is a Bug.
1. When you speciify a WHERE clause in the Wozard it adds extra quotes when appending the WHERE into the Report SELECT.
I think thats the root cause, all others just follow as a consequence.
a. Because the query cannot be parse ( two single quotes) the Use Generic Column Names (parse query at runtime only) is automtacillay set
b. This leads to COL01 to COL60
c. Which is turn leads to the link not working.
I could easily recreate the scenario.
To fix it I did the following
1. Removed the extra quotes from the query
2. Selected Use Query-Specific Column Names and Validate Query and Saved
It started working correct.
I suggest you edit your Thred name add BUG at the begining so that it gets spotted by Oracle folks on the forum.
Regards -
Hello - is there a way to have the testand sequence "OverrideSerialNumForParallelModel.Seq" give the reports correctly with the "Test Socket Index" Correctly at 0,1,2,3 instead of each window haveing 0,0,0,0
I've spent a long time trying to get it to work with my applciation -but can't seem to find the answer.
OverrideSerialNumForParallelModel can be found at:
\\Examples\ProcessModels\ParallelModel
Many Thanks
brad
Brad Whaley
LabVIEW Certified Engineer
Attachments:
parallel-bug-testsand-report-index.jpg 156 KBHi Brad,
The reason that all of the report view tabs are displaying the same socket ID is that you are currently generating a single report file for all of your test sockets (the default behavior), and this same report file is being displayed for all of the sockets. You will notice that if you scroll down in any of the reports, results for all of the other sockets will be present. If you would prefer to have a separate report file for each test socket, you can enable the New UUT Report File for Each Test Socket report options as shown below.
Let me know if this does not fix the problem for you!
Al B.
Staff Software Engineer - TestStand
CTA/CLD -
3.1EA2 Old bug with German language settings still exists
In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.conf
I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
Edited by: user1775992 on 22.11.2011 03:30I have raised a bug on this issue and I am actively looking into it.
-
Has anyone seen this BUG with Time Warp and Dissolve?
I'm doing some real basic slow-mo clips, transitioning with various dissolve wipes. I've come across a problem that is extreemly frustrating! I'm wondering if anyone has insight on a fix or if Adobe does service packs or fixes that I might be able to install.
If you put two clips adjacent to each other on a timeline, apply time warp, set percentage to say 30% of realtime, then apply a dissolve between the clips, clip B, the outclip will play in reverse for a period equal to about 1/3 of the duration of the clip.
This is true scrubbing through the timeline and even rendering.
VERY ANNOYING!
I'm going to call support tomorrow, but that's not going to help me get my project finished any sooner since this is a critical element in this composition. I've tried the time remapping method, but the frame-blend is no match for the pixel motion of time warp.Steve,
I think your post #11 was being sarcastic, but you left a little wiggle room for it not to be. With the sarcastic interpretation, I must add my thoughts:
Here is the link to the Adobe bug report form
. It is important that users who discover bugs with reproducible steps file them - otherwise they don't stand a chance of ever getting fixed. Steven Gotz's advice was sound in this regard.
As to the discussion of workarounds - since this is a User-to-User forum, the best that we as a community can do is help each other out with workarounds, since none of us here have the power to actually fix anything.
The important thing to glean from SG's post is the definite need to file a bug report. -
HI,
I have Reports (dev 6.0.5). Whenever I use Built in package LIST in my application it compiles but during execution I get an error that package not found...please help URGENT
TIA
AnandI can't reproduce this with Reports 6i (6.0.8). Are you sure that it's the LIST package that's causing the compilation issues (often this issue can be caused by running against a different database that was compiled against, and data structure changes making automatic compilation impossible).
If you've checked this out, and still feel that you have a bug then I would suggest that you log an iTAR with Oracle Support.
Regards,
Danny -
I have a report made it with Report Builder and in the screen preview all the information is complete and fine; however when I print it, some letters disappear on the left side of the fiel. I don't know How to correct this. I tried with the properties that allows to fields
expand them in an horizontal and vertical way. But it doesn't work. How can I get a WYSWYG ("What you see What you get") in a print form?... Could be possible
that it is a Report Builder bug and How I can correct this? or maybe I'm creating the reports in a wrong way... I need help...
Thank you very muchGodis-Tei wrote:
Hi Forum,
Thanks for the various contributions that are helping my experience with oracle.These are my two current problems:
1. Assuming I have built a page of payroll for 40 workers that repeats monthly. Is there a way of copying the previous page for last month into this month? Or, do I have to build a new page on the same table and update it?
2. Please, what procedure should I follow to print a form or a report from the application page?Please ask only ONE question per thread. These issues do not appear to be related in any way, so so the thread is likely to end up an unmanageable, confusing mess.
Close this thread and open 2 new ones, one for each question. -
Cfreport cutting off lines on multiple pages created with report builder
I have a report built with report builder and it appears that if you set the body to "stretch with overflow" that cfreport will "cut off" a line or two every time it paginates see attached for a simplified version of the report, I have removed all but the body on this (actual report has a watermark, report header, page header and page footer ...the problem is pretty apparnt with this scaled down version as you can see it's missing text from one page to the next ..any ideas/suggestions/known bug?? You can see a sample of the issue here: http://www.arroyoc.com/onlybody.pdf
Hi Helen,
As per my understanding, I think this issue is caused by width size is not appropriate in the report. To narrow down this issue, please make sure that Body Width + Left margin + Right margin <= (Page width).
If the tablix is a matrix, because of the column group can expand to multiple columns, we should according to the following rule:
Body Width + Extra expanded column width + Left margin + Right margin <= (Page width).
Besides, please make sure there are no extra page breaks before each “R”. To check whether the issue is caused by the letter “R”, we can try to use another field to replace the Company Name field.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
RDS with Report Builder does not work automatically. I must
first wake RDS up by doing something like accessing the query in
the Report Builder directly. I'm using CF 7.02, Builder Build
144677 with the latest version of SQL Server 2005 and the SQL
database driver. Ideas to fix or is this a Builder bug?shugoro wrote:
http://127.0.0.1/CFIDE/administrator/index.cfm
Good, you're using the default port 80.
Try the following configuration:
Host name: localhost
Port: 80
Do not use SSL
Context Root: (leave blank)
User Name: admin
Password: (leave blank)
Do not prompt for password.
Click the "Test Connection" button. What happens? -
E71 Firmware Bug with USB Mass Storage.
Hi,
Just got a e71, it has the latest firmware, it's mostly good except for this bug.
If you install a new theme on a memory card and then attempt to use the USB for mass storage it will always lock the card no matter how you disconnect from the USB, it always reports Memory card in use.
What is supposed to happen is the phone is supposed to switch to a theme on the phone memory and unload the theme on the card, it does indeed switch themes, but does not unload the theme on the card, so the only way to free the card is to reboot the phone.
If anyone from Nokia is looking at this forum, you guys need to fix these little bugs with the firmware. A update to the OS the E71x is using would be nice by the way. I paid a lot of money for this unlocked phone and expect it to be rock solid.I had this problem with the memory card. All you do is set the USB connection to PC suit and not Mass Storage. If it's in PC suit mode you don't loose the memory card and it always let you access it. I never bother with mass storage anymore. Also set to don't ask if you want. I ahve no issues since I di this and am using the 200 firmware.
To transfer files to the card I go into my computer, double click the picture of the nokia E71 and then double click the memory card and access it that way. Hope this helps as it's a pain installing everything on the phone.
Just another quick tip if you download the themes through your phone like me once installed and after a re-start something may try and install and fail once your phone starts up. It will do this everytime you re-start your phone. To fix the issue you have to browse the memory card with 'view hidden folders' selected in Windows and delete certain sis files from a certain folder. I can't remember off the top of my head but it explains it in another post in this forum. I can't take the credit for it.
Ben -
Bug toolkit report - LMS 3.1
Hi
I have problems with Bug toolkit report - bug summary report.
I have empty all columns in this report. No bugs. Despite of having over 500 devices with various IOSes.
Is it depends on CCO account or something else?
Best regards
MarekThe Bug Toolkit report in RME can be problematic when it comes to certain device types. That is why there is now a link to the Cisco.com Bug Toolkit report in the RME report interface. You may have to forgo using the RME report, and use the Cisco.com tool directly to find bugs.
-
Need to create form on a table with report with a table has NO primary key
Hi, I tried to created some insert/update/delete form+report in an application, it works fine only if the table has primary key. Does anyone know how to create the same functionality with a table with no primary key? I saw an application is built on older version of htmldb that is using tables with no primary keys at all.
Here are the specific issues that I am facing:
- I am building some Form on a table with Report, it requires the table with primary key for form to update. Is there a workaround that I can use tables that has no primary keys at all?
- Say if primary key is necessary in the previous report+form, but the maximum number of columns that I can use to composed a primary is only 2 for that Form-Report, I cannot find anything handling > 2 primary key. Do you know if there are some ways to composite a primary key from many columns together?
Your help is really appreciated.
Thanks,
AngelaSorry to ask response so late. I had no time to get back to that issue before.
Regarding the triggers, I can make it work for the update, but not the insert.
Here is my trigger:
create or replace trigger STATUS_T1
instead of insert on STATUS
begin
insert into STATUS ("LABEL", "AREA", "OWNER", "TEST_NAME", "STATUS", "REMARKS", "BUGS", "DEV_MGR", "TEST_BY_DATE")
values(:new.LABEL, :new.AREA, :new.OWNER, :new.TEST_NAME, :new.STATUS, :new.REMARKS, :new.BUGS, :new.DEV_MGR, :new.TEST_BY_DATE);
end;
by any chance, you can notify what is wrong?
I already skip the ROWID when inserting to the view STATUS, but I cannot figure out what is wrong when inserting a new record to that view.
It gave me the following errors:
ORA-06550: line 1, column 38: PL/SQL: ORA-00904: "ID": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table STATUS
Then, I turned to debug mode, I am thinking that maybe because I use a HIDDEN item to hold the value of ROW_ID as I use the rowid (called ID in the view) to retrieve the record as a column link from previous page. What do you think?
Thanks again,
Angela -
Bug with min function applied to an attribute?
Does anyone know if there is a bug with the minimum function when it is applied to an attribute?
I have Accounts, Date, Sales Type and volume in my request.
I have applied min(Date) in the fx of the Date column.
My query is hitting the YAGO table even though non of the columns i am using is mapped onto a YAGO table.
As a test I've removed the min function frem the Date column and applied it to the Account column.
Again my query hits the YAGO table.
Does anyone know if it is a bug or can someone propose a workaround?
I am using OBIEE version 10.1.3.4.1090414.1922 on Windows XP.Hi,
You can create a separate report and refer it into the column of main report by 'Filter based on results of another request'
This should resolve
Hope this helps
Regards
MuRam
Maybe you are looking for
-
Echo a variable in a form based on user selection
Ok I am very very new to java to the point were I only know how to use pre-made javascripts in my php code so be gentle. :) First, here is part of a form I have: <select name = "pulmonologist" > <option selected="" value="">---Select--- <option value
-
For past several days, my Windows e-mail browser frequently freezes and must be closed. This occurs whenever message near top of browser states that Adobe website wants to install Adobe Flashplayer. Windows explanation states that termination is a re
-
Reg: Time lapses in webdynpro
Hi, How can i see the time lapsed for webdynpro app in the portal when i execute it? Thanks in advance.
-
Bug : ibook on IOS7 and ipad 2 very very slow with pdf
today i try ibook and iOS7 and large pdf file (500 pages with a few photos) ibook take 10 or 15 seconds and more to load a page it's usefull. it wasn't on IOS6 it seems to have a big bug with pdf preview? another apps " larousse patisserie" have the
-
What is the best method of using an iPad as an extra screen for a macbook pro?
I just received a macbook pro what is the best method for using an ipad as an extra screen for an ipad? Hopeflly, one that is no cost to me.