Bugcheck dump for 11.0.3128.0

Hi,
I have a bugcheck dump file. I don't know how to use it for troubleshooting. Can someone please guide me?
Its SQL server 2012 3128 build. I was troubleshooting a performance issue when SQL server rebooted itself. Later I found this dump file. I do have more error log files etc. Please advise where should I begin from.
Thanks,
Current time is 14:48:07 01/07/14.
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 11.0.3128.0
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is AMD Opteron(TM) Processor 6276 .
Bios Version is INTEL - 6040000
VMW71.00V.0.B64.1206220901
2 X64 level 8664, 14 Mhz processor (s).
Windows NT 6.2 Build 9200 CSD .
Memory
MemoryLoad = 84%
Total Physical = 8191 MB
Available Physical = 1299 MB
Total Page File = 12479 MB
Available Page File = 3989 MB
Total Virtual = 8388607 MB
Available Virtual = 8372937 MB
***Unable to get thread context for spid 0
* BEGIN STACK DUMP:
* 01/07/14 14:48:08 spid 3916
* Non-yielding Scheduler

Hello Mudit,
Follow the steps in
http://mssqlwiki.com/2012/08/21/non-yielding-iocp-listener-non-yielding-scheduler-and-non-yielding-resource-monitor-known-issues-and-fixes/ and check if the stack matches any of the existing issues.If you don't find the matching stack post the stack here,
we will let you know the cause. Remember most of the Non-yield dumps are because of external conditions and SQL Server becomes victim.
If you want to understand what is Non-yielding condition please
http://mssqlwiki.com/2012/08/17/how-to-analyze-non-yielding-scheduler-dumps/
Thank you,
Karthick P.K |My blogs|My Scribbles|Twitter|My Facebook
Group|
www.Mssqlwiki.com
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Similar Messages

Dump for custom planning books in SDP94

Hi,
        We are having a fresh SCM APO 5.0 installation. We used to get a dump whenbever the SDP 94 transaction was executed. We found a SAP note 889989 and applied. Now the problem is it is dumping for any other planning book except the standard SAP delivered ones when the SDP94 transaction is executed. I found a note 498861 but does it help?
Here is the dump:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          10/10/2007 16:39:31
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Control Framework : Error processing control
     Long text of error message:
      Diagnosis
          An error occurred when the system tried to process the commands
          from the Automation Queue on the presentation server.
          There are several possible reasons for this:
          - The installation of the SAP GUI on the presentation server is
          faulty or obsolete.
          - There is an error in the application program
          - There is an error in the SAPGUI or an integrated control
      Procedure
          1. Make sure that you have imported the appropriate Support
          Package, the current kernel, and GUI patch for the release of your
          system
          2. Check whether the error occurs locally on one or a few PCs, or
          generally on all PCs. Note whether the error only occurs for some
          users, for example because of a specific Customizing setting.
          If it only occurs locally, this suggests an installation problem
          with the PC. Check the installation; if necessary, reinstall thesoftware. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
   "Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Trigger Location of Runtime Error
    Program                                 SAPLOLEA
    Include                                 LOLEAU02
    Row                                     29
    Module type                             (FUNCTION)
    Module Name                             AC_SYSTEM_FLUSH
         Can any one suggest me a solution please?
Thanks.

hi Raj,
this normally happens for all the new installations when opening the planning books with tcode /SAPAPO/SDP94. every new installation gives different dump with the above tcode. the best option is to contact the SAP team.
regards,

Call for adobe form is going for dump for multiple users

hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....

That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham

How can I get heap dump for 1.4.2_11 when OutOfMemory Occured

Hi guys,
How can I get heap dump for 1.4.2_11 when OutOfMemory Occured, since it has no options like: -XX:+HeapDumpOnOutOfMemoryError and -XX:+HeapDumpOnCtrlBreak
We are running Webloic 8.1 SP3 applications using this Sun 1.4.2_11 JVM and it's throwing out OutOfMemory, but we can not find a heap dump. The application is running as a service in Windows Server 2003. How can I do some more analysis on this issue.
Thanks.

The HeapDumpOnOutOfMemoryError option was added to 1.4.2 in update 12. Further work to support all collectors was done in update 15.

Short Dump for Dynamic Select Query

Hello all,
I get a short dump for my dynamic select query at the end of the code. The error is "The types of operands "dbtab" and "itab" cannot be converted into one another."
My code looks like below.
FORM get_ccnum_2 USING p_tabname TYPE dd03l-tabname.
DATA: p_table(30) TYPE c.
FIELD-SYMBOLS: <dyn_wa>,
 <t> TYPE table.
DATA: it_fldcat TYPE lvc_t_fcat.
TYPE-POOLS : abap.
DATA: it_details TYPE abap_compdescr_tab,
 wa_details TYPE abap_compdescr.
DATA: ref_descr TYPE REF TO cl_abap_structdescr.
DATA: new_table TYPE REF TO data,
 new_line TYPE REF TO data,
 wa_it_fldcat TYPE lvc_s_fcat.
p_table = p_tabname.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
LOOP AT it_details INTO wa_details.
 CLEAR wa_it_fldcat.
 wa_it_fldcat-fieldname = wa_details-name .
 wa_it_fldcat-datatype = wa_details-type_kind.
 wa_it_fldcat-intlen = wa_details-length.
 wa_it_fldcat-decimals = wa_details-decimals.
 APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fldcat
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <t>.
CREATE DATA new_line LIKE LINE OF <t>.
ASSIGN new_line->* TO <dyn_wa>.
wa_cond = 'CCNUM <> '' '' '.
APPEND wa_cond TO tab_cond.
 SELECT * INTO TABLE <t>
 FROM (p_table)
 WHERE (tab_cond)
 ORDER BY (tab_ord).
ENDFORM. " GET_CCNUM_2

Hi,
I tried to execute the code using table BSEGC and it gave a short dump..
the actual exception that shows in ST22 IS ..UNICODE_TYPES_NOT_CONVERTIBLE..
I think there is something wrong in the internal table creation..
Instead of using the method cl_alv_table_create=>create_dynamic_table to create the dynamic table I used the following and it worked..
CREATE DATA new_table TYPE TABLE OF (p_table).
* Comment begin " Naren
* ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
* it_details[] = ref_descr->components[].
* LOOP AT it_details INTO wa_details.
* CLEAR wa_it_fldcat.
* wa_it_fldcat-fieldname = wa_details-name .
* wa_it_fldcat-datatype = wa_details-type_kind.
* wa_it_fldcat-intlen = wa_details-length.
* wa_it_fldcat-decimals = wa_details-decimals.
* APPEND wa_it_fldcat TO it_fldcat .
* ENDLOOP.
* CALL METHOD cl_alv_table_create=>create_dynamic_table
* EXPORTING
* it_fieldcatalog = it_fldcat
* IMPORTING
* ep_table = new_table.
* Comment End. " Naren
CREATE DATA new_table TYPE TABLE OF (p_table). " New code by naren
Please Try this..
Thanks
Naren

Throws Core Dump for OCISessionBegin() on Linux for Oracle Client v10.2.0.2

hi,
The OCI method, OCISessionBegin() is throwing an core dump on 10g client in Linux on C++, but the same code works fine for 8i and 9i client. Core dumps for 10g Client. 10g tnsnames.ora file is same as of 9i. I just debeggued with the core and says failing in OCISessionBegin() method. I would like to know is there any problem with Oracle Client v10.2.0.2? or how does i can solve the issue? appriciate a quick help in this regard.
Thanks,
Sreeni

Have you looked in the Knowledge Base information at metalink? That would be the place to start.
If that does not work then the next step would be to remove this thread and post in the OCI - OCCI forum where there are people that can actually help you.

Getting Dump for depreciation run

Hello
While taking the depreciation run thr tcode AFAB one background job is created for posting the depreciation value.
But this background job is terminated giving short dump for INSERT BSEG statement.
runtime error DBIF_RSQL_INVALID_REQUEST is raised.
But the same transaction works fine on quality server with same parameters.
What might be the reason?? How to trace the reason??

i think insertions in table bseg is not allowed on server u r working on..
plz reward points if this helps

BugCheck Dump

please review if this stack dump is a concern or if it's a one time non-critical event.
If it's a concern, please provide any recommendations.
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 10.50.2550.0
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is Intel(R) Xeon(R) CPU E5630 @ 2.53GHz.
Bios Version is DELL - 1
Phoenix ROM BIOS PLUS Version 1.10 1.3.9
16 X64 level 8664, 2 Mhz processor (s).
Windows NT 6.1 Build 7601 CSD Service Pack 1.
Memory
MemoryLoad = 96%
Total Physical = 16374 MB
Available Physical = 560 MB
Total Page File = 32746 MB
Available Page File = 15132 MB
Total Virtual = 8388607 MB
Available Virtual = 8371381 MB
**Dump thread - spid = 0, EC = 0x0000000000000000
***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\LOG\SQLDump0005.tx
t
* BEGIN STACK DUMP:
* 07/11/14 01:38:00 spid 2060
* Non-yielding Resource Monitor
* Short Stack Dump
Thank you!

please review if this stack dump is a concern or if it's a one time non-critical event.
If it's a concern, please provide any recommendations.
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 10.50.2550.0
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is Intel(R) Xeon(R) CPU E5630 @ 2.53GHz.
Bios Version is DELL - 1
Phoenix ROM BIOS PLUS Version 1.10 1.3.9
16 X64 level 8664, 2 Mhz processor (s).
Windows NT 6.1 Build 7601 CSD Service Pack 1.
Memory
MemoryLoad = 96%
Total Physical = 16374 MB
Available Physical = 560 MB
Total Page File = 32746 MB
Available Page File = 15132 MB
Total Virtual = 8388607 MB
Available Virtual = 8371381 MB
**Dump thread - spid = 0, EC = 0x0000000000000000
***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\LOG\SQLDump0005.tx
t
* BEGIN STACK DUMP:
* 07/11/14 01:38:00 spid 2060
* Non-yielding Resource Monitor
* Short Stack Dump
Thank you!

Hi every one can any one help i have a problem in importing java dump for

hi every one can any one help i have a problem in importing java dump for solman 4.0 mssql 2005 sr3

Hi wahed,
Please elobrate question not clear.
Regards,
Shahed iqbal

I need a good data dump for practise

Can anyone refer me to where I can get really nice data dump for sql and plsql practise.
Thanks
Michael

Michael,
Read this article Oracle's Sample Schemas: Saying Goodbye to Scott. You should find sample data in ORACLE_HOME\demo and ORACLE_HOME\rdbms\admin directories. 
With kind regards,
Jornica

How to take DB dump for "virtual Columns" enabled env in oracle11g

Hi,
Could you please let me know the procedure/steps to take the DB dump for "virtual Columns" enabled environment in oracle11g.
Not able to take the database dump using 'exp' tool.
Thanks,
Satya Aditham

Wrong forum, this is a Secure Backup specific forum, not an RDBMS/RMAN forum.

BW: Not getting Dump For Program error in Process Chain

I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.

Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM

How can i download the latest dumps for oracle 10g

how can i download the latest dumps for oracle 10g

It's NOT permissible to use Oracle dumps for passing certification exams!
Please, refer to below links for more information about "using dumps"
http://www.certguard.com/braindumps.asp
http://ivan.kartik.sk/index.php?show_article=39
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to get Question Dump for OCP Exam

Hi All,
Please help to find out Ouestions Dump for OCP Exam.
Regards
Saugata

can you help me in finding similar kind of stuff for this exam
11i E-Business Suite Essentials for Implementers (1Z0-200)
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_200

DATA_OFFSET_TOO_LARGE dump for field symbol assignment/offset

Hi,
I am getting a DATA_OFFSET_TOO_LARGE dump for field symbol assignment/offset.
Dump says, 'In the running program "ZTEST", the field "<WA_FINAL>" of the type "u" and length 2174 was to be accessed with the offset 2204. However, subfield accesses with an offset specification that is not smaller than the field length are not permitted.'
Here <WA_FINAL> have to be 'TYPE any' to avoid assignment conflicts later in the logic.
It's basically dumping at <WA_FINAL>+V_LEN(V_OFF) = WA_DATA-FIELD1.
Here V_LEN LIKE DD03L-LENG & V_OFF LIKE DD03L-LENG.
Please suggest how to get rid of this dump.
Regards,
Ritesh.

The dump is very clear, your field is smaller than the offset.
The problem is most likely how you are calculating v_len and v_off.
You could change that, but there is probably an easier and faster way to do what you are trying there. Is <wa_final> something like a line from a file or what?

Bugcheck dump for 11.0.3128.0

Similar Messages

Maybe you are looking for