Bugs with Custom Status not getting displayed on Product Backlog and Sprint Backlog

We added a couple of new states to the Work Item Type of Bug. We want all the bugs to show up in the Sprint Backlog items.
In order to do this we added the custom states in Common Process Configuration file using witadmin and also in the Workflow tab of "Bug" using TFS Power Tools.
The excerpts from the Common Configuration file for this is:
<BugWorkItems singularName="Bug" pluralName="Bugs" category="Microsoft.BugCategory">
<States>
<State value="New" type="Proposed"/>
<State value="Open" type="Proposed"/>
<State value="Deferred" type="Proposed"/>
<State value="Approved" type="Proposed"/>
<State value="Committed" type="InProgress"/>
<State value="Ready
For QA" type="InProgress"/>
<State value="Devlopment
in Progress" type="InProgress"/>
<State value="Done" type="Complete"/>
<State value="Closed" type="Complete"/>
<State value="Reopen" type="Complete"/>
<State value="Fixed" type="Complete"/>
</States>
</BugWorkItems>
I assumed that this should have been sufficient to display all the Bug Work Items with these custom states.
So, I created a new bug that had the state of "New" in the system. It was visible in the Product Backlog.
When I changed the same work item's state from New to
Open and save, the bug is removed from the backlog with this message.
[Title] was removed because of your recent changes.
The following changes removed the item:
State was set to: Open
Even after refreshing the page, the same work item does not appear in the product backlog page or the Sprint Backlog page.
Any idea why this could happen?
TSF Version : TFS 2013
The Error I am getting on the Settings Page is :
Page -> Control Panel > CollectionName > FabrikamFiber > FabrikamFiber Team
Overview Tab > Settings Page
Under BUGS sections:
TF400917: The Current Configuration is not valid for this feature. This Feature cannot be used until you correct the configuration.

Hi Augustya,
I'd like to know the version of TFS you're using, and how did you customize the Common Process Configuration file for display the bugs on backlog page.
You can add bugs or other work item types to appear in either the task board or the product backlog, but not both. I have a try and it wroks for me, you can follow the links below to add bugs to the backlog pages and check if it works.
https://msdn.microsoft.com/en-us/library/jj920163.aspx?f=255&MSPPError=-2147217396
http://blogs.msdn.com/b/visualstudioalm/archive/2013/02/12/add-bugs-to-the-task-board-or-backlog-pages.aspx
Best regards,

Similar Messages

A keyfigure is not getting displayed in the DSO and query

hi friends,
i have newly developed a DSO with 11 keyfigures and with some 10 characteristics. i created DTP , transformations etc., and i loaded data into it and activated it succesfully.
now when i select display data of this DSO one of my keygure is not getting displayed.
even tht same keyfigure is not appearing in the query too.
but when i check the active table of this dso in SE11 , tht keyfigure is displayed with values.
could anyone help through this issue.

Hi
Even I faced such an issue earlier. I could resolve it simply by readjusting the DSO i.e. to delete the keyfigure and add it in the structure once again, before this you have to delete the data in the DSO. Also, if you have a multiprovider on the DSO make sure that the keyfigure concerned is identified.
Let us know if this works for you. Thanks.

Custom field not getting displayed in SUS PO item level

HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
Kishan

Hi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan

Hier Node with character (e.g. 11100A) is not getting displayed in report

Hi All,
I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
Plz help me.
Regards,
Sandeep

Sandeep,
Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
-1100
-11100A etc
Or is it a range i.e.
Node 1
1000 : 11100A
Regards
Gill

Profit center text not getting displayed in report

Hi all
Iam using 0profit_ctr in my query.But in report the text associated with it is not getting displayed.When i see the masterdata the text is displayed properly.
Please let me know how to rectify this.
Thanks
Bhanu

Right click on the master object, and click "Activate Master Data"
Hope this will resolve the issue.
Ishdeep.

SAP Script not getting transported to Production server

Hi Friends,
The office address in the Purchase Order has been changed using T-code SE71. The changes are getting transported to QA Server, but not getting transported to Production Server.
Kindly let me know why this change is not getting transported to Production server and also guide me to correct the same.
TIA.
Regards,
Mark K

solved.

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
 <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
 <Actions>
 <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
 <Properties>
 <Property name="WebDynproApplication" value="ApproveFormApp"/>
 <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
 <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
 <Property name="openInNewWindow" value="yes"/>
 <Property name="display_order_priority" value="5"/>
 </Properties>
 <Descriptions default=""/>
 </Action>
 </Actions>
 </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION ApproveFormApp
PACKAGE sap.com/pa~asr~formstep

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

SAP Fields not getting displayed on the BDT screen

Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
Shiva

Hi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge

Barcodes are not getting Displayed in Smartforms.

HI
In Previous Month barcode was getting displayed in smartforms print Preview. And PDF form is generated successfully. I am not using standard form this is custom.
In Previous month, Service pack SAPKA70023 ABA Support Package 23 & 22 for 7.00 were applied, After that Barcode is not getting displayed for current month. I identified that Barcode Name is not mentioned in smartstyles.
Ther is no transport Request Moved from last one year.
Can any one suggest me there will be any impact on barcodes after service packs
Thanks
Ravi

Hello,
have created some new users and done with the leave request, it comes to backend inbox, but not
visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
You can see what data source your portal is using by going to
Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
Here you can check if your user is contained in the data source:
Portal --> User Administration --> choose the right data source --> put in the username --> search
Please check if your users are correctly created.
Regards,
Iris

SC history update problem:PO from PR not getting displayed in SC history

Hi
We are on EBP 3.5,Classic scenario.
PR's get created in R/3 backend and then are manually converted into PO.This entire cycle is shown in EBP SC history tab.However for some of the SC's we are seeing status only up to PR stage(PO no. is not getting displayed either in BBP_PD or check status txn).When we try manual status updation thru BBP_GET_STATUS_2,it throws an error saying,"these references neither GUID nor destination,thus could not be assigned to any system not even local system".
Has anyone faced such an issue.Pl reply
Regards
Sanjeev

Hi
I am not sure, is it happening for Catalog Item, free text item, or limit item in your case.
Have you tried executing report CLEAN_REQREQ_UP ? What all errors appear in RZ20 Transaction, when this dump happens. ? 
Please have a look at the following OSS Notes, which deals with the same symptoms, you told in your response.
Note 1005373 - BBPSC04: Purchase order details missing in history for STO
Note 728894 - Creation date of the PReq in the history
Note 989891 - BBP_GET_STATUS_2: Incorr quantity determination in back end
Note 1023706 - Follow-on Documents Show Wrong Net-Price and Net-Value.
Note 886099 - History: Short dump during the product conversion
Note 925480 - Short dump in history of a purchase order
Note 1006898 - Deleted vendor not displayed in Change hist of Shopping cart
Note 994379 - History page:wrong exchange rate is used
Note 725920 - Incorrect display in follow-on docs of limit shopping carts
Note 953238 - Shopping cart history in the sourcing cockpit
Note 949162 - Follow-on documents exist, status I1111 and I1113 active
Note 890859 - Status/shopping cart/error message without text
Note 927585 - GI slip and cancellation are missing in the history
Note 730239 - Check status: Missing Backend reference
Note 625121 - PO Ack not displayed in Check Status
Note 758522 - Check Status: Follow-on documents in the list and history
Note 532709 - Shop with Limit: Backend PO after requisition is not found
Note 515475 - EBP/BBP Status BE Requis.: Probl. with Limit / UoM
Note 555183 - EBP 3.0: Not all references found after 550783
Note 957957 - BBPIV03:doesn't find POs when deliv.date is set
Note 787786 - Archived PReq and reservations are missing in history
Note 812564 - The ordered quantity of the BE-PO is not read
Note 943679 - Termination or incorrect conversion after Note 812564
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

Custom Tab not getting high-lighted

Custom Tab not getting high-lighted
Hi,
I have added a new tab TabX in Item Master data form.
When only my add-on is running, it is working properly:
When I click on the TabX, all the controls belonging to the tab are displaying correctly.
TabX control is getting highlighted.
When my add-on runs with another add-on (DBS):
When I click on the TabX, all the controls belonging to the tab are displaying correctly.
But, TabX is not getting highlighted. Instead, some other tab(purchasing tab) is getting highlighted.
1) I'm not sure what is done by the other add-on.
2) I cannot debug my add-on when the other add-on is running. (Because we cannot get the other add-on installed in our office network. It is running only in client site.)
So, I need to 'guess' what might solve this problem.
Please help me if you know any work-arounds, so that I can highlight TabX (The normal effect of pressing a tab) in this situation.
Thank you.
Regards,
Geetha

Hi Geeta,
on FormLoad event,add the panelevel and set the panelevel of the Items.(must ber unique on that form)
OnLoadAfter(ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            BubbleEvent = true;
            AddNew_IndirectCost_Tab()
private void AddNew_IndirectCost_Tab()
                 oForm.DataSources.UserDataSources.Add("Folder", SAPbouiCOM.BoDataType.dt_LONG_TEXT, 100);
                oItem = (SAPbouiCOM.Item)oForm.Items.Item("36");
                oNewItem = oForm.Items.Add("oFldrCost", SAPbouiCOM.BoFormItemTypes.it_FOLDER);
                // oNewItem.AffectsFormMode = true;
                oNewItem.Top = oItem.Top;
                oNewItem.Height = oItem.Height;
                oNewItem.Width = oItem.Width;
                oNewItem.Left = oItem.Left + oItem.Width + 50;
                oFolder = (SAPbouiCOM.Folder)oNewItem.Specific;
                oFolder.DataBind.SetBound(true, "", "Folder");
                oNewItem.AffectsFormMode = false;
                oFolder.Caption = "Indirect Cost";
                oFolder.GroupWith("36");
                oItem = (SAPbouiCOM.Item)oForm.Items.Item("60");
                oNewItem = oForm.Items.Add("LblMacCost", SAPbouiCOM.BoFormItemTypes.it_STATIC);
                oNewItem.Top = oItem.Top;
                oNewItem.Height = oItem.Height;
                oNewItem.Width = oItem.Width + 20;
                oNewItem.Left = oItem.Left;
                *oNewItem.FromPane = 222;*      // set pane level
                *oNewItem.ToPane = 222;*          //set panelevel
                oStaticText = (SAPbouiCOM.StaticText)oNewItem.Specific;
                oStaticText.Caption = "Actual Machine Cost";
on click of the your pane set the panelevel, like;
protected override void etClickBeforeAction(ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            BubbleEvent = true;
             if (pVal.ItemUID == "oFldrCost")                    // oFldrCost-My pane,
                 oForm.PaneLevel = 222;
The main thing is that you have to set the form's panelevel on click_before event and youe pane will be high lighted

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
 IT_eventS TYPE slis_t_event,
 fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
 rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
 belnr TYPE dberchz-belnr,
 belzart TYPE dberchz-belzart,
 net TYPE dberchz-nettobtr,
 END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
 i_callback_program = 'YZ_PLR'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* IT_EXCLUDING =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
 is_layout = layout
 it_fieldcat = fcat[]
 i_tabname = 'LT_TAB'
 it_events = IT_EVENTS[]
* IT_SORT =
* I_TEXT = ' '
tables
 t_outtab = lt_tab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* MAXIMUM_OF_APPENDS_REACHED = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
 BELNR LIKE BSEG-BELNR,
 GJAHR LIKE BSEG-GJAHR,
 WRBTR LIKE BSEG-WRBTR,
 WAERS LIKE BKPF-WAERS,
 END OF LT_TAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
 IT_EVENTS TYPE SLIS_T_EVENT,
 FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
 REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-CFIELDNAME = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME = 'BSEG'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'WAERS'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME = 'BKPF'.
FCAT-DO_SUM = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
 WHERE BUKRS = 'MAAB'
 AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
 EXPORTING
 I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
 EXPORTING
 IS_LAYOUT = LAYOUT
 IT_FIELDCAT = FCAT[]
 I_TABNAME = 'LT_TAB'
 IT_EVENTS = IT_EVENTS[]
 TABLES
 T_OUTTAB = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Bugs with Custom Status not getting displayed on Product Backlog and Sprint Backlog

Similar Messages

Maybe you are looking for