Building a Composite Business Process from Scratch-Guided 1 (Cannot Build)

Hi, I have tried to followed the document : Building a Composite Business Process from Scratch with SAP NetWeaver BPM u2013 Guide 1 to create my first BPM program, however, the program cannnot be built. I don't knoww how to fix the program, can you help?
Error: Constraint violation: Active pool "Investment Approval Process" must have exactly one End or Termination but any End Error Event.
Error: Constraint violation: Active pool "Investment Approval Process" must have exactly one Start Event.
Warning: Constraint violation: No administrator defined for "Investment Approval Process".
Warning: Constraint violation: Some of the data elements from input mapping of "Enter Purchase Request"is not initialized before used.
Warning: Constraint violation: Some of the data elements from input mapping of "Approve Purchase Request"is not initialized before used.
Error: Exception during constraint check of processes. Check Your model for problems.
Error: Constraint validation found errors
Ant build finished with ERRORS
Constraint validation found errors
Error: Build stopped due to an error: Constraint validation found errors
Regards,
Matt Yim

Hi Matt,
Check the following in your process:
- If you have gateways in your process, ensure that all the paths have conditions and atleast 1 default path for gateway is set
- Check for Process Administrator assignment and TaskLevel/Lane level potential owners are assigned
- Check for the i/o mapping of tasks
- Check the Problem View for th errors.
Cheers,
Arafat

Similar Messages

MM,PM Business process from scarch

Hi Gurus,
Can any body ley me know the MM,PM business process from scratch.
what are the things should be done by MM consultant from scratch,
Thanks,
Dariya

Hi Dariya,
MM PRocess
Create Purchase Requisition
Maintain Quatation
Selecting the Vendor
Create the Purchase Order
Create Goods Receipt
Posting the Invoice
PM Process
Creat Master data Equipment
Creat Technical Object like Functional location
Create Maintenace plan
Create Maintenace Order
Processing the maintenace order
Calibration of testing Equipmemt
PM Notifications processing
Thanks and regards
Muruegsan

How to invoke business process from sap xi?

Hi...
Please tell "How to invoke business process from SAP UI's."

Hi...
How to invoke business process from SAP UI's. (Eg: To trigger a process after creating an invoice)

Invoking a WLI 9.2 business process from JSF Controller class

I want to call a WLI business process from a java class, which will run in the same JVM as the WLI. I have read that JPD Proxy can be used for this purpose. I am concerned with the overhead of RMI calls. Any insight into this would be helpful .

Hi Raj
You have to use JPDproxy to call a business process from a java class. This is what BEA also recommends at http://e-docs.bea.com/workshop/docs81/doc/en/integration/howdoI/howProxyJavaClient.html as this is the only way to call a JPD from plain java class.
Many customers use this and even if there is, the overhead should not be substantial.
You may also want to try posting in the WLI newsgroup at http://forums.bea.com/bea/forum.jspa?forumID=2047
Vimala-

QM- Building Block Library -Business Process Procedures

Dear All,
Like in MM Procurement we have many document explaining Business Process Procedures(Eg:J49 - Procurement of Stock Materials). But in QM Building block I could not find Business Process Procedures document.
Can some body share me if have any such kind of documents or can give me link from where can download the same.
My gmail ID is "dhanu.e"
Thanks,
Dhanu

hi
check in the old building blocks you will get it.

Timeout error calling a Business Process from another Business Process

Hi to all,
How can I call a Business Process (BP2) from another Business Process (BP1) and wait for the response before other things are performed? I'm trying to call from BP1 in a synchronous step the process BP2; the first step of BP2 is an Open S/A Bridge and, after a transformation, a Close S/A Bridge, but no response returns to BP1 till a timeout error.
Thank you very much,
Antonio

I did some changes and the error now I am getting is,
===========================================================
Error : null oracle.jsp.JspServlet.internalService(JspServlet.java:186)oracle.jsp.JspServlet.service(JspServlet.java:156)javax.servlet.http.HttpServlet.service(HttpServlet.java:588)org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)org.apache.jserv.JServConnection.run(JServConnection.java:294)java.lang.Thread.run(Thread.java:534)
Error : oa_html._Text__Button__Lat._jspService(_Text__Button__Lat.java:712)oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)oracle.jsp.JspServlet.internalService(JspServlet.java:186)
============================================================
Does the middle tier need to be bounced?
Thanks

Separating heavy duty business process from web application

I'm working with a web application that just runs in a Servlet container, Jetty actually. I'm wondering what the best way to separate resource intensive processes, such as a search indexing process, from the main web application. These resource intensive processes might run at scheduled times, or they might be triggered by the events in the web application. I assume the second thing might incur much more complications on the solutions. I have a lot of questions about this, but for now, I'd just like to have some folks point out the common solutions. Changing to a EE application server is NOT an option.

chadmichael wrote:
Couple of questions:
1) What's the benefit of going to another app if you're still on the same server? I'm not being coy, I'm just trying to get a feel for the pros and cons. You could always run something on a timer from within the web application. Is there a performance benefit from being in another JVM? Then run it on the same server. No need to run it on another server if a separate JVM will do it for you.
2) How would you communicate with the main app if you needed to receive events or something? RMI?You stated it was on a timer. There is no need to be on the same server to run things from a timer. If it needs to be event driven a simple way would be to set up a separate instance of Tomcat (or Jetty) on the same or different server. Refactor out what ever the offending code is into separate servlet and have your main app just send the events off to the other instance.
There are a lot of ways to go about this. They depend on what your needs are.

Adding A Business Process To SolMan

Hi,
I've just upgraded our Solman system to EHP1 SPS22 and I'm now looking at business process monitoring.
From documentation I've seen you go into DSWP and select your solution and away you go, I've also seen mention of transactions solar01/02. I seem to be missing something here as our defined solutions don't already have business processes defined and I'm being a bit lame as I can't seem to see how you would add a new business process in.
Does anyone have any experience in doing this and is able to coomunicate process in a step by step guide to get us up and running?
Thanks.

Hi Spencer,
as you probably heard here and ther the SAP Solution Manager supports the whole lifecycle of a business process. Hence there are especially two logical parts
a) the project and business blueprint part which you access with your mentioned transactions SOLAR01/02
b) the operations part where you have a similar but nevertheless separate directory the so called Solution Directory that you can access via DSWP > Solution Landscape > Solution Landscape Maintenance or via the "Business Process Operations" Work Center.
In both directories you can maintain business processes from scratch or use the Business Process Repository or another Project or another Solution as source.
What you require for using Business Process Monitoring is that business processes are maintained in the Solution Directory. If so far you processes are only maintained in SOLAR01/02 then you can copy them into the Solution Directory.
You should find corresponding iTutors under http://service.sap.com/rkt-solman
You can also have a look into http://service.sap.com/bpm > Media Library > Technical Information for different technical papers explaining on how to setup BPMon.
Perhaps you also want to visit the FAQ page http://wiki.sdn.sap.com/wiki/display/SM/FAQBusinessProcess+Monitoring
Best Regards
Volker

MSI K8N neo 2 Plat System still to be Built from Scratch!!!

Hi to all,
My first post and it's gonna be lengthy I think!
I am not a gamer ever, most of what I do is Video encoding (mainly this 100% CPU hogging activity) and Graphics manipulation.
Below is a list of what I have to start my build:
Note that I do not overclock ever so please, no reference to this!!!
MSI K8N Neo2 Platinum (7025)
Athlon 64 3500+ 92nm Winchester Core (retail)
Cooler = Zalman CNPS7000B-CU Ultra-Quiet CPU Cooler (think I might have fitting probs with memory slots DIMM's 1+2(G/P) on the MSI Neo2 Plat board, DIMM's 3+4(G/P) might be my only option if I want to stick with this cooler but for fault finding purposes I can always use the stock cooler?)
Corsair TwinXL PC3200 - CMX512-3200XLPRO 400Mhz 2.2.2.5 LL
Antec True Power 550W with SATA supply (X2)
1 X Western Digital 74Gb SATA Raptor HDD (I want this as my C: main boot, no Raid)
2 X Seagate Barracuda 300Gb 7K2rpm SATA HDD (I want these as RAID 0/stripe=performance only)
GPU: On order!
http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=636
Will use my old trustworthy and reliable GeForce 2 Ti 64 Mb card for XP+SP1 instalation only.
1 X 120 Gb 7K2 HDD (IDE 1 Master) (from old set up)
1 X 120 Gb 7k2 HDD (IDE 1 Salve) (from old set up)
1 x PlexWriter 52x/24x/52x CD-ReWriter (IDE 2 Master)
1 X Pioneer DVR-108 Black16x DVD±RW Dual layer (IDE 2 Slave)
PCI = Creative Sound Blaster Audigy 2 Value 7.1 PCI Sound Card - OEM
Case = Lian-Li PC V1100 Black Aluminium Midi-Tower
Everthing is new in this set-up apart from my old IDE HDD's, still in boxes and ready to go ready for your input?
Q1. Quote
Keep in mind that you will need the special drivers to install your SATA Raid drives if you have any. When the windows install starts you need to keep tapping the F6 key to load those drivers from the diskette MSI supplied. "If you are using an Nvidia3 chipset with a single SATA drive and not raiding, you can skip this step, it will automatically be recognized by windows." (Tip Provided by timkessler)
Straight forward if you are using one or the other methods mentioned in Tiresmokes thread Basic Building Tips(which is gr8, thnx for that Tiresmoke). But as above I want my W/D raptor as my C: main boot drive only, no RAID?
Can I use the F6 option at the XP instal and then go on to set up the Raptor drive accordingly - and from there set up my 300Gb Seagates as RAID 0 (Seagates wont be attached till Raptor is set to C: main boot)???
Once I get to this stage I will start asking about board BIOS and Driver details which I dont know as of yet, like I said everything is still boxed.
I thought personally that starting this thread - people wanting to use this board would benefit from a brand new instalation from scratch guide from a relatively newbie point of view?
I know there are alot of issues regarding the boards features, but I thought if I done this in public the relevant problems could be linked as I go along, either with problems or without - depending on the individual experience?
pheeeewww, I said it was gonna be lengthy didnt I?

Quote
Originally posted by Supershanks
On install windows will see 3 drives all sata which is why i suggestd the configuration, i did you dont need to set up your raid array at all as the drives are just going to be data drives.
If you wish you could even install windows without f6 & loading any drivers
Having then got widows installed.
Seperate project to
enable raid in bios, creating the raid & let windows install drivers later.
assuming you have an original windows cd ie pre sp1, the quickest method of installation is to slipstream windows.
Basically you download latest service pack sp1 or sp2 insert your OS cd & run a program which merges the 2 & creates a new OS cd with the SP integrated. Any updates needed then are miimal.
see
Slipstreaming - Autostreamer Neowin - i'ts so easy i've heard grannies can do it
hope this helps
Looks like they moved the AutoStreamer thread, and updated to 1.033---> AutoStreamer 1.0.33

Automating Business Process.. Workflow or BPEL??

Dear All,
I hope you help me in this:
We need to automate all the business processes exists at the work. Currently we are using Oracle database and Oracle Forms and Reports to build all our applications.
The developers are excellent at SQL and PL/SQL. There is not any knowledge about Java or any other programming language.
Should Oracle Workflow be used to automate our business processes? Could it be used from Oracle Forms? or any other Oracle tools in general?
Or we should go for Oracle BPEL instead of Oracle Workflow?
I hope you help me in this
Emad

The idea is to automate everything. I am working in a university, so, there are many bunisess process such as:
1. Hiring New Employee: starting from the request of hiring the new employee up to the approving of hiring and signing the contract with this new employee.
2. Student Process: such as request to drop registered course, enrolling a closed course because of a special conditions... etc
3. Employees Requests: could be software/hardware maintenance request, could be electrical maitenance...etc
The nice thing that we (as IT department) has worked with the Quality unit at my work and we have documented every business process. So, now we know every business process from it will start and where it will end.
Now, we need to automate this. There is a debation that our developers should develop this system. I have said NO, there are Workflow Engines exist in the IT world and we have to study them and choose the best one for our needs.
We are using Oracle Database and Oracle Forms and Reports. We have excellent working experience in SQL and PLSQL.
Honestly, I have been thinking of Oracle Workflow, but Oracle BPEL beckons me.
Therefore, I am posting this thread for the sake of help from experts here who already has an excellent experience in this
Waiting for your participations..
Thanks

Automating Business Process.. should we go for BPEL??

Dear All,
I hope you help me in this:
We need to automate all the business processes exists at the work. Currently we are using Oracle database and Oracle Forms and Reports to build all our applications.
The developers are excellent at SQL and PL/SQL. There is not any knowledge about Java or any other programming language.
Should we go for Oracle BPEL to automate our business processes? Could it be used from Oracle Forms??? Or it needs to be used from other development Oracle tools such as JDeveloper??
I hope you help me in this
Emad

The idea is to automate everything. I am working in a university, so, there are many bunisess process such as:
1. Hiring New Employee: starting from the request of hiring the new employee up to the approving of hiring and signing the contract with this new employee.
2. Student Process: such as request to drop registered course, enrolling a closed course because of a special conditions... etc
3. Employees Requests: could be software/hardware maintenance request, could be electrical maitenance...etc
The nice thing that we (as IT department) has worked with the Quality unit at my work and we have documented every business process. So, now we know every business process from it will start and where it will end.
Now, we need to automate this. There is a debation that our developers should develop this system. I have said NO, there are Workflow Engines exist in the IT world and we have to study them and choose the best one for our needs.
We are using Oracle Database and Oracle Forms and Reports. We have excellent working experience in SQL and PLSQL.
Honestly, I have been thinking of Oracle Workflow, but Oracle BPEL beckons me.
Therefore, I am posting this thread for the sake of help from experts here who already has an excellent experience in this
Waiting for your participations..
Thanks

Business Process Monitering

Hi,
          My company has decided to implement BPM (Business Process Monitering). Can we implement BPM for the Template Project.
           What is the difference between "Solution" and "Template project"? Please provide me helpful answers.
Thanks in advance,
Sreekala.

Hi Sreekala
In Solution Manager, we have 2 different areas. One is project and another one is solution.
In both area, we can maintain business process. And we can also copy existing business process from different sources
(Business Process Repository, Project, Solution).
<Project is more used for implementation and test scenario. Operation is used for operation scenario like busines process monitoring>
So if you have something in project side (template project), you can copy existing processes into solution. And then
you can configure business process monitoring
(remember, business process monitoring uses business process in solution. not project side).
In case, you do not have anything yet, you can also try template BPMon setting that is avaialble in service market place.
It contains important application monitor (transactional document monitor).
If you are enterprise support contract or max attention contract and your SAP backend system is already go live,
I recommend you to take Business Process Analysis service to have insight of you backend system.
Then it become much clear where to start and how the tool can provide additional benefit.
(in more detail, contact SAP Support Advisory center)
I list up some important information sources. So please take a look at link below.
1)FAQ
http://wiki.sdn.sap.com/wiki/display/SM/FAQBusinessProcess+Monitoring
One of topic is about the project. So you can get some information in here
>"Can business processes from the project part (SOLAR01) be reused for Business Process Monitoring? "
2)BPMon functional scope
More detail info about BPMon.
/people/volker.vongloeden/blog/2009/07/23/functional-scope-of-business-process-monitoring-in-sap-solution-manager
3)BPMon template
About BPMon template
/people/volker.vongloeden/blog/2009/07/29/business-process-monitoring--template-configuration-available-for-download
4)BPMon setup guide and general introduction
Technical information
http://service.sap.com/BPM --> Media Library --> Technical Information (contains configuration guides)
                                                                         -->Customer Information (contains overview and avaialble monitor info)
Best Regards
Keiji Mishima

Business Process for Casting Iron industry

Hi All,
We are going for a implementation for a casting iron industry... can you please let me know what will be the business process required for such industry.
Thanking you all in advance
Rgds
Toshniwal

Hi there,
The BUSINESS process should be determined and explained by the business - this is the purpose of the blueprint.
In the blueprint phase you will build-up an inventory of all the business processes from your client (AS-IS) you can then map them to SAP processes and these become the TO-BE processes.
As to perhaps SAP solution, your project manager should know what industry solution (if any) is being implemented.
I would imagine that for this industry you would implement FI, CO-PA, PP, MM and SD - at least.

Business Process Modeling for Online Mobile Solutions

Hi,
I like to know what are the options available for business process modeling for online mobile applications? I feel Guided Procedure can be used for that but one issue is the standard GP Runtime view may not be suitable for Mobile displays and needs to be modified. Is there any other option available specifically for mobile solutions? Also I read in one article in SCN about a product call Mobile Fast Track (MFT) which is supposed to be delivered on Visual Composer. Is it already available? If yes which release and how to get that?
Any pointers on these will be highly appreciated.
Thanks,
Dipankar

Hi Alvaro Hernán Rojas R ,
The product line is the hierarchy of the finished goods.
It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
Thus logically you should map in solution manager based on the process only.
The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
From the point of view of all of the below three,namely,
Easy configuration activities
Easy design of Unit and integration test
Easy activities of Process enhancement and optimization,
the option Map the process as ISO Standards
- Several projects : For each product line,will be most ideal.
It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
Hope this helps.
Regards,
Ramesh

Problem with business process modelling

Hi guys,
Im facing a new problem, while trying to build a new business process in Solution_Manager im getting the runtime raise_exception each time im activating the business process details button.
What are the reasons? And how do i handle it?
P.S. Is there any good documentation on configuration of business process?

I'm agree with Dimitri,
Is there any good documentation on configuration of business process?

Building a Composite Business Process from Scratch-Guided 1 (Cannot Build)

Similar Messages

Maybe you are looking for