Bulk Items in Work Orders-How to Avoid Issuing

Prior to Complete - No Charge process, we review work orders for any material that was not issued. Frequently BULK items (screws etc) are not issued for productivity reasons
Is their a way to prevent these items from showing up on the work orders in the first place?

Hi
Bulk component is used when you want to communicate to the shop floor that this component must be used but need not be transacted.
This component is not backflushed. In the same way, it is not issued when you issue all components for an assembly. However, you cam manually issue specific components to a discrete job.
Regards,
Ricardo Cabral

Similar Messages

  • I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

    I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

    Ignore it. 'itunes:order' is a recent addition which FeedValidator doesn't know about. If your podcast is rejected that is unlikely to be the reason. Of course as you haven't posted the feed URL nor the text of the error message I can't make any further comment.

  • GI Consignment item in work order

    Hi,
    When issue a work order with consignment item, we will need to identify which vendor to select.
    But what should we do if one vendor didn't has sufficient stock on hand?
    Is it possible to select 2nd vendor in one WO issue operation, to avoid another WO makes the GI as unplanned issue status.
    regards,
    Steven

    Hi King Fischer,
    After you have released an Order, if you delete a Component or an Operation with Component and saved. You cannot re-set the deteltion Indicator.
    By going to the path Edit --> Deletions --> On/Off. You can only see deleted entries but cannot re-set the same.
    If you want, please input the line again.
    Also please refer my post on the same previously
    Re-Activation of Deleted Operations / Components in Maintenance Orders
    Regards,
    MLN Prasad

  • Undo Delete of Component Item in Work Order

    In a maintenance work order it is possible to delete a component line item. The associated purchase requisition line item shows up with a deletion indicator.
    Is it possible to undo the delete either on the work order or the requisition?
    Thanks,
    KF

    Hi King Fischer,
    After you have released an Order, if you delete a Component or an Operation with Component and saved. You cannot re-set the deteltion Indicator.
    By going to the path Edit --> Deletions --> On/Off. You can only see deleted entries but cannot re-set the same.
    If you want, please input the line again.
    Also please refer my post on the same previously
    Re-Activation of Deleted Operations / Components in Maintenance Orders
    Regards,
    MLN Prasad

  • How to configure Two Tax Codes for single line item in work order

    Hi All,
    Please do Review the below scenario and tell me how to solve it.
    A) Certified Work Done Gross Bill Amt      100,000      
    Total Work Done Value      100,000      
    Less : Labour & Like Charges @ 30 % on Rs 100,000 =  30,000      
    Vat applicable Amount =      70,000      
    Add VAT @12.5%  Chargeable on Taxable Turnover of Rs. 70,000.00     = 8750
    Total Bill Value = 108750
    Service Tax @ 12.36% on 33% Value of Rs. 100000     = 4079
    G.Bill Amt = 112829
    Total Amt Due for Payment = 112829

    HI,  There is a possible solution for this scenario.
    1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
    2. While posting the Invoice (TRX - FB60) following steps need to be followed.
    3. Amount has to be split into two line items
    4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
        created for 12.5%
    5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that    
        was created for 12.36%.
    Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
    Regards
    K.Sanjai Babu

  • How to avoid the below nested select statement

    Please any one help me how this select statemet is working and      how to avoid the nesetd select statement .
    if we avoid below nested , does it improve performace ?
    select field1 field2                                  
               into table w_feeds                                 
               from ZTable as t                         
               where field2 in r_feedf1                       
               and  POSITION_POSTDT =                           
               ( SELECT MAX( position_postdt ) FROM zTable 
                      where position_postdt le r_pdate-high    
                      and   field1 = t~field1 ).
    Thanks in Advace.

    Hi,
    Instead of nested query go for two separate queries. I see you are querying on the same table...so better go by this approach
    select field1 field2 POSITION_POSTDT
    into table w_feeds
    from ZTable
    where field2 in r_feedf1.
    Remove the where condition on POSITION_POSTDT
    Sort the table w_feeds by POSITION_POSTDT  Descending; So you will get data pertaining to Max Position_Postdt.
    Finally delete the other entries which are not Max.
    This will enhance the performance over the nested query.
    Regards
    Shiva
    Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM
    Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM

  • Approval for material return issued against the Work Order

    Hello,
    We are using PM module and issuing materials against the work order.  Many times users are returning the un-used material back to stores.  This un-used material may come back <b>with or without</b> work order reference.  i.e. Sometimes they just return bunch of material but don't know the work order # against it was issued initially.
    We need to control this flow of un-used return material through proper system approval.
    How can do this.
    Thanks,

    Hi,
    In standard SAP There is no approval process to return the material.
    I have one work around , you can create one PM order to return the material & instruct your store people to receive the material only with reference to PM order.
    With out releasing a PM order, system will not allow to post the goods return.
    I hope it may help you.
    Regards,
    Manish

  • Link multiple work orders

    Example:  An inspection is being performed based off of a work order.  When an issue is found that requires a notification, a notification type was created for such findings from the inspection.  When that "findings" notification is converted to a work order, how do I link this to the original inspection work order?

    Hi,
    You have some limited options to acheive this viz. You can acheive this by developement like when you create some Notification you can mention the old order number in Reported by field via enhancement but create notification individualy and when you create new order it will link to this notification as well as in notification you can see the original order number.
    Otherwise just try utilize some field to group this like you can use Revision field to by creating a revision for this Inspection and and put that revision in both the orders and as well as in Notifications (from EHP4 revision is available in in Notification too).
    Thanks,
    SS

  • Issue with Cost center in PO and Work Order

    Dear Expert,
    I am facing an issue with respect to cost center in Purchase Order and Work Order. The PO is made against a work order. There are two cost center associated with the work order. One is updated under u201CAdditional datau201D field and other is at u201Clocationu201D . So the cost center in PO should essentially be the same one mentioned under u2018locationu2019 field of work order. So the issue here is that while creating PO, the cost center is picked from the u201Cadditional datau201D field of work order not from u2018locationu2019 field of WO.
    Is there any exit available that needs to be implemented for overriding the cost center in PO or any other way of solving this problem?
    Thanks in advance.
    Thanks
    Deba

    Hi,
    I guess that there is already some user exit or enhancement in place, since this doesn't sound like standard SAP (picking the cost data from additional data, or even having it there).
    Mario

  • Issue unit of measure being used in purchasing tab of work order

    Hi, I've got a material with a base unit of measure of 'EA'.  This material has a issue unit of measure 'BOX'.  When I go to add this material as a component to a work order the unit of issue 'BOX' is used as the base unit of measure.  This of course is incorrect.  Can anyone shed any light on this?

    Not sure whether it will help you.
    Have you maintained the relationship in MM in Additional uom tab.
    Also check t code CUNI if any conversion factor you can mention there.
    Regards,
    Divraj

  • Goods Issue against Work Order assigned to WBS - Report

    We are doing Goods Issue against Work Order with movement 261, the data picked up from work order is not including
    the WBS element mentioned on the work order. Through this WBS element report is created through MB51, with total receipts, total issues, transfer postings etc made against WBS element, but without WBS element No. in material document,
    we cannot pull this report through MB51, as we see material document No.created against work order but not the WBS
    No. there, so this report cannot be pulled from MB51 through WBS element.
    Does anyone know of any other report that I can pull From WBS No. as all these material documents are hitting WBS with
    total receipts, total issues, transfer postings against the said WBS mentioned in the work order.
    Doing Good issue against WBS is no problem, as the material document saves the WBS No.

    >
    Justin zhang wrote:
    > 1. Try to see CN52N whether meet your business requirments
    >
    > 2. I use two steps approach investigating material documents for project WBS element:
    >
    >     a.  use IW39 list the work orders by selection criteria of WBS (this is PM order list).
    >     b.  use SAP std. ALV copy functions and past work order numbers into MB51selection criteria
    >
    >
    > I'm interested in std. t-codes if others can provide. Thanks.
    >
    > Edited by: Justin zhang on May 19, 2010 10:17 AM
    Thanks Justin, your IW39 solution worked, as it has posting date selection defined there
    which I cant find in CN52N. My solution was take details from MB51, then pull report IW39 within
    posting dates and then export the WBS elements against work order to excel and then copy
    the WBS elements in the MB51 report created.

  • How to avoid XVBPA line item values while creating sales order

    Hi Friends
    I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
    I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
    So this line item also coming in VBPA table, because its different from header data.
    Anyone guide me, how to avoid this problem while booking order through program.
    Thanks
    Gowrishankar

    I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
    In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
    So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
    its not copying the same value from header to line item.
    In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
    Thanks
    Gowrishankar

  • How to delete line item in a Work Order (only a line created in operation)

    Hi,
    I have created a refurbishment order to refurbish a mechanical seal at external parties. In the work order operation tab, I have created one line items for this purpose and a Purchase Requisition is generated. Suddenly, operation decided to cancel this request and I have problem to delete the Work Order and  Purchase Requisition. I have tried to delete the operation line item but failed. This is the message when try to delete the line item " The last active operation cannot be deleted".  Appreciate help on how to delete this Work Order and Purchase Requisition.
    Edited by: Zahari Yusof on Apr 4, 2008 3:20 AM

    hi
    In Standard SAP while creating an order the short text you are specifying will automatically appear in the first operation,also in order system will ask you to enter atleast single operation ,hence it is not possible to delete the operation line ,
    what you can do this either TECO the order which will clear any open PR for this
    or create another operation with control key for internal activities say dummy with operation no 20 and save,then go in to order in change mode and try to delete the operation line 10 ,i think system will allow you to do that
    regards
    thyagarajan

  • How to avoid automatic data change in service notification from work order

    Hi,
    when I change work order address data the address data from the service notification connected to the order is changed too, how can I avoid this change? Is there anything on customizing to control whichs fields are updated automatically.
    Thanks,
    Juan.

    Hi,
    You can trying using Books of Business.
    Create a book and add that particular user to that book and at the time of task creation, through a workflow you can assign it to the corresponding book.
    This might resolve the access issue you are facing.
    hope it helps,
    Mayank

  • Work Order Smartforms.. How to get the Service level Items...

    Hi Experts,
    I am working on Work Order Smartform... I got everything but i am stucking at Service level Items... There is one Table called ESLL.. I am trying to fetch the data from that table but its not printing.. So, please help me regarding this issue.. any logic to implement it..
    Thanks in Advance
    Regards,
    Murlaikrishna

    Hi Karthik,
    For every PO we have item level data... in that we have Service level data tab. But there is no link between PO and Service level items to fetch, I have used the tables EKPO and ESLL for fetching the data from service level by usin PACKNO field.
    When I am writing the select statement for ESLL, service Item level data is not printing from ME23N...
    Thanks in Advance,
    Regards,
    Muralikrishna

Maybe you are looking for