Bundle JRE and install from custom installer?
I want to bundle the JRE within a custom Windows Installer I'm writing. I want to install the JRE into the root of the install directory that the user specifies. What's the easiest way to do this? Thanks.
-Brian
OK, here is how I solved it.
First, I got fileWATCH 5 from:
http://kevin.gearhart.com/filewatch/download.htm
Then uninstalled the Sun software.
Next, I used fileWATCH to take a snapshot of the system.
After I installed Java again I opened the snapshot and fileWATCH created a log file that I was able to use to figure out the location of every installed file and registry entry.
Hope this helps.
P.S. Save the log file or you might have to start all over.
Similar Messages
-
If I already have the android SDK and AVD installed from prior installation for eclipse do I have to
If I already have the android SDK and AVD installed from prior installation for eclipse do I have to do it again for dreamweaver if I want to develop for android ?
Also, if I'm developing for android, ipad, and iphone and I want them all to be the same can I do it by only making one site or I have to make a different site location for each?Inquire of whom? Apple? Seems to me your carrier is giving you the run-around. They are the ones who provide the service, so they should be able to tell you the plan specifics. Get on the phone again with them and insist on an answer.
-
Computer locks up, so I want to reinstall the OS. I had upgraded to Snow Leopard.
Tried to do an archive and install from the DVD that came with the computer, but that failed.
Tried to do an erase and install, but the install stops somewhere near the end, 13 minutes to go. Tried several times, same result.
Can't reboot from the install disk, it just ejects the disk and I get the flashing question mark.
Any suggestions will be appreciated.I think my hard drive is toast. When I boot in single user mode, I get the following text:
CSRHID Transition Driver: start booting in single user... will wait for window server
Then the following text appears, repeating itself over and over, except that the numbers (indicated by "xxxxxxx")
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
disk1s3: I/O error.
0[level 3] [READUID 0] [Facility com.apple.system.fs] [ErrType IO] [Err No 51] [IDType READ] [PB1kNum xxxxxxxxx] [LB1kNum 0] [FSLogMsgID xxxxxxx] [FSLogMsgOrder First]
0[Level 3] [READUID 0] [Facility com.apple.system.fs] [FSLogMsgID xxxxxxxxxx] [FSLogMsgOrder Last]
These messages keep repeating with the numbers (xxxxxxxxx) changing with each iteration.
Does this indicate a bad hard drive?
Thanks. -
Installing Oracle APPS - Burning DVDs and installing from then!!!
Hi all,
I'm finishing the download of Oracle Application 11i (33GB) and i don't have space enough to create a staging area and install from this area. I want to install from DVDs. How can i do that? What files i burn in each DVD?? What is the order?? Can i unzip some of these downloaded files and burn a DVD and do it again until it finish??
Tks,
Paulo.Hi,
I was install and unzip all DVD-s (9 pcs) into main HDD (60GB c:\stage12\)
and when I was run PROD installation I was modify path to
E:\ - external HDD with 250 GB !!! where I was creating instalation path
E:\oracle\prod.
(VIS installation need 250 GB min!)
I have and one more HDD (externall too!!) with 160GB
So, u need definitelly one more hdd or one with min 250 GB or 1/2 terabytes
whats the best solution! -
Booting from disc vs erase and install from disc
I need to erase and install.
I need the cleanest installation. I was thing about "erase and install" from the disc.
I know some people like to boot from the disc.
What is best?
Thanks.To do an erase & install, you'll have to boot from the disc.
Cheers, Tom -
Advance to Supplier and Advance from Customer
Hi,
I like to know what is procedure to import Advance to Supplier
and Advance from Customer in SAP B1 as a Opening through DTW Tool.
Which template to use for this type of transaction?
What is Impact of Advance to Supplier and Advance from Customer into SAP B1 Accounts?
Please provide step by step procedure to impliment advance payment and receipts.
Thanks in Advance.
IT TEAMHi,
Welcome you to the forum.
Your first posting has no response for many months. Have you got is solved or still pending?
For this new question. Rahul is correct. OVPM.Payment is for supplier and ORCT.Receipts from customer. The Handwrtten should be Y for advance payment.
Thanks,
Gordon -
Can you do an archive and install from a download update?
I upgraded to Tiger and 10.4.4 came on the disc I bought. I'm running into some problems w/ utilities that I have and would like to do an archive and install from the 10.4.10 download. The only option is an easy install though.
Welcome to the forums!
You cannot Archive & Install from a downloaded update. You need to do an Archive & Install from your 10.4.4 DVD, then download and run the 10.4.10 Combo Updater. -
I have problem with the Movie application 7.1.4 (585) when I try to open it a statement indicate that there are some "MIssing Quicktime components, re-intall from movie installer" . How can I fix thi problem. Please help.
Acrobat Support
-
Hello,
Recently, I had a task where I needed to install a custom non-signed driver onto my Windows 8 64-bit setup. As it is known, Windows has driver enforcement policies that, as a security measure, do not allow you to install non-signed drivers.
I did not want to alter my current boot configuration so I decided to create a separate boot entry that would have driver signing policies disabled. For some reason I did not find any good source that would contain a step-by-step instruction on completing
this task, so I decided that I'd better share my experience here.
Lastly, there are multiple ways how you could turn off driver enforcement policies, but I find the way to do this via boot manager.
Here's how you can do that.
1. Press WindowsKey and type 'cmd' (without quotes) to find Command prompt, then click Command prompt icon. If you have User Account Control turned on, hold Ctrl+Shift keys pressed when clicking the icon.
This will force Windows to ask you for elevation of command prompt. Elevation is necessary for editing Boot Configuration Database (BCD), the database used by Windows boot manager to store boot settings.
2. In the User Account Control window click Yes to confirm elevation of command shell.
3. At the command prompt type
bcdedit
to list your BCD entries.
This will give you an output like:
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
The section that starts with Windows Boot Manager lists current settings for the boot menu. Here you find what boot entry is chosen by default, this is the one what you will boot into if you do not select any boot entry in the
boot menu.
The following record
default {current}
indicates that by default my Windows boots into configuration which I use at the moment (currently booted Windows configuration).
To find out what exactly is current configuration, look into the list of boot entries, records that contain boot loader configuration and are titled as Windows Boot Loader in the bcdedit output.
For example, the entry shown above is one of my boot configurations. This is one of the boot entries listed on the boot manager screen when I start my PC and it looks like:
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
This record has a unique GUID identifier that can be used to reference this boot entry, which is:
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
If we look at the Windows Boot Manager settings, we'll see this entry is the first in order to be displayed in the boot menu on OS start (I marked the unique bits):
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
It references my VHD drive, a virtual hard drive where my Windwos 8 setup is residing:
device vhd=[D:]\win8prowmc01.vhdx
And it also specifies that the boot manager must use UEFI BIOS extension code to access my Windows boot partition:
path \EFI\Microsoft\Boot\bootmgfw.efi
3. Now locate the current boot entry.
Current boot entry contains boot settings used to boot into Windows configuration to which you are currently booted. It is referenced in the list of boot entries as a Windows Boot Loader record that has the {current} keyword inside and may
look like:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Because we are more than happy with current configuration and want to base our new boot configuration on these settings, we need to copy this boot entry ({current}) to a new boot entry.
This is done by running the following command:
C:\Windows\system32>bcdedit /copy {current} /d "No Driver Signature Check"
Parameter /d here indicates that the following sequence of characters specifies the display name for the new boot entry that we are creating. The name inside the double quotes will be displayed in the boot menu when you boot your Windows.
In other words, if you know restart your system, you'll see the new No Driver Signature Check in the boot menu.
When copied, the entry is automatically given a new GUID identifier, so upon running the command above, you'll see the following line returned (you'll have an other GUID since these are unique identifiers):
The entry was successfully copied to {a329b5d8-fb29-11e1-a74d-f2c962d62240}.
4. Make sure the entry has been successfully created.
Run the same bcdedit. (You may specify /enum or /v, or both /enum /v parameters at the prompt to get more detail about boot entries, but simple bcdedit is just enough to see the new entry):
C:\Windows\system32>bcdedit
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
The entry has been created and given a unique a329b5d8-fb29-11e1-a74d-f2c962d62240 ID. It now has exactly same boot settings as the boot entry we used to boot into current configuration of Windows.
5. Modify created No Driver Signature Check entry and specify that Windows must have driver integrity checks disabled when booted using this boot entry.
Any modifications to boot entries are made using /set parameter. To indicate that we modify a specific boot entry, we must specify the GUID for the No Driver Signature Check record, which is:
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
In other words, to edit (add or change) an option for the boot entry, we need to use the following command syntax:
C:\Windows\system32>bcdedit /set GUID <boot_option> [<option_value>]
First, we must specify that we don't want integrity checks be made. This is done by adding the loadoptions option and setting it to DISABLE_INTEGRITY_CHECKS value:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} loadopti
ons DISABLE_INTEGRITY_CHECKS
The operation completed successfully.
6. Verify that load option has been added.
Run the bcdedit command:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
7. Add the option that turns on test signing mode and disables checks of driver signature.
Adding the testsigning option and setting it to ON does the trick for us:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} TESTSIGNING ON
8. Now we have a boot entry that enables Windows not to do integrity checks and digital signature validation.
We check it by running bcdedit:
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
testsigning Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
9. Type 'exit' without quotes to exit from command prompt, and restart Windows.
Upon booting you will be present with a new boot option to start Windows in configuration that allows you to install custom non-signed drivers.
Hope this will help anybody to create their own custom boot configurations.
Well this is the world we live in And these are the hands we're given...Hi,
Thank you for sharing the solutions & experience here. It will be very beneficial for other community members who have similar questions.
Regards,
Kelvin hsu
TechNet Community Support -
I have had several kernel panics on my iBook G4; the panic message shows up just after the desktop appears. Although the startup volume shows up in Startup Disk, the installation disk reports an error when I attempt an erase and install. Disk utility is unable either to erase or partition the hard drive. The hard drive shows up in disk utility, but the startup volume doesn’t HELP!!!
Do you have the original system discs that came with the iBook when it was new?
Which exact iBook model is it?
You can choose from this list:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
Erasing the disc and installing Mac OS X 10.5 will result in loss of the other applications (such as the iLife applications) which came pre-installed on the iBook. -
Install from software failed AND install from DVD failed....
I downloaded Mountain Lion from the App Store and burned a bootable disc, or so I thought, before installing. Upon installing (from the hard drive version), the hard disk failed and ML wouldn't install, nor would the drive even mount any more. (Luckily, I ran time machine so my dada isn't lost.) So today I bought a new HD and spent 4 hours zeroing it.
I put in the bootable DVD and, after 10 minutes, it finally tried to install. Then it said "There was an error installing the system. Please try reinstalling the operating system." (Dear Apple, that is not the mot helpful error message.)
So, I tried to use the utilities on the DVD to restore from my Time Machine backup, but the tools never loaded!!
I finally got the old drive to mount, so I started CCC but now the drive unmounts itself about 3GB into an attempted clone.
I don't have a Lion DVD because I can't find the one that came with my MacBook.
NOW WHAT?! :-(
My Mountain Lion App Store purchase is verified right? Can I attempt to download the ML installer on my 10.6 machine and possibly re-burn a disc? (Does it matter if it's +R DL or -R DL?)You mean updating from the downloader? I tried that first, it's what crashed the drive to begin with.
-
How to include jre and program in an installer?
Hi,
I need to make a complete package where latest jre and my program jar file will be within.
How to pack those in an installer?
Thanks in advance.Hi Suresh,
Executing the program RSAQR3TR or directly using the Transport option from SQ02 is the same.
Please help me out on this requirement.
Thanks & Regards,
S.Lakshmi -
Can I Archive and Install From Leopard Up-To-Date Disc?
I'm a Mac newbie, so I apologize if this is an obvious question.
I purchased my iMac this month, so I received a Leopard Up-To-Date disc for $10. The CD says Upgrade on it, and I can't find any options for what type of install I want to run. I've seen things like Erase And Install, Archive and Install, and Upgrade posted here on the forums, but the only options I have are whether or not to install things like Core Services, X11, etc. Can I not perform an Archive and Install with this disc, and if I can't, is there any chance I could request a full CD from Apple?
Message was edited by: AceDewYou should be able to -- when you get to the screen that asks you to choose your installation destination, highlight the drive, then you will see in the lower-left an options buttion. CLick it and you will find three choices: upgrade, archive/install and upgrade install. Choose the one you want and enjoy!
Keep in mind that when you put the disk in, the system will verify that the DVD is OK -- it takes a few minutes, but it is worth knowing that the disk is not corrupt before you start. Also, repairing permissions seems to take awhile -- just let it happen. -
Archive and Install from external DVDROM?
My Dvd-rom is broken so I bought an external optical drive. Lately, my software (such as Word and Powerpoint), have not been opening correctly. Apple Support suggested that I do an Archive and Install.
Will I be able to do this from an external optical drive?
Thanks,
DanielleYes, as long as the external drive is bootable. Insert the installer DVD into the external drive then restart the computer. After the chime press and hold down the OPTION key until the boot manager screen appears. Select the icon for the external DVD then click on the downward pointing arrow button. The computer should boot from the DVD. Follow these instructions for the Archive and Install:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Download and Install from Ovi in N9
Hi I am having some problem while downloading and installing some programs from Ovi Store. The Message " Couldn't Start Operation" " Refreshing Cache-Please Wait" Message appears in the Screen and download and installing can not be done. Please suggest the way to resulve this issue in my Mobile...
@sanmob
Try this:-
Go to Settings > Security > Developer mode > move white dot to right and accept prompt
Launch Terminal as new icon ( ~ $) will now have appeared and type the following on each line followed by tapping enter:-
devel-su
rootme (password unless altered by user)
rm /etc/apt/sources.list.d/filemanager.list (to delete the problematic repository - note space after rm )
- Reboot the device
- Open X-Terminal
devel-su
rootme
apt-get update
Happy to have helped forum with a Support Ratio = 42.5
Maybe you are looking for
-
Why am I getting wavy, distorted video on a DVD made with iDVD?
I made a DVD with iDVD 5 that has wavy, distorted video. It is watchable but you can clearly see that vertical lines are somewhat wavy whenever the camera pans across the scene. An up-down pan doesn't distort the horizontal lines, however. The source
-
11.1.14 install reinstall not working
Tried to do the 11.1.14 update last night for my Windows 7 laptop. It failed to install. I shut down for the night. This morning I got an 'MSCVR80.DLL missing' notice even before my desktop was fully operational. Got it later when I tried to open iTu
-
Mail PDF from Pages...doesn't use default app
Have set Mail to indicate Thunderbird as default mail client. Clicking on a mailto link in Safari opens Thunderbird, as expected. But... In Pages, doing Share/Mail PDF, Mail opens, not Thunderbird. Have examined the Preferences .plist where such inst
-
Had quite a few 'Out Of Memory' messages from the Adobe site this afternoon - perhaps they should add another Gb or two !!
-
Flashbug does not work with Firebug 1.8 and Firefox 9. It does work with FF 8. I need to revert to FF8 so I can debug some critical Flash projects. How do I revert or re-install FF8?