Burn DVD from Youtube

How can I burn a DVD from Youtube?

You can watch Youtube videos on your TV many ways. Many newer Smart TV's have a Youtube channel, if yours does not have that ability you can also get an AppleTV ($75 refurbished from Apple's online store) and view Youtube and much much more including your own video library, photo library, etc and other channels. If that is of any interest to you, click http://store.apple.com/us/product/FD199LL/A/refurbished-apple-tv for information.

Similar Messages

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

Burn dvd from Aperture

burn dvd from Aperture
How do I select photos, projects to burn for a dvd?

Frank's answer tells you hao to export your slideshow movie on a data DVD. But if you want to burn a video DVD that you can play in a DVD player you will need additional software, see Karsten Schlüter's User Tip:
How to create a video-DVD? (Macs without iDVD): Apple Support Communities
Regards
Léonie

How do i burn dvd from iMovie

How do I burn dvd from iMovie. iMac has yesomite installed.

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

What software is good to burn DVDs from my iMac ?.

What software is good to burn DVDs from my iMac ?.

It's what iDVD is for. If you don't have it:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

Best quality dvd from YouTube

How can I keep the best possible quality when burning a DVD form a YouTube video?

ask the person who posted the video to send it to you under the original format. (remember: downloading and using videos from youtube without having the video owner's approval is illegal)

Burning DVD from disc image

I've been burning DVD's from disc images using Encore 1.0 for some time now. ever since I upgraded to 2.0, Encore gives me error messages on my project like:
"first play not set" and
"remote control problem".
I don't see how these messages can appear when I'm using a disc image (i.e. a completed project) as the source. does anyone know?

When you click on the Build DVD button in the Disc panel, Encore does a quick check of errors
in the current project. If you have a new, empty project, you will at least get errors about First Play and Title Remote. Those errors have nothing to do with your disc image, they apply to the current project, from which you are trying to burn your disc image.
These errors may be safely ignored, since they don't have any effect on your disc image.
-Jeff

Burn dvd from imovie

How do I burn a dvd from imovie? Using imovie as updated when Mavericks was installed.

Do you actually have iDVD?
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

Burned DVD from iphoto but pics are black

I burned a DVD from iphoto that contained a large file of pictures. Upon opening the disk I could see the pictures. However, after scrolling through a few of them, my iphoto became extremely slow and then the pictures would not come back. Instead of seeing a picture I see a black box with a dotted frame where the picture should be.
The DVD worked when I opened APSE and I edited my pictures that way.
But why is my iphoto not cooperating with a disc that was created with iphoto?
Is it because I created the disc using an older version of iphoto?

Has something to do with me renaming the rolls of film.

Burn DVD from video

Somewhat a rookie so go easy on me. I produce a 30 minute TV show in Final Cut Express. I print to video for my media that I give the TV station. I'm often asked to present one of my episodes to a club, etc. A DVD is most convenient for this. I've never had luck printing a good DVD from FCE...I'm sure it's my technique. So, I got the smart idea of using my edited and finished video that I would send to the TV station and use iDVD OneStep (iLife 09) to produce a DVD. Everything seemed to go fine until I put my new DVD in a DVD player...no sound. The image quality is very good and very happy with that...but no sound. What have I done wrong or is iDVD simply not made for this purpose?

Hi
There is a lot to this. Some basic.
DVD - is a standard in it self - CAN only do SD-Video (as old CRT-TVs at it's best)
Neither iDVD, Roxio Toast™ or DVD-Studio Pro - can do anything better.
(Roxio Toast 10 (11) Pro incl BD-component - Can burn to Blu-Ray and even small movies
as this on Standard DVDs - BUT they NEED a Blu-Ray Player to be viewed)
*DVD quality*
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality *(movies + menus up to 120 min.)* - BEST
• Best Performances *(movies + menus less than 60 min.)* - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov *(not selfcontaining, no conversion)*
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x4 (x1) (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a shortlived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
*Blu-Ray / BD* can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to plyback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera recorde in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Converting and burning DVD from NTSC to PAL

I have created a DVD using iMovie (6.0.2) and iDVD (6.0.2) using NTSC format. I want to share a copy of the DVD with relatives oversees and I have been trying to create/convert a DVD formatted for PAL. I have not had any success!! These are the steps I have used:
1. Under PREFERENCES, I selected 25 fps
2. A message window came up indicating the original iMoive file was converted from 29.97 fps (NTSC) to 25 fps (PAL)
3. I Selected Save As and saved the converted iMovie file at 25 fps as a different file
3. I Opened the Saved iMovie file under iMoive checking that the PREFERENCES was set at 25 fps
4. Export from iMovie (full quality) the movie (I have selected 25 fps under PREFERENCES prior to exporting
5. Import the movie file I just exported and then set the chapter markers and save the new movie in iMovie
6. SHARE the new movie and select iDVD
7. When iDVD opens, I check the PREFERENCEES and it has PAL set in the preferences and also has PAL selected under Poject Info
8. I set up all the themes, fonts, etc. to customize my DVD
9. I then select BURN DVD and I get the following message: "TV Standard Conflict? It seems that we are burning a NTSC movie on a PAL disc. Proceed with burning?
ANY Suggestions or Advice would be greatly appreciated!

Hello Morris,
you do not actually have to convert your iMovie NTSC project to PAL before burning in iDVD. just go to iDVD preferences and select PAL as new standard, then create a new project and import your NTSC iMovie. iDVD will do the standard conversion AND encoding.
the NTSC/PAL conversion done in iDVD, however, doesn't produce the best results - give it a try though, but if you're not satisfied with the DVD's quality, consider getting JES Deinterlacer to do the standard conversion. this software can handle directly the reference movie stored in your project and will output the converted movie to the same location, so when you open your iDVD project, it will be in your media pane
JES Deinterlacer is freeware and you can find it here:
http://www.xs4all.nl/~jeschot/home.html
hope this helps
mish

Burn DVD from iPhoto

Using iDVD 7.0.4 & iPhoto 8.1.1.
Music :If I burn a DVD from an iPhoto Slideshow, will the music in the slideshow be on the DVD ?
Text Slide :I want to add one or two slides which just have some text on - probably - a black background, how can I do this ?

I like iPhoto for slideshows, and what I do is Share/Export the slideshow to full-quality, large Quicktime video, including the selected audio. This video file can be dropped into or imported into iDVD.
You can create a graphics file in Photoshop or other software and save it as a jpeg or similar format. This can be imported into iPhoto without any difficulty.
John

Burn DVD from IPhoto slideshow

I read an earlier discussion on this topic but it made the process of burning a DVD from an IPhoto slideshow (with ITunes music track) almost impossible. I did try bringing the show into IDVD but the "formatting" of the "shows" you can choose from aren't appealing. Is there an easy way to do this?

I found it easier to create and burn DVD slide shows from within iDVD, but before creating the slide show, I read the instructions provided by the iDVD "Help" menu. I don't remember the exact steps, but I remember dragging a folder with the pictures into the iDVD window first. I duplicated the folder and saved to the Desktop first, since I had to use Elements to enhance the photos before creating the slide show. By duplicating or creating a copy of the folder with the photos, I did not change iPhoto's folder structure.
You will find the instructions on iDVD's help, under "Getting Started," page 29. Preview will launch to show you all you need to know. However, since I could not copy and paste the text on Preview, I printed just page (29) with the instructions.

Disk Utility - Burning DVD from desktop file created from camcorder

I am unable to burn a DVD from a file on my desktop. When trying to use the upper tray, the disk drive won't remain closed and I am unable to proceed.
When using the lower tray, it begins the burn process, then returns this message:
Unable to burn file. The device failed to respond properly, unable to recover or retry.
The upper tray is a HL-DT-ST RW/DVD GCC-4480B
The lower tray is a Sony DVD RW DRU-530A.

Thanks for answering ALL the questions, too many times I ask as many questions as possible to get as much info as possible and I get a one line response.
4GB file with Disk Utility should be fine.
4x speed should be fine too, but you may want to try 2x, just in case the ATA-33 bus is struggling. The ATA-33 bus is the original bus in the MDD for the optical drives, the hard disks were on an ATA-66 and ATA-100 bus. Unfortunately ATA-33 is very limited in the amount of data it can reliably send in a given time, and 4x DVD burning is the absolute limit.
Sony DVD-R should be fine, many here are wary of Memorex media, I use it for temporary copies of product / games discs, but never for backups.
How is the external DVD burner attached ? FireWire ?
It really should be working, you've already confirmed that both the drives successfully burn CDs, so we know they're recognised and operating. And you've said the 4GB camcorder file is on your desktop, ie. on the internal hard disk, so we know it's not a speed issue with the source file, like if it was on a flash drive - or is it ? Or is it still on the camcorder ? If so get it copied to the internal hard disk.
Can you confirm the ATA-33 bus and Disc Utility support for the drive by using Apple System Profiler, if you select ATA, it should appear on the ATA-3 bus. You'll also have an ATA-4 and ATA-6 bus.
If you click on "ATA-3 bus" you should find an entry "Disc Burning" and it should say "Apple Supported" or similar. If it doesn't then I don't think you can burn with Disk Utility. Generally, above OSX 10.4.6 (or 10.4.5, can't remember exact) all these drives are supported, for burning and booting from. I suspect you're fine as you've said you burn CDs with it fine.
One thing some people do is to buy an ATA-133 PCI card, and run the internal hard disks off that and the ATA-100 on the motherboard. Then use the motherboard ATA-66 slot to drive the optical drives. Don't spend any money yet, we'd have to confirm that the burn speed is the issue. Like said, try burning at 2x or 1x.
Apologies now if my Apple System Profiler instructions are not 100% accurate, my OSX 10.5.5 Mac is unavailable just now so I've based my instructions on OSX 10.3.9 ASP.

Burn DVD from Youtube

Similar Messages

Maybe you are looking for