Burning the CDs from ISO files - Solution
I have just finished burning the cd images and as I type this my little baby is coming to life! he he :-)
I did try Nero but failed misrably so I offer the following as a solution that worked for me. Apologies to anyone if it appears I'm teaching 'Grandma to suck eggs'.
First you extract the files from the zips, uncorrupted zips that is, if you are using Winzip then the contents description etc will be displayed when you hover over the zip file with the mouse pointer.
Next add the .iso file extension to each of the 3 files you have just extracted
Next you need to create a Cue sheet/file. To do this go into notepad and create 1 file as shown below and save if with .cue file extension with the respective iso file.
FILE "C:\YOURDIR\sol-8-4_01-fcs-bin-ia-v1.ISO" BINARY
TRACK 01 MODE1/2048
INDEX 01 00:00:00
POSTGAP 00:02:00
Where YOURDIR corresponds to where you have the iso file stored.
You need to create 1 cue sheet file for each of the binaries with the .iso extension changing the references shown above to match the location and the .iso filename.
I then used cdrwin to write the file images loading each of the above cue sheets. But you could use any burning software that supports cue sheets, which give it the correct information to burn the image.
Hope this helps
Skaven
I tried the skaven_1 recommendations using the latest (v5.5.9.9) version of Nero. This version of Nero supports .iso extensions. It also supports .cue files. skaven_1's sample cue sheet works in Nero.
Despite all this the resulting CDs are unreadable on my Ultra10. All of the Solaris 9 CDs I have burned are readable on my PC.
I have burned other OS ISO images (BSD, OpenBSD, etc...) using the same version of Nero and they are all bootable on x86 machines.
I have found that if the CD is not readable using:
dd if=/dev/rdsk/c0t2d0s2 bs=2048 | od -Ax -xc | less
(BTW, this is a handy way to check the volume label at 0x8000 for the disk type)
it is unlikely to be readable (and therefore bootable) at the PROM level.
All of the other OS ISO images I have burned have been readable on the Ultra10 using the above command. NONE of the Solaris 9 images I have burned have been readable using the above command. The drive will "spin" and "click" indefinitely until interrupted (^C or kill).
Having scoured this archive, I have determined that some people are successful in burning the Solaris [89] images while many others are not. There seems to be no clear understanding on what is necessary for success.
Has anyone successfully burned Solaris 9 SPARC iso images to a CD. If so what specifically did you do to achieve this incredible success!? Detailed information on:
- version
- media
- technique
- phase of the moon :-}
would be most helpful to the rest of the community.
It would be nice if someone at Sun would chime in and provide this information. The information provided at the download area is less than informative. I have followed those instructions and still have not met with success.
Sun...ARE YOU LISTENING? If people have difficulty with obtaining and successfully using these OSes, it makes it harder for startups (like I am working with) to lay the foudation to use your hardware. If this is hard, we are likely to make decisions to use other solutions. Much as we may not wish to do this, it is the reality. We have solutions to provide in a limited amout of time.
Similar Messages
-
Making the CD from .ISO File
I downloaded Solaris 10 from the sun site. I extracted the ZIP File and got the .ISO Files.
I successfully burned the CDs for CD 2,3 & 4 but while I m burning the CD 1, my sonic CD Write is trhowing erro "CD is not compatible with source" , I again downloded the CD 1 considring that there was error in downloading earlier. I tried many time but result is same. Can someone help me?If you have OS X on a .iso disc image, then you have an illegal copy of OS X. The Discussions is an Apple provided help system. We cannot help you with illegally obtained software.
-
My problem is with burning ISO images to make a bootable DVD disc with OSX 10.10.1. I cannot drag and drop an ISO file (in this case, Ubuntu 14.04 server iso) to the disk utility and then burn it with Yosemite. I have to first open the ISO file, then attempt to burn it. The DVD it creates is unreadable. I tried to convert the ISO file to CDR and also IMG - same problem: disc unreadable error.
I then went back to OSX 10.9.5 and tried the same thing - worked like a champ. I was able to drag and drop the ISO file into the Disk Utility window and successfully burn a bootable DVD disc from the same Ubuntu ISO file I tried using with 10.10.1.
Hey Apple, what's up? You broke Disk Utility in 10.10.1. Has anyone experienced the same problem and found a work-around? I hate to have to keep booting an older version of OSX to accomplish this task. So far, Yosemite has been a bust for me with all the other problems I have experienced. I might as well go back to 10.9.5 on all my Macs until Apple gets their act together with Yosemite.Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?
If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library -
Burning mp3 cds using AAC files
How can I burn mp3 cds using AAC files from iTunes?
You can't burn MP3 CDs from MP4 (AAC) files. You have to convert the AAC files in in iTunes to MP3 before you can burn them to MP3 disc.
You can use iTunes to convert any copy protection free songs in your library another format. When you convert a song in iTunes it will be converted to the format that you have set to import your CDs in. Converting creates a second copy of the song in the format you have chosen which gives you the opportunity to either keep or delete the original. If you are using iTunes 8 go to iTunes>Preferences>General and click on Import Settings, change your option to MP3 for example. Go back to your library and highlight the songs you want to convert and go to the Advanced menu at the top of your iTunes window and choose "Create MP3 version": iTunes: How to convert a song to a different file format
One exception to this are standard copy protected songs (if you haven't upgraded to iTunes Plus versions) purchased from the iTunes Music Store which can't be directly converted due to the DRM (Digital Rights Management) copy protection. However you can burn these to an Audio CD which will work like any regular CD. -
How to transfer the tables from one file group to another file group in SQL 2008.?
Hello all,
I have few issues regarding the transfer of the tables from one file group to another file group in SQL 2008 and also How can we backup
and restore the particular database based on file group level.
Let’s say I have a tables stored within the different FG. such as
Tables
File group
Dimension tables
Primary
Fact tables
FG1
FG2…
zzz_tables
DEFAULT_FG
dim.table1 DEFAULT_FG
dim.table2 DEFAULT_FG
Here all I want to transfer the dim.table1 ,dim.table2 from DEFAULT_FG to the Primary File
group .So is there simple methods for transfer the dim.table1,2 from one FG to another .I have tried somewhat but I couldn’t get the exact way .So if someone have better idea please share your knowledge that would be really appreciated.
Secondly after moving those dim.table1 ,dim.table2 from DEFAULT_FG to Primary ,All I want to backup and restore the database only containing the Primary and FG1,FG2… not
a DEFAULT_FG.Is it possible or not.?
Hope to hear from the one who knows better approach for this kind of task .Your simple help will be much appreciated.
Regards,
Anil MaharjanWell after all my full day research on this topic had paid off, I finally got the solution and am so happy to research on these things. It makes
us feel really happy after all our research and hard work doesn't goes as waste.
Finally I got what I am looking for and want to make sure that I am able to transfer the tables from DEFAULT_FG to another FG without tables
having clustered index on that tables .
With the help of the link below I finally got my solution where Roberto’s coded store procedure simply works for this.
Really thanks to him for his great post and thanks to all for your response and your valuable time.
http://gallery.technet.microsoft.com/scriptcenter/c1da9334-2885-468c-a374-775da60f256f
Regards,
Anil Maharjan -
Reading the data from excel file which is in application server.
Hi,
Iam trying to read the data from excel file which is in application server.
I tried using the function module ALSM_EXCEL_TO_INTERNAL_TABLE. But it didn't work.
I tried just reading using open data set and read data set it is giving junk characters.
Please suggest me if you have any solution.
Best Regards,
Brahma ReddyHi Narendra,
Please see the below code I have written
OPEN DATASET pa_sfile for INPUT in text mode ENCODING DEFAULT MESSAGE wf_mess.
CHECK sy-subrc = 0.
DO.
READ DATASET pa_sfile INTO wf_string.
IF sy-subrc <> 0.
EXIT.
else.
split wf_string at wl_# into wf_field1 wf_field2 wa_upload-field3
wa_upload-field4 wa_upload-field5 wa_upload-field6 wa_upload-field7 wa_upload-field8
wa_upload-field9 wa_upload-field10 wa_upload-field11 wa_upload-field12 wa_upload-field13
wa_upload-field14 wa_upload-field15 wa_upload-field16 wa_upload-field17 wa_upload-field18
wa_upload-field19 wa_upload-field20 wa_upload-field21 wa_upload-field22 wa_upload-field23
wa_upload-field24 wa_upload-field25 wa_upload-field26 wa_upload-field27 wa_upload-field28
wa_upload-field29 wa_upload-field30 wa_upload-field31 wa_upload-field32 wa_upload-field33
wa_upload-field34 wa_upload-field35 wa_upload-field36 .
wa_upload-field1 = wf_field1.
wa_upload-field2 = wf_field2.
append wa_upload to int_upload.
clear wa_upload.
ENDIF.
ENDDO.
CLOSE DATASET pa_sfile.
Please note Iam using ECC5.0 and it is not allowing me to declare wl_# as x as in your code.
Also if Iam using text mode I should use extension encoding etc.( Where as not in your case).
Please suggest me any other way.
Thanks for your help,
Brahma Reddy -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to extract the mailboxes from *.edb files
I am using windows 2007, SP2, 64 bit operating system and exchange server 2007 on top it.
I have migrated my users to a third party solution.
Unfortunately, during this migration, there are 2 uses who seems to have lost few e-mails (nearly 2 weeks e-mails ..not sure how that happened but the backup PST does not have it hence it was not uploaded to the third party provider ...)
How do i get the pst from .edb file so I can put it again to synch with the new platform ??Hello,
You may do a single mailbox recovery by referring to:
How to recover or restore a single mailbox
http://support.microsoft.com/kb/813337
Thanks,
Simon -
Had to reload window Vista need to reload stored cds from Windowsold file after reload
had to reload window Vista need to reload stored cds from Windowsold file
had to reload my computer after a HD failure. I reloaded everything along with current version of Itunes.
Consider Windows 7 has its own built in data and system backup, and now Windows 7 (Dev) has a better hourly backup/archive versions, and there are 3rd party programs....
you have the CDs still?
Prosoft Data Rescue 3 for PC and Macs (demo) can scan a drive for recovery.
Bad blocks, or issues with directory and such? out right hard drive failure?
And then there are network storage if you have more than one computer, or use HomeGroup (Win 7) to access files across LAN.
My Music Media Library is never on the boot drive, I wish the iPod backup wasnt as well.
For an excellent utility to clone Windows OS drive2drive, I recommend and use Paragon HDM 2011 Suite, used as needed and weekly so I always have a system clone that I can pop in and boot from, no image, no restore needed (set the BIOS or hot key). Wouldn't be w/o and $49. Takes 10 minutes for 50GB Windows OS.
http://www.paragon-software.com/home/hdm-personal/ -
Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.
Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
KumarWilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar -
Deleting the data from logical file/unix file
Hi all.
I need to delete the all the data from logical file (application server file/unix file).But I dont want to delete the logical file ( only data in the logical file should be deleted, i.e making file empty)
Thanks in advance.
Cheers.
samiHi Sami,
Refer thsi document https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4d7aeb7d-0c01-0010-fa8a-a4a8e8968a93.
Regards,
Flavya -
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
How to display the content from a file stored in database
when i am trying to display the content from a file which stored in database on oracle report 10g
data are displaying as following. please help me to display the data in readable format
<HTML LANG="en-US" DIR="LTR">
<!-- Generated: 1/11/2006, postxslt.pl [1012] v1
Source: amsug304286.xml
File: amsug304286.htm
Context: nil
Tiers: ALWAYS
Pretrans: YES
Label: Release 12 -->
<HEAD>
<!-- $Header: amsug304286.htm 120.4 2006/11/01 20:57:29 appldev noship $ -->
<!--BOLOC ug1_OMPO1010302_TTL--><TITLE>Product Overview (ORACLE MARKETING)</TITLE><!--EOLOC ug1_OMPO1010302_TTL-->
<LINK REL="stylesheet" HREF="../fnd/iHelp.css">
</HEAD>
<BODY BGCOLOR="#F8F8F8">
<A NAME="T304286"></A><A NAME="ProdOve"></A>
<CENTER><H2><!--BOLOC ug1_OMPO1010302--><B>Product Overview</B><!--EOLOC ug1_OMPO1010302--></H2></CENTER>
<p><!--BOLOC ug1_OMPO1010304-->Oracle Marketing drives profit, not just responses, by intelligently marketing to the total customer/prospect base. By leveraging a single repository of customer information, you can better target and personalize your campaigns, and refine them in real time with powerful analytical tools.<!--EOLOC ug1_OMPO1010304--></p>
<p><!--BOLOC ug1_OMPO1006611-->With tools necessary to automate the planning, budgeting, execution, and tracking of your marketing initiatives, Oracle Marketing provides you with:<!--EOLOC ug1_OMPO1006611--></p>
<ul>
<li>
<p><!--BOLOC ug1_OMPO1006612--><B>Customer Insight</B> - With sophisticated customer management and list generation, Oracle Marketing enables you to quickly generate target lists and segments using an intuitive user interface. The easy to use Natural Query Language Builder (NLQB) lets you query for customers or prospects using a natural language while hiding data complexity; fatigue management ensures that you do not over-contact the same customers with marketing messages; and predictive analytics helps you predict customer behavior that you can leverage to produce significant increases in marketing return on investments (ROI).<!--EOLOC ug1_OMPO1006612--></p>
</li>
<li>
ls.<!--EOLOC ug1_OMPO1010304--></p>
<p><!--BOLOC ug1_OMPO1006611-->With tools necessary to automate the planning, budgeting, execution, and tracking of your marketing initiatives, Oracle Marketing provides you with:<!--EOLOC ug1_OMPO1006611--></p>
<ul>
<li>
<p><!--BOLOC ug1_OMPO1006612--><B>Customer Insight</B> - With sophisticated customer management and list generation, Oracle Marketing enables you to quickly generate target lists and segments using an intuitive user interface. The easy to use Natural Query Language Builder (NLQB) lets you query for customers or prospects using a natural language while hiding data complexity; fatigue management ensures that you do not over-contact the same customers with marketing messages; and predictive analytics helps you predict customer behavior that you can leverage to produce significant increases in marketing return on investments (ROI).<!--EOLOC ug1_OMPO1006612--></p>
</li>
<li>
<p><!--BOLOC ug1_OMPO1006613--><B>Sales Alignment</B> - Oracle Marketing's leads management helps you compile and distribute viable leads so that sales professionals can follow up valuable opportunities and not just contact interactions. Additionally, support for distributing proposals and marketing material drive speedy and consistent setups and collaboration of best practices.<!--EOLOC ug1_OMPO1006613--></p>
</li>
<li>
<p><!--BOLOC ug1_OMPO1006614--><B>Marketing Insight</B> - While Oracle Marketing Home page reports and Daily Business Intelligence (DBI) for Marketing and Sales provide aggregated management level information in almost real time, operational metrics help in tracking the effectiveness of individual marketing activities.<!--EOLOC ug1_OMPO1006614--></p>
</li></ul>
</BODY>
</HTML>
<!-- Q6z5Ntkiuhw&JhsLdhtX.cg&Zp4q0b3A9f.&RQwJ4twK3pA (signum appsdocopis 1162406236 2673 Wed Nov 1 10:37:16 2006) -->Hi,
you can try to use the:
<b>ConsumerTreeListPreview</b>
layout for KM navigation ivew (or customize to your own).
This layout shows a folder tree on the left, a document list on the right. When you click on a document from the list it shows the contents of the file on the bottom of the iview.
Hope this helps,
Romano
Maybe you are looking for
-
my macpro with 4 hard drives and connected to a 23" cinema display. i use my computer twice a day, once in the morning for about 2 hours then when I get home from work for another 2 hours. should i leave my computer on? put it to sleep? just looking
-
I'm trying to watch a webinar that is using flash. Is there a way to watch this webinar on my iPad 2?
-
It's a disaster! (all new CC2014 apps installed and updated) premiere pro CC2014 ; trying to export media to media enconder CC2014 which hangs all the time. Working on the latest mbp i7. When one timeline is rendering in media encoder nothing can be
-
'Personnel Number' field in BP
Hello, Please tell me the table in which the field "Personnel Number" of "Identification Tab" in BP gets stored. Many thanks. Will award points. Regards, Rizwana
-
Oracle Portal with Intermedia Searching
I had installed Oracle9iAS Portal and Intermedia. Then, I created a simple Content Area and added some items there, like Word Documents, HTML files, etc. Now, when I try to find a word using the default Portlet "Basic Search" and it returns "no data