Business Area in TRM-TM-Money Market

Hi,
We have a requirement to use Business Area for every posting to GL account.  We have proposed to use TRM for maintenance of Fixed-term Deposits.  When I try to post from Treasury using TBB1, system is not allowing to post as there is no Business Area in the GL to be posted.  In treasury we do not have BA field available for input.
Can someone help me on this.
thanks in advance for the help.
Mahesh

Hi Mahesh,
You can assign a business area to the account assignment reference through which G/L account is picked up for posting.  You can also assign a cost center to it.
Regards
Ravi

Similar Messages

  • + & - TM for 2 diffferent Depts in 1 Business Area

    Hi Experts,
    I have 1 scenario where in i have to maintain Bothe Positive & Negative Time Management.
    The Org.Stracture as follows->
    Comp Code- Company A under this Pers.Area- Location KK under this Pers.Subarea-KP.
    Now Pers Subare KP has business areas as-KP1
    In Business Area KP1- 1dept-KPM is Marketing  & KPA is HR.
    Dept KPM-Marketing has Positive Time management
    Dept KPA-HR has Negative Time Management .
    Can this be possible.
    Please guide me how the time management groupings has to be done.

    Hi,
    Like your employees configuration and assigning are fully different for the + TM Employees and - TM employees. that means Two TM configurations 1 for + TM and one for - TM.
    Time schedules, working day schedules, Breaks, etc are different for these two. while generating time schedules you have to divide these two why because there work schedules are different and may be holidays also vary.
    first you have to create a rough sketch and configure according to that. if you give some clarification that pa psa eg esg and assigning config then easy to understand and able to give suggestion.

  • Treasury Money Markets- Operative Valuation Area and Parallel Valuation Are

    Hello Folks
    I have a problem I am trying to fix in Treasury Money Markets. The guys that created the fixed term deposits in Money markets did not create them in the Operative Valuation area. They created them in the Parallel Valuation area and went ahead to initialize it, they deleted the operative valuation area. Now the problem came in when new transactions were created. In the process of creation they asked for the operative Valuation area i.e. the new transactions being created. This was then created, but now the problem comes in settling and posting of the old transactions that have matured. These do not exist in the Operative Valuation area.
    I can’t post anything using TBB1 for the old transactions that were created without the operative valuation area, the system dumps and from the analysis I can see that it’s the lack of the operative valuation area. For the new transactions being created, a payment request cannot be generated for transactions requiring one.
    How can I make sure that the Transactions in the Parallel valuation area also exist in the operative valuation area? Has anyone ever had this problem? Any suggestions on how I can go about solving this problem?
    Regards
    Valentine

    Hi,
    I assume the valuation area you are asking about is in transaction manager component only.  Technically all valuation areas are same in the sense that they have the same functionality.  But from a functional stand point, every valuation area is determined based on either different accounting principles or different valuation needs.  For e.g. one valuation area can be for your local GAAP while one can be for IFRS.  It all depends on the business requirements whether you need multiple valuation areas at all or you can use one itself.
    By default 1 valuation area is required and hence 001 will be active and this will be your operative valuation area.  Any other valuation are you define will be parallel valuation area.  Now if you dont want other valuation areas, then you need not create them.  In your system, if you have been using 004 as for lets say IFRS and after upgrading you can configure 001 according to IFRS itself if you dont want VA according to any other GAAP.
    Regards,
    Ravi

  • Default Business Area determination from CRM TRM

    Dear All,
    We have CRM-TPM and ECC in the current set up. System is  deriving Business Area into FI and COPA for CRM posting where we are not using business area for reporting?
    Can anybody help us?
    Regds,
    Purna

    Hi....
    Check this one also
    Transaction OKB9 (default account assignment to maintained the link for cost center and business area)
    Enter the Company Code and Cost Element
    Cocd      Cost elem.      Acct assignment detail
    Enter the details as per business area/valuation area
    BA     Cost ctr
    If it there remove it .... but make sure before make changes....
    Regards

  • In SAP Money market , I would like to find list of Tables  pertaining to Money Market & Securities

    HI Experts ,
    Subject :- SAP MONEY MARKET & SECURITIES.
    Basically I want to find Profit Center, Business Area , Main G/L ( TKORR) when  I know Transaction number ( Loan number) and Portfolio .
    I know thru SPRO ,
    FSCM>> TRM >> Transaction Manager >>G Settings>> Accounting >> Link to other accoutnig components >>Additional account assignements >>
    Define Derivation of Addiotional account assignemnts .This gives which BA & PC is mapped to which PORTFOLIO .
    I need to know the above  through  Tables ...
    Any input will be thank ful
    regds,
    Swaroop Gujarathi

    hi all ,
    I found the same .
    thanks

  • Reclassification of Borrowing / Investment in Money Market

    Hi SAP Experrts,
    We are using TRM system and I have the following scenario
    We have borrowing loan 10,000,000/- loan and we paid installment repayment every month 100,000/- and interest. We have this borrowing display long term and posting separate G/L of LTB.
    In balance sheet if repayment less than 1 year this balance showing in short term bowwowing and post in separate G/L and other balance showing in Loan term borrowing. In this case 1,200,000/- display in STB and 8,800,000/- in LTB.
    This is month end activity.
    Next month we paid 100,000/- and 1,200,000/- display in STB and 8,700,000/- in LTB. In last year we showing 1,200,000/- in STB.
    This case  in Investment side also.
    Thanks,
    Vishal Patel

    Hi,
    We enter  Clear Units/Nominals - DBT_U001 and Post Units/Nominals - DBT_U002 in Assign Update Types for Valuation Class Transfer. We run TPM15M for security only system display position but system display following message.
    1 transfers not carried out due to errors
    Message no. TPM_TRTF103
    And we run TPM15M for Money market transaction system transfer total outstanding amount, as per note 1515125 installment repayments wise change valuation class. How to change valuation class installment repayment wise?
    Regards,
    Vishal Patel

  • How to change money market maturity date in TR modul

    Dear Friends,
    I want to change the maturity date for money market transaction. Currently the due date is 29.09.2008 but I want to change it to 15.04.2008. When I change it using tcode TS02, an error massage
    "End of term is before end of calculation period of posted flow."
    How can I fix this problem? anyone can help?
    Norliza

    Hi,
    I hope you are required to reverse all posted (fixed flows) flows dated prior to the new term end date.
    thanks,

  • How to post gain/loss on exchange rate from Money Market

    Dear Sap Expert,
         I need your kindly help about posting gain/loss in Treasury with money market type.
         My scenario use the product type 55A  - Interest rate instrument  and transaciton type = 200 borrowing in Foreign currency transaction as the transaction as belows,
    Date                   Flow Type     Name                       Amouunt      currency     Exchange rate         Amt.Local currency
    19.10.2011         1105             Borrowing               10,000            USD               30.00                       300,000
    30.10.2011         1120             Final repayment       10,000            USD               30.00                      300,000
        For the normally the system generate current exchange rate from the configuration .After that I try to change the Exchange rate manually in Flow type 1120 from 30.00 to be 31.00  then  the Amt.in Local currency changed to be 310,000 and the flow type gain/loss from exchange rate does not generate ( In Loan Management I can do it)
        On 19.10.2011 I use t-code TBB1 to post the borrowing transaction (1105)
        On 30.10.2011 I use T-code TBB1 to post the Payment transaction but the gain/loss account does not happen.
        For my question Can the system post  document for flow tpe 1120 (on 30.10.2011) with exchange rate realized gain/Loss automatically? or how should I do to make it correctly.
    Thank you very much for your suggestion.
    PK

    Hi,
    your customizing for Derived Business Transactions requires DBT_B flows in your PMP in order to post realized gains/losses.
    Regards,
    Lorenz

  • Business area and profit center

    plz can anyone explain me what is the diffrence between business area and profit center.

    Business Area is a type of organizational unit structure, primarily used to facilitate external segment reporting across company codes, covering the company's main areas of operation. Business Areas run across company codes. The relationship is n:n. Business Area is part of FI. 
    Profit Center is also a type of organization unit structure, used for management/ internal controlling purposes. Dividing the company up into profit centers allows one to analyze areas of responsibility and to delegate responsibility to decentralized units, thus treating them as “companies within the company”. The profit centers also run across company codes. The relationship is n:n. Profit Center Accounting is part of Enterprise Controlling.
    While it may look apprantly that both Business Area and Profit Center do the same kind of analysis and reporting, with in SAP internal architecture they are kept in different modules and different tables.
    SAP Note 321190 provides the difference betwen Business Area and Profit Center, which you can get from SAP Service Market place.
    SAP has maintained Business Area from 4.6B onwards, while there are enhancements happening in Profit Center side.

  • Generate Withholding tax on interest Money Market instrument

    How can I automatically generate a flow for withholding tax on the interest of a money market instrument (55B)? Would the tax be posted on a different (from the counterparty) business partner (tax office) or just an open item on a GL account?

    Hi ,
    As limitation with treasury module, we cant post direct to vendor Therefore you have to use derive flowfor generation of tds flow which can be post as a GL open item but this will not help you to run the With-holding tax cycle.
    If you not required TDS challan, then above mention can help you but if you want to run complete TDS cycle then  firstly you have to post the Gross Interest in Interest Payable and then with the help of FB01 transfer the Gross Interest to Vendor, while passing this entry system will give pop-up of with-holding tax assign in vendor after chossing the right section , system will automatic pass accounting entry of TDS.
    Regards
    Narinder Pal Verma

  • Business Area (URGENT)

    Guru's
    How System pick up Businee Area With out Account Assainment.
    Now my Question is my user created PO with out account assainment.After he done MIGO.then if see the accoutning document business area not updating.
    is there any configaration?
    how systen pickup business area.
    Thanks & Regards
    Ram

    Hi,
    In confugiration IMG -Enterprise Structure -  Defin - Financial Accounting - Define bussiness area
    2. IMG - Enterprise Structure -Assignment - Financial Accounting - Define bussiness area
    hi
    see the below link for config steps for business area.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBUSI/FIBUSI.pdf
    Business Area. The system posts costs and revenue according to the business area. The business area can be equivalent to the:
    sales area (if the accounts are to be posted according to sales)
    plant/division (if the accounts are to be posted according to products)
    The business area is defined in Customizing for Sales.
    o Business area. A unit in an enterprise, grouping product and market combinations as homogeneously as possible for the purpose of developing unified business policy.
    o Financial Accounting (FI). A business area is an organizational unit within financial accounting which represents a separate area of operations or responsibilities within an organization. Financial accounting transactions can be allocated to a specific business area.

  • Using current dimmensions for new business areas with coarser granularity

    Hi,
    I have a time dimension which has month, quarter, semester and year attributes.
    I am creating a new business area in which each fact refers to a quarter (we have no monthly data). In this case I am considering two options:
    1) Using an attribute in the fact table that points to the quarter field in the dimension table (or creating a quarter code in the dimension table, and pointing to that code -there is already month-year code as primary key-).
    2) Creating a new dimension table with just quarter, semester and year.
    What should be best? Is there another option?
    Thanks for yout help.
    Fernando.

    Hi Sam,
    I am not sure wheher memory is really a serious constraint anymore. Consider this:
    a) the price of memory today is pretty much at the price point of hard disks in the year 2000 (at least according to a study I saw). In 2000 we happily ran business systems without being worried about the cost of hard disks ... and that is where we are today with RAM. Sure, disks also became much cheaper, as did flash memory, but the speed benefits of RAM are so superior that it is worth investing in it.
    b) there are already 1 TB RAM blades available, and I think there is now a 2 TB RAM blade on the market (I heard about Samsung having one, and others may have one too)
    c) we indeed routinely achieve compression factors of 10-20 x. It all depends much on how full the table field is, and how homogeneous the content. A field "Currency" compresses great, a field with a "UUID (Universally Unique Identifier)" does not.
    d) customers typically only want to access this and last year's business data (and keep the rest just for reference)
    So I think that it is quite possible to have the active business data even of the largest SAP customers completely in memory, at a reasonable price point. Sure, more expensive than disk ... but who cares about disk anymore (apart for backup)?
    Kind regards, Oliver

  • Parameters in Business Areas?

    Hi all,
    I am running into a problem in terms of report maintenence. I have about 50 reports built off of each business area (about 10 business areas). I was wondering if it is possible to put a parameter in a business area, so the default values can be changed? (I know you can put conditions in a business area, but we are using user prompted parameters). If this is impossible, does anyone have any suggestions on cutting down time on updating reports? Any input is greatly appreciated, thanks!

    Hi all
    I believe there is an enhancement request in for this to be introduced as part of Disocverer 11i. Yes 11i is planned! That release is part of the overall Fusion release which is slated at this time for the end of 2007. However, don't be at all surprised if this gets pushed back into 2008. Fusion is such a big project for Oracle for many reasons so this is one that they won't rush to market.
    In the meantime though you have to follow the workaround described in this thread and elsewhere. One further thing that you may want to consider is the creation of one or more template workbooks that have the basic parameters pre-defined. These workbooks could be owned by a central user, a library owner perhaps, and then shared with the other users. Once worked on the user would use Save As to save a copy of the report.
    Best wishes
    Michael

  • Business area in GRN doc

    Hi All,
    When we create a PO & when GRN is made against the same & posted, business area is not getting captured . This will lead to auditing queries. Please suggest.
    Thanks

    Hi Ravi,
    Business area is an organizational unit that corresponds to a specific business segment or area of responsibility in a company.
    In T.code:OX03 - Creation of new Business Area and In T.code:OMJ7 and link plant and division to your business area.
    Business Area. The system posts costs and revenue according to the business area. The business area can be equivalent to the:
    sales area (if the accounts are to be posted according to sales)
    plant/division (if the accounts are to be posted according to products)
    The business area is defined in Customizing for Sales.
    o Business area. A unit in an enterprise, grouping product and market combinations as homogeneously as possible for the purpose of developing unified business policy.
    o Financial Accounting (FI). A business area is an organizational unit within financial accounting which represents a separate area of operations or responsibilities within an organization. Financial accounting transactions can be allocated to a specific business area.
    For more check the links:
    http://www.sap-basis-abap.com/sapfi003.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBUSI/FIBUSI.pdf
    http://www.sap-img.com/sap-sd/sd-questions-on-corporate-structure.htm
    Regards,
    Nani.

  • Amortization in money market in Ehp3

    As per IFRS requirment, we would like to do amortisation in money market. We understand that the same is available from Ehp 3. We have activated the relevnat business function. We would like to know what settings and steps needs to be done so that amortisation is done in money market.
    Regards
    S.RADHAKRISHNAN

    Hi Kalyan,
      This create offer is supported for money market only for fixed deposits and for forex spot and forward. This is just to get an overview of all the bids. The direct contract creation from this is just a flexibility, and as pointed out by you, will be taken in entirety.
      But then we always have TM02, to change the fixed term contract, to 5M in your business case. Only then the deal should be settled.
      As pointed out, the validation message comes, of you have to create another partial contract from the same offer screen.
    The idea of clubbing offers simply is to give an overview. I am glad, you have a customer using it.
    Best regards!
    Sandip

Maybe you are looking for