Business area not appearing in mateial document

Hi,
I have created a new plant. and have made all assignment.
while doing  testing  by making PO and doing MIGO.
Business area is not appearing in material document posting.
( more over in my existing plants at the time of MIGO no account assignment tab appears.but  for this new plant account assignment tab appears though i have not assigned any thing in account asignment in PO)
Please help.
Regards,
Vijay

Hi,
Use T.code:OMJ7 and link plant and division to your business area.
Active Business area in T.code: OBC4 , in material management segment in ur field status group.Also Consult with your FICO team.
Regards,
Biju K

Similar Messages

  • Business area not appearing in Accounting document of 543's materail doc

    Hello ,
    We have created new plant CN06 (and assigend to Company code CN06) by copying existing plant CN03 (assigned to Company code CN03). Business area CN06 was defined and assigned to plant CN06 and valuation area. When we do normal GR document business area appears in material document but when we are doing GR for sub contracting (posting key 81) with movement type 543 Business area doesnt appear in the material doc .
    In cancellation of Subcontracting material document for plant CN06(Movement type 544) Business area appears properly . We are unable to analyse the issue.
    We have checked field status through RM07CUFA program , there wn't be any mismatch.  Please required your help.
    Regards
    Mahesh Naik

    Hello ,
    We have checked
    please check the for the sales area have u assigned rule (2 or 1) or not in t-code OVF2.----- Rule assigned is -1
    please check business area is assigned to plant & division in t-code OVF0----correct assignment is there
    please check assignment of business area to sales area OVF1.--correct assignment is there .
    Still we are facing problem.
    Regards
    Mahesh Naik

  • Business area not appearing in GR of Subcontracting (Movement type 543)

    Dear Gurus
    We have created new plant B  (and assigend to Company code B) by copying existing plant A (assigned to Company code A).  Business area B was defined and assigned to plant B and valuation area. When we do normal GR document business area appears in material document but when we are  doing GR for sub contracting (posting key 81) with movement type 543 Business area doesnt appear in the material doc .
    In cancellation of Subcontracting material document for plant B (Movement type 544) Business area appears properly .  We are unable to analyse the issue. Request your help.
    Appreciate your early response
    Regards
    Arunjit C

    Hi,
    I assume you know the GL account that should be posted when doing the GR for subcontrating with movement type 543. Try SA38 report RM07CUFA which compares the movement type field status and the GL account field status.
    Maybe business area is suppressed in one of the field status and cannot be posted to?
    Best regards, Christian

  • Business area not appearing against VAT entry in Accounting doc for Invoice

    Dear All,
    We have configured Business areas,
    When we post an invoice with multiple line items and open the Accounting document for this invoice we find that Business area is visible against Freight Amount and the ,Sales  A/c but that no business area is appearing against the Vat payable amount in the accounting doc.
    Why so?
    what should we do so that system determines the business area against the VAT Account also.
    Regards,
    Avinash Gyale

    This could be due to two reasons
    1)  If one invoice contains multiple business areas, only blank space will appear in accounting document.  To avoid this, invoice split should happen based on business area.  Invoice split can be done through VOFM data transfer - billing document.
    2)  If a particular G/L Account is assigned in multiple Business Areas, this problem will come and you need to apply Substitution Exit RGGBS000
    thanks
    G. Lakshmipathi

  • Business area not populated in Accounting Document

    Gurus
    Business Area showing in Billing document, item detail tab but not populated in Accounting Document BSEG/GSBER.
    We have upgraded 4.5b to ECC6.
    regards
    imdad

    Hi:
               This happens in instances if one invoice contains multiple business areas, then only blank space will appear in accounting document for business areas. If this is the case then invoice split should happen based on business area. Invoice split can be done through VOFM data transfer - billing document.
    However if invoice contains only one Business Area then please check in IMG --> Sales and Distribution --> Basic Function --> Account Assignment / costing --> Business Area Account Assignment....check  whether you have assigned the  Business Area to Sales Area to Rule "1".
    Regards

  • I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
    Accepting that it works fine with another iPad, I suggest trying the following:
    1. Restart the non-working iPad
    2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
    iTunes 10.3 is now available, and that may make a difference.

  • Line items are not appearing in F-32

    Dear All,
    There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
    Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
    Regards,
    Rupa.

    hi,
    as seen from above mails,
    entries are existing in BSID table
    entries are passed as part of period end closing entries
    entry passed in month end and reversed in next month
    proposed sol
    1. check the mode of passing the  entry in tcode
    if tcode is coming from FBS1 the entries will not appear in F-32
    if 1 entry in FBS1 and other entry in F-32 then automatic reversal  entries were not passed.
    there was manual entry.
    that is the reason 1 entry in FBS1 and other in F-32.
    Thxs,
    GB

  • MIRO - Business Area not getting updated in Vendor Line item

    Hello friends,
    I am posting Vendor invoice in MIRO transaction.
    After Posting if i see the financial document generated,
    Business area has not got updated in Vendor Line item.
    What could be the problem ?
    Please help me out.
    Hari Prasath

    Hi Kale,
    Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
    On the other hand, have a look to the note and kba below:
    41294 - Business area in customer/vendor item
    Kba 1727802 - Business area not getting populated in sales/ purchase tax

  • In case of Factory sales, ECS values alone are not appearing

    Hi friends,
                  In case of Factory sales, ECS values alone are not appearing in the sale order
    and billing document even after maintaining excise rates in J1ID as 2% and condition
    record as 100% for both JECS and JECX condition types, finally I checked with tax
    code but still I am facing same problem. But same 2% values are appearing in J1IIN
    screen.
    Please help me out in solving this problem.
    Thanks and regards,
    Swamy H P

    Dear Swamy
    Ensure the following in your pricing procedure, for condition type JECS.
    -  The "From-To" step number should be the step number of JEX2. 
    -  The Calculation Type should be 366
    -  For JEX2, Calculation Type 353 and Account Key EXD are maintained
    thanks
    G. Lakshmipathi

  • Custom fields are not appearing in BP

    Hi Friends,
    My requirement is to add a new fields in Business partner(TCode:BP). For this I have created a new tab using Business data tool set by following every step. I have regenerated the screens also(using Tcode:BUSP). But after executing the transaction I am able to see the tab but not the fields. Fields are not appearing in the tab. What might be the reason?? Kindly clarify me.
    Regards,
    Steve

    Hi,
    For this purposr you have to use EEWB enhancements to add field to your new tab page.
    Regards,
    Amol Tambe.
    SAP CRM Technical Consultant.

  • Business Area not coming in FS10N layout.

    Dear SAP Friends,
    I am working in a client where "Document Splitting" was activated on the basis of "Business Area" from the 1st August,2008. In this client their is four business areas. When I am getting the balance sheet as per Business Area in F.01 every GL shown the amount as per business area & also a some of amount is shown under the not assigned head. Amount under the not assigned is total of document of having no business area.
    Now my client wants that all not assigned amount should be distributed as per the business area & not assigned amount will come to zero.The field of business area is "GSBER".
    Now for that I am testing it on development. I have selected on document having no business area and updated the table "BSEG" for filed "GSBER" for that business area manually through ABAP. When I am seeing the same  document under FB03 the system shows the Business Area correctly which I have given in the table. But when I see the General Ledger balance in FS10N (In layout selected business area column) the same document does not give business area in that business area column. But when I select it for details it shown the business area in that document.
    Now my issue is why this is happening ? or is their any another way to do this ?
    Because i have to update all of documents of before 1st, August 2008 with no business area .
    Please give any solution ASAP & for helpful answer points will be surely awarded.
    Thanks & Regards in advance  
    Sandeep
    Edited by: Sandeep on Dec 6, 2008 11:34 AM

    Hi,
    Touching a cluster table like BSEG thru ABAP is a tricky thing.  You would need to work out all linkages to other tables for the data you are touching, would suggest a where used for field business area and update all other tables relevant to the data, like BSI* and BSA*.
    For FS10N, the data is not read from BSEG but rather from the totals tables like GLT0.
    Cheers

  • FOC items with bill rate as "0" are not appearing in project invoice

    Customer has a unique requirement of billing resources working on the project for free due to business reasons.
    The issue is that the FOC items with bill rate as "0" are not appearing when the invoice is generated.
    Please let me know if any one has come across this kind of a requirement and please share if you have any workaround.

    Hi
    You may try setting the bill rate for those cases as 0.01.
    That way the items will be included in the invoice, but not affect dramatically the amount billed to customer.
    Dina

  • Business area not picking up for substitution...

    Hi
    I have created susbstitution for GL account..for substituting business area for GL account....(tax GL account
    Tax line item is automatically created in document.....i want business area to be pickep up for the same.
    We want substitution create for Business area updating ;- When Document has 4 line item at the time of TAX and TDS line item the Business area not update, MIRO Document also not update the Business area.
    Please reply
    thanks

    Dear Vijay,
    Please kindly read the SAP note number 199886     Business area in tax line
    In the value-added tax line items, the field "Business area" is NEITHER
    automatically filled NOR can you enter a value manually.
    Postings to VAT accounts must be made WITHOUT business area. The reason
    for this is that the field "Business area" does NOT exist in the tax
    data. Therefore,the advance return for tax on sales/purchases can also
    only generate postings WITHOUT business area and these postings must
    correspond exactly to the original tax postings in your account
    assignments. Otherwise, the tax accounts would have steadily increasing
    business area balances.
    Unfortunately I must inform you that the business area is not available
    for substitution because it can cause inconsistences in AM,CO and MM
    modules.
    Substituting the B.A.field is a modification to the standard SAP
    system. To make the business area field substitutable you must have
    written an ABAP to update table GB01 for the GSBER field, this is
    all explained in SAP note 42615.
    I hope this helps.
    Mauri

  • Business Area not showing during MIGO line item process

    Hi,
    We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
    If we create another MIGO document with other PO, BA is showing...
    What should be the issue...

    Hi,
    is this an account assigned PO ? Please check the PO document for the acct asst Tab .
    whather the BA is populated .?
    Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
    Regards,

  • Word styles not appearing in Print Document Appearance dialog

    My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
    The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
    I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
    Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
    I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
    Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
    Thanks again,
    John

    Peter,
    I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
    Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
    Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
    Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
    Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
    John
    From: Peter Grainge [email protected]
    Sent: Thursday, October 13, 2011 8:47 AM
    To: John Dawson
    Subject: Word styles not appearing in Print Document Appearance dialog
    Re: Word styles not appearing in Print Document Appearance dialog
    created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

Maybe you are looking for