Business content Info object

Hi all,
       Can any one please tell me :
If we activate & install the info objects in the business content, then where in the Modelling the info objects are stored?

HI,
I think there is Inconsistency in RSDIOBCIOBJ table .
Run RSDG_IOBC_REORG . With Parameters
I_OBJVERS = A
I_PROGRESS =
I_IOBJTP = *
I_ALL_IOBJ = X
I_T_IOBJNM =
I_BYPASS_BUFFER =
NOTE - 573421  Will help you .
Assign Points if it is helpful in all threads u posted ....way to say thanks
Regards,
Vijay

Similar Messages

  • Business content info object installation:

    Hai gurus,
    when i install info object ( omaterial) got an error as:
    Version A of DataStore object 0RF_DS02 does not exist
    Message no. RSDODSO102

    Hi Sampath,
    When you try to install any of the Business content, there are some important settings that you should check. This includes,
    *Grouping - What are the related objects that should be collected along with your target
    *Install - How do you want the installation to be done
    *Collection mode - Whether collection should be automatic or not
    Please check what type of grouping you have used while you tried to install the specified object.
    (NOTE 1: I believe that if you use grouping as "dataflow before"  or "only neccessary objects" you will not get this error for Infoobject installation
    NOTE 2: This error might have shown since this DSO 0RF_DS02 would have not been installed from BI content yet and would have been collected when you collected the related objects of the 0material with "dataflow after or before and after")
    Hope it helps.
    Warm Regards,
    Preethi R.

  • How to install business content Info Objects..

    Hello all.
    I am trying to do some BW extraction in our sandbox. Unfortunately I dont know how to install BC infoobjects. I have searched thru this forum but am still not fully sure. I have the source system client connected to BI. I replicated the datasources and see a ton of datasources under the UNASSIGNED NODES tree.
    Eg: How do I install the InfoObject 0Material. Can somone tell me steps..I think I can figure out the rest after that.
    Thanks in advance.

    Hi
    The Data Warehousing Workbench for installing BI Content has three navigation windows:
    In the left-hand window you determine the view of the objects in the middle area of the screen.
    In the middle window, you select the objects that you want to activate.
    In the right-hand window, you make the settings for installing the BI Content. The right-hand window also contains an overview of the objects you have selected, and it is here that you start installation of BI Content.
    In the Data Warehousing Workbench, you use the Navigation Window On/Off pushbutton in the toolbar to display or hide the left-hand navigation window. The rest of this section assumes that the left-hand navigation window is displayed.
    2. Assign Relevant Source Systems
    If you want to assign a source system, select the Source System Assignment function. The Choose Source System by Default? dialog box appears.
    Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
    Only ever select the source systems that you really need, otherwise you may have to wait unnecessarily when objects are collected.
    The assignment of the source system is only relevant for source-system dependent objects (such as transfer rules, file DataSources, and InfoPackages). If more than one source system is available, only those objects assigned to the specified source system are collected ready for the transfer. Objects that have not been assigned to the specified source systems are ignored.
    For more information about the special features inherent in activating process chains that can reference source-system dependent objects, see the Customer Content documentation, under Process Chains and Process Variants.
    If you do not select a source system, all the source systems are assigned automatically. You can change your selection later using the Source System Assignment function.
    3. Group Objects To Be Included, Determine Mode of Collection for Objects
    Make the settings you require from the following selection lists on the right-hand side of the screen:
    Grouping
    Choose the objects that you want the system to include. The groupings combine the objects from a particular area. You have the following options:
    Only Necessary Objects (default setting)
    Data Flow Before
    Data Flow Afterwards
    Data Flow Before and Afterwards
    If you change the default setting (Only Necessary Objects), the new setting becomes the default setting for your user.
    The grouping selection has an impact on system performance during BI Content installation. For more information, see View of Objects and Object-Specific Recommendations.
    Collection Mode
    Select how you want to collect the objects:
    Collect Automatically (default setting): The data is collected when the objects are selected.
    Start Manual Collection: The data is only collected when you choose Collect Dependent Objects.
    Set the collection mode to Start Manual Collection. You can select all the objects without having to wait.
    4. Determine View of Objects
    In the left-hand navigation window, specify how you want the objects to be displayed. For more information, see View of Objects and Object-Specific Recommendations.
    5. Transfer the Objects to Collected Objects
    In the central area of the screen, select the objects that you want to install, and drag and drop them into the right-hand Collected Objects area of the screen.
    The Find Object function allows you to use strings of characters (for example, 0CUST) or wild card searches (for example, 0CUST_*B) to search for objects.
    Input help is available for every type of object: Double-click on the Select Objects icon in the tree structure of the corresponding object type to display the Input Help for Metadata screen. Select the required objects. Choose Transfer Selection.
    If you implement BI Service API Releases lower than 7.0 in the source system, you have to install the active version of the BI Content DataSources in the source system and replicate them in the BI system before you can use them for transferring data into BI. For more information, see Installing BI Content DataSources and Metadata Upload for SAP Systems.
    In the Collected Objects area of the screen, the system displays the selected objects and all dependent objects. Collected objects are stored by default in the repository cache. This reduces the time it takes to access these objects when you want to use them again.
    When you transfer objects into the Collected Objectsarea of the screen, these objects are also added to the tree structure of the corresponding object type in the central area of the screen and stored for your user. This personal object list can be called up each time the program is restarted.
    If you want to remove objects from your personal list, select the objects that you want to remove and choose the Remove Object from Display option from the context menu or click on the icon.
    Objects that are listed in several tree structures can only be changed in the place where they first appear. All additional instances of these objects are grayed out so you cannot modify them.
    6. Check Settings for Collected Objects
    Check the following columns in the Collected Objects area of the screen:
    Install
    The following BI Content objects are highlighted in this column by default:
    Objects that are being transferred for the first time. There is not an active version of these objects in the system.
    BI Content objects that have been redelivered in a new version. These objects can be identified by the Content time stamp in the corresponding object tables.
    When setting this indicator, check whether the checkbox refers to a folder of an individual object: If the checkbox refers to a folder, the indicator is set for all the objects that belong to this folder. If the checkbox refers to an individual object, the indicator is set for a single object and the indicators for the other objects in the folder are not changed. The same applies if you deselect this indicator.
    In the context menu, the following options are available for the installation:
    a. Install All Below
    The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Install.
    b. Do Not Install All Below
    The Install indicators are deselected for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy.
    Match (X) or Copy
    If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
    With the most important object types, the active version and the SAP delivery version can be matched.
    Note that the InfoSource TRCS supports the match, but the 3.x InfoSource ISTD does not.
    From a technical point of view, the SAP delivery version (D version) is matched against the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
    When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. If you are sure that the object will be used in the same way after you install BI Content, you can perform an automatic match for those properties. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be copied from the delivery version.
    Assign points if useful.
    Thanks & Regards,
    Hari

  • Install query with business content - missing objects

    Hi All,
    I am trying to install a query for the purchasing data cube - 'Values: Purchase order - delivery - invoice'.  When I try to install I get an error message that one of the directory objects is missing (Restricted figure - Invoice Value.  Please help with the process on how to install the missing object.
    Kind regards,
    Cheryl Adamonis

    Hi Cheryl,
    You can change the collection mode to automatic and the grouping to in data flow before. This should give you all the needed CKF, RKF etc. But please be aware that this collects info objects, providers and all other objects in the data flow before the query!
    Alternatively you can just choose the RKF from the query elements and install this with your query (search for the technical name given in the error). You might as well install all the other RKF's for the info provider when you are doing this. You can do a search on the info provider name and see all the available RKF's  (E.g. 0PUR_C01).
    BR
    Stefan

  • Error InfoObject inactive while activation of Business content for cube

    I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
    Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM

    Hi Sriniva and All,
    I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
    EDI: Partner profile not available 1
    Source system E33CLNT003: No authorization for remote activation of DataSources
    Source system T90CLNT090 is inactive
    Object '0CUSTOMER_ATTR                BM_GIS_DAT' (ISMP) of type 'Transfer
    Rules' is not a
    I hope to hearing from someone soon !
    -- Armstrong Kwakye

  • Issue in Hierarchy data upload from R/3 for info object Product Hierarchy.

    Hi,
    I am trying to upload the hierarchy data from R/3 system for Info Object Product Hierarchy.
    Insted of business content info objects (0PRODH, 0PRODH1, 0PRODH2, 0PRODH3, 0PRODH4, 0PRODH5, 0PRODH6), we are using customized objects (ZPRODH, ZPRODH1, ZPRODH2, ZPRODH3, ZPRODH4, ZPRODH5, ZPRODH6).
    In transfer rules the mapped is as specified below
    Fields        =>  Info Objects.
    0ZPRODH1 => ZPRODH1
    0ZPRODH2 => ZPRODH2
    0ZPRODH3 => ZPRODH3
    0ZPRODH4 => ZPRODH4
    0ZPRODH5 => ZPRODH5
    0ZPRODH6 => ZPRODH6
    Now, when I schedule the Info Package, it is ending with an errors
    "Node characteristic 0PRODH1 is not entered as hierarchy charactersitic for ZPRODH"
    "Node characteristic 0PRODH2 is not entered as hierarchy charactersitic for ZPRODH"
    "Node characteristic 0PRODH3 is not entered as hierarchy charactersitic for ZPRODH"
    "Node characteristic 0PRODH4 is not entered as hierarchy charactersitic for ZPRODH"
    "Node characteristic 0PRODH5 is not entered as hierarchy charactersitic for ZPRODH"
    "Node characteristic 0PRODH6 is not entered as hierarchy charactersitic for ZPRODH".
    when i tried to load by flat file, there is no issues. But, flat file loading is not allowed for us.
    Please let me know any possible solution to handle this issue.
    Thanks.
    Regards,
    Patil.

    Hi voodi,
    Insted of using the info object 0PRODH1, we should use customized info object ZPRODH1 which I added already in the external characteristic in Hierarchy.
    Regards,
    Patil.

  • Business content infoobjects are still in verion 2.x & 3.x

    Hi all,
    We have upgraded our system to BI 7.0 from BW 3.5, when we check customer created infoobjects thy look fine,but business content info objects show us version 2.x and 3.x, Why is it so.do we need to do some migration for this.We used the latest version of business content available.
    Thanq all.
    Regards,
    Robert

    As sanity check ,ar you looking at the business content which was already activated before upgrade??
    try to activate the business content from fresh now ,plain vanilla and see what it gets you.
    Hope it Helps
    Chetan
    @CP..

  • Error message in Business Content Installation

    Dear All,
    I am getting one error message while install some objects in FI through Business Content.
    Object '0GL_ACCOUNT_T011_HIER_EC1' (ISTS) of type 'Transfer structure' is not available in version 'A
    I have search around but I dont find any related to it.
    Please suggest.
    Thanks

    Hi,
    Exactly what your trying to activate?
    info object or data source?
    Use grouping option as - only necessary object and drag required object form middle pane to right side pane.
    try to install it. If it shows any dependences then those first need to install.
    above mentioned name is GL Account master data source hierarchy.
    Thanks

  • Please help on Business content

    Hi Gurus,
    I have read so many answers and papers giving the steps how to transfer,replicate and extract business content, that is all fine and very helpful.  I apologise for very long topic, but I think answers to this would help loads of learners like and everyone would be grateful to you(all).
    But not found a details such as for e.g. for cube 0FIAP_C03
    Question: Does this business content has InfoObjects,ODS, InfoCube and BEx queries are already defined in BW?  Do we need to activate them and start reporting on the queries?
    R/3 Side:
    1. Transfer Data sources 0FI_AP_3(Vendors: Line Items) and 0FI_AP_4(Vendors: Line Items with Delta) from R/3 from RSA5.  Does this mean that the Data sources are created/activated in R/3?
    BW Side:
    2. AWB --> Source Systems --> Select Source System ---> Right click ---> Replicate Data Sources.   When I click on + sign next to the DS, this shows already assigned infosource.  When I click on - sign next to the DS, this asks an infosource to be assigned.  What does the +/- sign means there? What does the 'TICK MARK' means there?
    3. AWB ---> Business Content ---> Install --> Do we get a chance here to activate InfoObjects, Transfer Rules,Update rules, Infocube and BEx query?  Once we install here, then only the cube 0FIAP_C03 is going to appear in InfoProvider and then for BEx query designer?
    4. AWB -
    > Info Sources -
    > My Application Component ---> Assign InfoSource (We already did that in Step2, what does this mean here?) -> Assign Data Source->  Create InfoPackage -
    > Schedule.  One (0FI_AP_3) DataSource is for line Items and another for Line Items Delta (0FI_AP_4).  Do we need to schedule both at the same time? Is the DS 0FI_AP_3 not for Init Delta?  Is the DS 0FI_AP_4 not for Delta?
    Please can you send me any documents of this detail to [email protected]. 
    I appreciate all your patience to read and answer my questions here. Is there any training or personal attention available in the UK? 
    Thanks again.
    Chitra.

    HI,
    Question: Does this business content has InfoObjects,ODS, InfoCube and BEx queries are already defined in BW? Do we need to activate them and start reporting on the queries?
    Answer:Business content has infoobject, ods, infocube, queries in "D" version.
    SAP delivers the BI Content objects in a new D Version.
    Before you can work with BI Content objects, you have to convert them from the SAP delivery version (D version) into the active version (A version).
    R/3 Side:
    1. Transfer Data sources 0FI_AP_3(Vendors: Line Items) and 0FI_AP_4(Vendors: Line Items with Delta) from R/3 from RSA5. Does this mean that the Data sources are created/activated in R/3?:
    Like BI business content. predefined objects in R/3 (datasources ) are maintained in RSA5 and Activated datasources are available in RSA6
    BW Side:
    2. AWB --> Source Systems --> Select Source System ---> Right click ---> Replicate Data Sources. When I click on + sign next to the DS, this shows already assigned infosource. When I click on - sign next to the DS, this asks an infosource to be assigned. What does the +/- sign means there? What does the 'TICK MARK' means there?
    3. AWB ---> Business Content ---> Install --> Do we get a chance here to activate InfoObjects, Transfer Rules,Update rules, Infocube and BEx query? Once we install here, then only the cube 0FIAP_C03 is going to appear in InfoProvider and then for BEx query designer?
    Ans: Once install it it will be available in Active version accroding to the component it has been assigned(SD or CRM). otherwise it will be in Unassigned Node.
    4. AWB -
    > Info Sources -
    > My Application Component ---> Assign InfoSource (We already did that in Step2, what does this mean here?) -> Assign Data Source-> Create InfoPackage -
    > Schedule. One (0FI_AP_3) DataSource is for line Items and another for Line Items Delta (0FI_AP_4). Do we need to schedule both at the same time? Is the DS 0FI_AP_3 not for Init Delta? Is the DS 0FI_AP_4 not for Delta?
    Regards,
    Senthil

  • Business Content Issue

    Hi BWers,
        We are not able to find business content info cubes other than BW statistics.
        How to get other Business COntent Cubes related to HR, SD, MM,FI.
        we are in mysaperp.
       Can anyone give ideas.
      Thanks,
      Bhima.

    hi robert
    BW is integrated with Mysap erp.
    And we are not able to find the business content apart from BW statistics.
    Can anyone suggest how to get this objects into BW business content so that we can activate and load the data.
    Bhima

  • Business content infosource

    Hi All,
    How do I do a comparison between the active infosource (2LIS_03_BF) vs. the business content infosource, or just to view the business content info source.  I am interested in both the communication structure and the transfer rule.  The current active infosource in the system was from release 2.x prior ro our system upgrade to release 3.5.  I need to implement the new 0IC_C03 inventory cube.  The old 2LIS_03_BF infosource was customized to load a different info cube. 
    Any help will be greatly appreciated.  I will assign points for those who are spending their time to help!!
    Thank you.
    Andrew

    Ravi,
    I looked at help.sap.com and did not find the fields for the communication structure and transfer rule for info source 2LIS_03_BF.   Can you point me to the right direction? 
    Also, I was hoping that there are some SAP utilities where it would show the differences between the active version vs. the business content version for the infosource.  Such as the one available in the info object display. 
    Thanks,
    Andrew

  • Info Object lengths Desperately needed.

    Dear Gurus,
    Please dont think this question as a simple question.  I desperately need your inputs.
    What are the lengths of info objects according to SAP name space and Customer name spaces.  I can see some Info objects starting with 0 having as long as 11 characters.  And when i try to create one i am able to give only 9 characters.  And when I searched in RSD1 for object lengths there i can see some as long as 14 characters eg:  /BA1/C35DATDOC
    Please tell me clearly what is the maximum length an info object can have.   I tried to read the documentation from the following link.  but I am not able to understand things clearly.
    http://aiokeh.wdf.sap.corp:50000/SAPIKS2/contentShow.sap?_CLASS=IWB_EXTHLP&TMP_IWB_TASK=DISPLAY&_LOIO=53EC2C37B995184890C6D8BA5B668A86&_SLOIO=E3E60138FEDE083DE10000009B38F8CF&RELEASE=700&LANGUAGE=EN&_SEQNUM=14&_SCLASS=IWB_STRUCT
    Kindly help me
    Regards
    Mohan
    Message was edited by:
            mohan kumar

    Hi Mohan,
    SAP-delivery (Business Content) namespace:
    ·        Objects beginning with 0
    ·        Generated objects in the DDIC beginning with /BI0/
    Customer namespace:
    ·        Objects beginning with A-Z
    ·        Generated objects in the DDIC beginning with /BIC/
    Partner-specific namespace and customer-specific namespace:
    ·        Object begins with /XYZ/ (example)
    Special SAP namespaces for generated objects:
    ·        The prefixes 1, 2, 3, 4, 6, 7, 8 are required in BW for DataSources and InfoSources in special SAP applications.
    ·        The prefix 9A is required for the SAP APO application.
    When you create your own objects, therefore, give them technical names that start with a letter.
    The maximum permitted length for a name varies from object to object. Typically, 9 to 11 letters can be used.

  • Problem with Business Content install in ECC5 IDES

    Hi,
    I am having tough time installing business content.
    After installing ECC5 IDES, I am trying to install Business Content in BW ( Client 800). 
    In SBIW, (under Business Content DataSources), I did Transfer Application Component Hierarchy.
    Then I transfered few DataSiurces ( 0MATERIAL_ATTR)
    Then in BW, I did "Replicate Data Sources". I see all the Datasources in "Data Source Overview"
    But When I try to install Business Conetent ( rsa1>> Business Content >> Select Object Types >> InfoObjects>> Select Objects>> Double click ), I couldn't find any InfoObjects from source system. I tried the same for InfoCubes as well..
    Am I missing anything?? I appreciate your help.
    Thanks
    Samba

    ECC will have content for 'source system' ie datasource and extractors. On your BW system you need to have the business content add on available before you can see such objects there (infoobjects, cubes).
    BW system (whether in the same IDES or another system) needs to have this BW Content add-on. It is one additional step, just having the BW system (without this addon) will not give you what you are looking for.
    BW content add-on is typically one set of transport files, installed using SAINT transaction. My guess is your system doesn't have it.

  • Bex Property of Info object doesn't work when Infoset is Used

    Hi,
      When I use Business partner info object ( example 0CRM_SALESP or 0BP_ACTIVIT etc) in a query build directly on a ODS(DSO)  or infocube, the Bex setting "Query Def Filter Value Selection = Only Values in Info provider" defined in the 'Business Explorer" tab of the infoobject, works perfectly. This means that if the info object has 1 Million records in the master data table, but in the transaction data only 100 are involved, when you define a varialble restriction for the info object , in the selection screen the F4 will only show these 100 data as help.
      Although this feature works fine when the query is directly developed ON THE INFO PROVIDER. However when I define a infoset on the same ODS and define  a similar query, the F4 value shows all the data from the master data table instead of the ocurance in the transaction data( info provider)..
      Is there any way , I can get over this issue.
      Thanks
    Arunava

    Hi,
      I guess, I couldn't ecplain the issue properly earlier.
    What I am saying that even though I have the proper setting in the BEX tab ("Query Def Filter Value Selection = Only Values in Info provider")  for the info object , It behaves differently if the query is defined directly on ODS then on the infoset which is built on top of the ODS.
    When the query is build on the ODS the setting works fine
    However when the query is defined on the Infoset, the F4 help get the value from the info object master data.
    My question is , why this two different behaviour for the same info object? And how do I over conme this to get the same bahavious in info set as of the ODS.
    Thanks
    Arunava

  • How to identify the best match Business Content CUBEs

    Hi Experts
    I got the reporting requirments from the user...
    How can i identify is there any suitable business content bw objects (Data Source,DSO,Cube..etc) avaliable that i can use to meet the requirment or
    alteast find a nearst match so that i can enhance
    Please advise me how to start
    Thanks

    Hi,
    Once you collected requirements then you can take a look at the business content site for the datasources or cubes etc.which fit with your requirements.If you tell your requirements then we can suggest you what to use or you can start taking a look at  the link below.
    http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    Regards.

Maybe you are looking for