Business System Update

I have made a change to my business system in the SLD but I do not see the changes in the Integration Directory... I have tried CPACache Refresh but this has made no difference.
Basically I changed the Client and Logical system name of the business system and I want to see the changes in my integration Directory...
Like with SWCV's when you make a change you can simply reimport the SWCV and you will see all the changes is there a similar process with Business systems?

Hi Ricardo,
In ID goto Environment --> clear SLD data cache...
and then double click the Business system in ID
goto sevices --> adapter specific identifiers and click compare with SLD in change mode..
Regards,
sridhar
<b>Thats fine and you are welcome</b>
Message was edited by:
sridhar reddy kondam

Similar Messages

Logical system not updated in the business system adapter specific data par

Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

Missing business systems in model configurator

Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, Trevor

Dear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K

R195 System Update - Scheduled to go live April 10th, 2014

On April 10th, 2014 we are going to push live a Business Catalyst system update.
While our next release main focus will be on Open Platform and the new Partner Program which aim to transform the product into an extensible platform providing partners all the tolls they need to build a successful web agency franchise, it will also include several updates and bug fixes targeting improvements in the core product. You can read below the list of issues fixed with the current release. For more details on the Open Platform and new Partner Program, check the Business Catalyst blog.
Issues fixed by April release
Issue #
Description
3706713
Fixed the Reset password link for e-mail accounts
3714499
Fixed an issue preventing admin users from accessing the passphrase for the offline payments when the Verify Offline Password dialog is shown
3713924
Fixed a display issue on retina monitors for the insert tag, toggle borders, show module toolbox buttons in the Campaign Content Editor
3713617
SBO Users with passwords not changed in last 90 days can't access Admin if user landing page is a CRM page or they come to Admin following a CRM link from an email
3715074
Fix product bulk actions (enable, disable, add, remove tag)
3729193
(Open Platform) Updated app loader to properly handle redirects to relative paths
3723982
(Open Platform) Fixed a typo in the application authorization screen
3722296
(Open Platform) Fixed an app loader issues which was throwing and error if appKey was starting with a non-alpha character
3714358
Fixed an issue in the Partner Portal causing the datacenter ID to be displayed instead of the lastname
3713858
Fixed an issue in the MyDetails page causing an unknown error when user was trying update personal information
3725808
(Open Platform) Fixed localization for "title" and "href" attributes in menu.json files which prevented localized strings to be displayed when Admin language was changed
3736972
(Open Platform) Fixed an issue with menu rendering "visible" attribute (in menu.json) which did not work as expected on sub-menu entries
3737096
(Open Platform) menu.json content updates are not reflected right away on Admin menu reload (cached info does not get invalidated)
Updated web app insert/update web forms to save false values for checkboxes that are not checked; previously the behavior was to leave the field empty which was inconsistent with the behavior of the admin user interface creating or updating web app items.
We are no longer recording visits from IPs that have been blacklisted
Fixed and issue on Chrome for Mac which was generating an error when users tried to upload PSD files
Fixed and issue preventing users to upload PNG files in the Edit Image dialog
(Open Platform) Excluded apps backed files from sitemap module and site search results
We hope you will enjoy this release and look forward to your feedback.
The Business Catalyst team

Hi Liam, I was using that new dropdown section but the Meta Description wasn't saving. I did 10 yesterday and today some were missing which I'd definitely done yesterday. (Maybe it's something to do with onesaas which exports and reimports the products to sync with our accounting and inventory system?)
To be on the safe side I'm now copying the data from meta description into a custom 1 field in case it vanished again i can recopy and paste it back and not loose hours of rewriting etc.
Plus I found the tag to show the more options-keywords on the pages too.
So what i've learnt (in case anyone else is as lost as me..)
Don't touch product page properties. (I'm going to go through and delete all mine)
On the product large layout page have:
<html>
    <head>
        <title>{tag_productmetatitle}</title>
        <meta content="{tag_productmetadescription}" name="description" />
        <meta content="{tag_tags}" name="keywords" />
        <meta content="{tag_productmetatitle}" property="og:title" />
        <meta content="{tag_productmetadescription}" property="og:description" />
    </head>
(Does that sound good Liam?)

Why did my hardrive get wiped clean when I did a simple system update?

On May 4th, 2010 my eMac, which is running Mac OS X (10.4.11) did it's automatic system update. I bought this eMac it was a refurb from eBay. I never had a single problem, it ran perfectly fine when I had tested it out, everything was great. I transferred some photos and music from my old Windows computer to the "new" eMac, and some of the music was newer and needed a system update to work properly. I thought nothing of it so I went to www.apple.com and looked for the update, found it, and started it. I had went ahead and stepped away while it updated to pass the time. Once I had gotten back I went ahead and restarted the computer like you must do with every update, when I had logged back in, my hard drive was wiped clean. At the time I was a little perturbed to say the least, but I passed it off as it not having an update in so long that it had just, more or less, reinstalled the new system update. Once again I passed it off not thinking anything of it, never had another problem out of it at all. I had put a many of programs such as Adobe Photoshop CS3, Adobe Audition, Dreamweaber, Garageband (full version), djay v3, and I had even JUST put Logic Studio on it, and many others. After putting, more or less, my entire livelihood on the eMac, (I create website designs, various ads, freelance photography and videography, and a verity of other logos, designs, insignia, emblems, ect...) it did another automatic update, now my ENTIRE hard drive is wiped clean. I no longer have possession of my software discs due to someone stealing them along with all my audio cds, and dvds. I don't have the money to spend on new software, (altogether my software added up to just over $2.5k) and now I am already feeling the effects. What can I do? Will Apple even help?

As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

CIM_ERR_ALREADY_EXISTS: Error while creating Business System

Hi,
I am getting following error while creating Business System in SLD, the Technical System is already created from RZ70 transaction in the IDES system
Error Creating business system: CIM_ERR_ALREADY_EXISTS: Instance already exists://inbbssun01/sld/active:SAP_LogicalALESystem.CreattionClassName="SAP_LogicalALESystem", Name = "LSIDES800.SystemName.800.SystemName.IDS.SystemNumber.0020224902.SystemHome.idesecc"
Thanks,
RP

Hi,
This error means that a business system with this name(or associated with this technical system) is already there in SLD.
You need to check that before you try creating it (might be someone else have created it before)
Updated
If you have created and deleted a business system and then trying to recreate one then you need to delete all the instance of it from Content Management (in SLD)
Regards
Suraj
Edited by: S.R.Suraj on Nov 9, 2009 12:34 AM

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

SLD Export / import Technical and Business systems

Dear all,
I am new to SLD administration.
We have task to update the local SLD on the Production PI system PPI ( Target ) with the business systems ZEC, ZSC from the Production Master SLD on Production solution manager system
PSM ( source ) using Export/Import on the necessary technical and business systems.
Please confirm whether i am following correct steps :
Go to SLD Administration on PPI target system
ALL Instances
Instances by Class
Model
( which one of this option need to be selected , please let me know ?? )
Go to SLD Administration on PSM source system.
select Export button ->
Select business systems one by one and perform Export which will create .ZIP file
at local machine.
Go to SLD Administration on PPI target system
select Import button ->
Select Export ZIP file which created in previous steps from PSM and provide location from desktop
Start Import button ( only if you get Continue import option )
Please let me know if above procedure is correct for business systems
if yes then what need to be done for Technical system ??...do they require Export/import also ?
If yes when i go to technical system option i get Export option disabled...but same way when i go to
business systems option i get Export button enable and able to perform the export.
Do i need to only Export / Import business systems ?
Plese help me.
Regards,
RR

Manoj,
It seems entries are added manually .... should we remove and run Import for the same ...
or just try to overwrite .... in case of overwrite option ( as we have open OSS message ) SAP has suggested through OSS message that If you end up with problems when trying to overwrite, then the PPI SLD is broken and will have to be re-built because someone made a manual change to it and got the GUIDs out of synch with the master.
I do not understand if target system PPI SLD gets broken during overwriting operation as mentioned by SAP ... whats is the way / steps / procedure to Re-build SLD .
In rebuilt - process do i need to Import ( Export -> Export lines -> ALL ) the export backup created before start of this activity ? please let me know SLD rebuilt steps and about Remove - reimport issue.
Appreciate you time on this. thanks in advance.

Business systems are not reflecting in Int. Directory

Hi All,
I am getting a problem regarding business systems. Any business system which i have in SLD is not showing up in the ID when I am doing the configuration.
Somebody suggested SLDCHECK...
When I run this transaction I get the message that "Connection with SLD does not work". Is it related ?
Many Thanks,
Mona.

Hi,
The Integration server is not connected to the SLD.
Please check if you have done the following
1. Updated transaction SLDAPICUST with SLD server details information
2. Create TCP/IP connection in LCRSAPRFC and SAPSLDAPI in the trnsaction SM59
3. Create the same in the visual admin.
All the details are given in the SAP XI configuration Guide.
Regards
Vijaya

Integration directory : select IDOC interface for WAS business system

Hi,
While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
In the SLD this component is correctly listed for that WAS .
If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
"Message Interface does not exist in any software components installed on this business system "
Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
Any ideas
( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
rgds
Dirk

Hi Bavesh,
Yes, It's correctly listed. I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
rgds
Dirk

Technical system - business system doubt

Hi,
I am facing a strange problem. I had a logical system maintained in my technical system. When I process idocs the idoc has a partner number field filled, and it is the logical system name that I maintain in the technical system. That was giving me an error saying that the partner number doesn't exist in the system and the idocs were going into 56 status.
I later on removed the logical system name from the technical system. But still when I process idocs, through XI the logical system name/partner number in the idoc, is the previous one maintained in the technical system. Is it not supposed to change now since I've removed it from the technical system. I even refreshed and reimported the objects. It still doesn't work.
Regards,
Vijay

HI,
GOto your Business system in the Integration directory and select it.
ON the right hand side Goto Service--> Adapter specific identifiers.
If this is the older one, then goto change mode and get it sync with the middle button. If it's still not getting updated,
then goto Integration Builder page> administration Integration directory>Cache overview>SLD Cache.
Just refresh the Business system again.
Regards
Vijaya

Message interface not exist in any software components on business system

Hi Experts,
In development-environment we have an interface (SAP->XI->3rd party system) with a conditional receiver determination (based upon a fieldvalue in RFC that comes from SAP, "CONTROL_RECEIPE_DOWNLOAD"). This functions properly in development.
After transport to production environment this structure is not known when I try to use it in the Integration Directory when creating a conditional receiver determination. Double-click on the interface does result in the startup of the integration builder, but the interface itself can not be found. The following error-message appears:
"Error message Message interface does not exist in any software components installed on this business system"
All design-objects have been put into production and in Integration Builder the structure is available. In IR it is not...
In development In the business system of the sending SAP system, I can see the interface. In production, I don't see any interfaces at the business system....so this might be the problem but how can I add an interface manually to a business system?
Can anybody please help?
Thanks in advance
William

Hi William,
One more thing. In Production, check the technical system of source. SWCV in which you have developed your interface, should be installed on the source system. If this SWCV is not in list of your installed products & SWCV then add it. Update the business sytem in ID again & it will work. I guess you have done a typo by saying that objects are not available in IR but in Integration builder its avaliable.
Regards
Sushil

Business system VS application(java/ABAP)

can u differentiate business system VS application(java/ABAP) in terms of proxy???

Hi,
ABAP Proxy :
1. With ABAP proxy generation function it will be possible to generate ABAP proxy objects to an SAP system from an interface description in the SAP Exchange Infrastructure Integration Repository.
2. ABAP proxy objects can only be generated for SAP systems that are based on SAP Web Application Server 6.40.
If you use ABAP Proxy , you can reduce the overhead calling the function again and again.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Re: JDBC Sender select/update problem
Java Proxy:
1. JAVA proxy is used for J2EE based systems communicating with XI for sending or processing msgs in those J2EE based systems
2.It allows java applications to interact directly to Integration server with avoiding the configurations for the special adapters
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab - How To Work with XI 3.0 Java Proxies
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9- Java Proxies and SAP XI - The Inside Story, Part 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d - Java Proxies and SAP XI - The Inside Story, Part 2
Regards,
Kumar.
P.S: Reward Points if Helpful!!!!!

Diff between Business service and Business System?

HI Experts,
Pls let me know wht is the difference between business service and business system??
when we will have to go for business service and when for business system??
thnx in advance..
New XI

Hi,
Difference between Business Service and Business System are :
1) Business sytem require all details like login user id
password require to create but in case of business service
log in details does not require..
2) A Business System is purely for SAP-Systems and
Business Service for Non-SAP systems
3) Business service refers to any business applications where
as the business system is defined in SLD(System Landscape
Directory)
4) When we have full details of application system the we are
going to use the business system and it is created in the
SLD so we dont have authorization to change the business
system name.
When we have partial details or no details of Technical
system then we r going to use the business service. it is
created in the ID. we can see and change it.
5) A Business system is something that physically exists
For example, if u want to download a file from a system
ABC, by using file adapter and then want to update the
content of this file into r/3 database by using RFc,then
the system abc and the r/3 will be ur business systems
i.e. they physically exists. Business Systems are
configured in SLD.
Business service is mostly usedin B2B Scenario (cross-
component),where you don't know the Business System of your
partner. In other words business Service will be used only
for those partners which do not have a physical landscape
set up . Business servces do not have an entry in SLD.
6) A Business Service is an Abstract Unit(which is not in
System Landscape Directory) addressing Senders and
Receivers of Messages.
Physicals systems which use their communication channels
and routing rules to communicate with other systems are
called as Application Systems OR physical systems.
7) In simple when u going for A2A integration then we define
our Technical systems are Business system. If we r going
for B2B integration then we dont know the complete
information about the other end Business Landscape so, we
configure it as a Business Services. Business system are
created at SLD. Where as a Business Services are created at
Integration Directory.
8) Business systems:
These are logical senders or receivers that exchange
messages by using the Integration Server and that are
entered in the System Landscape Directory.
The business systems in the System Landscape Directory
relate to a system landscape. The business systems of
business partners are therefore not entered in the System
Landscape Directory. To be able to address such business
partners logically, use communication components in the
Integration Directory. A business system is a way of
specifying a communication component in the Integration
Directory more precisely (business system component).
Hope this will hwlp u..
Regds,
Pinangshuk.

Business System Update

Similar Messages

Maybe you are looking for