Button Group with Command SAVE_DATA execute with ENTER

Hello,
I created a Button Group with Command SAVE_DATA and execute it with ENTER. I use it in a Webtemplate.
Most of the time the Button is working in proper way.
Sometimes it happens that the Enter doesn't work and don't save data. To press the Button to Save data is always working.
Any ideas why?
Thanks a lot.
Kind Regards
Doris

Hello,
thank you for your answers. I checked the Notes for the Cache problems. I think this is not valid for my Template because the data are correctly saved if I press the Save Button after the Enter is not working.
The strange thing is the behavior that it is sometimes not working and not allways. Also it is not possible to place the Save Button outside the planning cells. But I will keep this in my mind.
Any other ideas?
Thanks a lot.
Kind Regards
Doris

Similar Messages

Radio Button group with images stored as BLOB files in database

Hey all!
I have radio button group, my idea is that radio button's LOV must display images, I mean BLOB files stored in a table.
How can I do this?

Hello Ken,
I asked similar question in the past, and I believe the answer is still the same.
Select List as an option of a Radio Group
In your case, I think you can use a select list with added functionality, like "Select List with Branch to Page" or "Select list with Submit", or you can just attach an onChange event (JavaScript) to each select list. The effect should be similar to a radio group as soon as the user select one item from any of the select lists, you can fire some action, based on the select list value.
Hope this can help,
Arie.

Streamlining the code for the button group with individual links and rollover imgs

I am looking for a solution to streamline the code for the array of 20+ buttons located inside the scroll pane.
I know I can make an array if all the buttons would have a unified code executable change, i.e. they would become larger and brighter.
My problem is that each button represents an product image in the lights off stage, then of rollover it is a lights on stage so I have to import two images in the on and off stage and play around with the opacity.
Additional problem is that each button has to ling to a different label.
My question is: is it possible to unify the code if buttons have that much individuality or I have to make each one of them as in the example below.
// makes a hand cursor appear over a mc acting as a button for all the buttons inside the scrollpnaeBckgrnd_mc.scrollpaneBckgrnd_btns_mc.
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.buttonMode = true;
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.useHandCursor = true;
///////////////INDIVIDUAL BUTTONS
          MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLyte _btn.FloraLyte_ON.alpha = 0;
                    var FloraLyte_btn_Tween:TweenLite = TweenLite.to(MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.F loraLyte_btn.FloraLyte_ON, .5, {alpha:1, paused:true});
                    MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLyte_btn.addEventListener(MouseEvent.ROLL_OVER, overHandler_FloraLyte_btn);
                    MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLyte_btn.addEventListener(MouseEvent.ROLL_OUT, outHandler_FloraLyte_btn);
        MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLyte_btn. addEventListener(MouseEvent.CLICK, onClick_floralytePopUp);
                  function onClick_floralytePopUp(event:MouseEvent) :void {
                                        gotoAndPlay("floralytepp");
function overHandler_FloraLyte_btn(e:MouseEvent):void{
         FloraLyte_btn_Tween.play();
         trace("you rolled over me");
function outHandler_FloraLyte_btn(e:MouseEvent):void{
         FloraLyte_btn_Tween.reverse();
         trace("you rolled off me");
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLytell_btn .FloraLytell_ON.alpha = 0;
                    var myTween:TweenLite = TweenLite.to(MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.F loraLytell_btn.FloraLytell_ON, .5, {alpha:1, paused:true});
                    MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLytell_btn.addEventListener(MouseEvent.ROLL_OVER, overHandler);
                    MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLytell_btn.addEventListener(MouseEvent.ROLL_OUT, outHandler);
        MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLytell_bt n.addEventListener(MouseEvent.CLICK, onClick_floralytellPopUp);
                  function onClick_floralytellPopUp(event:MouseEvent) :void {
                                        gotoAndPlay("floralyte2pp");
          function overHandler(e:MouseEvent):void{
         myTween.play();
         trace("you rolled over me");
          function outHandler(e:MouseEvent):void{
         myTween.reverse();
         trace("you rolled off me");

as ned suggested, plan your flow and code into it. here is one example:
var buttonArray = [someButton, someOtherButton, aDifferentButton];
for(var i = 0; i < buttonArray.length; i++){
     //get reference to county movieclip
     var mc = buttonArray[i];
     //then add listeners
     mc.addEventListener(MouseEvent.ROLL_OVER, overMe);
function overMe(e:MouseEvent){
     var mc = e.target;
     switch(mc){
          case: someButton:
                   someOtherButton:   doThis();
                                                 break;
          case: aDifferentButton:     doThat();
                                                 break;
          default:                            //do nothing;
                                                 break;
function doThis(){
     trace("do this")
function doThat(){
     trace("do that")

Variable pop-up using Button Group in WAD

Hi experts,
I've created a button group in WAD to execute a 'Copy' function developed in IP.
This copy function has the following variables:
Order From:
Order To:
Version From:
Version To:
This button group was created as it should referencing my copy function, with a dataprovider of type filter, and under 'Behavior' I have flagged the ' Display variable screen' field.
So when I click on this button, it should give me a pop-up screen for me to enter those variable values.
The problem is, it's not giving me this pop-up screen. Does anyone know why? Or if I've missed something.
thanks
Edited by: Ehab Mansour on Feb 28, 2008 10:48 AM

Hi Maykan,
I will give that a try, and let you know how it worked out.
By the way, are you aware of any 'WAD' specific documentation that provied details and more WAD capabilities?
thanks

JRadioButton's and Button Groups

I have a button group with some radio buttons, but i don't want any actions to be done untill a JButton is pressed. In my actionPreformed for the JButton is there a way to make a switch statment where the different cases are the different radio button's that might be pressed. i'm not sure if i'm saying it clearly so here is an outline of what i wasnt to do.
switch ( myButtonGroup.radioButtonSelected() )
case radioButton1:
blah blah blah
case radioButton2:
blah blah
and so on.
thanks for any help.

HI,
If I understand your question correctly,
what you can do is if/else
if(buttonGroup.isSelected(radioButton1.getModel()))
else if(buttonGroup.isSelected(radioButton2.getModel()))
Hope this helps

Repeat last command with enter key in dbx

I am using dbx 7.7 on Solaris 10 (Sun Studio 12.1). Is it possible to configure dbx so that pressing the <enter> key will always repeat the previos command? for instance, if i do one "next" command, i want consequent <enter> key-presses to do "next", until i explicitly execute a different command.
Thanks,
Yael

yaelfrommer wrote:
Hello Jean,
Thanks for this advice, i started working with dbxtool and it's very nice.
2 questions:
1. The Function keys (F7, F8, etc.) don't work, any idea what could be the problem?There is a bug in the dbx cmdio window where it ignores F-key. It doesn't even have
a decent context menu. You should be able to get F7 etc working by moving the
focus elsewhere, like the editor window.
2. In the default .dbxrc file there's a line "button ignore step up" to "add `step up' button to GUI", but no button was added. Is there anything else i should do to make this work?
These are really old. (we should remove them from the default .dbxrc!)
The current way to add a button is via Debug->NewDbxButton
Thanks,
Yael

Object-group with network-object containing an IP address range

Hello,
Does the ASA treat an object-group with a network-object containing a range of IP addresses as a netmask? For example, I can apply this configuration without the ASA throwing any errors though the configuration calls for a 'net mask':
object-group network test
network-object 192.168.0.0 192.168.63.255
network-object-group mode commands/options:
A.B.C.D Enter an IPv4 network mask
sh run ob id test
object-group network test
network-object 192.168.0.0 192.168.63.255
I found that in the documentation it requires a netmask as oppose to a range. Is this a bug in the code? I am running code version 8.0(5)23 on a 5520. If this is not a bug how does the ASA treat this type of configuration when applied to an access list? When I ran a quick packet trace and denied access from that range it looks like the ASA doesn't read that configuration properly. Thank you.
-John

Hello,
Thank you for your replies. In code version 8.0(5)23, it appears I am able to define a "range" of IP addresses as in:
192.168.0.0 192.168.63.255 as opposed to defining a range with a netmask like 192.168.0.0 255.255.192.0.
With the "range" of IP address applied to the "object-group network test" with sub command "network-object 192.168.0.0 192.168.63.255" the ASA does not pick up on said "range" when this object group is applied to a DENY access list. It only reads it properly when the netmask is attached, which is the correct configuration, as in: "network-object 192.168.0.0 255.255.192.0".
To clarify, I mean range as in 192.168.0.0 - 192.168.63.255.
Hope this helps to understand. I am just curious as to why this is even able to be applied in such a way or if it is a bug in this particular code version? I can also confirm that this can be done in code version 8.4(2). See below snippets of my configuration in the 8.4(2) code version:
access-list 101 line 3 extended deny ip object-group testmask any 0x577f55a8
access-list 101 line 3 extended deny ip 192.168.0.0 192.168.63.255 any (hitcnt=0) 0x0623b0c4
access-list 101 line 4 extended permit tcp any any eq 89 (hitcnt=1) 0x36f1e5cd
Packet trace results in allowing the "range" of IP address:
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: dmztest
output-status: up
output-line-status: up
Action: allow
Now with the "correct" configuration:
access-list 101 line 3 extended deny ip object-group testmask any 0x577f55a8
access-list 101 line 3 extended deny ip 192.168.0.0 255.255.192.0 any (hitcnt=1) 0xa31c6bbd
access-list 101 line 4 extended permit tcp any any eq 89 (hitcnt=1) 0x36f1e5cd
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: dmztest
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
Thank you.
-John

How to create a transaction code for a function group with screen 100 as st

Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

Problem removing bundles from group with ZLMAN

I am having trouble removing a bundle from a bundlegroup with the zlman utility. The syntax I am using seems correct and the groups and bundle name are also.
Here is the command and it's output from the command with the debug option: (if I use a bogus name for the package the output will tell me that the bundle was removed successfully :-)
This ZLM72IR2 with Hot-Patch 3
Any ideas?
Thanks
command:
zlman bgr -U administrator -P xxxxxx -V -d Patches/Servers/sles10-sp1/Pre-Prod-security patch-slesp1-yast2-core-4623_SLES10-SP1-Updates
output:
com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFault={_Message=An error occurred while trying to remove the grouping data.,_Type=5}
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Construc tor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFaultMarshaler.deserialize(CoreAPIFaultMarsh aler.java:35)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:433)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:410)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:372)
at com.sssw.jbroker.web.core.InputStreamImpl.readObje ct(InputStreamImpl.java:278)
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2682)
at com.novell.zenworks.zlman.commands.Commands.groupR emove(Commands.java:598)
at com.novell.zenworks.zlman.commands.BundleCommands. execute(BundleCommands.java:1286)
at com.novell.zenworks.zlman.ZLMan.main(ZLMan.java:28 0)
Caused by: com.sssw.jbroker.web.portable.ApplicationException
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2689)
... 3 more
[5] Fatal Error: An error occurred while trying to remove the grouping data.

brunold,
I created a bundlegroup called Testbundle directly under the /Bundles container and tried to remove a couple of different patches. The results were the same. My server is SLES10SP2 64-bit by the way.
Thanks,
Frank
zlman bgr -U administrator -P dnctl2RA -V -d Testbundle patch-slesp1-915resolution-4728_SLES10-SP1-Updates
com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFault={_Message=An error occurred while trying to remove the grouping data.,_Type=5}
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Construc tor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFaultMarshaler.deserialize(CoreAPIFaultMarsh aler.java:35)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:433)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:410)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:372)
at com.sssw.jbroker.web.core.InputStreamImpl.readObje ct(InputStreamImpl.java:278)
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2682)
at com.novell.zenworks.zlman.commands.Commands.groupR emove(Commands.java:598)
at com.novell.zenworks.zlman.commands.BundleCommands. execute(BundleCommands.java:1286)
at com.novell.zenworks.zlman.ZLMan.main(ZLMan.java:28 0)
Caused by: com.sssw.jbroker.web.portable.ApplicationException
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2689)
... 3 more
[5] Fatal Error: An error occurred while trying to remove the grouping data.
zlmprd1:/var/opt/novell/zenworks/scripts/movepatches # zlman bgr -U administrator -P dnctl2RA -V -d Testbundle patch-slesp1-915resolution-4728_SLES10-SP1-Updates
com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFault={_Message=An error occurred while trying to remove the grouping data.,_Type=5}
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Construc tor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFaultMarshaler.deserialize(CoreAPIFaultMarsh aler.java:35)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:433)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:410)
at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:372)
at com.sssw.jbroker.web.core.InputStreamImpl.readObje ct(InputStreamImpl.java:278)
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2682)
at com.novell.zenworks.zlman.commands.Commands.groupR emove(Commands.java:598)
at com.novell.zenworks.zlman.commands.BundleCommands. execute(BundleCommands.java:1286)
at com.novell.zenworks.zlman.ZLMan.main(ZLMan.java:28 0)
Caused by: com.sssw.jbroker.web.portable.ApplicationException
at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2689)
... 3 more
[5] Fatal Error: An error occurred while trying to remove the grouping data.

Making a clipping group with a compound path

So, as of today I'm new to scripting for Illustrator, I'm using the ExtendScript Toolkit. However I'm not new to scripting my own solutions and I do have some experience with JavaScript already.
What I'm trying to do is this: For all selected Items->Duplicate selected item and make a simple clipping group with it
What I end up with visually doesn't change the picture, but gives me a lot of clipped colored areas which I then can edit in the isolated mode, allowing me far faster and better shading. Doing that by hand takes hours on some pictures, it'd take a second with a script.
The script itself already perfectly works for normal PathItems. As obvious in the title, as soon as I have to apply the same to CompundPathItems things stop working. My issue is somewhat similar to this old thread [Problem with compound path clipping], but I couldn't find a solution there because I get different behavior.
When I run the very same script that perfectly works with the normal PathItems with CompoundPathItems I get this: Error 9046: The top item in the group must be a path item to create a mask
Well that's a problem. In the GUI there is absolutely no difference between making a clipping mask with a simple path and a compound path. The reference guide has frankly not helped me with this issue at all, the only thing I learned from that is that the CompoundPathItem object doesn't have a clipping attribute, but those included PathItems do.
Here's what I have so far:
if ( selected[i].typename == "PathItem" ) {
var newGroup = doc.groupItems.add();
copy = selected[i].duplicate(newGroup,ElementPlacement.PLACEATEND);
selected[i].moveToBeginning(newGroup);
newGroup.clipped = true;
As I said, this part perfectly does what it's supposed to do for normal Paths.
For CompoundPaths I use this workaround.
if ( selected[i].typename == "CompoundPathItem" ) {
var newGroup = doc.groupItems.add();
copy = selected[i].duplicate(newGroup,ElementPlacement.PLACEATEND);
selected[i].moveToBeginning(newGroup);
compoundItems = selected[i].pathItems;
compoundIndex = compoundItems.length;
for ( f = 0; f < compoundIndex; f++ ) {compoundItems[f].clipping=true;}
var lineList = new Array(10);
for ( l = 0; l < lineList.length; l++ ) {lineList[l] = new Array( i * 10 + 50, ((i - 5) ^ 2) * 5 +50);}
newPath = app.activeDocument.pathItems.add();
newPath.setEntirePath(lineList);
newPath.moveToBeginning(newGroup);
newGroup.clipped = true;
newPath.remove();
Mind you, this workaround does work in so far that it bypasses that annoying and wrong error, and the Compound Clipping Path also works, with the only problem being that the Compound Clipping Path created like this is still displayed in its original colors in the Layers section, and is still selectable. When I lock the Compound Clipping Path I can work with it but still...
So the question is, what am I missing here? Surely there must be a proper way to do this.

app.executeMenuCommand()? That one eluded me so far, might be just the right thing. I'll definitely take a look, now just to find a ref on that, as unfortunately the official ref documents I have don't mention that command. Any place with a list of possible commands?
Ah, also of course I'm not only doing it for the isolation mode. If you care to hear the background, here is it:
As I said it's for shading the pictures I'm working on. I've iterated and tried through a bunch of techniques. For example gradient meshes on my first few real works. Now those meshes don't do well with complex shapes, which previously I alleviated by using a simple square or rectangle gradient mesh and using the original colored shape as a clipping mask. That did work, but it was a huge lot of work.
After a bunch of attempts at that I went over to using simple gradients as a background for the shape and then I'm doing the shading freehand with the blob brush tool, using a graphic style and filters to make it look right. That's better, but properly making all the clipping masks takes me much longer than anything else.
Now the problem is that the shading is not supposed to go over the lines, which is impossible to do properly without either messing up the order, or using clipping masks, hence the script. Because you know, if you use a blob brush with a strong Gaussian blur close to the lines you'll end up with stuff on both sides. If you don't start close to the line the shading won't look right if the darkest part of the shade needs to be close to the line. And that's where clipping masks do magic.
And finally here's an example how I work with the script and the result:
After I have traced a sketch, adjusted the line widths and everything to look neat I turn the paths to outline strokes and then make them into a live paint group (which would mess up the line widths, unless you turn the paths into outline strokes first).
With that live paint group it takes me just a few minutes to flat color my piece. Then I expand the live paint group, in case of doubt spend some more minutes to make compound paths from all areas I need to shade in one piece, then I select all the areas and use my script to turn them into neat clipping masks. Then I can click any area, enter the isolation mode and go up one level so I'm in the appropriate group, where I can shade freely without the problem of going over the lines.
At the end that allows me to apply a complex and in-depth shading, without wasting any time to get there.
PS: Well, I just found out that Draw Inside is pretty darn close to what I want to do, and oddly enough it produces the same visual discrepancy with compound paths that my script produces. I'll be taking a closer look at that, though my script does a little more than just the clipping mask stuff, so maybe I'll go for a hybrid solution. Whatever makes for a better workflow.

OS group with write permission

Installing on Linex need this...
Enter the name of an operating system group that has write permission to the directory.
How i can make group with the right permission on linex .
Please forward me command to make OS group and giving it write permission.

I am installting Linex OS , with 10g , Can you please guide me how i can create administrative group in OS for installing Oracle. For
Loging onto you computer as a member of the administrative group that is authorized to install Oracle software and create and run the database.
I want to install Linex & Oracle 10 g exactly like the link i am forwarding you
http://www.oracle.com/technology/obe/2day_dba/install/install.htm#t1
Can any body guide me how i can do that? I mean during Linex installtion how many directories i have to made with what permission. & what commands i can use for that.
Arif

Issue with Enter-PSSession when running from the shell and via script

Hello
Can someone please help me with the following issue
If I open the PowerShell console and do the following
Enter-PSSession -computername Server1
"This is a test" > C:\Log.txt
Exit-PSSession
It works e.g. the Log.txt file is create as expected on Server1
However if I put the exact same command in a script and execute the script.
./TestScript.ps1
The Log.txt file is created on my Client (e.g. PC) and not the Server1
I also tried using $Session = New-PSSession -ComputerName Server1 etc.....
then Enter-PSSession -Session $Session
I also tried Enter-PSSession etc....
Start-Sleep -seconds 60
"This is a test" > C:\Log.txt
Exit-PSSession
Again no luck when running from shell all OK, then executing as a script (again from the command line) files is created on client
Any ideas why this is happening please and how to resolve, I am using PowerShell v4 on the client and PowerShell v2 on the Server
Thanks
AAnotherUser__
AAnotherUser__

No, the command is explicitly designed for interactive use, not within a script. If you see
http://technet.microsoft.com/en-us/library/hh849707.aspx you'll even see it clearly state that it "Starts an interactive session with a remote computer".
There are quite a few threads elsewhere on the same subject, all of which say the same thing, for instance
http://powershell.com/cs/blogs/tips/archive/2010/11/15/enter-pssession-do-s-and-don-ts.aspx and
http://powershell.org/wp/forums/topic/running-multiple-remote-commands-with-enter-pssession/ and
http://blogs.technet.com/b/heyscriptingguy/archive/2009/10/29/hey-scripting-guy-october-29-2009.aspx and
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/7e89b957-ff5b-42c4-b107-d7e18752fcf1/enterpssession-within-a-script
So when you run it interactively, you've started the interactive connection to the remote computer and are now running the relevant commands on that machine. When you run it from the script it starts the remote connection, but crucially it doesn't use that
new connection, the script is still being run in the current local session.
When you think about it makes sense. Using the Invoke-command method you're connecting to a remote machine, sending the script block to the remote machine, and then running that block of code on the remote machine. The remote machine only knows about the
code you send it, not the rest of the script (which is why if you use variables you have to pass them to invoke-command otherwise they won't be available to the script block on the remote machine. Conversely, when you use the Enter-PSSession method, you've
connected to the remote machine, but you haven't passed any code to it. At that point you're on the remote machine, but it has no way to know what you want it to do since your script code is on the local machine. It can then either return to the local
machine and run the next line of code locally (which it does), or sit there connected to the remote machine waiting input that will never come (which would be even less useful).

Regarding : How to add a user to portal group with the help of webdynpro .

Hii ,
I am working on an application in which with the help of an action( Button) we r adding a user in Ztable in R/3 , as well as group in portal.
The user r successfully creating in Ztable but from portal side No user is assigned to Portal group.
I need coding solution for " How to add a user to portal group with help of webdynpro"
Any usefull link will also do.
Pls anyone have any solution ??
Thnks in advance.
Rewards r waiting for u .

Hi,
Use UME api to add user to portal group.
Using UME API:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
Regards,
Naga

Change OBD Group with WM reference

Hi Experts,
I have created an OBD group with WM reference in VL06P. Next, I tried to create TO for group. However, if there is an OBD being locked and cannot create its follow on TO. I would like to remove that OBD from the OBD group and create another OBD group for it later on.
The problem is when I execute the first TO for group. The OBD group will marked as active and I cannot remove any OBD from it. (Am I right?)
I tried to reverse the processing status. However, it seems there's no way to change the group status. Is there any tcode for this?
Actually, I need to use this OBD group with reference is not due to 2 steps picking but I need to relate other TO with this OBD group. I only want to fill the LTAK-REFNR for other TO not related to any OBD to this OBD group. SAP only allows a OBD group with WM reference in the LTAK-REFNR field.
Regards,
Alex

Ah, yes, Apologies
I tested the same in lower system and I get message/number:
Change cannot be made due to status of reference number XXX XXXXXXXX
Message no. VL826
I am not aware of anyway to override this behavior. I did test deleting the delivery to confirm it would disappear from the group but that would not help when the delivery is locked, hope some one else can comment
(please note: as per your comment that the delivery is locked I did not test further to process the group after removing the delivery ((if you are able to delete the delivery I would recommend a quick test to confirm that does not create any challenge with processing the remaining deliveries)

Customer Account Group with Output Procedure assignment

Hi Gurus,
Is there any assignment is possible between Customer Account Group & Output Procedure? What is the function of Output procedure DB0001, I mean how its works. How in Customer Master Output box will get open. Please give details as much as possible.
Thanks & Regards,
Savi

Dear Savi,
Yes it is possible to assign the output determination procedure to the account group.
IMG path to assign output determination procedure
SPRO>Financial accounting>Account recievables and Account payables>Customer accounts>Master data>Preparations for Creating Customer Master Data>Define Account Groups with screen layout (Customers) select account group then go in to details here you can find the field Output determ.proc. under general data tab.
If you assign the output determination procedure to the account group, the output box will open in the customer master record in the Sales area data as Documents tab here you can enter the output types which are related to you.
I hope it will help you,
Regards,
Murali.

Button Group with Command SAVE_DATA execute with ENTER

Similar Messages

Maybe you are looking for