Button not doing what it should

I have two buttons on my page, button 1 and button 2.
They have different appearences once tapped, under "click" applied to them, just to add a little extra to my app.
The "event" is "on release".
The actions I have set are "go to state", i have three of these actions asigned to each button.
I have three object states on the page, each object state having two different states within it.
The object states have no "swipe to change", "cross fade" etc. as I want them all to change instantly..
So Button 1, when pressed, is asigned to change to Object State 1,2 and 3's State 1's.
And Button 2, when pressed, is asigned to change to Object State 1,2 and 3's State 2.
But,
When I touch button 1: only 1 of the 3 object states change.
When I touch button 2: the same state changes, only.
.....................then if I simply nudge the page, after pressing a button, all the states change to what they should be?
Is this because I need to wait for the update of Content Viewer on my iPad?
These buttons work perfectly on my mac's Content Viewer, not a problem or glitch at all..
If I have my object states on "cross fade" at any speed, they work perfectly as well.

Ok I tested another file and there's still the same exact problem.
I used blocks of colour as buttons and for the MSO, just in case it was something to do with that..but nope, still only the first action of the button works

Similar Messages

Shift +F3 not doing what it should

Shift + F3 should enable me to change from upper to lower case. Instead on my 8.1 Toshiba laptop it brings up the brightness control, which should only come up with the F3 on its own or with the FN key. Is this a fault with the keyboard? I only had
it this Christmas.

First check if Shift, Fn, F3 work well in other situations.
Click File>Option>Click Customize.
Click Customize beside Keyboard Shortcuts
Select All Commands in Categories
Select ChangeCase in Command
Add to the ribbon, place your cursor onto the botton and check if the shorcut is
Shift+F3
Check if the following information is helpful
Hot Key Controls (Developer's Choice)
If you just need custom Keyboard shortcuts for Triggering an action try
Auto Hot Key.(End Users' Choice)
(Please Note: Since the web site is not hosted by Microsoft, the link may change without
notice. Microsoft does not guarantee the accuracy of this information.)
Tylor Wang
TechNet Community Support

Keyboard keys not doing what they should.

Okay, here's the deal, about a week ago I spilled a beverage on my keyboard. Everything is fine except my keyboard, that's to say it "works" but not quite. It's like my keys remapped themselves, for example the "delete" key functions as f12 and turns up the volume, that's the big one, some of the keys on right side only make a "Bong" sort of noise, i've been using an extrernal keyboard for now, but i'm wondering if there's any sort of fix, short of sending it in.

Go into System Preferences and click on the International icon. Make sure your input method is set to a U.S. keyboard. It sounds like some other foreign keyboard layout is in use.

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne

Best Buy Appliance Delivery Not Doing What They Said They Would Do. Order Cancelled.

I recently purchased a refrigerator from bestbuy.com and chose the option to have it delivered on Tuesday the second of December (today). I received an order confirmation e-mail from best buy on the day of purchase (November 28) which stated the following (taken directly from the e-mail):
The scheduled appointment date of your item(s) below is Tuesday, December 2, 2014
We'll call you by 9PM the night before your appointment with an estimated arrival time window at the phone number(s) you provided at the time of purchase (with either live or pre-recorded calls).
Thank you for shopping with us.
Sincerely,
Karalyn Sartor
Vice President Customer Care
Yesterday, on Monday the 1st of December, I got a knock on the door from the Best Buy delivery team. They had my refrigerator and were here to deliver it. I was not ready for them to deliver the refrigerator at that time, at all, as I was not expecting it. I asked the driver to please deliver it on the scheduled date. The change in scheduling happened without a postive notification.
I checked afterward and saw that their was en e-mail sent during the evening of November 30 informing me that the refrigerator would be delivered on Monday the 1st. This e-mail was in my spam folder and I did not see it. I did not expect it either as I was under the impression that I would be called by phone prior to delivery (as stated in the original purchase confirmation e-mail). So some mistake/change in scheduling happened. Not a big deal to me.
Thirty minutes ago I called the 1-888 number mentioned in the e-mail to inquire about what time I could expect my refrigerator to be delivered. I was told it was rescheduled for December 20th, which is not acceptable to me.
I was told the earliest delivery date that they could honor would be for monday the 8th of December. That is unacceptable to me as well. I was advised I had no other options for delivery other than to receive it on the 8th of December, 6 days after the aggreed upon delivery date.
In the end I cancelled the order. As a customer I do not like to be treated this way (to be told one thing at first (delivery date and that I would be called by phone), to have that one thing change, and to not be told in a *reasonable* manner that the one thing had changed.
Best Buy customer service, If you would like to contact me you have my e-mail address. You also have my correct phone number for calling me, which your system verified when it looked up my order by phone. Until then, please consider me an unsatisfied customer that will look very closely at other buying options for all my future appliance and home electronics needs.
Thank You.
P.S. - The person I spoke to on the phone to inquire about and cancel my order was very courteous and professional.

To Whom It May Concern,
I posted earlier regarding a refrigerator delivery problem. http://forums.bestbuy.com/t5/Delivery-Installation/Best-Buy-Appliance-Delivery-Not-Doing-What-They-S...
I've since read a few of the other posts and think I see some common issues that many others have been having:
1. Not calling the customer. We (customers) expect someone will call us the day before a scheduled delivery date to confirm the item is being delivered and approximately what time to expect it. The confirmation e-mail you send even states that this will happen.
2. Not notifying the customer regarding changes. We (customers) expect someone will notify us if delivery dates are changed. This is especially important if the delivery date has been moved forward, as in my case. My particular problem would have been avoided entirely if someone from Best Buy would have notified me that the refrigerator I ordered would arrive one day ahead of schedule. An e-mail is not a good enough notification when you move the shipping date forward. How do you even know I have read/received it and will be home?
3. Not working with the customer. I've read a few forum posts where some mistake has happened, and now shipping is delayed by a signifcant amount of time (a week or more). If you (Best Buy) had some better way of working with whoever does your delivery for you, things would be better.
In my example the original delivery date was for today (Dec 2nd). You decided to deliver a day early on the 1st without making sure I knew you were coming on a differnet day than scheduled. So I wasn't ready. At this point I believe you (Best Buy) should have tried to correct this by rescheduling the delivery so that it happened on the original delivery date, December 2nd. You could have also arranged to deliver it later that same day, I would have been ok with that and had time to make things ready. Instead the delivery got rescheduled for the 20th of December by the system, and your customer service could only move it up to December 8. In a situation like this I think it would be better if you worked more with the customer (pay a driver an hour or two of overtime to get the goods delivered on the day you said you would or delay someone else who placed their order after I placed mine). Instead I was given one and only option, delivery on December 8.
In the end I took the other option, cancelling my order. You have lost my business on this sale and I now have a lower opinion of Best Buy as a company and a brand than I did before. This could have been avoided if you did any of the above three things.
Thank you for your time.

Extract Pages- and the Split- not doing what I expect them to

I have a document created in Illustrator (CS4) which has multiple artboards. I want it split into multiple documents, one art board—> one document with only that artwork. When I use the Extract PAges… and the Split… comands to generate multiple documents, I get the multiple docs (same number of docs created as pages in original doc).
Only thing is every doc has all the artboards and all the artwork as the original doc. I could understand all the artwork being there but all the artboards also?? What's going on?
Appreciate any pointers on this.
Trying to write a JSX to run in AI but struggling so far. Thread for AI solution started here: AS) export single page PDFs from multi-artboards

I don't expect mind reading but I'l settle for careful reading
I tried to explain how pages and artboards are qualitatively different objects only to be told they are the same thing and that's all I needed to say.
I tried to explain that opening the very same file in Illustrator showed a lot more objects than it did in Acrobat. You probably don't remember because you breezed over something that you didn't think you needed to know because you were, at each stage, a step ahead of me (slow down already!).
From my second post:
I can't remember if Splitting gave enumerate files or the one file but either way ALL the artwork was in the enumerate files if they got made [.…] I ended up saving as CS3 .ai files which gives a Save artboards to seperate files option and, unlike the artboard range option on Save As PDF, it actually works.
From my third post
An artboard is not a page as far as Acrobat and Illustrator apps are concerned. I was trying to highlight the distinctly different way the two apps handle them. I can watch a one page with just one shape document in Acrobat become a 20 artboard, 40+ objects layout in Illustrator. Same document interpreted as one Page in Acrobat and 23 artboards in AI.
I was on this forum because even a manual Document Menu> Split… command is not doing what I expected with the AI generated 23pp PDF file. I expected the 23 individual 'artboards' and content to each make a separate file.
Thom Parker wrote:
I don't remember you mentioning that you re-imported the PDF files into Illustrator. This is an important detail. You also posted to an Acrobat scripting forum and never said you were not interested in an Acrobat Script. You also never explained the problem you were seeing. You were never clear.
Covered that but note Illustrator doesn't import PDF files. .ai .eps and .pdf are all native files for Illustrator and just open, sometimes with an additional dialogue to choose a page from multiple pages. It imports .dwg, .svg and that sort of thing relying on translator plugins. This is the fourth time I'm saying I should have posted in Acrobat Win or Mac not scripting, apologies I was scripting when I made OP and probably frustrated. You were more clear it's true, clearly ignoring what I was getting at in each post re artboard cf. page objects.
You see, in a PDF file each page has it's own content stream, i.e., a stream of vector graphics operators. Graphics can be drawn anywhere in the coordinate space, but the page view is clipped by a crop rectangle. So graphics can exist in the stream, but never be visible to the user because they are outside the crop. I get the impression that in Illustrator the Artboards all exist in a single coordinate space? And that the conversion to PDF places this entire coordinate space into a single content stream. Then each page would be a different crop of the same content stream. If this is the case then I believe there are PDF optimization operations in Acrobat that would fix your problem by removing all content outside the crop.
Yeah I've hacked lots of PDF files in AI. They use more than one clipping rect per page from memory. Correct, the artboards are defined in a single co-ord space it would seem — artboards are discretely and independently located on the document canvas and can even overlap each other. Yes those operations might work, I never though of that, I came across an Illustrator based solution early on in this thread. There's no conversion going on in Acrobat though I think, the file stays native PDF from AI to Acrobat and back to AI. As I've noted it's the way Acrobat displays or parses the data that in effect hides all the 'off-page' objects but open the same file in AI and it's all still there.
You know, we can't read minds, you actually have to explain what it is you need.
I didn't know it, but I needed to get a confirmation on the artboardRange property bug in Illustrator CS4 and/or a confirmation that artboards are not treated as page objects, and I ended up having to lecture you on something you may have no interest in, sorry if I've been a pain. This is part of bigger bug elsewhere that I've been trying to get resolved or around on and off for a month. Every turn another bug, it gets confusing and frustrating at times

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. Help!

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. These extra pages resulted from using Autoflow and now we can't seem to get rid of them. Help!

Good morning Old Toad.
I did as you suggested:
1) Booted from install CD.
2) Ran Disk Utilities on internal hard drive--no repairs necessary. For good measure, did the same thing on external drive. Also no repairs necessary.
3) Checked software update--no updates found. About this Mac said I was already running 10.4.7. For good measure, I downloaded the latest and installed it. Since it let me run the install, I'm not sure if I installed something new or reinstalled what I already had.
4) I rebooted from CD, ran disk utilities, ran repair disk--no repairs necessary. Repaired permissions and a lot of permissions repaired.
5) Tried to delete the files and the same old thing happened: kernel panic. The specific message:
panic(cpu 0 caller 0x00102A08): jnl: transaction too big (1587712 >= 1572352 bytes, bufsize 8192, tr 0x29f1fb0 bp 0x2801de40)
So there's no change in my status.
I'm trying to delete the files because:
A) They already take .5 Gb.
B) I can't get rid of them ever. If I move the problem files to a different folder, I can only do one successful drag-and-drop backup to the external drive until the "new" thumb segments become unerasable just like the previous versions and crash the system.
C) I can't even "just" drag and drop every file/folder except the thumbs, because that ends up crashing the system as well. So I have to drag and drop every file/folder in the iPhoto hierarchy individually. Which makes me less inclined to backup, which defeats the purpose of a backup.
D) After the iPhoto fiasco I'm just crabby about all the Apple screw-ups I'm experiencing and I want to get them fixed.
Thanks for your help. Any additional suggestions would be appreciated.
G4 Mac OS X (10.4.6)

Last night my iphone said it was overheated, and shut off. it has been over 24 hours and hasnt turned on since, not sure what i should do?

last night my iphone said it was overheated, and shut off. it has been over 24 hours and hasnt turned on since, not sure what i should do?

Perform a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. If this doesn't help, connect the phone to the charger and leave it for about 30 minutes and see if it comes on. If not, while it is connected try the reset I described first.

HT1414 My daughter has an ipod touch 1/2nd generation not sure but it's older, and we can't open it because it says "IPod is disabled connect to iTunes" but it won't connect to my Imac either not sure what I should do?

I've rebooting it several times and it still says it's locked. Not sure what I should do she's young so I don't want really want to have to buy her a new one. Thank you for your help.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

Hi jandroantonio,
Welcome to Apple Support Communities.
It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy

When I activate the device when it entered my Apple ID will not accept what I should do?

When I activate the device when it entered my Apple ID will not accept what I should do?

PLZ Help me

I do not know what I should phone is locked after changing the operating system

I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Ipad off button not working what to do

How to fix or what to do my ipad2 off on button is not working what to do

How old is the phone? You can go to Check Your Service and Support Coverage to find out where you stand warranty wise.
There is a one year limited warranty, the only way to find out if this repair is covered is to have it checked out. There is no charge in any case for the initial check.

HT201320 i can recieve but not send what address should i put in?

I can recieve but not send emails from my iphone what address should i type in?

contact your internet service provider and ask for the correct settings in the outgoing server of the email in your iphone

Button not doing what it should

Similar Messages

Maybe you are looking for