Buttons work on webpage, not on CDRom site

hi there,
i have built a simple mp3 player, shown in the website
www.nevereleven.com - the
little red thing down the bottom called "neverplayer". It works
fine over the net (as hopefully you'll see; if it doesn't let me
know!)
A subset of the site contents need to be distributed on
CDRom, including the "neverplayer", the only difference being that
it will play the full length tracks rather than short samples.
The mp3s are loaded externally (not embedded in the flash
file).
The problem is, when it is run from CDRom,
in one particular case, (works fine on all machines i've
tested on, doesn't work on client's machine!!! of course) the
little buttons do not display! (skip tracks, stop, pause, etc - the
bottom row.) They still function correctly if you mouse over and
click them - but of course it's hard to find them if you don't know
they're there. Everything else about the player still works fine
too.
The machine that it doesn't work on is running XP... not sure
what browser or other specific settings. I've tested on XP machines
using both IE and Firefox and it works for me everywhere else -
just this one isolated case (so far, hopefully not the majority of
the audience when it goes public!).
Anyone have any ideas on what might be going on here?
Thanks,
Cazz

Then it sounds like something is wrong with those Sub-picture Highlights.
Could you Open that problem Menu in Photoshop, open the Layers Palette, and twirl open your Button Layer Sets, showing all the elements, then post a screen-cap? Maybe someone will be able to see the issue.
Good luck,
Hunt

Similar Messages

Toolbar buttons work in preview, not in generated webhelp

I'm using RH 8.0.2 to generate webhelp.
I took advantage of a few snippets from Peter Grainge's site and have 3 new toolbar buttons for my project:
Here's where I need help.
1. Report an Issue links to a sharepoint site on our network. The link works fine, but displays inside the topic frame. What is the proper Inline JavaScript to open the sharepoint page in a new window? For ease of reply, say the link is http://www.mysite.com/issues/default.aspx
2. Send link by Email sometimes creates a draft email when I click it in the preview pane, but I haven't figured out the reproducible conditions. It doesn't seem to work in the generated files however. A similar issue seems to occur for the Copy Link to Clipboard button - sometimes works in preview, but not in generated webhelp.
Notes:
The Javascript I used for Send Link by Email, from Grainge's snippet 39, is:
window.location=('mailto:[email protected]?Subject=Useful Information&body=This page might be useful to you: ' + window.parent.frames[1].frames[1].document.title +' ' + escape(window.parent.frames[1].frames[1].document.location))
Note, this script throws an error as you preview, 'window.parent.frames.1.frames.1.document is null or not an object.
The Javascript I used for Copy Link to Clipboard, from Grainge's snippet 114, is:
function CopyURL()
var myHerf=parent.frames[1].bsscright.location;
var title=parent.frames[1].bsscright.document.title;
if(window.clipboardData)
var tempCurLink=title + "\n" + myHerf;
var ok=window.clipboardData.setData('Text',tempCurLink);
alert("Press Ctrl + V to Paste the link in your email");
Any help appreciated!

Hi there
When you visited the page where you downloaded, I'm guessing you failed to also take a look at the link on the page designed to help with this?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

[Partially SOLVED] Wiimote buttons work, motion does not...

Followed all the tutorials on the wiki and the wiimote is recognized just fine... all the buttons seem to work (terminal shows output when I press dpad, A, B, +, -, home, 1 and 2) but I am not getting any motion out of moving it in the air. I have a wireless sensor bar and wmgui detects everything just fine... just not sure what I'm mising config-wise that is not allowing me to move the cursor around the screen as I move the wiimote through the air. Any and all help is appreciated!
Last edited by CPUnltd (2011-02-25 04:14:50)

seriously interested in getting this to work properly with the sensor bar! I just tested the dolphin-emu that is in the AUR repo... can confirm this build works with Need for Speed: Hot Pursuit! Renders In-game and menu graphics just fine, cinematics are a bit screwy, and sound seems fine... plays a little sluggish on my dual-core (2.1) AMD laptop w/ 8GB DDR3 (but that might be due to the rom being on a flash drive and not the internal SSD). Hope development is still continuing! Haven't tested any GameCube games yet... If anyone knows of a good tool to rip GC games with, I'd be more than happy to play with it.

Buttons work in Safari-Not in IE or Firefox

I've got a homepage created in Dw8 that has 2 Flash buttons
whose rollover animation was created in Flash8. However, I added
behaviors to the buttons in Dw, "onClick goTo URL". They bring up
other pages with video that are in the same folder on the server.
They work OK in Safari but not in IE or Firefox. Any ideas
why?

Hello again,
Yep, sounds like you've got the general idea.
hries22 wrote:
I'm going to start from scratch and give it another go...would you reccomend converting every button to a symbol? Then give the symbols a mouseover, click, and mouseout?
I'd take all the elements that make up the button, and convert that into a symbol. Then you can go to labels with your code without worrying about the main timeline. Put all your code on the elements themselves, and not on the symbol instance.
hries22 wrote:
Also - and this minor - but is there a way to get a button's mouseover area to recognize transparency? For instance - I'll use a .png with transparency for a button...let's say the T-shirt. I want the mouseover to activate only when the mouse is over the t-shirt, and not over the transparent area around the t-shirt...any thoughts?
By default, the hit area of a div in HTML is its bounding box. Right off the top of my head, I'm not sure there's a way to change it...maybe someone else can chip in?
EDIT: here's an old-school way...could be a lot of work: http://www.svennerberg.com/2008/09/imagemap-rollover/
hth,
Joe

Buttons work in Flash not in test Movie

The buttons are simple roll-overs that goto a labeled page in
the timeline. Simple. I've done hundreds. Have no clue why this is
happening. They work when "enable simple buttons" is activate but
when I "Test Movie" the roll-overs don't work and neither does the
action script that sends it to a certain "page". Here is the code.
Any ideas would be appreciated. Thanks

Hi dbthumb
first. Is this code on the actual button? or is it placed on
a frame?
second. you mentioned that your roll over does not work. but
the code you provided doesnt check for roll over...it checks for
release.
third. Are your frame labels correctly named? it can happen
quite often that a simple spelling mistake can be the cause of
annoying headaches.
Let me know how it goes, and we'll go from there.

Built in print button works but does not print full screen

I am using Captivate 7 and trying to use the built in print widget to print off a slide in my project. The problem I'm having is when I attempt to print off a slide using the button it only prints off half of the slide. It seems as if it is not scaling correctly and I don't any setting within the widget to correct this. I'm wondering if I need to adjust my setting elsewhere in the project or maybe there is a better way to print off a slide? Currently I am exporting this project as SWF 1024 X 768. Any ideas would be greatly appreciated!

Captivate's default print widget is hopeless. You need the Intelligent Print widget from CpGurui:
http://www.cpguru.com/intelligent-print-widget-for-adobe-captivate/

I updated my ipad3 and now it wont come on. it just shothe itunes logo and none of the button works, it is not responding what do I do?

Hi

You are in recovery mode. Do what your iPad is telling, which is to connect your iPad to your computer via USB and open iTunes. This link will walk you through the steps, but be advised, it may take several attempts to make it work.
http://support.apple.com/kb/HT1808

Fire fow will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Firefox will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will lose all personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Safari app not working, webpage not appearing and unresponsive. Calling all iphone 5 experts for help!!!!!!

Hi, need help. Safari app working fine until just now. Webpage not appearing and when trying to open the app, its a white page. Like you see pages, bookmark, the search tab, but when trying to press any of the buttons, it is unresponsive. When i try to go to setting to see if the problem can be fix, my safari setting isn't open either. I try going to icloud and try to turn off and on the safari data, in hopes that it would work. Nothing. I have done reseting network, and currently resetting all setting to see if this will work. I also did a soft restart, hard restart, turn on and off the phone multiple times. All other apps are responsive but safari. My itunes won't let me sync my phone and in order for me to do that, i would have to reset phone to factory setting, which would be a last option for me.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lost due to a reset.

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

Hi Nealeh
Thanks i think I got it working of a fashion.
Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
The scenario is:- say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
Had she had a normal skimpy bikini on, no problem!
If i don't solve it, she will get fired!
Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
"Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
I have Safari on this iPad. Guess that is all it runs.
So technology is not my friend today!

Occasionally Firefox 3.6.12 won't display photos on certain sites. Reloading works sometime but not alwasys.

At times on auction some sites such as ebay, (and others), photos won't display. If I press the reload button there's a chance the photo will display. If reload doesn't work the first time, pressing it 3 or 4 times may work but not always. Closing the site then re-opening works sometimes but not always. Annoying.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

"Edit" Button on Publishing Page Not Working

I have a publishing site which has been upgraded from 2010 to 2013 and if I click the "Edit" button in the top right or in the ribbon nothing happens. If I check the page out first then the buttons work. The expected behavior is that it should
check the page out as part of the edit operation and I see this working fine on other publishing sites that are virtually identical to the ones that are failing. When I compare the source of the pages of one that does not work and one that does work I see
that there are a few key differences:
sp.ui.pub.ribbon.js and sp.publishing.resources.resx are loaded on the site that is working but not the one that is failing
JavaScript variables such as pullPageVariation, l_ur_plsWait, l_ur_rfct, etc., are defined on the page that works but not the one that fails.
A JavaScript block which adds functions such as PublishingRibbonUpdateRibbon(), EnsurePublishingConsoleActionScripts(), etc. is loaded on the site that works but not the one that fails.
There are other differences but I believe these are the relevant ones. In reflecting some code that handles the Edit button I can see that this missing pieces are key but I've not been able to determine why they're missing. I've looked at the delegate controls
that are registered for AdditionalPageHead and there is no difference from the site that works compared to the site that doesn't. Note that I also found that the same exact site upgraded in two different environments (dev and production) had different results
- one worked, the other didn't. Taking a backup of the site that was not working and restoring over the one that was (prod -> dev) resulted in dev now replicating the failure so I don't believe it's a farm specific thing but rather something about the content.
I reactivated all site collection and site features in case there was some odd issue with that and that made no difference.
Looking at the upgrade maintenance logs there was an error when attempting to activate the Translation feature which resulted in the PublishingSite feature having an incomplete upgrade status. Running the upgrade cmdlet again resulted in a successful upgrade,
at least according to the logs.
I'm at my wits end as to why this is not working and I would definitely appreciate any insights folks might have.
-Gary
Gary Lapointe, Blog: http://blog.falchionconsulting.com/, Twitter: http://twitter.com/glapointe Aptillon Inc.: http://www.aptillon.com

try this link:
https://social.technet.microsoft.com/Forums/office/en-US/f62ea03d-b272-473a-a663-79938d3fbea4/edit-page-button-not-working-in-publishing-site?forum=sharepointadmin
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Hide/unhide radio buttons works in lab view, not in executable

Hello,
I simplified a program I am using. When I run in lab view the radio buttons are visible or not (as programmed). But when I create an executable, this function is not working any more?
Do I need to make changes in the build settings?
best regards,
Rens van Geffen
I attached the maintest.vi (lab view program) and the executable as well in a zipped folder.
Attachments:
My Application2.zip ‏742 KB

I think it is a bug and reported it in the monthly bug thread.
RvG wrote:
Yes i know it is a dirty vi. But I only made it because I had a problem in a complicated vi, with lots of sub vi's etc. in that vi I have all wait functions etc.
I did not care about any wait function. I was just objecting about the overuse of value property nodes and that exceedingly complicated inner while loop construct that really does not do that much.
For example, your upper case structure contains writing to two value properties that exist in all cases, while the actual terminal just sits there outside the loop. The cases only need to contain what's different. Shared code elements belong outside the case! Instead of writing to value properties (which is synchronous and resource intensive), you can just write to the indicator terminal instead. Right?
In parallel to writing to the "group", you also read from another value property instance of the same. Since this happens in parallel to the case structure, you will read a stale value, and not what has been generated by the case structure during the same interation.
My code modification shows some of the simplications that can be done. Also note that data dependencies enforce the proper execution order.
Writing to the visible properties only needs to be done when the situation changes and not with every iteration of the loop. Once written, these proerties stay until changed to something else.
In summarry, these are just some recommendations. They will not fix the LabVIEW bug you exposed.
LabVIEW Champion . Do more with less code and in less time .

Track ball mouse buttons and Logitech driver not fully working on Core Duo

I have a Ligitech cordless optical TrackMan ball bluetooth ball mouse which works for me. Unfortunately, I could not map the buttons properly (the back button kept doing an F9 function rather than 'back' in Safari). The driver in System Preferences produced a warning message something like 'this won't work on a core duo imac'. Logitech did not seem to have any updates. I hunted around some alternative software and just wanted to recommend www.usboverdrive.com to anyone who has the same problem. All buttons can be easily mapped - you press the button to identify which one it is and then can change what it does.
2GHz iMacCD 20" 2Gb RAM Mac OS X (10.4.6)

Funny, not on their site!
But! You can get it here:
http://www.macupdate.com/info.php/id/8154
Again, I don't have a trackball, but give this a shot. It is the "Control Center" software, and from their site the trackball is the save version (1.62) as the mouse/keyboard.
Good luck!
Steve
20" iMac Intel 2gb RAM; Mac Mini; 14" iBook G4; iPod 3G 20gb (3rd gen) Mac OS X (10.4.6)

Home button in HTML Help Not Working

My Home button in HTML Help Not Working.
Also the Home option from the Options menu does not work. I receive the "This program cannot display the webpage" error.
I have the correct file name (titlepg.htm) in the Advanced Windows Ptoperties "Default" field and the "Home" field. However, I still receive the "This program cannot display the webpage" error.
How can I correct this situation? Thanks, your help is appreciated!

Can you post a couple of screen captures please?
One where you show the Project Explorer with the desired topic in view. Another where you show the dialog where you specify the Home page destination.
Another thing you may wish to try is to define a totally new window, assign the values there and ensure you point to the window in the Single Source Layout recipe.
Oh, and one other thing. Are you using RoboHelp HTML or RoboHelp for Word?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Buttons work on webpage, not on CDRom site

Similar Messages

Maybe you are looking for