By default - in STO P.O with UB doc type

Hi,
Experts
When am creating a purchase order with NB doc. type in ITEM level Delivery Tab is there,if i check stock type field it is showing as quality inspection stockas bu default, bcz my material is totally activated with quality management , its ok but in case of STO with UB document type with same material its showing as by default unrestricted stock , why? Manually i can change to quality stock but i want by default it should come as quality stock in my STO Purcase order.
My query is - why in case of UB doc stock type field is showing as unrestricted stock instead of
quality inspection stock
Note- Material is toatally activated with QUALITY MANAGEMENT with both of PLANT.
Thanks
Sunil
09878996821

Hi Sunil
As you are doing STO and you are doing quality check also then first of all check in the NB document type details that by default quality check has to be triggered .Also maintain quality check at delivery level also as you are doing STO
Check in UB document type wheather the first option is unrestricted use, 2nd option is unrestricted and quality check and 3rd one is quality check has been maintained. And in UB document type that feild might have been kept blank that is the reason you can scroll down and see all options. So maintain in UB document type the option Unrestricted use and quality check.
Regards
Srinath

Similar Messages

How to default Particular G/L code in Particular Doc Type in PO

I want to default Particular G/L code for a Particular P.O Doc type with item category as "K" .
I do not want to Link G/L code to a Cost Center But want to default particular G/L code ithat particular Doc Type which is a po with Item Category as "K"
We do not want to attach any G/L code to any cost center.
The defaulted G/L code should not be cahnged by User thats the requirement.
Can someone help me out
Umesh Bagul

hi
in OKB9 give default Gl for the cost center
then make the gl field as display in PO field selection
but the doc type wise GL is not possible
try with some user exit
regards
kunal
Edited by: Kunal Ingale on Jan 20, 2011 11:09 AM

Scheduling agreement with relase - doc type LPA with JIT

Hi
can any one give the steps for Scheduling agreement with relase - doc type LPA with JIT process.. and explain how the JIT will work in SA.
Pls advise what are config required and what the user tcode needed to perform the SA with JIT concept.

Dear Friend,
Without release documentation(Document type LP)
The delivery schedule lines have official character-that is to say,they are transmitted to the vendor as they are saved in the system.The system does not document in detail releases aganist the scheduling agreement that have been sent to the vendor.Therefore,in the case of the document type without release documentation,the message control facility should be set up in such a way that a message is immediately sent to vendor if any changes are made to the delivey schedule stored in the system.
With release documnetation(Document type LPA)
If you use scheduling agreement with release documentation,the delivery schedule lines are not transmitted directly to the vendor.Intially ,the lines of the delivery schedule stored in the system for an LPA scheduling agreement for an internal information only.A message informing the vendor of your material requirements cannot be transmitted to the vendor until you explicitly create an SA release,that is forecast (FRC) or Just in Time(JIT) delivey schedule.Through this process,you can change the way schedule lines are represented.With release documentation,you can disply the SA releases(delivery schedules) transmitted to a vendor over a certain period of any time.This enables you to trace precisely when you sent which information to vendor.
Regards
Pramod

Accounting doc typelink with billing doc type

Hi,
I want to see the configuration settings to be done for the accounting document type whenever a Invoice is posted to accounting.Basically if a standard Invoice F2 is posted to accounting then an accounting doc type RV is created.So I would like to know where is the link between the invoice documnet type and accounting document type maintained in the system?

Hi
In T code VOFA in the configuration of the billing type, i think in the control data tab ,there is a field called document type
This is the field to get the accounting document type
If that is left blank system takes RV by default
If you maintain some other accounting doc type in that field, other than RV ,system will pick what you have assigned
You can test this too
The Standard SAP configuration for F2 and many other billing types that field is maintained blank
Hence the system picks up RV accounting type automatically
It is because of the background program ,which runs while billing doc which tells the system to pick RV accounting type ,if that field is left blank ( coding in SAP standard is maintained like that ,to pick RV if that field is left blank)
Regards
Raja

Text determination procedure with sales doc type

For the Sales Doc type 'OR' , I am getting TEXT automatically in the Sales Order Header data , TEXT tab page.
Can Any one tell me how can I remove the text, when i create sales order.
Or please can any one give me the document or link or explain how the text determination procedure with sales doc type.

Hi Sanjay,
Thanks for your help.
I managed to go there but I am really confused of what changes I have to do there.
If you dont mind can you explain a bit in detail.
Sorry for the trouble

VF11 wrongly created with RV Doc type and with not clear status.

Hi All
Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing types) and it is in not clear status.
2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
Order Type : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
Order type: ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.
      FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
I reviewed similar issues with SAP Note and with below explanation:
          "There are 2 procedures that are possible when Vf11 is posted.
          Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
          New Procedure - A Real FI reversal was carried out with clearing."
In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
     Appreciate your answers or suggestions.
Thanks in advance,
Sunil
Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

Thank you Ivano.
I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
Thread is closed.
Sunil

Posting of cross company transaction with different doc types

Hi,
The scenario is:-
We have two companies X and Y.
X makes a payment to Y with the following FI entries:-
Company Code X
Dr Vendor Y
Cr Bank HDFC
Company Code Y
Dr Bank ICICI
Cr Customer X
Now this needs to be a cross company transaction where the doc type for CC X should be vendor Payment 'KZ' while the doc type for CC Y should be a customer reciept with doc type 'DZ'.
Although I am able to map the accounts in cross company code config I am not able to split the transaction of different company codes with different document types.
Is there any way we can do this in standard SAP?
Thanks in advance,
Nitish

Hi
As per your issue ...There are no possibilities to post in sap with different document types.
If you want you can post cross company code transactions with one document types
Regards
vamsi

PR generated with different doc type in rollout porject ....why?

Dear Friends.
We have done rollout.
Earlier imlementation - c. code=A200 .
Using standard document type-NB for PR generation.
Latest Rollout - c. code =A100
Using copy of standard document type NB as ZNB for PR generation.
My problem is that when in A100 MRP runs it generates PR with doc. type-NB (NOT ZNB) why?
same way PR generated by Plant maintanace module(PM) in doc.type-NB(Not ZNB) why?
Regards,
Mahesh.

Hi,
Check the below path of configuration, PR created with MRP run have different document type.
SPROMM-Consumption based planningplanningprocurement proposalDefine external procurement.
Hope it will help you
Thanks

Bidding - Create PO in backend with multiple doc type.

Dear Friends,
We are working on Bidding Cycle with classic scenario where we want follow-on document Purchase Order to be created with more than one document type.
So we defined
BSA attribute with ZPO & ZSRM and
DP_PROC_TY attribute with ZPO & ZSRM.
Due to DP_PROC_TY we are able to see two options for "Transaction Type for Purchase Order" (ZPO and ZSRM). However the PO is getting created with only one document type ZSRM.
Am i missing any step in between?
Or could this be a bug?
Regards,
Sandeep Parab

Hi,
See whether the foll note helps:
Note 1059053 - BBP_BID_INV:Transaction type from quotations not taken in PO
Else you can refer the suggestions given in the foll thread:
Re: BE_DOC_TYPE => ECPO
BR,
Disha.
<b>Pls reward full points for useful answers.</b>

F-44 ...change default doc type

Good afternoon Experts,
I'm trying to accomodate a request by users to have the default doc type on F-44 tcode changed. I tried first to go to OBU1, but F-44 isn't listed here and I cannot add an entry.
Any help would be greatly appreciated.
Matt

The easiest way I've found is: go to IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Open Item clearing -> Define Posting Key for Clearing Items
Then double click on clearing transaction UMBUCHNG and change the document type A/P to whichever you want. That way next time you use F-44 it will post with the doc type you entered. Same works for F-32 by changing the A/R Document type and for F-02 at G/L Document type field.
Regards,
Jorge

Partners not defaulting in UB doc type STO

Hi Gurus,
Can anybody please explain why the partners do not default in the partners tab of the PO with doc type UB when i enter the supplying plant. But the partners default in NB doc type when i enter the vendor. Why is this so?
Thanks
Anusha

sto with UB type is meant for stock transfer between plant to plant of the same company code.
There is no vendor this document. This is company's internal functionality.
so there is no question of partners and no required also.
where as sto with NB document type is for plant to plant stock transfer of different company code.
so it is treated as purchase order sent to vendor.

Default Mail app not working with yahoo mail. Won't update.

Default Maill app not working with Yahoo Mail.
It stopped working the other day. I tried everything but it wouldn't update new mail. The yahoo account itself is fine because I can see new mail on Yahoo or a yahoo app.
I tried deleting the account and putting it back on, but now it has 0 mail in any part of it. Nothing has synced.
What do I do?
iPad 2 latest OS.

A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all!

Why do I get the mesasge, default printer is not compatible with this version of photoshop elements

When I print from photoshop elements 13, I get the message, default printer is not compatible with this version of photoshop elements

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

STR to STO conversion fine with ME59 but not ME59n ????

Hi Guys,
We are planning on moving to ME59n for PR to PO conversion.
When I try to convert STR to STO with ME59n it is giving me the error message ;
- Item category U not allowed with document type
- Doc. type UB should be used for suppl. site DC06 and receiving site 2059
- Vendor RA005 is regular vendor for article 107132
- Doc. type/item cat. ZC/U (requisition) <-> /U (purch. order)
- Can delivery date be met? (Realistic delivery date: 29.08.2011)
- Requisition could not be converted
Whereas when we use ME59 it is all good... I have no clue why. Anyone have any idea?
Cheers
Julien

Hi Julien,
Enjoy transaction ME59N use MEPO logic, which is a little different than ME59N.
Please, check following customizing:
- Tcode OLME
> Purchasing
>> Purchase Order
>>> Define Document Types
Link purchase requisition - document type
Check if you have a correct link between allowed PR -> PO.
You can also make use of BAdI ME_BSART_DET, in order to propose a different document type based on your own logic.
Hope it helped you to solve your issue!
Cheers,
Eduardo Junior

By default new document/templates start with above, How I change to be Strict 1.0 XHTML ?

by default new document/templates start with above, How I change to be Strict 1.0 XHTML ?
Tell me for Dw MX2004 & CS4 ?
If I start with Transitional 1.0 XHTML and want to change to Strict 1.0 XHTML the only way is modify code or make a new doc ?

Using CS4, there are a few ways to do it:
1. when creating a new document - you can select the doc type preference.
2. In your preferences, you can set up which document type will be opened when you select a new document.
3. If you start with one doctype and want to convert it to another use:

By default - in STO P.O with UB doc type

Similar Messages

Maybe you are looking for