C# Examples and OID Registry.

I have been able to compile the C# Examples, but we are unable to run any of the examples. The error we get is:
FdkException:
Error Code: ORACLE.FDK.UnexpectedError
Detailed Error Code: ORACLE.FDK.FeatureNotEnabled
Trace Id:
info (NamedValue[]): null
SetupExamples: done
Press [ENTER] to exit.
It fails on attempting to create the session part:
session = ManagersFactory.login(credential, s_Config.getCDBUrl());
Does this need the s2stestapplication in the OID in order for it to work?
If so, I am running a windows environment, but the scripts to run this is in unix.
Would some be willing to provide an LDIF to all the entries in the OID that I need or instructions on how to create this s2s OID entry.
Thanks in advance.

Visual Studio 2005 has Visual C++ compiler 8.0. There are major changes between VC 6.0 and VC 8.0. MQ C-API library was built with VC 6 and as well as
its dependency libraries. Therefore Visual Studio 2005 is not supported. MQ 4.4 C-API library will be built with Visual Studio 2008.

Similar Messages

Questions on SSO and OID implementation on oracle EBIZ R12.0.6 ID 376811.1

Hello Guys,
IS ORACLE 10g enterprise edition is same oracle identity management because I am bit confused what is going on when we logged an SR we have been told to use oracle 10g AS (10.1.3.5) but in the note its always says oracle 10g AS 10.1.4.X. which is in turn an Identity management so we need install oracle 10gAS (10.1.3.5) then on top of that we install oracle identity management which comprises of OSSO and OID . is it correct ??
in reference note 376811.1
please advise
thanks
MN

Hello Hussien,
Anyways I upgraded to 10.1.3.5 patch_set 10gAs on ebiz r12.0.6
I have other question regarding the doc ID 376811.1
in there is section
Pre-Install Task 4: Apply the latest certified Application Server Patchset
Oracle E-Business Suite Release 12 is certified with the Application Server Patch Sets listed in the table below:
Certified AS Patchset Download Location One-off Patch details (if any)
Oracle Identity Management 10g Release 3 Patch Set 1 (10.1.4.2) 5983637 8811442
Oracle Identity Management 10g Release 3 Patch Set 2 (10.1.4.3) 7215628 8811442
Oracle Application Server and Oracle Developer Suite 10g Release 2 (10.1.2) Patch Set 2 (10.1.2.2.0) 4960210
Oracle Application Server and Oracle Developer Suite 10g Release 2 (10.1.2) Patch Set 3 (10.1.2.3.0)
5983622
Follow the installation instructions provided in the patch README to install the patch on your Identity Management Server and to check supported operating systems.
Oracle always recommends latest certified AS patchset for E-Business Suite customer
I installed oracle 10gas 10.1.4.0.1 its up and running so do i need to just apply the patchset oracle Identity management 10gR3 patcheset (10.1.4.3)
or I have to apply both 10.1.4.3 and the oracle Application server 10g release 2 (10.1.2)patch set 3(10.1.2.3.0) ???
because in enterprise manager application server control it says version 10.1.2.0.2 and identity management components show 10.1.4.0.1 .
thanks in advance.

SSO and OID concepts

Is there any document which explains the concept and architecure of SSO and OID concepts in simple words ??

Check the following notes/documents:
Overview of Oracle Single Sign-On
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28957/toc.htm
Note: 261914.1 - Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=261914.1
Note: 233436.1 - Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233436.1

AD and OID connector installation on Base version 11.1.1.5.0 failed.

Hi Experts,
I am trying to install AD and OID connectors on base oim 11.1.1.5.0
OID connector version: Release 9.0.4.12
AD connector version: Release 9.1.1.7
while installing these connectors in 3 steps
a. Configuration of connector libraries
b. Import of the connector XML files (by using the Deployment Manager)
c. Compilation of adapters
first step passed and it is failing at 2nd step and 3rd
Error:
DOBJ.XML_IMPORT_ERROR Missing root objectcom.thortech.xl.dataobj.tcUSR [DataObjectDef] (importable)
can anyone suggest me on this.
Thanks,

What's the error in the log files? full stacktrace?
-Bikash

SAP E-Commerce 5.0 - Examples and Tutorials Guide : examples source files

Hi everyone,
Where can i find examples source files of the "SAP E-Commerce 5.0 - Examples and Tutorials (Dev./Ext.) " Guide ?
Thanks & Regards

You can get the JAVA files source code from the <drive>:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\server1\apps\sap.com\crm~b2b directory, you should be able to find the src.zip file which contains the source code for the Action & Business object files.
You can access the JSP files from the <drive>\usr\sap\CD5\DVEBMGS00\j2ee\cluster\server1\apps\sap.com\crm~b2b\servlet_jsp\b2b\root
OR
You can import through NWDI into your NWDS.
Let me know if you need further details.
Thanks
Srini Sandaka

How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymac

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Even after uninstalling and delete registry, my firefox always tend to showing pop up peek. disabling add on won't help. only safe mode temporary fix this

i've tried this:
1. uninstall (standard, use uninstaller and delete registry)
2. disabling all add on
3. reset firefoxs
4. alway download from firefox site
5. Scan for viruses
6. there is no problem in my other browser
firefox only work normally in safe mode
(how to insert my screenshot here?)

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

How to write Join View Adaptor which will pull data from Siebel and OID ?

Hi Experts,
I wanted to write web service call where OIF will talk to OVD than OVD will have join adaptor which will pull few data like msisdn from Siebel and view data from oid like given name and generate SAML assertion.
I wanted to know how to write join adaptor for the same
Help Appreciated.

Hi Experts,
Is anyone has any idea on webservice call to OIF which will call OVD that will have join adaptor connecting siebel and oid ?
any help is appreciated

OIM User Creation Error After OIM and OID Intregation

Hi,
I am new in oim and i am getting popup error message for user creation from OIM application after oim and oid intregation through libovd.
Error message : LDAP create event failed : orclguid attribute has duplicate value.
please guide me for resolving error.
Thanks & Regards,
Rajeev

Hi,
Thanks for reply...i checked1307549.1 in metalink, In that link they are telling us to modify some tables in the data base.i have some question regarding the following steps please help.
=== ODM Solution / Action Plan ===
1. Use the following query to find fields with "plain text" values:
select svr.svr_name, spd.spd_field_name, svp.svp_key, svp_field_value
from svp
inner join spd on spd.spd_key = svp.spd_key
inner join svr on svr.svr_key = svp.svr_key
2. Set these plain text values to null after making backup of table.
*(kashyap:: Which fields values we have to change)*
3. Edit the Directory Server to re-set values.
*(kashyap:: could you please explain this)*
Expected error at this stage:
-- no "System Error call admin...", but that makes sense since the values in question pertained directly to the Directory Server --

Integration and reconciliation of OIM and OID

I need to do integration with OID and OIM, when i import the XML file, there are two XML files,
1) oimOIDuser
2) oimUser
which xml should be used for the integration of OIM and OID.
and for the trusted source Reconciliation.
-sudhan elango.

oimOIDUser.xml
If you are using OIM 9.1.0 or later then you don't have to import the connector
You can install it by copying the contents of the installation in OIM_HOME/xellerate/ConnectorDefaultDirectory
and then Deployment Manager-> Install connector and from the connector list select OID connector and Load
Hope it helps,
Saggu

Can I include a ClickOnce deployment and rest Registry ActiveX dll to register (program created by c #)?

hi !
Can I include a ClickOnce deployment and rest Registry ActiveX dll to register (program created by c #)?
Please answer.

hi !
Can I include a ClickOnce deployment and rest Registry ActiveX dll to register (program created by c #)?
Please answer.
Hello,
We could not registry activex dll with clickonce directly, but here is a workaround below.
1. Create Package for that activex dll to registry it to com.
2. Package that MSI to CAB file.
#1,#2 for detailed steps, please refer to the following blog.
How to develop and deploy ActiveX control in C#
3.
Deploying CAB Files Using ClickOnce Deployment
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is interface?what is EDI? take one example and explain it?

what is interface?what is EDI? take one example and explain it?

Hi,
Electronic Data Interchange (EDI) is a set of standards for structuring information to be electronically exchanged between and within businesses, organizations, government entities and other groups. The standards describe structures that emulate documents, for example purchase orders to automate purchasing. The term EDI is also used to refer to the implementation and operation of systems and processes for creating, transmitting, and receiving EDI documents.
Despite being relatively unheralded, in this era of technologies such as XML services, the Internet and the World Wide Web, EDI is still the data format used by the vast majority of electronic commerce transactions in the world.
EDI testing is to test the EDI transmissions and validate the accuracy and consistency of data mapping between the sender, translator/middleware (if any) and receiver systems.
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/EDI_tutorial.html
Rewards points if is useful.

Sun Directory Server and OID Synchronization

I'm having a problem with synchronizing OID with our existing Sun Directory Server. This is a one way synchronization, using Sun DS as the source, and OID as the destination. I've successfully installed OID with SSL enabled (this is part of an Oracle Portal installation), and followed what docs I could find. I created an integration profile based off the iPlanet Import profile, and imported a custom mapping profile based off a differing DIT naming convention (o=company.com vs dc=company,dc=com). I have applied an ACI that should allow the synchronization profile user to update entries on the OID side, and a user in Sun DS that has access to the appropriate areas on that side. I was able to successfully bootstrap and import all of our users, and it was also able modify the last changelog number.
Having said all of that, incremental changes aren't propagating to OID. I'm not sure where to look or what steps to take to troubleshoot this, as I'm brand new to OID. There's an agent execution command that is blank in the integration profile, but according to what I've found that's the default and is acceptable.
Am I missing a step here? According to the docs, all I need to do is enable the profile, and away it goes.
One last thing I had to do to overcome an issue with the changelog number not updating was adding our internal root ca's certificate to the local JVM's cacerts file. I accomplished this with the keytool command, and it seemed to work fine. I'm unsure if it's the SSL config that is hosed and is causing this, or if it's a configuration parameter I'm missing.. but I don't have anywhere to start as far as troubleshooting is concerned.

On your integration profile, did you set the debug level to 63? You should have a _____.aud and a _____.trc file in your $ORACLE_HOME/ldap/odi/log directory that will provide more info. Did you start your DIP server (odisrv) with the oidctl command?
You might also look at downloading the "diptester" utility for troubleshooting OID synchronization issues.
- Brian

IDOC with example and T.codes ??

hii
Some body explain me about the scenario and steps to be followed in configuration and in front process with transaction codes .
Jus some experts can explain me about over all procedure of IDOC in SAP with transaction code (Full cycle with examples...??
In MM , exaplin me with some examples and with transaction codes ..
Thanks

Check these links
[IDOC Configuration|http://sapmm.posterous.com/idoc-configuration]
[Learn SAP u2014 IDOC basic|http://blogs.moovar.com/sap/learn-sap-idoc-basic/]
1) What is IDOC?
IDoc means intermediate document is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system.
2) Why its is used with SAP?
IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
3) What its advantages & disadvantages?
a) IDOC - Advantages :
The target system need not be always online. The IDOC would be created and would send the IDOC once the target
system is available.
No additional programming required. Configuration is the only one need to be set up.
b) IDOC - Disadvantages :
Receipt/Processing on the target system need not be immediate
When no standard IDOC is available, then it is very hard to create a custom IDOC when compared to creating a
standard BAPI
Unless ALE is used, it is difficult to trace if the IDOC has actually reached the target system
4) IDOC flow with MM :
In order to make use of the workflow for IDoc processing, you do not have to go through the cumbersome
workflow design procedure as it is described in the workflow documentation. For the mentioned purpose, you can
register the workflow handler from the menu, which says Event Coupling from the BALD transaction.
Triggering the IDoc from a workflow event has a disadvantage: if the IDoc has to be repeated for some reason, the
event cannot be repeated easily. This is due to the nature of a workflow event, which is triggered usually from a
precedent action.
Edited by: Afshad Irani on Aug 26, 2010 5:48 PM

EUS with OVD and OID

Has any one configured OVD 11gR1 and OID 11gR1 with DB 11gR1 for EUS? Can you share your experience in configuring these components?
Thanks,

1. Extending Schema : Even though we have selected the 'auto-update schema' option during OAMIdentityServer installation, is it mandatory to explicitely extend the schemas of OVD and OID, as mentioned in the "Extending Directory Schemas" section in "Setting up OAM with OVD" chapter of 'OAM Installation guide'.
- no, if you selected auto update (and it completed successfully), you do not have to extend the schemas manually
2. Creating Mapping Files:
a. Out of the box, if we try to create New Mapping, the FileTemplate listing does not have any entry that corresponds to OID.
b. On the other hand, to load the Mapping Templates explicitely, plugins\OracleAccessmanagerOViDTemplates\mapping_templates folder does not contain the OID related mapping template files.
a - no, I do not see any templates that correspond directly to OID either
b - i do not see this directory int eh file system at all
What are you trying to map?
dave

C# Examples and OID Registry.

Similar Messages

Maybe you are looking for