C# Interactive in VS 2013

I have the Roslyn CTP installed and am able to use C# Interactive in VS 2012. However, I've installed VS 2013 Premium Preview and I don't see C# Interactive as an option.
Should it automatically show up in 2013, or do I need to remove/re-install the Roslyn CTP? Or, is there no support for 2013 yet.
Sorry, I can't remember back to my upgrade to VS 2012 to know what I did back then.

Hi SpencerGR,
I just got upgraded to VS 2013 and wanted C# Interactive, and this is the first hit when I searched for it, so I figured I would place my answer here...
Didn't make sense to me that the extension from VS 2012 wouldn't work; so I hunted down the Roslyn keys in my registry for VS 2012 and was able to kinda figure out what was going on. After a bit of futzing around, I finally got it working, so here's the
instructions for whoever might care to try [be warned, I'm sure this isn't supported by MS, I take no responsibility if something happens to mess up your computer, and so forth ;)].
Basically it was a matter of
copying some registry keys with slight modification
copying some files and
this one is annoying but oh, well] there's a file you have to change the datestamp on (I did it by opening the file in Notepad++ and saving it out.)
If you don't already have VS 2012 or you don't have the Roslyn CTP installed you'll need to get the files somehow, and I'm not sure if there are other registry settings needed or not, but I imagine if you just manage to get the files out of the CTP distro
it would be enough... No guarantees of course.
Not-Instructions-Just-An-Explanation-Of-What-I-Did-I-Am-A-Trained-Professional-...-Or-Something ;)
1. copying some registry keys with slight modification; I replaced '11.0' with '12.0' in the keys and values, you might need to change the paths too if you didn't install Visual Studio in it's default location. (also posted to pastebin.com/XeP5ai8F )
Windows Registry Editor Version 5.00.
[HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0\InteractiveWindows\0]
"ContentType"="Roslyn C#"
[HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0_Config\InstalledProducts\Roslyn]
""="Microsoft Roslyn CTP"
"ProductDetails"="Microsoft Roslyn CTP"
[HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0_Config\Packages\{c5edd1ee-c43b-4360-9ce4-6b993ca12897}]
"Class"="Roslyn.VisualStudio.CSharp.Repl.CSharpReplPackage"
"CodeBase"="C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\Common7\\IDE\\Extensions\\Microsoft\\Roslyn C# Interactive Window\\1.2.20906.1\\Roslyn.VisualStudio.CSharp.Repl.dll"
[HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0_Config\Packages\{f5199a4e-6a60-4f79-82e9-fc92a41c4610}]
"Class"="Roslyn.VisualStudio.InteractiveWindow.InteractiveWindowPackage"
"CodeBase"="C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\Common7\\IDE\\Extensions\\Microsoft\\Roslyn Components\\1.2.20906.1\\Roslyn.VisualStudio.InteractiveWindow.dll"
[HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0_Config\ToolWindows\{2d0a56aa-9527-4b78-b6e6-ebe6e05da749}]
"Name"="Roslyn.VisualStudio.InteractiveWindow.VsInteractiveWindow"
2. copying some files; basically just need to copy the files mentioned above to the locations mentioned above; I just copied the 'Common7\IDE\Extensions\Microsoft\Roslyn C# Interactive Window' and 'Common7\IDE\Extensions\Microsoft\Roslyn Components' folders
from my 11.0 install to my 12.0 install. easy peasy.
3. and yeah... there's a file in the aforementioned 'Common7\IDE\Extensions' directory called 'extensions.configurationchanged'; I couldn't get things to take, then I noticed that file. so, as mentioned, I just opened in Notepad++ and saved back
out; I think I had to make a change to the file, so I added a space. kinda felt kludgy, but I guess it beats VS taking longer to load due to having to scan the Extensions every time you open it up.
So, that's it! Worked for me, I hope someone else may find this useful, as it probably took longer to post this than it did to actually get it working in the first place. ;) It's possible I missed a step in here somewhere, since I had made a few other attempts
before I found the 'changed' file, so I could have possibly twiddled another bit somewhere that was necessary that I don't remember. Should be a good start tho.
I haven't tested it out fully by any means but it shows up in the 'View > Other Windows' list, it opens up just find, and it looks like Intellisense is working too. Good luck and great code to all! :)
--- Chelle L.

Similar Messages

Have Infopath form interact with Sharepoint 2013 Workflow

Situation
I am working on a system having the user fill-in a sequence of list-forms. Form 1 initiates form 2 after closing, Form 2 initiates form 3 after closing etc. This is done by altering the Source= part of the form URL
Form 1 fills list 1 and initiates a workflow to update some fields. This is to prepare some data for form 2. This data is stored in a temporary list
Form 2 fills list 2 gets data from the temporary list and initiates a workflow to update some fields
Problem
When the second form is started, the workflow of the first is not finished yet. In that case the second form uses the wrong data from list 1.
I want to have form2 waiting for a status update on the first workflow so that the correct data is transferred from form 1 to form2
Question
How can I delay the presentation/update of a form based on a status of a list workflow. I want to use out-of-the box techniques and avoid program code

No, you cannot submit form values of a acrobat to SharePoint. You can use list form for basic form, else try using jquery to build custom forms as an alternative for infopath. Refer to the following codeplex solution. You could use this or build one similar
to that using the source code.
http://forms7.codeplex.com/
--Cheers

SP2013 and Project 2013 - project files open in read-only mode with no options to edit only Save As

Hi all,
Environment:
SharePoint 2013 (15.0.4420.1017) RTM
Windows 8 - Project 2013 (15.0.4433.1506) 32Bit
Issue details:
When opening .mpp files stored within SharePoint they are opened successfully within Project 2013 however they are opened in Read-Only mode with no options to edit/check out only Save As. The
same outcome is experienced if you click the document link within SharePoint or you chose to edit from the document menu.
Opening the file through windows explorer also opens only in read-only mode.
To date we’ve tested the following
Windows 7 – Office 2010 = working as expected
Windows 8 – Office 2010 = working as expected
Windows 7 – Office 2013 = opening as read only, no prompt to edit
Windows 8 – Office 2013 – opening as read only, no prompt to edit
Current thinking is that it is an issue with either the SharePoint Office Documents Class ActiveX control or Project 2013 itself interacting with SharePoint 2013.
We have tested this in multiple SP2013 environments with the same outcomes.
The workaround therefore is to save locally and then upload again which is not ideal.
Unable to find an exact issue match to this.
Any help with this appreciated.

Hi Dan,
For us after investigating this further it was found that using the document menu to edit or checkout and then edit results in the project file being opened in read-only mode.
The same issue was present for Visio files.
Using the FILES ribbon menu results in the document being opened in edit mode successfully in both Project and Visio.
Please note that we found that this issue only exists within document libraries where checkout is required to edit which was our case. If checkout is not required the document
menu can also be used as expected.
Cheers,
Dan

Sharepoint programmaticaly add list item under current user - 0x80070005 (E_ACCESSDENIED))

Please help me.
In our company, we developed an application under the Apple device to work with the company's internal services , including it in this application it is possible to send messages to the corporate blog portal, which is deployed on Sharepoint 2013 .
The application architecture is as follows:
Server on which you installed Sharepoint 2013 is called "SPS01", on the same server is deployed on IIS web application called "WS",
application "WS" taken in a separate application pool from Sharepoint 2013 .
All Apple client devices communicate with Sharepoint 2013 through the web application "WS". For us it is important that when applying for Sharepoint 2013 with mobile
devices, Apple remained the security context of the authenticated user, as access to documents stored in Sharepoint 2013 demarcated .
For what would be maintained security context authenticated users , we applied techniques such as impersonation and kerberos .
Request goes like this:
Apple client connects to the Web application "WS", on the "WS" configured
to connect to Kerberos enabled and impersonation . (Apple iOS 7 support kerberos ) , then all customer interaction with Sharepoint 2013 going through "WS". Kerberos
we use that to get rid of the problem of "double hopes" that occur when a web application "WS"
refers to the other network resources that are beyond the server "SPS01".
Example:
Web application "WS", which is on the server "SPS01", refers to a
file server «FS01», to get a list of documents from the usual file balls through kerberos and impersonation request comes on «FS01»
from the user who is authenticated by web application «WS».
But there was a problem:
If the user enters the Sharepoint 2013 through the browser on your computer, it can successfully keep there blog post .
If the user is drawn to Sharepoint 2013 from a mobile device Apple, and tries to leave a message in the blog , the error appears : Access Denied. Exception: Access is denied.
(Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Empirically by the following was revealed: I tried to give you a right to - it did not help:
Administrator farm
SQL database config and content - owner
Administrator of User Profile Services
Local Administrator
BUT!
When deploying Sharepoint 2013 group was created security domain - "domain \ farm_administrators" - which is in the local group Sharepoint 2013 - "Farm
Administrators" If the user is included in the domain security group - "domain \ farm_administrators", then the user can successfully keep a blog
post from a mobile device Apple.
I want to note that this happens only through security group AD «domain \ farm_administrators»
The question is, how can you determine what rights the special security group "domain \ farm_administrators" in Sharepoint 2013 , whereby the participants can successfully
send messages to the blog with Apple mobile devices via the web application "WS".
We also found a workaround , but it will not work as we would like.
RunWithElevatedPrivileges
http://msdn.microsoft.com/en-us/library/bb466220.aspx
We can execute a part of the Web application "WS" with the highest privileges. In this case, the user was able to successfully send a message to your blog from your
mobile device Apple.
But when the code runs with the highest privileges - lost the security context of the authenticated user.
In the author is shown as "System Account"
public static XmlDocument addBlogMessage(string projectID, string text)
XmlDocument response = new XmlDocument();
string result = string.Empty;
string webUrl = SPUrlUtility.CombineUrl(Constants.SITE_URL, projectID);
using (SPSite site = new SPSite(webUrl))
using (SPWeb web = site.OpenWeb())
SPList blogMessagesList = web.GetList(SPUrlUtility.CombineUrl(webUrl, Constants.BLOG_MESSAGES_LIST_URL));
SPListItem newBlogMessage = SPUtility.CreateNewDiscussion(blogMessagesList, "Сообщение");
newBlogMessage[SPBuiltInFieldId.Body] = text;
web.AllowUnsafeUpdates = true;
newBlogMessage.Update();
web.AllowUnsafeUpdates = false;
result = "<response><userResult><code>Success</code><messageID>" + newBlogMessage["ID"].ToString() + "</messageID></userResult></response>";
response.Load(new System.IO.StringReader(result));
return response;

Yes I make sure that the assigned field is filled as the workflow will not work unless that field is filled with a valid username.
I am an administrator on this SharePoint site and I am using several people to email to that are not admins on the same site.
The issue seems to lie in the Workflow itself. In the one step that I have "Send an email" you fill out what should go in the To: field in the email. That is where it should say "Current Item:Assigned To" according to all the documentation I
have read and what mine will only enter in the To: field is "Assigned To" only it is missing the key first part of where to look. Even though when I go through the steps I have indicated that it the data should be found in the Current Item from
the field of Assigned To and to return the information of email address, which is well with in the realm of this Action in Workflow.
I have been able to accomplish this in another workflow that is not meant to be Reusable and is tied to one list only. This seems to only be an issue when trying to do this in the Reusable Workflow creation and execution and when I use the Association
Columns.
Any further ideas or suggestions? Any would be appreciated.
Regards,
Lara K.

Host Header Site Collection and Web App Setup - Thoughts

I am trying to understand relation between AAM and web app extension .Please share your expert opinion. I have not seen any TechNet article talking about it clearly.
Here it goes: in 2010 it was recommended Not to use AAM with IIS bindings without extending the web application. This was mentioned in several TechNet articles also its a known “Mistake #4” on TechNet articles.
So question is, is that still the same case in 2013?
Most of the times it is recommended to remove web app host header from IIS if you are using this web app for HHSC, otherwise sites will not be accessible. I have find no issues by leaving web app host header and adding more bindings for host header site
collections any thoughts on this ?
Thanks.

Hi,
I found some articles for helping understand Extend web application and
Alternate access mappings.
“If you want to expose the same content in a Web application to different types of users by using additional URLs or authentication methods, you can extend an existing Web application into a new zone. When you extend the Web application into a new zone,
you create a separate Internet Information Services (IIS) Web site to serve the same content, but with a unique URL and authentication type. An extended Web application can use up to five network zones (Default, Intranet, Internet, Custom, and Extranet). For
example, if you want to extend a Web application so that customers can access content from the Internet, you select the Internet zone and choose to allow anonymous access and grant anonymous users read-only permissions. Customers can then access the same Web
application as internal users, but through different URLs and authentication settings..”
After you extend web application, there is a new site created in IIS but the content are the same. We extend it to a new zone for different authentication methods, so that we could support different security between Internet site, Intranet site and Extranet
site.
“Alternate access mappings direct users to the correct URLs during their interaction with SharePoint 2013. Alternate access mappings enable SharePoint 2013 to map web requests to the correct web applications and sites, and they enable SharePoint 2013 to
serve the correct content back to the user.”
AAM is to offer different urls to users to access one site. Sometimes the url of a site is not easy to remember , we could use AAM to create simple url.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How can we integrate Datawarehouse to Microsoft sharepoint ECM?

hi,
how can we integrate Datawarehouse to Microsoft sharepoint ECM??
what is oracle product & toll that support it.
Regards,
AMSII

Hi,
According to your description, you might want to integrate with JUKEBOX API and P4A Systems to SharePoint 2013.
I would provide some suggestions about how to access the data of SharePoint, for the JUKEBOX API part, as it is not supported in this forum, I would suggest you find
the related resource in the corresponding forum.
For about how to interact with SharePoint 2013 programmatically, the links below would be helpful:
SharePoint 2013 .NET Framework client object model (CSOM)
http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
Other APIs available:
http://msdn.microsoft.com/en-us/library/office/dn268594(v=office.15).aspx
Best regards,
Patrick
Patrick Liang
TechNet Community Support

SCORM timestamp issue

Hi there,
I've been having issues with multiple quiz attempts and interactions not all being sent to the LMS. Most answers are sent though randomily LMS drops couple of answers on each re-attempt of the quiz yet each question is set to report the answer. It also doesnt appear to occur on first attempt only new attempts after first failed. LMS provider says this is a timestamp issue in the course which doesnt send it incorrect SCORM format therefore it rejects it when the same interaction id is already there from previous attempt failed. Below is the error from LMS. Please anyone advise how this might be corrected inside Captivate.
[11:05:25.897] SetValue('cmi.interactions.29.timestamp', '2013-09-13T11:05:25.0+00:60') returned 'false' in 0.001 seconds
[11:05:25.898] GetLastError() returned '406' in 0 seconds
[11:05:25.899] GetErrorString('406') returned 'Data Model Element Type Mismatch' in 0 seconds
[11:05:25.900] GetDiagnostic('') returned 'The cmi.interactions.29.timestamp value of '2013-09-13T11:05:25.0+00:60' is not a valid time type.' in 0 seconds

Im using captivate 6

Recent Bootcamp update

So I just installed the recent update for Bootcamp and my whole screen has gone slightly soft. This is very, very annoying and I want my screen to look how it did not two seconds ago. When Windows was booting up it looked just fine, the screen went black and when it came back it had this soft look. Please someone help.
I'm running Windows XP on a Macbook.

I have investigated this bug furthermore, and read many forums. At the end, I am suspecting some bad interaction between these two W7 updates, and Kaspersky Internet Security 2013.
I have :
- set my network connexion to "automatic", in order it could be active duiring the "reboot / finishing installation" phase after W7 update
- disactivated KIS 2013, and set the preferences in order it does not launch automatically during W7 boot.
Then I installed the first suspected KB "infrastructure user-driven ...". After W7 reboot, no bug (bleu screen) during copying a file from the OS X partition towards the W7 partition. Then I reactived KIS, and reboot, some tests, no bug either.
I did then the same procedure with the other suspected KB "insfrastructure kernel-driven ...". Same thing. No bug after reboot. Then I reactived KIS and reboot, no bug either.
Hence it seems that Bootcamp in not the culprit, at least not by itself alone. Maybe only in combination with these two W7 updates, and with KIS 2013.
Nevertheless, it's much more probable that there is some bad interaction between KIS 2013 and these two W7 updates. Performing these updates with both KIS 2013 disactivated (and not launched at boot), and the internet connexion set on "automatic", seems to prevent the problem.
I need to perform some more intensive tests, but the bug seems to have disappeared, or at less is became fal less frequent.

Bug between bootcamp and recent W7 update ?

Hello,
I have a Mac Pro with several hard drives, one being partionned:
- Snow Leopard 10.6.8 kernel 64 bits
- Window 7 64 bits, bootcamp 3.3
This configuration has been running perfectly since more than 24 monthes, even with all the W7 updates.
Today I installed some recent W7 updates, several dealing with .NET or IE, and two with so-called 'driver architecture V1.1'.
After this update, being loggeg on W7 partition, when I try to copy a file from the OS X partition to some folder on the W7 partition, I have regurlarly a crash of W7 with a blue screen. I never had that before.
I tried to uninstall the two W7 updates dealing with this pilot architecture V1.1, one is named 'kernel-driven ....', and one is named 'user-driven ...'. After removing these txo updates, everything is OK again. I was able to copy many files from OS X to W7 without crash or blue screen.
Hence I suppose there is some bug between the Apple bootcamp drivers, especially the one which allows to mount and read HFS+ partitions, and this W7 update.

I have investigated this bug furthermore, and read many forums. At the end, I am suspecting some bad interaction between these two W7 updates, and Kaspersky Internet Security 2013.
I have :
- set my network connexion to "automatic", in order it could be active duiring the "reboot / finishing installation" phase after W7 update
- disactivated KIS 2013, and set the preferences in order it does not launch automatically during W7 boot.
Then I installed the first suspected KB "infrastructure user-driven ...". After W7 reboot, no bug (bleu screen) during copying a file from the OS X partition towards the W7 partition. Then I reactived KIS, and reboot, some tests, no bug either.
I did then the same procedure with the other suspected KB "insfrastructure kernel-driven ...". Same thing. No bug after reboot. Then I reactived KIS and reboot, no bug either.
Hence it seems that Bootcamp in not the culprit, at least not by itself alone. Maybe only in combination with these two W7 updates, and with KIS 2013.
Nevertheless, it's much more probable that there is some bad interaction between KIS 2013 and these two W7 updates. Performing these updates with both KIS 2013 disactivated (and not launched at boot), and the internet connexion set on "automatic", seems to prevent the problem.
I need to perform some more intensive tests, but the bug seems to have disappeared, or at less is became fal less frequent.

MDOP 2013: App-V 5 SP2 Application Publishing and Client Interaction Guide Now Available

Hello App-V forum users,
Do you want to understand the details of how App-V publishes and runs applications? See
this Springboard Series blog post, which describes the newly available App-V 5 SP2 Application Publishing and Client Interaction Guide.
Enjoy!
-Tony
IT Pro Audience Manager for Web Forums

Hello,
I am truely confused by how you are attempting to achieve things.
1. The Office 2013 package is only supported if deployed globally
2. AppLocker is the way to restrict users from starting different applications
3. Office 2013 is not supported to be published to users
It seems you have issues with #3. Which is not supported. I am not saying it "doesn't" work, but considering you have issues with it - perhaps we can start by not doing it?
Ok, so what do we have left;
Per your statement, Office 2013 is published globally. Ergo, all shortcuts and applications should be available to all users.
Is this true?
Nicke Källén | The Knack| Twitter:
@Znackattack

Having issues viewing interactive parameters and group tree in Visual Studio 2013 design view.

Hey Guys,
I'm a web developer (front end and back end, kind of a one man army sort of deal) and my current employer wishes to use crystal reports to display the results of the online survey apps/tools I have been working on for the last few months. However, I have been having trouble getting the reports to render in browser, and a lot of the ui components of the browser based report viewer (the interactive parameters and group tree) will not render properly in the design view of visual studio (ive attached a screen cap of what I'm talking about) or in the browser itself.
I am new to crystal reports and its community and if I am leaving out any critical details or have posted in the incorrect section please inform me and I will make changes as necessary.
Additional info:
Visual studio version: 2013 professional (trial)
Plugin version (exe file name): CRforVS_13_0_9.exe (I also installed the 64 bit run-time from this)
Server and OS versions: IIS 7.5 on Microsoft Windows Server 2008 R2
Any help you guys could provide would be greatly appreciated.
Cheers,
-Mike

Hi Mike
First thing you want to do is uninstall CRVS SP 9 and install CRVS SP 10. SP 10 is the first SP to support VS 2013.
Once that is done, let us know if that helped any.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to create a Real Time Interactive Business Intelligence Solution in SharePoint 2013

Hi Experts,
I was recently given the below requirements to architect/implement a business intelligence solution that deals with instant/real data modifications in data sources. After going through many articles, e-books, expert blogs, I am still unable to piece the
right information to design an effective solution to my problem. Also, client is ready to invest in the best
infrastructure in order to achieve all the below requirements but yet it seems like a sword of Damocles that hangs around my neck in every direction I go.
Requirements
1) Reports must be created against many-to-many table relationships and against multiple data sources(SP Lists, SQL Server Custom Databases, External Databases).
2) The Report and Dashboard pages should refresh/reflect with real time data immediately as and when changes are made to the data sources.
3) The Reports should be cross-browser compatible(must work in google chrome, safari, firefox and IE), cross-platform(MAC, Android, Linux, Windows) and cross-device compatible(Tabs, Laptops &
Mobiles).
4) Client is Branding/UI conscious and wants the reports to look animated and pixel perfect similar to what's possible to create today in Excel 2013.
5) The reports must be interactive, parameterized, slice able, must load fast and have the ability to drill down or expand.
6) Client wants to leverage the Web Content Management, Document Management, Workflow abilities & other features of SharePoint with key focus being on the reporting solution.
7) Client wants the reports to be scalable, durable, secure and other standard needs.
Is SharePoint 2013 Business Intelligence a good candidate? I see the below limitations with the Product to achieve all the above requirements.
a) Cannot use Power Pivot with Excel deployed to SharePoint as the minimum granularity of refresh schedule is Daily. This violates Requirement 1.
b) Excel Services, Performance Point or Power View works as in-memory representation mode. This violates Requirement 1 and 2.
b) SSRS does not render the reports as stated above in requirement 3 and 4. The report rendering on the page is very slow for sample data itself. This violates Requirement 6 and 7.
Has someone been able to achieve all of the above requirements using SharePoint 2013 platform or any other platform. Please let me know the best possible solution. If possible, redirect me to whitepapers, articles, material that will help me design a effective
solution. Eagerly looking forward to hear from you experts!.
Please feel free to write in case you have any comments/clarifications.
Thanks,
Bhargav

Hi Experts,
Request your valuable inputs and support on achieving the above requirements.
Looking forward for your responses.
Thanks,
Bhargav

Lync 2013 problem with interaction in Hyper-V

Hello,
during the conference in Lync 2013 does
not work the guest interaction service,
which has been referred to the control
(display the
desktop). The
guest can move the
cursor, but
can't click or
write in Hyper-V virtual
machine. In
a virtual machine running Windows Server 2012R2. Enhanced VM Interaction is
on.
What to do to give away full
control for the guest?

I may be confused, but it looks like you're trying to control a server VM with this capability. Do the actions require elevated or administrator access? If so, by security design this won't work.
"It is worthwhile mentioning that people who you gave control to in a desktop sharing session will not be able to interact with elevated prompts."
The article below mentions this, and suggests running as Lync as administrator which we've not had great success with.
http://blogs.technet.com/b/lync/archive/2012/11/02/presenting-your-screen-in-lync-2013.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Interactive Ratings to Search in Sharepoint 2013

Hi All,
I need to display ratings in Search results page .Can anyone please help ???
Vinod

Hi,
Here's an advanced post which makes them interactive as well, http://almondlabs.com/blog/adding-interactive-ratings-to-sharepoint-2013-search-results-part-1/.
The crux is to add the AverageRating property to your display template, and then render data based on the value.
Thanks,
Mikael Svenson
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

How to implement an interactive Outlook 2013 calendar into a Adobe Muse web page?

I am trying to implement an interactive Outlook 2013 calendar into a Adobe Muse web page.
Any input on this subject is greatly appreciated!
Thanks,
FT

I would also like to do this as well for our company intranet page...

C# Interactive in VS 2013

Similar Messages

Maybe you are looking for