C0pying an ESS transaction and customizing ess transaction through PFCG

Hi all,
   I need help in copying a ITS ess transaction into a z transaction.
Ex:  I am trying to copy PZ03  into ZPZ03. I am not sure whether i can just copy  transaction pz03 to zpzo3. Please help me in how to copy a ITS transaction into a new Z transaction and if i wanna do some core modifications how can i do that.
And i think i can hide some buttons...without copying ITS ESS transaction through PFCG. Please help me in this too.
Thanks,
Kranthi.

Hi Michael,
Does your problem still persist? Do you have new information regarding the problem?
If the problem is solved: Please mark this thread as answered. Thank you!
Best regards,
Henning.

Similar Messages

  • How to get Capacity And Custom Attribute Data Through Powershell

    how to get Capacity And Custom Attribute Data Through Powershell

    Hi Nitesh,
    Great command from Martin.
    Also find a article to configure the Quota:
    http://technet.microsoft.com/en-us/library/aa998353(v=exchg.141).aspx
    Thanks
    Mavis Huang
    TechNet Community Support

  • To update vendor and customer details in BP transaction

    I have created a donor in the BP transaction . i need to update the vendor and customer details for the reated donor.
    please can someone suggest some BAPI's or FM's which are available to do the same.

    Hello Om,
    You can get vendor/costumer number and their names in FBL3N when you get bank ledger's line item.
    You must use BTE functions.
    I don't your techinal skills about SAP but if you don't know ABAP or ABAP dictionary details, you can get help your ABAPer.
    I will explain step by step.
    First of all, if you don't use BTE before, You must create a product on FIBF.
    Call FIBF transaction -> Settings -> Products -> ...of a customer
    Create a new line,
    Product : ZFI
    Text : BTE Products for FI Exit
    Product active : tick check fro activation.
    Then you must call SE11 for structure RFPOS.
    You must use append structure function for this structure and you can define ZFI_RFPOS append structure.
    Define 4 fields.
    Component : KUNNR - Component type : KUNNR
    Component : NAMED - Component type : NAME1
    Component : LIFNR - Component type : LINFR
    Component : NAMEK - Component type : NAME1
    Then save and active your RFPOS structure.
    After that, you must do same step for structure RFPOSX.
    Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
    After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very very important;
    E_POSTAB = I_POSTAB.
    Then you should add some ABAP code for getting customer & vendor details.
    I give you some examples, you can use it. (next message on this thread, please check)
    Then save and active FM.
    Call FIBF transaction again.
    FIBF -> Settings -> Process Modules -> ...of a customer
    Define a new line.
    Process : 00001650
    Function Module : ZFI_INTERFACE_00001650
    Product : ZFI
    and this customizing.
    Then you go to SE38 transaction.
    start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
    After those operations, you can see customer/vendor code and their names on FBL3N.
    I hope it helps to you.
    Regards,
    Burak.

  • OBYA : vendor and customer clearing in cross company code transaction

    Hi Gurus,
    Please can any one telll me how to clear the transactions of cross company code which is in vendor and customer.
    I already done a configuration in OBYA for customer - vendor.
    Expected a process of clearing the cross company code transaction.
    Thanks in Advance
    Manish.

    Hi,
    If you are doing for vendor invoice,
    for example:
    co code 1000 and co.code2000
    Use F-02 and enter following transactions
    posting key 31 -vendor- company code 1000
    posting key 25- expenses and enter new company code 2000.
    After the entry it will display 4 line items, 2line item for 1000&2000
    Regards,
    Sreekanth

  • Std ESS and Custom Workset work together

    Hi,
    At a time, can i have Std ESS and Custom Workset for ESS work?
    The navigation is not happening properly. When i click on a service in the custom workset, it navigates to Std. I can modify the pcd of each page and make this work fine, it's affecting the std,why?
    I am making changes in Change Entries and not in Add Entries for the Page resource
    but is this the right procedure?
    To my userid i have the custom as well as the std role assigned.
    Have hidden services from SPRO.
    My purpose is to check the Std ESS and Custom ESS simultaneously.
    Am i following the right procedure?
    Please help.
    Regards,
    Remi

    My purpose is to check the Std ESS and Custom ESS simultaneously?
    First of all why you need two set of roles, If you are using your own role then have  a single
    custom role assigned to the user, why have multiple as it is being redundant,
    Its better to have clear roles defined and assigned!

  • Profit centerwise Vendor and Customer line items view

    Deal ALL,
    We have not activated Business Area.
    We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
    Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
    Request you all to reply.
    Thanks & Regards,
    Bhadresh

    Hi
    Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
    Assign Points if useful
    Regards
    Sanil

  • Impacts in COPA of changing material and customer master data

    Dear experts,
    In my company we are considering following scenario:
    Currently mySAPerp 6.0 is implemented for all modules for the mother company.
    We have developed a new global template where there are significant changes versus the existing system, especially in the SD processes. Material and customer master also change significantly in terms of content in the tables/fields and/or values in the fields.
    The idea was to build the template from scratch in a new machine and roll-out all group affiliates, but now we are considering the possibility of making an evolutionary of the current system and try to stretch it to the processes defined in the global template.
    The scenario we want to analyze is: Keeping same organizational structure in terms of Company code, CO area and Operating Concern in existing SAP client and make an evolutionary of the existing settings to the global template processes.
    The doubts we are having are the following:
    Changing material & customer master data: Impact in COPA
    Option 1: Material master data and customer master data codes are maintained but content in the tables/fields is changed substantially, both in terms of logical content of specific fields and/or the values in the specific fields. We have following examples of changes.
    Case 1: source field in material master changes logical content. E.g. Material master field MVGR1 is currently used for product series (design line) and the content changes to be the Market Segment. The product series will be moved to a classification field. At least 5 other fields are affected by this. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
    Case 2: the source field is not changed so that the logical content of the field remains but the values change, i.e. for the same concept there will be different codifications. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
    Case 3: Characteristics where currently the source material master field is a Z field and the derivation is via table look up and where the Z field changes to a classification field. How can you convert the existing COPA line items to ensure that attributes are aligned? Should new characteristics be created or just change the derivation logic of the characteristic?
    Option 2: Material master data and customer data codes are re-created (codification of records is changed), meaning that new material and customer codes will exist and content in tables/fields is changed (as in option 1)
    Case: material and customer codes are changed. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
    Iu2019ve never phased a similar scenario and I fear that maintaining operating concern while changing source master data and also SD flows (we have new billing types, item categories, sales doc. Types, order reasons) may lead to inconsistencies and problems in COPA.
    I would like to ask you experts if you have come across a similar scenario and if from your experience, it is something feasible to do or there are many risks involved. What can be the impact of this scenario in existing Operating Concern for both option 1 and 2 and what would be the key activities to perform to adapt the existing operating concern. What will be the impact of the needed conversions on P&L reporting?
    Sorry for the long story. I hope you can help me out.
    Thanks and Regards,
    Eric

    Hi,
       First i think you will need to test if it works for new COPA documents created via billing.
      If it works fine then the issue is if you wish to apply these changes to the historical data already posted.
      Normally there are transactions like KE4S where you can repost the billing document to COPA
      However this may not be viable for bulk postings
      You can perform realignment (KEND) but this only works at the PA segment level (table CE4XXXX)
    regards
    Waman

  • Bapi For creation and change for Vendor Master and Customer Master

    I am looking for BAPI to create and change  Vendor Master and Customer Master which will not take me to standard SAP transaction but will work in the background
    Explanation: BAPI to delete material (BAPI_MATERIAL_DELETE) take you to standard SAP screen of T-Code MM06  but BAPI to create material (BAPI_MATERIAL_SAVEDATA) creates material in the background i.e. does not take you to standard SAP screen of T-Code MM01
    So in my case (i.e. to create and change  Vendor Master and Customer Master ) I want BAPI which would work like BAPI to create material (BAPI_MATERIAL_SAVEDATA)

    For general information,to find BAPIs associated with any business object :
    Transaction : BAPI - choose alphabetical tab - Find customer - (right side choose - tools - create bapi list and search ) , you will get all the BAPIs associated with this particular business  object
    Mathews

  • Vendor and customer master creation

    Hello, for my client most of the time the same customer works as a vendor too. so they want to automate the creation of customer and vendor master records simultaneously. Basically the requirement is to enter the data for vendor master and use the same data to create customer master with out using 2 tcodes XD01, XK01 and enter the data in 2 places.
    Any suggestions are appriciated.
    Venu.

    Hi,
    If this is a manual entry, it is not possible with in SAP, they would have to use trwo different transactions.. Moreover the data cannot be same as they are opposites.
    You can add teh vendor # in the customer master and Customer # in the vendor master.. that's be all that you can do.
    even if you were to use LSMW or a Winshuttle to upload data, tehformat would still be different. so this is not possibel as far as I know

  • Gl, vendor and customer balances in program

    I need to upload GL, Vendor and customer balances in single program(bapi or normal recording also.). If any body is having code for this and any thread is available please help me .. urgent...
    Thanks inadvance
    praveen

    The Ope item balances may be taken adn clean the data.
    For AP some clients curt the check and release it later .
    If that is the case no need to load AP items,Agian this is depend on the business arrangemnets.
    The data may be loaded FB60, FB70 transactions.The transaction may be recorder and use LSMW
    Create a GL account ( data conversion acccount)
    Customer:
    Dr Customer
    Cr Data convertion accounmt
    Vendor:
    Dr Convertion Account
    Cr Vendor
    The data collected in Xl may be converted as Tab delimited Txt file and may be used for LSMW.
    Hope this is clear. Allot the points if you get some resolution for yr doubt.
    Chitras

  • Difference in the Balance between FS10N and Customer Balances in Local Curr

    Hi,
    When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
    Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
    What could be the possible reasons for the differences..
    Thanks

    Hi Varshani,
    Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
    SAPF070  - Compare Documents and Account Transaction Figures
    Description
    This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
    A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
    After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
    Output
    The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
    Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
    If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
    SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
    Description
    If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
    Requirements
    All of the following listed requirements must be fulfilled:
    1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
    2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
    3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
    4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
    5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
    Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
    You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
    It is advisable to execute a test run first, which will list any differences that are found.
    Further notes - Authorizations
    Repair program authorization group (F_005)
    Company code authorization         (F_BKPF_BUK)
    Thanks
    Venkata Ganesh Perumalla
    Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

  • Trading partner in GL, Vendor and Customer master

    Hi
    This is with reference to the clarification on field Trading partner in GL, vendor and customer master
    We have 10 company codes and are using same COA in all co codes
    We have activated Enterprise Consolidation in system and interunit profit elimination exist in our case.
    Please clarify the following:-
    1) Is there any impact on consolidation module if we did not maintain trading partner in GL master, vendor master & customer master
    Thanks & Regards
    D D Asnora

    HI
    It will effect in Interunit eliminations. and all the transaction which occured betweeen inter-units will be effected.
    regards
    Hari p

  • Clearing Vendor and Customer through F.13

    Hi.
    I was wondering if you can configure the vendor and customer masters so that they can be cleared automatically through transaction F.13. Currently this process is done through either F-32 or F-44 but this takes a lot of time.
    I would like to know if you can choose a vendor on F.13, a corresponding supplier and then clear them. I have run some tests but they have not been successful
    Is there any way to achieve this?
    I would appreciate detailed steps if there is a way to do this.
    Thank you very much,
    Borja.

    Hi Sunny,
    Please see the following :
    1. Down Payment Received (2500 INR.) F-29
    2. Customer Invoice Posted (2500 INR.) FB70
    3. Clear Down Payment (2500 INR) F-39
    4. Now Run Automatic Clearing (F.13)
    And then check the Customer line item report in FBL5N. It will clear both line items.
    Hope this helps.
    Kind Regards,
    Prakash Kumar

  • Tcode for Vendor and Customer Trial balance

    Hi,
    I want to generate Vendor trial balance & customer trial balance. I want name of each vendor and customer with the normal and special GL balance written against it
    Ex:
    Vendor A     -    Rs.100-
    Vendor B     -    Rs. 2300-
    Vendor C     -    Rs. 1000
    Total -- XXXXX -
    > This should match with my Vendor Reco account total.

    If standard report does not suffice your requirement, then create your own.
    FOR vendor USE K in transaction code instead of D.
    Hello,
    The following example I have given is for customers.
    The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
    For Customer you go to FDI4, for vendor you go to FKI4 for forms.
    Remaining all are the same.
    Hello,
    Go to transaction code FDI4
    Select Form Type RFFRRD20 Line item analysis
    Give your form name and description
    Structure (Two axis) - as defaulted
    Click on Create
    You will have lead column
    Delete the rows 2, 3 and 4
    Double click on column 1
    Enter the customer numbers from 1 to 999999
    First column double click (A)
    Slelect following values
    Due date analysis 1
    Days for net due date 0 to 30
    Give the short name, medium name and long text for the column.
    Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
    Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
    You prepare one more column with
    Due date analysis 2 (G)
    Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
    Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
    Characteristics you need to select are
    Account Type (Select Account Type as D for customers)
    Currency
    Customer
    Document Type
    Special G/L Ind
    Company Code
    Change the output types and options according to your requirement.
    Refer FDI2 and FDI3 for other standard reports created.
    Refer FDI5 and FDI6 for other standard forms created.
    Save your report and execute.
    Regards,
    Ravi

  • Standard and Customer Tasks

    Hi Experts,
    What is the main Difference between standard and customer taks.
    Both are created using transaction PFTC.
    So what is the significance of Standard Tasks.
    Thanks,
    Points will be rewarded for all helps.

    SAP documentation states the following differences between standard and customer task
    Standard Task:
    Cross-client, any plan version, no validity period
    Customer Task:
    Client-specific, plan version-specific, validity period
    They have also mentioned
    "To implement your own requirements, use only standard tasks. There will no longer be functional enhancements for customer tasks."
    So preferable to use Standard tasks for all developments..
    Thanks & Regards,
    Prasath N

Maybe you are looking for