C410a network setup - install software hangs when getting to installing software stage WinXP

I have a new C410A. I have connected it ONLY to my wired network (not USB or wireless). Every time I try to install the PS_AIO_07_C410_FSW_Full_Win_enu_140_222.exe software (complete or just the drivers) to Windows XP Pro 32-bit, the software starts to install, but then just goes dormant forever and never finishes the "installing" stage. I have waited 30-40 minutes. I used Process Monitor sysinternals tool and saw NO CPU usage or disk I/O once it got to "Installing software".
Once it is in this state, I cannot launch other programs. I still have control and can "close" programs, but it takes a long time.
I had closed/terminated as many programs/processes as possible before installing. I had disabled Norton AntiVirus. It doesn't matter. The same problem occurs.
When installing, I had the printer turned on and connected to the network before and during the install.
I am able to login to the printer over the network (although there were a lot of java-related errors). So I know the network and connection is good.
I just cannot get the software to install. Any ideas?
(stages shown in program's UIF)
v System check complete
v System preparation complete
> Installing software
(from Process Monitor display when software is hung up)
hpzstub.exe      PID 3464
hpzsetup.exe          4772
hpzsetup.exe         5384
   hpzrcv01.exe         5976

Have you gone through this: http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=33058&tmp_task=solveCategory&cc=us&d...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Query hangs when getting apps schema objecs(Ebs R12) objects from BO Designer

Hello Guys,
We are facing an issue on Production instance that the query given by BO support hangs when getting the objects from apps schema by login from BO designer.
We are able to get the objects from Ebs 11i instance with the same query. Below is the instances details for Ebs 11i and R12.
Ebs R12 Application Version     : 12.1.3
Ebs R12 DB Version                 : 11.2.0.3
Ebs 11i Appl Ver     : 11.5.9
Ebs 11i DB Ver       : 9.2.0.5
Below is the query.
SELECT NULL, u1.owner, u1.object_name, u1.object_type, NULL
    FROM all_objects u1, role_tab_privs rtp, all_tab_privs atp
   WHERE u1.object_type IN ('TABLE', 'VIEW', 'SYNONYM')
     AND u1.object_name LIKE '%' /* Type selection : can be empty */
     AND u1.owner = rtp.owner(+)
     AND u1.object_name = rtp.table_name(+)
     AND u1.owner = atp.grantee(+)
     AND 'SELECT' = atp.PRIVILEGE(+)
     AND u1.object_name = atp.table_name(+)
     AND u1.owner = 'APPS' /* Owner selection : can be empty */
UNION
SELECT   NULL, asy.owner, asy.synonym_name, 'SYNONYM', NULL
    FROM all_synonyms asy
   WHERE asy.synonym_name LIKE '%' /* Type selection : can be empty */
     AND asy.owner = 'APPS' /* Synonym Owner selection : can be empty */
ORDER BY 4, 2, 3;
Please help me out as it's very urgent. As users are unable to do transaction.
Thanks
Khan

Any update experts on this issue please

N73 hangs when getting incomin call

Some times my phone switches off or hangs when getting a incoming call, i formatted still the problem persists, any solution ? The same with 2 of my friends N73

yup, 3D tones have some problems with the ring tones...turning it off solved that for me...

Mail hang when getting email from multiple POP accounts

I'm posting this issue again.
Mail hangs while getting new mail from multiple POP accounts almost every time. When it does, only Force Quit can quit it.
The following DID NOT fix the hang:
- Reconstructing all mail boxes
- Exporting, deleting and reimporting all mail boxes
- Disabling all rules
- Deleting anti-spam history
- Deleting all emails from all mail boxes
Testing each POP account individually while putty the other two offline works fine.
I also noticed that sometimes the new mail counter in Inbox displays 2-4 new messages while there is no new ones. Switching boxes/folders and back to Inbox fixes it.
The POP accounts are:
One plain text POP
One secure POP
One GMail POP
Can anyone help?

You’re welcome.
I did try to clear the junk mail preferences
The Junk Mail preferences cannot be “cleared”. What do you mean?
it crashes almost every single time.
It doesn’t crash (i.e. quit unexpectedly). It freezes (i.e. becomes unresponsive), right?
I transfered my data to a Mac Mini. I had the same exact problem on it too!
so it seems it has nothing to do with the OS plugins or the setup I have.
Well, that would depend on what exactly does “I transfered my data” mean...
Try first disabling all the rules in Preferences > Rules AND the junk filter in Preferences > Junk Mail. If the problem persists, proceed as follows.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all the mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

IPad Hangs when loading latest software

Hi,
Plugged in my iPad to my Macbook yesterday to charge it up and got a message saying there was a software update. I accepted and the software install hangs when about 95% complete. Tried it about 6 times now always the same result.
Is anyone else having this problem? any ideas how to get my iPad working again.
The restore function doesn't work as the only option you can select is restore and update software and it seems to be the latest software that is hanging.
Thanks
Steve

Delete the update file from "Library/iTunes/iPad Software Updates" which forced it to re-download the update.
enjoy your magic machine

I get the error the feature you are trying to use is on a network resource that is unavailable when trying to upgrade iTunes

I get the following: the feature you are trying to use is on a network resource that is unavailable when I am upgrading iTunes

itunes64.msi
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

IMac G5 hangs when downloading and installing updates to 10.5

My iMac G5 hangs when I try to download and install the recent large update to 10.5. Message says restart to complete the installation, but after restart the messages says it is configuring the software, but progress bar shows no progress after several attemps, the longest being over 12 hours. Any ideas would be appreciated. Thanks, Bob.

Repair permission & restart your computer. Try reinstalling the OS update from the combo installer if you have not already done so instead of using Software Update.
If successful, make sure you repair permissions again after all installations are completed.

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

As a debugging step, try printing to the Adobe PDF printer. If that fails, repeat with print-to-file selected. Assuming the print succeeds, open the file in Distiller to complete the creation of the PDF. If you get the PDF, then check to see if AcroTray is properly working as a background task.

CMS gets hang when configure TACACS

Hi
I have stack of 2950 switches. I have configure tacacs for login security purpose. but i am facing problem when i open CMS web interface. I am succussfully get authenticated. but its get hang when Discovering network information dialog box comes. If you close that session and reopen again then CMS working fine. Problem is that when I configure Network Access restriction group device for specific user. Then it halt at Discovering Network information. I am using Cisco ACS 3.0. Following my switch config.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated.
The only problem is CMS application getting hang with tacacs configuration . My IOS ver is 12.1(14)EA1A. Please help its very urgent.

I could not find any bugs related to the issue you are describing. There was one problem where the username/password prompt was appearing again and again which had to do with misconfigurations. Do let me know if you find a solution.

My iMac hangs when installing Yosemite.

My iMac hangs when "installing on HD about 22 mins remaining" I did not check to see if this iMac can support Yosemite. What do I do now?

You can try using the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

Install hanging when registering automation server

I'm tearing my hair out, as well as getting my 4rse kicked by the other half!
We've had iTunes up and running on our Vista Home Premium box for a while, then it just stopped working coming up with an error.
So I've tried re-installing, but 7.3 keeps hanging when trying to register the automation server. Worst still I have to kill it with Task Manager and it leaves a partial install that refuses to uninstall!
Any guidance would be much appreciated.
Thanks,
Stuart

Registering Automation Server hangs are actually a 7.x.x.x thing rather than a 7.3.0.54 thing. I've seen them with 7.2.0.x too.
Perhaps try this strategy.
First download and then install the QuickTime standalone installer:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
If that install goes through properly, then try another iTunes install.
(The theory here is that if your QuickTime is already up to date, the iTunes installer bundle skips the QuickTime part of the install. If the iTunes installer is given less to do, sometimes it gets past the Registering Automation Server hang.)

Cisco Network Setup Assistant Unable to install the certificate on Android KitKat

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Hi, My Mac Mini 2006 early core Duo hangs when i try to connect wirlessly to ZyXEL VMG B Series i am using fresh install Mac OS 10.6.3 2Gb of RAM

Hi, My Mac Mini 2006 early core Duo
hangs when i try to connect wirlessly to
ZyXEL VMG B Series.
I am using fresh install Mac OS 10.6.3 with
2Gb of RAM.
The same issue when i try to hooked up with LAN cable.
Any tips and adviced will be very very welcome, thanks in advanced to everyone!

Hey there cutyscar,
It sounds like you are unable to connect to your router either by Wi-Fi, or ethernet. I would recommend trying the troubleshooting outlined in this article named:
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/ts1317
Start with this step, and work your way down as needed:
Check all cables and power supplies
Make sure all the cables related to the modem are plugged in and firmly inserted. This includes the modem's power cord, the cable from the modem to the computer, and the cable from the modem to the outlet. To be sure a connector is properly inserted, disconnect and reconnect it. Check to see if the cables have been cut, chewed, or otherwise damaged.
If you have any hubs or routers, check their cables and power supplies. If you have more than one power supply available for a type of hub or router, try swapping the power supplies. A defective power supply may affect network traffic.
Thank you for using Apple Support Communities.
Take care,
Sterling

I cannot connect to internet im getting the error message: no network adapter installed or configure

i cannot connect to internet im getting the error message: no network adapter installed or configured. what can i do?

Sherya, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
I believe that this is a problem for your ISP. Their Customer Service should be able to help you. There may be some settings that can be changed to solve the problem. They would know what the settings should be. I don't believe that it is a hardware problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

The blue bar hangs when I want to run software updates

the blue bar hangs when i want to run software update

If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

C410a network setup - install software hangs when getting to installing software stage WinXP

Similar Messages

Maybe you are looking for