Need to Re-activate CS4 after upgrade from Vista to Windows 7 (32 bit)

I have a laptop running Vista 32-bit with Lightroom 2.7 and Photoshop CS4 installed. I'm planning to upgrade the computer from Vista 32-bit to Windows 7 32-bit, upgrading in place to avoid having to reformat and reinstall all the software. Will Photoshop still be activated after the upgrade or will I need to re-activate it? If I need to reactivate, will the OS change make the activation process think the software has been moved to a new computer? It is currently activated on two machines (one of which is this laptop) as it is and don't want the activation wizard to think I'm putting it on third machine in violation of the license. Should I de-activate it before upgrading the OS and then re-activate once the system upgrade is complete? After the OS change I plan to upgrade the Adobe software to Lightroom 3 and PS CS5 - does the activation of CS4 even matter in that case? Anyone done a Vista->Win7 upgrade in place and offer any suggestions?

You are a brave man indeed, John.
An in-place upgrade is still a bad idea though.
-Noel

Similar Messages

Cleanup after upgrading from Vista to Windows 7

I have installed (upgraded from Vista) Windows 7 on my X301 machine. I am wondering if thedata on the drives Q(lenovo) and S(Servicev003) is still needed?

only if you want to recover to vista the Q partition is used for creating recovery disc the s partition is used for recovering to factory state which would be vista
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Pre7 after upgrade from Vista to Windows 7 (Ultimate 64bit)

I recently upgraded my Vista Ultimate (64bit) computer to Windows 7 Ultimate (64bit). This was an upgrade, not a clean, fresh install. Today is the first time I have tried to run PRE7 under Windows 7. Prior to the upgrade, I had no problems to speak of with PRE7 and the PhotoShop.com Plus account that I set up with it. Now whenever I start PRE7 under Windows 7, I get the "Install Full Content" dialog informing me that a reduced set of content has been installed and that I need to install the full set of content from the installation DVD. Now believe me when I say that the full set of content was installed under Vista and that I never got such a dialog box prior to Windows 7. In addition, after clicking OK to continue, the PhotoShop.com membership did not log on automatically as I am used to it doing. I don't remember exactly now what I had to do, but to the best of my recollection, after I logged on to my account it was telling me that I needed to verify my account, which I did. I subsequently received an email with a verification link in it. After clicking on the link my account was verified and now when I start PRE7, it automatically logs me on to my PhotoShop.com account, as I am used to it doing. I still get the "Install Full Content" dialog, though. I thought I would ask in this forum if anyone else has experienced these two anomalous behaviors after ungrading to Windows 7, before I attempt to go thorough the motions of actually reinstalling the full content, which should not actually be necessary.
Thank you,
Charles Lawrence

Why it's happening is a mystery. My guess would be that the upgrade in the OS is part of the problem, but that is just a guess. Some have reported that Win7 does the upgrade thing better than any previous OS, but others report all sorts of odd problems, when doing it this way.
If you have the DVD, then I'd try a Repair Install, to see if it picks up the Functional Content.
Otherwise, I am at a loss as to why, when you upgraded your OS, PrE 7 lost the link to that material.
Good luck,
Hunt

PE7 Edit functions Not Working well after Upgrading from Vista to Windows 7

My PE 7 was working very well under Vista Home Premium - 64 Bit. But after I upgraded (not clean install) to Windows 7 Home Premium - 64 Bit, it appears that the PE7 is working OK except for the EDIT functions.
I am talking about the Tool Icons on the left side. When I select any icon, the Mouse Curser does NOT chnage to reflect the proper shape. For example, when I click the Crop Tool, my mouse curser chnages to 3 little (tiny) crop icons in a row, and the crop functions don't work like they should.
Can anyone please help as to waht I need to do to correct this situation.
Thank you.

Over at elements village there are a couple threads about this
on windows 7.
I have never had this problem, but other users say the solution
in these threads works.
So it might be worth a try.
http://www.elementsvillage.com/forums/showthread.php?t=55922
http://www.elementsvillage.com/forums/showthread.php?t=54101
Hope this helps.
MTSTUNER

Ir remote does'not function after upgrading from Vista to Windows 7

I just upgraded to Windows 7 Pro from Vista Home Premium. I was able to get most of my drivers to work; however, I was not able to find th edrivers/software for my IR remote control. Has anyone else figured this issue out, or what drivers/software I should get fix the error? Thank you.

ArtAppreciator, I have the same problem. Installed Windows 7 and now my HP USB TV Tuner is not working. Worked fine on Vista. I can get passed the signal setup but get an error when Media Center tries to detect the IR receiver. Any thoughts?

After upgrading from Vista to Windows 7, Firefox lost all my stored passwords, never asks to save them, even though I've checked box for saving them, have made sure history is not cleared, and am not in Private Browsing.

In Windows 7, Firefox 8.0 does not ask to save passwords, and does not save, them, even though I checked the box to save passwords. I have confirmed that clearing history is not on and that I am not in Private Browsing. This is so frustrating, it almost makes me want to go back to Vista. I have looked at all the suggestions to fix the problem in "Help" and have followed the suggestions, and none of them help.

I have the TX2 1012NR and its can upgrade just fine! Here is a few recommendations "only if u have the HP Upgrade program disks"
If you have them you can install a clean copy and delete everything... Do not use the use me first disk included because it prompts you to install an older BIOS.... Just use the windows 7 upgrade disk and start the process. The clean install clears your entire drive but does not void your warranty! When you use the use me first disk after the install it actually loads everything else needed to get you up in running. The touchscreen driver and the HP Mediasmart programs will have to be downloaded from the HP support site. Once again its recommended that if there were any programs installed delete them do not try to update them! This causes issues and countless errors. Specifically with touchscreen drivers etc uninstall them before installing the ones from HP support. I found this was not the easy way to do it but the best way... I also recommend that when doing any sort of BIOS update that you remove your Battery and leave it connected to a power cord only! Last but not least if you really mess up and its under warranty... Send it to HP they will set it back up to factory defaults under Windows Vista with the more up to date BIOS installed. I hope my information helps! Sure you might loose some programs but in the end your computer runs faster and smoother because all the programs installed are made for Windows 7.... Also they did release the Touch Pack for download from the Microsoft website here is a link telling more about the features and benefits and how to get it as it is a totally free download...
http://windowsteamblog.com/windows/b/windows7/archive/2009/05/27/introducing-the-microsoft-touch-pac...
Microsoft Link for download:
http://www.microsoft.com/downloads/details.aspx?FamilyID=b152fadd-82e4-4ddb-a46a-aebe49944428&displa...

HP Media Center PC m1050e - Can't connect to internet after upgrade from XP to Windows 7

My desktop PC with Windows 7 will not connect to the internet after upgrading from XP to Windows 7 Home Premium. This upgrade actually required saving files and a fresh install of Windows 7. When getting Router support help to load a new driver, I keep getting a an error message "Realtek Network Contoller Was Not Found". They say it's an issue that HP will need to help resolve. Can anyone help?
This question was solved.
View Solution.

Thank you very much for your help. I will look into the two options you gave me.

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

Monitor HP w2338h area shrank after upgrade from vista 64 to 7

Monitor HP w2338h area shrank By 3/4in both sides &1/2in top & Bottom after upgrade from vista to 7 Tried settings to max resolution On HP Pavilion a6857c Please Advise, I also reloaded the drivers for my Video card a ATI Radoen 5450 HD and all updates for windows 7 home Premeium 64bit & HP updates
This question was solved.
View Solution.

Glad to help!
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

After upgrading from Vista 64 64 bit to Window7 64bit the DVD stopped working

After upgrading from Vista 64 64 bit to Window7 64bit the DVD at first worked just fine but after about 7 months it just stopped responding as if the hardware as in the DVD Dive it compatible with Windows 7. I have reinstalled the full Windows 7 that I got from HP but it still has the same problem and when I try a full recovery it will start to read the recovery DVD but it take way to long like 15 mins just to start reading and it stops reading with error's after about 2 min's into it.
Were is the errors that I get
This PC in not supported by the system recovery disc. you will not be able to continue to recover this system with these disks.
keep in mind that the problem lies with the DVD drive not working and like stated above it will work if Windows Vista 64 is installed so this error message is not the key to the problem just part of it.

Fixed the mic issue by running Windows Update and installing the latest audio drivers.
AnalogDevices - Audio - SoundMAX Integrated Digital HD Audio
Installation date: ‎11/‎1/‎2009 8:35 AM
Installation status: Successful
Update type: Optional
AnalogDevices Audio software update released in June, 2009

No Sound Devises Detected on my Laptop after an Upgrade from Vista to Windows 7 !

I own a hp dv9720us laptop. I upgraded from vista to windows 7, and have lost all sound. I've tried about everything , but nothing worked. hp 's site say they no longer support driver updates , since 2010. Can anyone help me , Please ?
JIM

Hi,
Have you checked this ?
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-Windows-7-Upgrade-Guide-for-HP-L...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Ts-l663b cd/dvd "device cannot start,code 10" after uppgrade from vista to windows 7 home

Compaq CQ60-216DX
Hi,I've upgraded from Vista to Windows 7 Home and now the CD drive is missing and displays an error code"10" DEVICE CANNOT START, under Device Manager.
Looked for updated drivers on HP Support,there are none for CD drive.
Cannot roll back driver,greyed out.
Used Restore to revert back 2 months and still no progress. Removed recently installed software from HP(C5280) printer as well.
Immediately after upgrade,CD drive worked fine. Even loaded music into iTunes.
I'm at a loss. Any ideas?
Thanks
Fabe
This question was solved.
View Solution.

Hi, Fabe:
Try running the MS automated fix-it tool for DVD's
http://support.microsoft.com/mats/cd_dvd_drive_problems/
Paul

Upgrade from vista to windows 7 home premium

I want to upgrade from vista to windows home premium but I'm told I need to find out if my computer can actually support windows 7. Can someone tell me how do I find out if my computer is able to be upgraded to windows 7? I have an hp pavilion with a 32 bit operating system, the model number is a6207c. Thank you

Ok, I tried this and it said I needed to download and install Nvidia graphics driver version 309.08, I downloaded and installed this version just fine. I done option 2 again and now it says download and install version 353.30. I download this version but got an error when I tried to install it that says THIS GRAPHICS DRIVER COULD NOT FIND COMPATIBLE GRAPHICS HARDWARE. Do you know what I should do now to fix this?

Need to Re-activate CS4 after upgrade from Vista to Windows 7 (32 bit)

Similar Messages

Maybe you are looking for