Cache problem when coming back from external application

Let's see if I can explain this properly. We have an application consisting of a left menu with books and pages. Each page consists of one Struts portlet. In one case we direct the user to an external mail application. This is handled by the Struts action class setting some fields (identifier and a url to return to when closing the external application). Our action class forwards to a jsp page like this (where url, SESSION_KEY and LINKBACK_URL are populated by the action class)
<form action="${url}" name="myForm" METHOD="POST" TARGET="_top">     
<INPUT TYPE="hidden" NAME="i_session" VALUE="<c:out value='${SESSION_KEY}'/>">
<INPUT TYPE="hidden" NAME="linkback" VALUE="<c:out value='${LINKBACK_URL}'/>">
</form>
<script language="javascript">
     document.myForm.submit();
</script>
The external application opens up in the same window and when the user closes it you're linked back to our application through the LINKBACK_URL. Now, when I click in the left menu as I did from the start all I see is a blank page (if I click once again it displays correctly) and if I press F5 I'm logged into the external application again so it seems the jsp page with the form is cached. I can in a way understand that it does but I don't want that so are there any way to get rid of this behaviour?
Best Regards
Torbjorn

>
Edited by Holy at 03/24/2008 11:32 PM

Similar Messages

  • Problems using the phone when coming back from abroad

    I have a problem with my phone -- I live in Denmark. When I travel abroad, my iphone phone works fine. But then when RETURNING to Denmark, it doesn't work. I cannot call out, cannot receive calls. It has happened several times in the last months. Usually it works again after some hours, or lastly a day or longer. This is really irritating. How to prevent this? How to handle it when it happens?

    If you tried with two different Sim card and still have the problem. I would advice you to simply reset the settings. That way you don't loose your medias.
    a. connect your iPhone to iTunes.
    b. Right click on it when it shows up on iTunes and choose back-up
    c. Right click on it and make sure you transfered all purchase items
    d. Take your iPhone, go on settings, general, reset all settings.
    e. follow the directions
    f. choose restore from back up when it ask you
    g. connect to iTunes
    h. right click on it and choose restore from backup.
    i. choose the back-up you had done earlier
    j. You should be good with your newly restored iPhone
    But honestly... I really doubt that the problem is the phone. You should try with the sim card of another carrier.

  • Different photo file sizes when copied back from external HD

    I backed up some photos to an external HD (80GB, same size as in my iMac at the time), with Mac OS Standard format, under Tiger. The internal HD crashed, taking much unbacked-up data with it to the digital beyond.
    Now with my new Leopard iMac (and wisdom acquired by experience), I have noticed a different file size on the different drives after copying the photos back.
    Other posts have pointed out differences in memory allocation / block size as the culprits, however, can that make the large difference seen in my case?
    Example 1 is a Tiff file of 8.2 MB on the external HD, which shrinks to 6,8 MB when copied to the 500 GB iMac drive (taken from the Get Info window)
    Example 2 is a JPEG which shrinks from 1.2 MB to 552 KB when copied over.
    Examples 1 & 2 also shrank to 6.8 MB and 576 KB respectively when copied from the 80GB external drive to another, 320GB external FAT32 drive.
    So my question is: Am I somehow losing something with the shrinking files? Does memory allocation/block size difference make that big a difference?
    Thanks for your help.

    I think I ought to mention that I also have a new laptop and have experienced file sharing permission issues with some applications. Might this be part of the problem? (Although everything seems to be properly owned!)

  • Permissions problem when copying files from external hard drive

    Hi.
    I have recently reinstalled leopard (wiped the hard drive clean) on my macbook pro. (10.5.4). I had used Time Machine so I have a complete backup. But I only wanted a few of the files so I didn't do a backup restore. I went into the file directory of the backup on my external hard drive and dragged the folders I wanted back over to my laptop.
    But I'm in permissions **** though! When I want to copy them over I get an alert saying you may not have privilege to do this and asks for my password. I enter my password and it copies fine. But every time I want to do anything with those files (like move them, or delete them) I have to re enter a password.
    So, inside of the terminal I do a "ls -al" command to see whats going on and find that everything is the same as a natively created folder except for a '@' on the permissions column. I do a "ls -al@' to see more details and I get this:
    drwxr-xr-x@ 6 xenition staff 204 Jul 20 17:08 Assets
    com.apple.metadata:_kTimeMachineNewestSnapshot 50
    com.apple.metadata:_kTimeMachineOldestSnapshot 50
    I did run repair permissions from Disk Utility and it didn't solve it. How can I resolve the permissions on these files?
    Message was edited by: risingtiger

    run ls -aleO on the copied files and see if there are any ACLs or flags.
    BTW, another (and possibly better) way to restore files from an old TM drive is via TM interface. control-click on TM in the dock and choose "browse other TM disks" select a disk to browse and go at it. when you try to restore something you'll be prompted for a location to restore it to and maybe a password.

  • Why loosing sync when coming back from Sountrackpro to FC7?

    Hello everybody...
    I am having a problem that happens for the first time, never had it before. I finished a project in FC7 and then sent the audio to SountrackPro to work it.
    Everything was fine but when importing the final mix, the track was shorter by a number of frames than the lenght of the project, which makes sync to be lost.
    My native setup work is in 25fps. My guess is that somehow something in the preferences or some setup has been changed. I checked in FC7 and my timeline settings and the system are at 25fps non-drop. Also checked in Soundtrack and I have the same settings, but somehow in the process everything gets screwed. I think is Soundtrack thats is messing it but I am not sure anymore.... Any ideas please?
    Thanks a lot

    Hi Nexus_9, I've had this very same problem for some time now. No matter how I exported via FCP7 it would always loose sync going through STP. By accident I opened up a new project with a new sequence and voila! it didn't happen on that project. I went back to my standard project template and it did it again. Something had to go screwy on the old template and there was no fix. Now I have no problem. I can't tell you what was wrong, but I know it works fine once I started with a new project file and sequence. To save all of your already precious time, just copy everything from your old sequence into the new sequence and it should all work out okay.

  • Iphone 4 don't reconect automatically to 3G net when coming back from a no signal issue

    I live in Sao Paulo - Brasil and since last week I am facing a strange behaviour of my iphone. When for some reason I lost the mobile signal, it doesn't recover the 3G signal automatically when the signal is back. I need to restart the device or reset the net configuration to recover the 3G or Edge conection. As I could realize by doing a research on the internet more people with different services providers are facing the same issue. Is this some kind of bug of ios? Is anybody face similar issue in a diiferent location?
    Thanks in advance for any tip
    Fabio

    Me too, I live in rio de Janeiro Brasil and i´m facing the same problem.
    IPHONE 3GS OS. 4.3.5

  • Changing color label of edits coming back from photoshop

    I am currently using lightroom 3.2 RC.  The issue is when sending a raw file out to photoshop then at the conclusion of editing as the file arrives back to lightroom, it now keeps it original color label (yeah), but if I now attempt to change it's color label from one color to another that I use to denote a completed PSD file, the file losses it color label completely and ends up without a color label at all (similar to what use to happen in 3.0), and I have to go find it and relabel it again.
    hopefully I explained that well enough to catch the fault that exists
    mike

    I only have PSE8 and not Photoshop, but I cannot reproduce this behaviour by externally editing a Raw file in PSE8 from LR. When using PSE, you have to have LR render the PSD on the way to PSE already, which is a difference to Photoshop.
    What technique are you using to assign the new color label when coming back from PS (keyboard shortcur, Metadata panel, ...)?
    I'm using LR3.2RC on WinXP SP3.
    Beat Gossweiler
    Switzerland

  • When i put my Mac for sleep it takes more time than normal ( 20 secs). Sometimes, coming back from sleep the system is not responding (freeze).

    When i put my Mac for sleep it takes more time than normal (>20 secs). Sometimes, coming back from sleep the system is not responding (freeze).

    Perform SMC and NVRAM resets:
    http://support.apple.com/en-us/HT201295
    http://support.apple.com/en-us/HT204063
    The try a safe boot:
    http://support.apple.com/en-us/HT201262
    Any change?
    Ciao.

  • After upgrading to 10.6.6, major problems coming back from sleep mode

    I updated my macbook from 10.6.5 to 10.6.6 and now it is unresponsive frequently after coming back from sleep. The computer stops responding and I have the spinning beach ball on the screen forever. I couldn´t find any correlation with the programs I am running.
    I used Onyx to clear all caches, rebooted, etc but nothing seems to help...

    I have the same issue, I've found though that it seems to happen only if i goto sleep mode after logging out of my mid-2010 MBP. As long as I remain logged in and put the MBP to sleep it does not lock up with the spinning beach ball.
    This lock seems to happen just as I click on my name to login after waking my MBP from sleep.
    I have no peripherals, except maybe the power adapter, but it seems to happen regardless of if the power adapter is plugged in. I've done repair permissions in safe mode as well as disk scans.

  • Trigger on Insert into a custom table from external application

    This is the problem I am facing.
    External Application using a different schema lets say extdb on a different server. This writes into a table in a schema called appscustom schema. Appscustom schema is under Oracle Apps.
    A trigger in Oracle Apps to be executed on insert into the appscustom schema table.
    This trigger inturn will run a concurrent job to create the invoice and gl interface tables.
    THe problem I am facing is, The trigger get executed but the concurrent job does not get triggered/run.
    Here is the trigger. Let me know, what might be wrong.
    THe values for vRESP_APPL_Id,vRESP_ID, vUSER_ID becomes null in the test_pims table.
    Whereas when I manually insert from backend into appscustom schema table the concurrent job gets submitted.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    -- Start of DDL Script for Trigger APPS.RWJF_PIMS_ORACLE_INT
    -- Generated 5/25/2005 22:10:52 from APPS@HENRY_DEVL
    CREATE OR REPLACE TRIGGER rwjf_pims_oracle_int
    AFTER
    INSERT
    ON rwjf_pimstxnbatch
    REFERENCING NEW AS NEW OLD AS OLD
    FOR EACH ROW
    WHEN (new.status = 'U' )
    Declare
    ReturnCode BOOLEAN;
    ConcReqID NUMBER := 0;
    vRESP_APPL_ID NUMBER;
    vRESP_ID NUMBER;
    vUSER_ID NUMBER;
    LoadToAp NUMBER :=0;
    LoadToGl NUMBER :=0;
    Begin
    -- vRESP_APPL_ID := apps.fnd_profile.value(200); -- AP --('RESP_APPL_ID');
    -- vRESP_ID := apps.fnd_profile.value(20639); -- 20639 for payables mgr. for rwjf_payables Mgr (50001); --('RESP_ID');
    -- vUSER_ID := apps.fnd_profile.value(1247); -- 1247 for sury 1065 for interface -- ('USER_ID');
    LoadToAp := 0;
    SELECT COUNT(*)
    INTO LoadToAp
    FROM rwjf.RWJF_PimsTxnBatchDtl
    WHERE GL_OR_AP = 'A'
    AND pims_txn_batch_id = :NEW.Pims_Txn_Batch_id;
    LoadToGl := 0;
    SELECT COUNT(*)
    INTO LoadToGl
    FROM rwjf.RWJF_PimsTxnBatchDtl
    WHERE GL_OR_AP = 'G'
    AND pims_txn_batch_id = :NEW.Pims_Txn_Batch_id;
    IF LoadToAp > 0 THEN
    vRESP_APPL_ID := 200; -- Application Id 200 Account payables
    vRESP_ID := 50001; -- RWJF_Payables Mgr for user interface
    vUSER_ID := 1065; -- user id for user name interface
    apps.fnd_global.apps_initialize(vUSER_ID,vRESP_ID,vRESP_APPL_ID);
    ConcReqID := 0;
    ReturnCode := FND_REQUEST.SET_MODE(TRUE);
    ConcReqID := FND_REQUEST.SUBMIT_REQUEST('RWJF',
    'RWJF_PIMS_INT',
    '', '', FALSE,
    :NEW.Pims_Txn_Batch_id,'AP', chr(0),
    END IF;
    IF LoadToGl > 0 THEN
    vRESP_APPL_ID := 20003;
    vRESP_ID := 50003;
    vUSER_ID := 1065;
    apps.fnd_global.apps_initialize(vUSER_ID,vRESP_ID,vRESP_APPL_ID);
    ConcReqID := 0;
    ReturnCode := FND_REQUEST.SET_MODE(TRUE);
    ConcReqID := FND_REQUEST.SUBMIT_REQUEST('RWJF',
    'RWJF_PIMS_INT',
    '', '', FALSE,
    :NEW.Pims_Txn_Batch_id,'GL',chr(0),
    END IF;
    insert into test_pims
    values
    ('Test3',:New.Pims_Txn_Batch_id,vUSER_ID,vRESP_ID,vRESP_APPL_ID);
    insert into test_pims
    values
    ('Test3',ConcReqID,vUSER_ID,vRESP_ID,vRESP_APPL_ID);
    IF ConcReqID = 0 THEN
    DBMS_OUTPUT.PUT_LINE('Problem Submitting Program to get pims txn batch'); /* Handle Error */
    END IF;
    End;
    -- End of DDL Script for Trigger APPS.RWJF_PIMS_ORACLE_INT

    don't quite understand the structure of your tables but it sounds similiar to a merge statement.
    (contiditonally insert, update records depending on whether or not corresponding records exist)
    create table custom_table
    (cust_no number,
    line_no number,
    party_id number
    create table hz_parties
    as (
    select 1 party_id, 'A' bill_to_location, 10 cust_no, 100 line_no from dual union
    select 2, 'B', 20, 200 from dual union
    select 3, 'C', 30, 300 from dual union
    select 4, 'D', 40, 400 from dual
    merge into custom_table t1
    using (select * from hz_parties) t2
    on (t1.party_id = t2.party_id)
    when not matched then insert (t1.cust_no, t1.line_no, t1.party_id)
    values (t2.cust_no, t2.line_no, t2.party_id);
    Edited by: pollywog on Mar 5, 2010 6:52 AM

  • How to stop vdbench from external applications? What are the impacts?

    I am using vdbench to test following scenario:
    1) Start vdbench - do read/write (I use poweshell start-process to start vdbench which returns me the process object )
    2) Poll for particualr system event(my test condtion). When the event happens stop read/write ASAP(To stop the process I use powershell Stop-process and pass process object as the argument. This actually stops IO as seen task manger)
    3) Continue testing
    I want to understand
    1) Are the steps followed correct?
    2) What is the correct method to stop vdbench from external application?
    Regards
    Jugari

    An other thought, that maybe is of interest to you, coming in the next version of Vdbench.
    A conversation with one of my internal users:
    It does not make sense to look at current Vdbench output trying to figure out what is happening when.
    This locks us in to tricks and guessing and prevents me from make changes to the output.
    Monday I will create a new file in Vdbench: status.html
    This file will only be there for any kind of wrappers to see what is going on.
    I'll make sure that the file contents are flushed to the file system as soon as a line of text has been written.
    * Vdbench status
    * The objective of this file is to contain easily parseable information about the current state of Vdbench.
    * This then can serve as an 'official' interface for any software monitoring Vdbench.
    * Each line of output will be immediately flushed to the file system, making its content accessible by any monitoring program.
    * The values below are all tab-delimited.
    03/25/2015-13:42:44-MDT Starting slaves
    03/25/2015-13:42:44-MDT Slaves connected
    03/25/2015-13:42:44-MDT Query host configuration started
    03/25/2015-13:42:44-MDT Query host configuration completed
    03/25/2015-13:42:46-MDT Starting rd=rd1 For loops: None
    03/25/2015-13:42:48-MDT Warmup done rd=rd1 For loops: None
    03/25/2015-13:42:51-MDT Workload done rd=rd1 For loops: None
    03/25/2015-13:42:51-MDT Slaves done rd=rd1 For loops: None
    03/25/2015-13:42:51-MDT Shutting down slaves
    03/25/2015-13:42:51-MDT Vdbench complete
    Henk.

  • EVDRE error "encountered problem when retrieving data from webserver"

    Hi,
    in a EVDRE we always get the error "encountered problem when retrieving data from webserver"
    When analysing this further we noticed this is always generated when a base member is selected in the CV and the expansion on the row for this dimension is has one of the following expansion settings:
    DEP
    ALL
    NOEXPAND
    if we select SELF, the error disappears again and the EVDRE works fine again ... is this normal behavior?
    there is no problem with application nor dimension.
    D
    solved it

    Note that the keyword "ALL" does not include the member itself. This may cause some confusion, but as Harish implies, when you select a base member it finds no matches if your memberset is "ALL".
    If you want to design a report to handle the user moving back and forth between base and non-base members in their CV, you either need to include SELF,ALL or SELF,DEP, or something similar....
    OR you need to get a little fancier, and use EVPRO to look and see if the CV member is base -- evpro(app,member,"CALC") -- and then use some conditional logic in Excel to choose the correct expansion options. If Calc=N, use Self, otherwise use SELF,DEP or whatever you choose. This can be a bit tricky if you then want the user to be able to drill down in the report (especially if you want the workbook option to insert add'l rows on the expansion, rather than replace), but it's all possible.

  • Retrieving the previous session fater coming back from  a different appserv

    Hi
    My requirement is given below .
    Currently I am in Application1 with session1 -now i went to Application2(different app server than application1) with session2 ....now i want to come back to Application1 with previous session i.e session1.is it possible to retrieve the old session using urlrewriting?? if yes then how??
    Regards
    Ravi

    Hmm,
    I don't think so, with URL re-writing. The reason is because application2 would need to do the re-writing, and so would need to know the JSESSIONID of session1, which presumably it wouldn't know.
    Options, I guess, would be to pass the JSESSIONID for session1 to application2, which stores it, then uses it to re-write the URL when coming back to application1. Or you could add a persistant cookie that stores the JSESSIONID from session1, then when you enter into application one, check for the cookie, and re-use the same session. You would want to double check your session timeout however, because the session may die if the user is in application2 for too long.

  • Satellite P850-30W - Fan does not run after coming back from sleep mode

    I got a Toshiba Satellite P850-30W with bios 1.90.
    Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
    This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
    Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
    I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
    ...this error could potentinally damage the laptop...
    to get the fan running again I have to restart windows
    anyone else experienced this?
    I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

    What kind of answer do you expect here in user community?
    Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
    In other Forum you can read about Satellite notebook; but is it exacts the same model?
    No, it seems to be an L650 series. Its completely different series .
    From my opinion its not software related problem.
    BIOS issue?
    Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
    It could be a hardware related issue. Memory? Maybe
    In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

  • WRT1200 Network error when paying music from external disk attached to the Router

    Hi everyone, I have one problem with my new WRT1200AC wireless routerFrecuently network errors when playing music from external USB3 disk attached to WRT1200AC Any idea to solve this problem Thanks in advance Regards, Rod

    Wireless Configurations
    Ensure the default (linksys) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios for dual band routers. Can be anything and not something that's already in use by any neighbouring WiFi routers.
    What wireless modes are you using?
    Try Mixed mode, single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
    Channel Width set for Auto 20/40Mhz or try 20Mhz only.
    Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&respid=0&snid=4&dispid=0&cpage=search
    What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. 
    Ensure any devices with WiFi adapter drivers are updated.
    Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
    Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
    WMM Support must be enabled for single wireless N mode to function.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
    Router Placement
    Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
    3-6' feet minimum safe distance between devices.
    Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search
    http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
    http://kb.linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the_external_antennas_on_the_Linksys_WRT1900AC.xml&pid=80&converted=0Rod2 wrote:
    Thanks I play music fom external disk attached to the router from my internal netwok. No Internet traffic. The network error occurs between a notebook and the router in my home network Thanks Rod 

Maybe you are looking for

  • Tab does not show when dragged into it's own new window

    This happened after I updated to Firefox 8.0.1. Same problem with 9.0.1. I'm on a Mac running OS X 10.5.8. I have not changed any add-ons, plugins, extensions, or anything like that. Every time a tab is dragged from my main window to form it's own ne

  • Number of records in a database table

    Hi, Is there a way to find the no of records for database tables ? I have over 1000 tables and need to find the tables without any records. I have found an FM for this requirment but it isnt of much use as i dont have developer access to the system.

  • Installation RSAT with an error CBS HRESULT=0x800f0922

    Hello, when I run installation of RSAT on fresh deployed Windows 8 EN-US Enterprise in Power Shell with command: add-windowspackage -packagepath '.\Windows6.2-KB2693643-x64.cab' -online -logpath rsat.log I am getting an error 0x800F0922 I have tried 

  • Does the 8540 support VLAN Trunking

    I would like to VLAN trunk four VLANs(8540 bridge-groups) from an 8540 switch router to a Cat 5000. I have not seen in Cisco's documentation anything that indicates that the 8540 supports VLAN trunking.

  • IMAC RAM issues

    I have a Mid-2010 iMAC 3.06 GHz machine.  It came with 4 GB of RAM (2x2 GB Hynix brand).  I bought 2x4 GB Corsair RAM from Bestbuy.com yesterday and it was recognized as having 12 GB or RAM.  However, it would crash every 5 to 10 mins. and reboot.  I