Calender using Date From and Date To
Hi,
I'm trying to build a calender based on a table that has a user_name, date_from, date_to and comments.
Basically I want the calender to show all the dates betwwen the date from and date to. Is there any way of getting the calender to use those dates and all the days in between or will I have a to build a view that returns one row for each day between the start and end
Whats the best way of doing this and does any one have an example
Thanks in advance
Andy,
See my blog post here:
http://deneskubicek.blogspot.com/2007/05/create-pseudo-tables.html
and the corresponding example:
http://htmldb.oracle.com/pls/otn/f?p=31517:83
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------
Similar Messages
-
What is the purpose of Date From and Date To In Oracle HRMS ?
hi
I have doubt on
What is the purpose of Date From and Date To In Oracle HRMS?
ThanksWhere do you see these fields? Please give full details (eg, the navigation path).
If you're referring to Effective Start Date and Effective End Date (effective_start_date, effective_end_date) these are two fields that appear on many HRMS entities. They're used to store dated history over time. For example:
14-Jan-2009 to 19-Apr-2009 - Pam Stephens
20-Apr-2009 to date - Pam Erickson
In this example Pam got married on the 20th April 2009 and changed her surname from Stephens to Erickson. Here the history of changes are kept so that if we date-track to any time prior to the 20th April 2009 we'll see Pam Stephens and if we date-track on or after the 20th April 2009 we'll see Pam Erickson.
Check out the following Oracle Support article for more information:
How Date Track Works [ID 177733.1] -
How to view "date from" and "date to"
Hi,
I have loaded EMP data. In the mapping "date from" and "date to" are visible. But these fields are not seen when I display the EMP data.Can someone please tell me how to view these fields?
Thanks,
WilliamsI got your question . Please find my understandings .
In the transformation Please check weather routine or formula is written which is stopping the dats
to be updated to the target .
I mean data is there in the source but if its not updating to target it seems some rules have been set up in the transformation . Please check .
Assign marks is the best way to appreciate help -
Date From and Date To Restriction
Hi,
I am loading data from R/3 into BW. I am bringing in Time Dependent Data.
I want to write routine to bring the data only ones which are valid.
I've written code as
form compute_time_dependent_dates
changing p_datefrom type d
p_dateto type d
p_subrc like sy-subrc.
Insert source code to current selection field
$$ begin of routine - insert your code only below this line -
p_datefrom = 20040101.
p_dateto = sy-datum.
p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.
But when i specify the values it brings in 0 records. And if do not specify it brings all the records.
Any Idea???
Thanks..
Sachin KMay be there is no records for that specified criteria?
Nagesh. -
Hi All,
I have created two parameters P_Date_From and P_Date_TO.
I am using as below in SQL query to restrict data.
Where Ordered_On_Date>=:P_Date_From and Ordered_On_Date<=:P_Date_TO
Its working fine if I supply the dates but erroring out when we run the report without giving any dates.
Please suggest!!
Regards
MBVANANDYou need to account for the null date values. Modify your "where" clause to this and try:
Where Ordered_On_Date>= nvl(:P_Date_From, Ordered_On_Date) and Ordered_On_Date<=nvl(:P_Date_TO, Ordered_On_Date)
Thanks,
Bipuser -
Featching Data From The Data Base Using DI API in Matrix
Hi
All of u i am shahid i faced a problem when i retrive
the selected data from the data base using matrix plz.
Healp me!.
Thanks
Mohd Shahid.
SAP Techinical Consultent
Option Strict Off
Option Explicit On
Friend Class UseMatrix
'// This parameter will use us to manipulate the
'// SAP Business One Application
Private WithEvents SBO_Application As SAPbouiCOM.Application
Private oForm As SAPbouiCOM.Form
Private oMatrix As SAPbouiCOM.Matrix
Private oColumns As SAPbouiCOM.Columns
Private oColumn As SAPbouiCOM.Column
'// declareing a DB data source for all the Data binded columns
Private oDBDataSource As SAPbouiCOM.DBDataSource
'// declaring a User data source for the "Remarks" Column
Private oUserDataSource As SAPbouiCOM.UserDataSource
' This Function is called automatically when an instance
' of the class is created.
' Indise this function
Public Sub New()
MyBase.New()
'// set SBO_Application with an initialized application object
SetApplication()
'// Create the UI
CreateFormWithMatrix()
'// Add Data Sources to the Form
AddDataSourceToForm()
'// Bind the Form's items with the desired data source
BindDataToForm()
'// Load date to matrix
GetDataFromDataSource()
'// Make the form visible
oForm.Visible = True
End Sub
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// statment should be suficient for either development or run mode
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
'// connect to a running SBO Application
Try ' If there's no active application the connection will fail
SboGuiApi.Connect(sConnectionString)
Catch ' Connection failed
System.Windows.Forms.MessageBox.Show("No SAP Business One Application was found")
End
End Try
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
'SBO_Application.MessageBox("Hello World")
End Sub
Private Sub SBO_Application_AppEvent(ByVal EventType As SAPbouiCOM.BoAppEventTypes) Handles SBO_Application.AppEvent
Select Case EventType
Case SAPbouiCOM.BoAppEventTypes.aet_ShutDown
SBO_Application.MessageBox("A Shut Down Event has been caught" & _
Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
'// terminating the Add On
System.Windows.Forms.Application.Exit()
End Select
End Sub
Private Sub CreateFormWithMatrix()
'// Don't Forget:
'// it is much more efficient to load a form from xml.
'// use code only to create your form.
'// once you have created it save it as XML.
'// see "WorkingWithXML" sample project
'// we will use the following object to add items to our form
Dim oItem As SAPbouiCOM.Item
'// we will use the following objects to set
'// the specific values of every item
'// we add.
'// this is the best way to do so
Dim oButton As SAPbouiCOM.Button
Dim oStaticText As SAPbouiCOM.StaticText
Dim oEditText As SAPbouiCOM.EditText
'// The following object is needed to create our form
Dim creationPackage
creationPackage = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
creationPackage.UniqueID = "UidFrmMatrix14"
creationPackage.FormType = "TypeFrmMatrix14"
'// Add our form to the SBO application
oForm = SBO_Application.Forms.AddEx(creationPackage)
'// Set the form properties
oForm.Title = "Quality Check"
oForm.Left = 336
oForm.ClientWidth = 620
oForm.Top = 44
oForm.ClientHeight = 200
'// Adding Items to the form
'// and setting their properties
'// Adding an Ok button
'// We get automatic event handling for
'// the Ok and Cancel Buttons by setting
'// their UIDs to 1 and 2 respectively
oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
oItem.Left = 5
oItem.Width = 65
oItem.Top = 170
oItem.Height = 19
oButton = oItem.Specific
oButton.Caption = "Ok"
'// Adding a Cancel button
oItem = oForm.Items.Add("2", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
oItem.Left = 75
oItem.Width = 65
oItem.Top = 170
oItem.Height = 19
oButton = oItem.Specific
oButton.Caption = "Cancel"
'// Adding a Text Edit item
'oItem = oForm.Items.Add("txtPhone", SAPbouiCOM.BoFormItemTypes.it_EDIT)
' oItem.Left = 265
'oItem.Width = 163
'oItem.Top = 172
'oItem.Height = 14
'// Adding an Add Phone prefix column button
' oItem = oForm.Items.Add("BtnPhone", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
' oItem.Left = 160
' oItem.Width = 100
' oItem.Top = 170
' oItem.Height = 19
' oButton = oItem.Specific
' oButton.Caption = "Add Phone prefix"
'// Add the matrix to the form
AddMatrixToForm()
End Sub
Private Sub AddMatrixToForm()
'// we will use the following object to add items to our form
Dim oItem As SAPbouiCOM.Item
'// we will use the following object to set a linked button
Dim oLink As SAPbouiCOM.LinkedButton
'// Adding a Matrix item
oItem = oForm.Items.Add("Matrix1", SAPbouiCOM.BoFormItemTypes.it_MATRIX)
oItem.Left = 5
oItem.Width = 500
oItem.Top = 5
oItem.Height = 150
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
'// Adding Culomn items to the matrix
oColumn = oColumns.Add("#", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "#"
oColumn.Width = 30
oColumn.Editable = False
'// Add a column for Item Code
oColumn = oColumns.Add("DSItemCode", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
oColumn.TitleObject.Caption = "Item Code"
oColumn.Width = 40
oColumn.Editable = True
'// Link the column to the ITEM master data system form
oLink = oColumn.ExtendedObject
oLink.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_Items
oColumn = oColumns.Add("DSItemName", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "Item Name"
oColumn.Width = 80
oColumn.Editable = True
'// Add a column for BP Card Phone
oColumn = oColumns.Add("DSWhs", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "Ware House"
oColumn.Width = 40
oColumn.Editable = True
'// Add a column for BP Card Phone
oColumn = oColumns.Add("DSQuantity", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "Quantity"
oColumn.Width = 40
oColumn.Editable = True
'// Add a column for Combo Box
oColumn = oColumns.Add("DSQuality", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
oColumn.TitleObject.Caption = "Quality"
' oColumn.ValidValues.Add("OK", "")
'oColumn.ValidValues.Add("NOT OK", "")
oColumn.Width = 40
oColumn.Editable = True
oColumn = oColumns.Add("DSReport", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "Remarks"
' oColumn.ValidValues.Add("OK", "")
'oColumn.ValidValues.Add("NOT OK", "")
oColumn.Width = 40
oColumn.Editable = True
'// Add a column for BP Card Phone
' oColumn = oColumns.Add("DSPhoneInt", SAPbouiCOM.BoFormItemTypes.it_EDIT)
' oColumn.TitleObject.Caption = "Int. Phone"
'oColumn.Width = 40
'oColumn.Editable = True
End Sub
Public Sub AddDataSourceToForm()
'// every item must be binded to a Data Source
'// prior of binding the data we must add Data sources to the form
'// Add user data sources to the "International Phone" column in the matrix
' oUserDataSource = oForm.DataSources.UserDataSources.Add("IntPhone", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
'// Add DB data sources for the DB bound columns in the matrix
oDBDataSource = oForm.DataSources.DBDataSources.Add("OITW")
End Sub
Public Sub BindDataToForm()
'// getting the matrix column by the UID
oColumn = oColumns.Item("DSItemCode")
'oColumn.DataBind.SetBound(True, "", "DSCardCode")
oColumn.DataBind.SetBound(True, "OITW", "ItemCode")
'oColumn = oColumns.Item("DSItemName")
'oColumn.DataBind.SetBound(True, "OITW", "ItemName")
oColumn = oColumns.Item("DSWhs")
oColumn.DataBind.SetBound(True, "OITW", "WhsCode")
oColumn = oColumns.Item("DSQuantity")
oColumn.DataBind.SetBound(True, "OITW", "U_QCStock")
'// to Data Bind an item with a user Data source
'// the table name value should be an empty string
' oColumn = oColumns.Item("DSPhoneInt")
'oColumn.DataBind.SetBound(True, "", "IntPhone")
End Sub
Public Sub GetDataFromDataSource()
'// Ready Matrix to populate data
oMatrix.Clear()
oMatrix.AutoResizeColumns()
'// Querying the DB Data source
oDBDataSource.Query()
'// setting the user data source data
'oUserDataSource.Value = "Phone with prefix"
oMatrix.LoadFromDataSource()
End Sub
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
If (pVal.FormUid = "UidFrmMatrix") Then
If ((pVal.itemUID = "BtnPhone") And _
(pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED) And _
(pVal.Before_Action = False)) Then
AddPrefix()
End If
If ((pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD) And _
(pVal.Before_Action = False)) Then
SBO_Application.MessageBox("Form Unloaded, Addon will terminate")
System.Windows.Forms.Application.Exit()
End If
End If
End Sub
Public Sub AddPrefix()
Dim i As Integer
Dim PhoneExtCol As SAPbouiCOM.Column
Dim newPhone As String
Dim oItem As SAPbouiCOM.Item
Dim oEditTxt As SAPbouiCOM.EditText
'// Get the prefix edit text item
oItem = oForm.Items.Item("txtPhone")
oEditTxt = oItem.Specific
'// Flush user input into datasources
oMatrix.FlushToDataSource()
'// Get the DBdatasource we base the matrix on
oDBDataSource = oForm.DataSources.DBDataSources.Item("OCRD")
'// Iterate all the records and add a prefix to the phone
For i = 0 To oDBDataSource.Size - 1
newPhone = oDBDataSource.GetValue("phone1", i)
newPhone = newPhone.Trim(" ")
oDBDataSource.SetValue("phone1", i, oEditTxt.String + newPhone)
Next
'// Load data back to
oMatrix.LoadFromDataSource()
End Sub
End ClassHi Shahid,
I am not sure what your question is. The code you pasted looks like the MatrixAndDataSources example that comes with the SDK. What are you trying to do?
Thanks,
Adele -
i wish to generate reports from the database an out put it
but i need to enter a date from and to ina html input box
in the input box a data of range will be input from a start
to latest
latest being the default as today's date.
any help tips snipplets, concepts , turot=rails.
thankseasycfm.com has tutorials for people who are brand new.
If you don't know much about sql, I have heard good things
about the book, Teach Yourself SQL in 10 Minutes by Ben
Forta. -
How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.
There is no way to see where he has been.
Go into Settings > General > Restrictions > Safari and turn it off. Then add the MacGruff browser from the app store. After that go back to Restrictions and turn off the ability to add apps. -
Does Facetime Use Data From You Data Plan?
Does Facetime Use Data From You Data Plan?
If so, what would be a good plan to use :200MB, 2 GB, or 2GB + Tethering?
Or Does it use up minutes?Facetime uses wi-fi.
"People have been dreaming about video calling for decades. iPhone 4 makes it a reality. With just a tap, you can wave hello to your kids, share a smile from across the globe, or watch your best friend laugh at your stories — iPhone 4 to iPhone 4 or to the new iPod touch over Wi-Fi."
http://www.apple.com/iphone/features/ -
When my daughter uses her I-phn on our home wirless network does it still use data from our data plan? Thanks.
No. As long as she's connected to WiFi, no cellular data is being used.
-
Powerpivot Error on Refresh -- "We couldn't get data from the data model..."
I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
JeanThanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean -
Difference b/w DATA TYPE and DATA OBJECT & differences b/w TYPE and LIKE
hai
can any one say the differences between Data type and Data Object.
And also differences between TYPE and LIKE
thanks
Ganihi,
_Data Types and Data Objects_
Programs work with local program data that is, with byte sequences in the working memory. Byte sequences that belong together are called fields and are characterized by a length, an identity (name), and as a further attribute by a data type. All programming languages have a concept that describes how the contents of a field are interpreted according to the data type.
In the ABAP type concept, fields are called data objects. Each data object is thus an instance of an abstract data type. There are separate name spaces for data objects and data types. This means that a name can be the name of a data object as well as the name of a data type simultaneously.
Data Types
As well as occurring as attributes of a data object, data types can also be defined independently. You can then use them later on in conjunction with a data object. The definition of a user-defined data type is based on a set of predefined elementary data types. You can define data types either locally in the declaration part of a program using the TYPESstatement) or globally in the ABAP Dictionary. You can use your own data types to declare data objects or to check the types of parameters in generic operations.
All programming languages distinguish between various types of data with various uses, such as .. type data for storing or displaying values and numerical data for calculations. The attributes in question are described using data types. You can define, for example, how data is stored in the repository, and how the ABAP statements work with the data.
Data types can be divided into elementary, reference, and complex types.
a. Elementary Types
These are data types of fixed or variable length that are not made up of other types.
The difference between variable length data types and fixed length data types is that the length and the memory space required by data objects of variable length data types can change dynamically during runtime, and that these data types cannot be defined irreversibly while the data object is being declared.
Predefined and User-Defined Elementary Data Types
You can also define your own elementary data types in ABAP using the TYPES statement. You base these on the predefined data types. This determines all of the technical attributes of the new data type. For example, you could define a data type P_2 with two decimal places, based on the predefined data type P. You could then use this new type in your data declarations.
b. Reference Types
Reference types are deep data types that describe reference variables, that is, data objects that contain references. A reference variable can be defined as a component of a complex data object such as a structure or internal table as well as a single field.
c. Complex Data Types
Complex data types are made up of other data types. A distinction is made here between structured types and table types.
Data Objects
Data objects are the physical units with which ABAP statements work at runtime. The contents of a data object occupy memory space in the program. ABAP statements access these contents by addressing the name of the data object and interpret them according to the data type.. For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
Each ABAP data object has a set of technical attributes, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type). You declare data objects either statically in the declaration part of an ABAP program (the most important statement for this is DATA), or dynamically at runtime (for example, when you call procedures). As well as fields in the memory area of the program, the program also treats literals like data objects.
A data object is a part of the repository whose content can be addressed and interpreted by the program. All data objects must be declared in the ABAP program and are not persistent, meaning that they only exist while the program is being executed. Before you can process persistent data (such as data from a database table or from a sequential file), you must read it into data objects first. Conversely, if you want to retain the contents of a data object beyond the end of the program, you must save it in a persistent form.
Declaring Data Objects
Apart from the interface parameters of procedures, you declare all of the data objects in an ABAP program or procedure in its declaration part. These declarative statements establish the data type of the object, along with any missing technical attributes. This takes place before the program is actually executed. The technical attributes can then be queried while the program is running.
The interface parameters of procedures are generated as local data objects, but only when the procedure is actually called. You can define the technical attributes of the interface parameters in the procedure itself. If you do not, they adopt the attributes of the parameters from which they receive their values.
ABAP contains the following kinds of data objects:
a. Literals
Literals are not created by declarative statements. Instead, they exist in the program source code. Like all data objects, they have fixed technical attributes (field length, number of decimal places, data type), but no name. They are therefore referred to as unnamed data objects.
b. Named Data Objects
Data objects that have a name that you can use to address the ABAP program are known as named objects. These can be objects of various types, including text symbols, variables and constants.
Text symbols are pointers to texts in the text pool of the ABAP program. When the program starts, the corresponding data objects are generated from the texts stored in the text pool. They can be addressed using the name of the text symbol.
Variables are data objects whose contents can be changed using ABAP statements. You declare variables using the DATA, CLASS-DATA, STATICS, PARAMETERS, SELECT-OPTIONS, and RANGESstatements.
Constants are data objects whose contents cannot be changed. You declare constants using the CONSTANTSstatement.
c. Anonymous Data Objects
Data objects that cannot be addressed using a name are known as anonymous data objects. They are created using the CREATE DATAstatement and can be addressed using reference variables.
d. System-Defined Data Objects
System-defined data objects do not have to be declared explicitly - they are always available at runtime.
e. Interface Work Areas
Interface work areas are special variables that serve as interfaces between programs, screens, and logical databases. You declare interface work areas using the TABLES and NODESstatements.
What is the difference between Type and Like?
Answer1:
TYPE, you assign datatype directly to the data object while declaring.
LIKE,you assign the datatype of another object to the declaring data object. The datatype is referenced indirectly.
Answer2:
Type is a keyword used to refer to a data type whereas Like is a keyword used to copy the existing properties of already existing data object.
Answer3:
type refers the existing data type
like refers the existing data object
reward if useful
thanks and regards
suma sailaja pvn -
How to change value date from posting date to net due date
Hi Gurus,
My client wants to change value date from posting date to net due date. currently posting date is considered as value date but in future client wants to change value date to net due date of documents.
1. what configurations need to be maintained to change value date from posting date to net due date.
2. Will these changes effect automatic payment run.
Thanks and Regards,
SureshHi Suresh,
In Future
While posting the documents you can mention the value date as due date of the documents.
For already posted documents
You can change the value date to net due date.
If the value date is display mode i.e. if you are not able to change the value date in FB02 (Document Change Mode), use OB32 transaction and make value date field as eidtable (BSEG-VALUT).
In OB32 transaction enter all the required fields like Account type, transaction type, company code and finally activate the Field can be changed check box.
But not sure, whether we can change the value date to previous date or not?
This would help you..
Regards,
Praisty
Edited by: Praisty on Jul 28, 2009 9:56 AM -
Data Carriers and Data carrier type
Hi Sap Gurus,
Pls let me know is there any necesssity of defining any new Data Carrier types other than PC,
if so at what circumstances and requirements,
also pls throw some light about data Carriers, when is the new data carriers required to be created
at what circumstances and requirements.
is that to access a document from different server or Different system, if it is so why is this required as the documents are always stored in a central content server and Once checked in, any one can access the document from Server,
2) can we make use of Application softwares Installed in one System and make it run in another system, example,
if there are say 4 system totally, among this S1 system1 has Autocad Installed in it ,
rest of the 3 system have not installed Autocad, Can the system 2,3 and 4 edit the auto cad drawings in there system, does at this situations where Datacarries and Data carries types come in to picture,
Please throw some light on this
Thanks and regards
SathishDear Christoph Hopf,
Thanks a lot for your Quick Response
as you have Explained,i assume it is mainly used to store a local copy or extra copy of the Original application files in the system which we use to View them, or if we feel to store the copy in any other system also.
Example Say there are 3 systems S1, S2 and S3
if we are viewing an original file in System S1 and want the same Copy to be stored in System S2 or S3.....
then this data carrier configuration is required if iam right?
But Sir apart from this funtionality can i also know the SAP definition purpose, as it defines data carrier type as below
The system requires the data carrier type in order to exchange data with other data carriers.
This is the case, for example, if the user:
wants to process original application files stored on another computer
wants to use an application installed on another computer
if i can interpret this in right way
it tells us that, by use of data carrier and Data carrier types
we can access a original file stored in Different systems,
if it is so why is this required as the documents are always stored in a central content server and Once checked in, any one can access the document from Server,
2) can we make use of Application softwares Installed in one System and make it run in another system, example,
if there are say 3 system totally, among this S1 system1 has Autocad Installed in it ,
rest of the 2 system have not installed Autocad, Can the system 2, and 3 edit the auto cad drawings in there system, does at this situations where Datacarries and Data carries types come in to picture,
if so how is this made possible?
pls explain with example or Screen shots in Wiki if possible
can u tell me what is the difference between Datacarrier and Datacarrier types with any examples as well
Thanks and regards
Sathish
Edited by: sathish kumar on May 22, 2008 2:17 AM -
2 month old date from current date in red color only
Hi all,
How can I Highlight 2 month old date from current date in red color only at report level with using Alertr.
Example:-
Date
3/27/2014
4/3/2014
3/5/2014
4/1/2014
3/31/2014
5/24/2013
2/10/2014
4/11/2014
12/11/2013
9/25/2013
1/30/2014
2/18/2014
2/24/2014
1/6/2014
3/3/2014
Thanks
SamHello Sam,
are you using Universe for your report..if Yes..pls try below option.
Create two objects in the universe
Object1 syntax: current date() (Note:this object you can create at webi level)
Object 2 syntax:addmonths(sysdate;-2)
Now create a alert in webi report by using below conditions
Day is less than Object1
and
Day is greater than Object2
Please try this and let me know if any issues.
Regards,
Naveen D
Maybe you are looking for
-
Upgraded last night. After restart opening any application took a long time to open if at all. This morning functioning a little better but still very slow to launch an application. Also noticed that files on the desktop are not displaying as they
-
Error starting Web Start App: automation server cannot create object
When starting Web Start Application without java installation just by starting javaws xyz.jnlp in Windows2000 there comes 2 times the Error Message "Microsoft JScript: automation server cannot create object", but the application starts nevertheless.
-
Premiere Freezes During Capture
I have a problem with Premiere freezing during capture, consistently at 17 minutes, around 25 seconds. I am capturing from a Blackmagic Decklink SDI card, 720p 59.94, ProRes 422 HQ. I've also tried LT. I am running Premiere 6.0.2 on OS 10.6.8 on a
-
Activity to enter task and start Workflow
Dear all, I have copied template function "QM10_COPY_REFERENCE_FORM_TASK" to my customer namespace. Like in the FM documentation specified I changed the coding to this: *- If you want to start a workflow task, you have to fill the container. *- The f
-
Auto generate apex pages based on metadata
Dear All, Is there a way where I can auto-generate pages in apex by providing some metadata? Ex: If I provide all the metdata with which kind of items to be created for the attributes and pass it to apex, can it generate the pages automatically then?