"Call Fail" error when trying to make out calls.
Hi, I'm on iPhone 4S with iOS 6.1.3 . Recently I've been experiencing this problem of doing outgoing calls. It keeps on having this "CALL FAILED" error. Previously it sometimes came but went back normal after an hour and I thought It might be caused by my network carrier . But its been 4 days now. Do take note that Im still be able to receive all incoming calls, SMS, Apps Messaging as well internet surfing & others. Pls guys help me to resolve this issue. Tq.
P/S
My location = Malaysia
My ISP & cellular network carrier = Celcom
Hello zipinabag,
Thank you for all the information you provided regarding the issue you are experiencing when making a call on the iPhone. I recommend reviewing this tutorial:
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
Tour 9630 says phone in use when trying to make a call.
We have 10 new BB Tour 9630. We have already returned one due to garbled voice. Another has developed a new condition that such that when trying to make a call it says "phone in use" when there is no call in progress. Only solution so far is to take battery out and reboot. It has happened 2 times in the past week. Taking the battery out and rebooting is not an acceptable solution. Anyone have any better ideas?
Thanks
Mike GOther than exchanging it, I would suggest upgrading the OS to the latest released and see if that helps any.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
RFC call failed : Error when opening an RFC connection
Hi,
As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
"RFC call failed : Error when opening an RFC connection"
Others things are with success message.
Regards,
Bala Rajahi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points -
why do i get the message (LG-HBM 760,iPhone,speaker) when trying to make a call?
If you have a bluetooth device connected to the phone, it is allowing you to select the audio device you want to use to handle the call with. There should be a checkmark by the device it is going to use, and you can change that if you like.
-
I reset my iPhone 5 and the LTE Network showed but when I tried to make a call, it switched to 3G then just to bell and the call will not go thru. Can't receive calls either
Hi Turtlesquirt,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with making and receiving calls on your iPhone:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
I hope this information helps ....
- Judy -
My screen flashes when trying to make an outgoing call. I am unable to access any of the screen features such as keyboard etc.
Could be a problem with the proximity sensor. Are you using a case around your phone or a protective film attached to the screen? If yes, remove them, to make sure that the sensor is not covered.
Also try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting. -
Hi...I have just obtained a secondhand iphone 5. I'm not technically minded and I don't understand 'geek speak' so please be gentle. I have done all I can think of to bottom this problem. I have switched on and off. Tried different o2 sims (including 2 brand new) that I know are fine, restored to factory settings, changed carrier from 'Auto' to O2 and spent ages on line with o2 chat but everything at their end is absolutely fine. Everything on the phone seems to be working apart from the phone aspect of things. All incoming calls go straight to voicemail and show on the phone as 'Cancelled calls' and when dialling out, I can key in the numbers and get the keypad tone (not dialling tone) but as soon as I press the green key to make the call, all that happens is the keypad pops back up onto the screen. The phone was bought on ebay as an o2 phone (the photo showed Giffgaff on the phone's screen but I understand this to be one and the same?) and as being 6 months old but I have put the serial number into the support website and...surprise surprise..,it must be at least twice that age as the warranty has expired. I have made 2 attempts to have a web chat with Apple Support, have reached the 'You're all set, we'll be with you in 2 mins' and have been left hanging there for over an hour on each occasion, so I've given that up as a bad job!! Any help will be much appreciated...and also, will Apple charge me £25 for each of the aborted chat attempts, please? Over to you...hopefully and many thanks in anticipation.
My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum -
Centro Freezes Upon Incoming Calls and Doesn't Register When Trying to Make a Call
I am currently on my second Centro since March 18th and both have had the same issues. Sporadically when receiving incoming calls the phone likes to freeze up. I have tried waiting it out to see what happens, but the screen stays. The only way I have found out of this is to remove the back take out the battery and put it back in. This has happened on base phone with no apps. I haven't even gotten to Versamail yet, which seems like that offers a whole assortment of new problems. So this is pretty much out of the box stock and it is this flawed. I have never owned a Palm device before and I must say this isn't giving me a good impression of the company. I am hoping someone here can give me a fix. I really like the style of the phone and the features when it is working, but I can't have a phone that won't answer or make calls. I believe that is the point of one. I'm tempted to just go back and get a Blackberry like my fiance. That seems to work fine. I don't mean to be threatening, but while researching this problem it seems like there is no answer and Palm isn't really doing anything to fix it. The closest thing I saw to an answer was that Centro is a new phone and is bound to have flaws. Is that it? We are stuck to suffer with a faulty device because we originally liked the product we purchased. If someone can help me it would be much appreciated. I want to keep this phone, but maybe it wasn't meant to be.
Post relates to: Centro (AT&T)Hi, and welcome to the Palm Community Forums.
First, I have removed your three (3) other posts on this same subject in other threads, as one is sufficient.
The vast majority of Centro owners seem to very happy with their phones, including me (and I am not a Palm employee, just a volunteer here). My Centro (from AT&T, just like yours) works just fine sending and receiving calls. So, that leads me to the conclusion that either:
Something is wrong with your individual device, which can happen. Yes, I suppose bad luck can strike you even with two phones. Or,
Something you are doing with the phone is causing a problem.
Did you upgrade from a previous Palm OS phone or handheld device on your computer? If so, and if you are using the same Hotsync ID, then your system files may be that is the issue. Even after you Hard Reset, try to use the phone BEFORE you Hotsync it back to your desktop.
If you still cannot make or receive calls with your Centro immediately after you do a correct Hard Reset (maybe you're not doing that correctly?), before Hotsyncing with your computer, then I would take the phone to your local AT&T store to see if they cannot give you one that works. The Centro comes with a one-year warranty, and AT&T has a 30-day no-questions-asked return policy.
Good luck.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
Format Failed error when trying to format a WD MyBook 1TB external
I have tried twice to format the drive with the same "Format Failed" error message. I know it was still formatting with 28 minutes remaining (of the 7 hour format job) the first time - the second time it ran over night. Both times, I formatted with Mac OS Extended (journaled), and selected to zero out the data.
The only difference between the two attempts was a message reporting the Mac lost connection with the drive (after the first attempt) - didn't see any such message this morning after the second attempt.
I set a couple partitions, and ran "Disk Verify".
"DIsk Verify" lists the things it has checked, and gives the following messages:
The volume Startup Backup appears to be OK.
The volume Time Machine appears to be OK.
Other than the "Format Failed" error message, the disk appears to be ok. The "Startup Backup" volume is 319.87 GB as I set, and the "Time Machine" volume is 611.64 GB
I am able to copy a file to both volumes.
So, is the "Format Failed" error message real, and the "Disk Verify" fails to see a problem because it is checking things like the Catalog file, and not each spot on the drive?
Are there any disk utilities that can test the whole drive?As I can see from the information posted, you are trying to
use URL-based portlet's SSO feature, though not in a correct
way.
The SSO feature of URL-based portlets relie on the usage
of Cookies as authentication tokens. For example, in the
present context, http://hostname:port/j2ee/examples/jsp/c.jsp
will write a cookie to the client upon successfull authentication.
Subsequent access to the same JSP or some other JSP in the same
workspace should be checking for the existence of this particular
cookie at the client side and if found should not prompt for
user information again.
If you can fine tune your existing applications as per above
conditions, then everything should work fine. Else you might
want to use page parameters to pass user information.
For more information on page parameters, please visit
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1 -
IFS Internal error when trying to make connection
Anyone have a workaround for this problem?
At startup, my iFS (iFS 1.0 on Solaris) application creates an instance of the LibraryService class and uses that instance to create/destroy LibrarySession instances.
If my app sits idle for a long period (overnight), I get the following
exception when trying to create a new LibrarySession connection instance:
oracle.ifs.common.IfsException: IFS-9999: Internal error:
java.sql.SQLException: Error while trying to retrieve text for error ORA-03113
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java)
at oracle.jdbc.oci8.OCIDBAccess.executeFetch(OCIDBAccess.java)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java)
at oracle.jdbc.driver.OracleStatement.doExecute(OracleStatement.java)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java)
at oracle.ifs.server.S_LibrarySession.getIdForNewObject(S_LibrarySession.java)
at oracle.ifs.server.S_LibrarySession.<init>(S_LibrarySession.java:1661)
at oracle.ifs.server.S_LibraryService.constructSession(S_LibraryService.java:1978)
at oracle.ifs.server.S_LibraryService.connect(S_LibraryService.java:1798)
at oracle.ifs.beans.LibraryService.connectLocal(LibraryService.java:522)
at oracle.ifs.beans.LibraryService.connect(LibraryService.java:377)
nullMaybe you could describe what you are doing a bit more. What I gather is that you want to take the pacman cache from the desktop system and somehow (how?) use this to update (or install to?) a laptop.
You can make the desktop cache into a repository with gen_repo - but I forgot to say that you need to check that only a single version of each package is present in the cache (I think pacman -Sc should do that).
If the laptop and desktop are then connected, e.g. by lan, you can set pacman.conf on the laptop to point at this repository (e.g. using NFS). Or you can copy the repository to the laptop and set pacman.conf to point at it.
Another possibility would be to copy the pacman db (/var/lib/pacman/) to the laptop, and the package cache, then use pacman -S to install stuff. For that you don't need gen_repo, etc. Or you could just mount the desktop cache using NFS.
There are all sorts of possibilities ... did you have something particular in mind? -
MSI Fail error when trying to unininstall VMWare Player 7.
I downloaded the trial version of VMWare Workstation 11. When I do the install it tries to uninstall VMWare Player 7. The uninstall fails with the cryptic error message 'MSI Fail.'
I've found various articles about this around the web and even tried a few 'solutions' to no avail. Is there a sure fire way to uninstall the Player so I can try the Workstation?I already found the link you posted and followed it but the player is still on my system so VMW still wants to uninstall it and I get the msi fail error. I also tried the manual removal and that didn't work. In fact I wound up breaking some non vmware stuff. Thank heaven for disk images.
Also, the article mentions the file VMware_Install_Cleaner.zip but I can't seem to find it. Is this something that might work to clear up the problem? Too bad I can't just reinstall the player but there is no option for that. I tried a repair but that was a no go too. Also tried deleting files from my Temp folder which some folks claim worked for them.
Also ran the MSI fixit program from MS and while it said it fixed some things about the Player I still couldn't install VMW. -
Why does my iPhone 5 lose signal when trying to make a call or use cellular data?
Hello,
I've had this problem for a few weeks now and it's becoming really annoying. Every time I try to make a call, or call voicemail, it takes me 10 or so attempts to connect. When it doesn't connect I get 'searching' in the top left hand corner whilst my phone try's to find signal again. I have the same problem when using 3G - it'll be fine for a while and then I lose my signal all together. This happens in places where I have enjoyed full signal strength in the past. I have dropped my phone or done anything to it to cause this. I've checked with my network provider, Giffgaff but it seems to be more of a phone problem rather than network.
Has anyone had anything similar? If so how did you fix it? I'm thinking I need to take it into my local store to get it looked it.Hello Mathias267,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Have a nice day,
Mario -
Error when trying to serve out documents from webserver
Hi, I have weblogic 5.1 installed and when trying to access documents from
the web browser, I get the following page:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
Anyone seen this before and know how to fix?
Gene Kim -
Error when trying to make local repository (solved)
i'm trying to make a local repository for a laptop without internet connection.
on my desktop, the packages are in /var/cache/pacman/pkg and the corresponding PKGBUILD in /var/lib/pacman/local. but whenever i run (as root)
#gensync /var/lib/pacman/local /var/cache/pacman/pkg/laptop.db.tar.gz
i get the following error:
gensync: building database entries, generating md5sums...
gensync: compressing to /var/cache/pacman/pkg/laptop.db.tar.gz...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
i can see the file laptop.db.tar.gz, but it's only 45 bytes!
Last edited by chilebiker (2007-04-18 20:52:37)Maybe you could describe what you are doing a bit more. What I gather is that you want to take the pacman cache from the desktop system and somehow (how?) use this to update (or install to?) a laptop.
You can make the desktop cache into a repository with gen_repo - but I forgot to say that you need to check that only a single version of each package is present in the cache (I think pacman -Sc should do that).
If the laptop and desktop are then connected, e.g. by lan, you can set pacman.conf on the laptop to point at this repository (e.g. using NFS). Or you can copy the repository to the laptop and set pacman.conf to point at it.
Another possibility would be to copy the pacman db (/var/lib/pacman/) to the laptop, and the package cache, then use pacman -S to install stuff. For that you don't need gen_repo, etc. Or you could just mount the desktop cache using NFS.
There are all sorts of possibilities ... did you have something particular in mind? -
Can anyone tell me why I'm getting this error when trying to make visibility variables
I have set these up in previous versions of Illustrator. CS and illustrator 10 worked just fine with Variables. Now I can't seem to switch between data sets. I just keep getting this error when I try to switch from one data set to another.
I'll start with the permissions and see if it changes the behavior.
Maybe you are looking for
-
Hi all experts. I wonder if you could help me create a query. The information I'm looking for is contained in the A/P Invoices and also involves profit centres and accounts. We have a case where our client has made transactions containing profit cent
-
How to read the content of HTML table
Hi All, I would like to retrieve the content of the following HTML table and is wondering whether there are any libraries/jars that could do the job easily without having to write a parser possibly in XSLT: <td class="propType"><b>Address</b></td>
-
My MacBook Pro(early 2011) not turning on
I've had this mac for 5 months already, hasn't given me a problem until now. It was working fine when I used it this morning. I left it plugged in and went to work. So when I came back from work, I tried to turn it on but it doesn't. Every time I pre
-
Hi, What are the reason for "FULL TABLE SCAN"?. Kindly provide reason.
-
How do I fix this issue? I have already reset my password as well as logging out of my icloud and logging back in ... Still not working