Call list: no calls to select

Hi experts,
I have created a call list from a target group with 8 BP´s, and then I have assigned it to a IC Agent.
In WebClient, with the IC Agent Rol, I go to call list, and it appears corretly, but when i click in "show calls" button, it shows no calls to select. I have checked my call list at GUI, and the 8 calls have the Ready status. Anybody knows why don´t appears in WebClient to select?
Thanks in advance,
Paco.

Hi,
now, appears the calls, and the problem exposed before was fixed. But if calls was created from a campaign, when i try to access to the campaign clicking the "show campaign" button, it have no effects.
Anybody can help me?
Thanks in advance,
Paco.
Edited by: frgarcia on Jun 26, 2009 1:26 PM

Similar Messages

Web IC Call List Message - Call locked,completed picked up by another agent

Hi,
For certain Call Lists in the CRM 2007 Web IC, when a call is selected there is a warning message to say that the "Call has been picked up by another agent, locked or completed" .
In the execution progress for the call list in CRM (CRMD_TM_CLDIST - Call List Maintenance ). All the calls have the status ready.None of the calls have the status - locked,executing,completed,cancelled,rescheduled or overdue.
What would be causing this to happen.
Any help on this would be greatly appreaciated,
Thanks,
Dan
Edited by: Daniel Moore on Aug 21, 2009 11:22 AM

Hi CRM gurus,
Can you please let me know which method of which class should be used to create a call in a particluar call list?
Also, can you please throw some light on the parameters required to be passed on to the method.
Regards,
Rohit.

Problem integrating Call-list's call results

Dear SAP experts,
I recently integrated the Call-list and wanted to take it to the next level. I have the call-list, calls, and assignments all set up, along with synchronized connection between the call and it's corresponding Business Transcation.
I was able to find the SPRO path towards defining call results/rescheduling reasons, but was unable to integrate it in my business procedure.
A little background:
I have predefined call-lists defined. I inject calls into them via ABAP coding (triggered by HTTP from my external CTI System).
For instance, every time a "callback" request occurs in the CTI system, it reaches out to SAP CRM by HTTP request and triggers a call creation and transaction creation. The Agent assigned to the call-list then identifies + makes the call directly from the call list.
I am not sure what should happen next... Where do the call results come into play?
Is he required to navigate to the relevant BT (via call list) and record the changes there? or can he record call results directly from the telephony toolbar?
Any guidance on the subject would be highly appreciate!!!
Thanks in advance,
Alon Chanoch
SAP CRM IC: Call-list creation.

Not a setting but a bug that occurs on many Nokia phones, including my N82 with V31 on it. i suggest you try a software update and if that doesn't solve then I don't think there's much we can do about it.
It doesn't bother me so when I see a thread about it I just move along. Do a search on this forum, who knows, You might just find something
Show your appreciation. Hit that kudos button real hard

Call List Mangement - IC Web Client

Hi Gurus,
We are using SAP CRM 2007. I am calling transaction : CRMD_TM_CLDIST using transaction launcher in IC Web Client with team lead business role so that I can Split the Call List, Assign the Call List to CSRs and Activate the Call List. When I select the Call List and right click on to view the list of the commands (as of SAP GUI screen) to work the Call List Management - does not shows me any options (such as split or assign or activate). Does any body know, how to get this work?? please help me out....
Cheers,
Peter J.

Hi John,
Thank you very much for your quick reply and guidance. I know the company which used PCUI - Call List screen, unofficially I came to know that SAP responded this company back saying that, SAP does not have plans to remove this PCUI screen/code from the future upgrades...
Once again thank you very much for your quick responses and the guidance. I will close this link...
Cheers,
Peter J.
Hi John,
2 corrections:
1. We are using IE 8.0
2. Transaction Code CRMD_CLMANAGMENT is not working in CRM 2007, we did the following:
a) Add URL to the URL Repository (SM30 table = crmv_ic_ltx_url) as BSP Application. Application = CRM_BSP_FRAME and Page = Entrypoint.do
b) Create Transaction Launcher entry (CRMC_UI_ACTIONWZ)
c) Crete Logical Link in (CRMC_UI_NBLINKS)
d) Call/Add the logical link to NavBar Profile
e) Add NavBar Profile to Business Role
f) Activate the logical link in Business Role (if necessary)
Cheers,
Peter J.
Edited by: Peter Jacks on Mar 25, 2010 9:30 AM

Automatic Partner Confirmation in Call List Management

Hi guys,
There are two possible ways to deal with Call Lists and the confirmation of accounts that are in this Call List. One is that after selecting the account and ending the call, the account will be removed from the call list. The other is, that the account will not be removed, this is done by call list profile NO_AUTO_PARTNER_CONFIRMATION.
We are using profile NO_AUTO_PARTNER_CONFIRMATION now because it can happen that an employee selects an account from the call list without calling at all. The problem is that even those accounts stay in the list that have been completed, Interaction Record for their planned call gets status completed. This way it is impossible to get an overview of the real status of the call list.
We are looking for a solution to remove the account from the call list once the status is complete.
Looking forward to any hints and help
Thanks
Nicole Lange

Hi Nuno,
it seems like this is going into the right direction! I copied the confirmation profile, selected both fields and assigned it to the role.
I also went to Business Transaction Synchronization > Define Call State Mapping Profile and made the following settings:
1. Call State Mapping: Call State "Complete" and User status "E0003"
2. Alternative Statuses: Call State "Complete" and User status "E0007", alternative Status CANC
3. Status Mapping: User Status "Complete" and Status mapping "completed".
Unfortunately, the system behaviour has not changed. So when I set an Interaction Record to complete and end the call (all is being done manually by the way) the call will not be removed from the call list. Also, the percentage of progress does not change.
When I unflag the field "No-auto completion" all calls will be removed from the list once I selected one. No matter if I set the Interaction Record to complete or not.
I found out that in order to synchronise from transaction to call list an action profile is needed. So I used action profile CALL_LIST_SYNCHRONIZATION and added it to the transaction. However, still the same problem.
Any config that I am missing?
Thanks
Nicole
Edited by: Nicole Patrizia Lange on May 15, 2011 1:49 AM

Call list filtering

Hi, does anyone know if it's possible to change call list display in CRM7.0 Web UI so that all calls in a list are displayed. Currently it only seems to display calls where the start on time has already been reached.
I found this comment in the IMG documentation (Define Call List Dispatching Component Profiles) but haven't been able to find a way to change these standard filtering rules:
"Default Settings
There is a default profile available.
In addition to the profiles you create, call lists use the standard filtering rules. The standard filtering rules use the call's Start On, Stop On, and Maximum Number of Attempts data to limit the number of calls that are available in the call list."
Thanks
Mike

Yes you can filter the calls in call list via following way.
Go to SPRO - CRM - Interaction Centre WEB CLIENT - Additional Functions - Call lists - DEFINE CALL LIST TYPES.
Define one Call list type for ex : ZTEST_CALL
Save it.
Then go to Define Call List dispacthing components NEW ENTRIES then select CUSTOM ORDER CONTROL COMPONENT - It will give you the ZTEST_CALL in result.
Then Assign one Z Class by copying from the Class CL_CLM_INTERACTION_DISPATCHER and then save it.
in the Z class Method : IF_CLM_INTERACTION_DISPATCHER- GET_ACTIVE_INTERACTIONS you can filter the calls. This gets called when you select or open the call list form IC_AGENT role so you can put break point and check.
NOTE: You need to assing this call list type in the transaction CRMD_TM_CLDIST to your call list.

Call list management - urgent

Hi,
I need to generate a call list using campaigns and assign the call list to a number of agents.
Does creating a campaign with communicaiton medium "telephone" generate a call list or a call list has to be generated manually using the target group created in the campaign? moreover, if the list was automatically generated using campaigns, who is authorized to access and distribute this call list? Is it the person who was made responsible for the campaign or the IC Manager?
Second question, how is it possible to divide a generated call list and distribute it to different agents?
Deserving points shall be rewarded , Best regards,
Jacob.

Hi Jacob,
1. The IC manager will be authorized for the generated call list through call list management.
2. The generated call list has to be assigned to Organizational Structure, It will appear in the IC WebClient for the agent.
The IC Manager or Manager assign a call list to the agents through portal.
3. Agents can select the call list that they would like to work on.
Hope It helps.
Regards,
Johnny.

Interaction Center User cannot see Call List

Hi Gurus,
I have created a new call list with some calls and I assign it to an user and I have also activated the call list, but when I enter to the WebClient UI with that user who has a business role which have the option to see the call list, the call list assigned to the user doesn´t appear. Which might be the problem?
Thanks and regards.
Jesú

Hi,
From the top of my head:
GO to the transaction used by the Call center manager
Find the call list
Assign it (depends on your scenario, you can assign it directly to the teleagent or to the Telecenter)
Activate the call list
Sometines, you need to be careful that the teleagent belons to the right Telecenter
Hope it helps,
D.

Reading Call List information of CIC

Hi,
I want to extract the call list and call information for each user assigned ´to any call list in the CIC area.
I need to extract information like:
Number of calls
Calls completed
Calls posponed
Business Partner of the call..
Until now I hava already find some information in tables:
CRMD_TM_IACT                   Calls        !!!!!!!!!!!!!!
--> CL_PID = ID der Call List
CRMD_TM_CL                     Call lists
--> PID = ID der Call List
CRMD_TM_ASSIGN                 Call List Assignments
--> BO_EXID = User
--> CL_PID = ID der Call List
But I do not find the information about the business partner assignments.
Does anybody have some hints for me (e.g. BP assignment table or function modules for reuse).
Thanks in advance
Frank

Hi
try
CRMD_TM_IACT_BP - Business context information: one order and business partner (ACT_ID id activity, act_guid)
if not helpful:
check all CRMD_TM* tables.
Regards
Radek

How can I delete the recent calls list in FaceTime?

How can I delete the recent calls list in FaceTime of my Mac?

Hello muchaim,
After reviewing your post, it sounds like you want to delete the recent call list. I would recommend that you read this article, it may be able to help the issue.
FaceTime for Mac (Yosemite): Make and receive FaceTime calls
FaceTime keeps a list of the most recent calls you made, received, or declined, with the most recent call at the top. To return a call, click the Video button or the Audio button . To remove a call, select it and press Delete.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Can't show multi-phone number in Voic Call list (N...

Before I update the OVI (not show what version), my address book can show multi phone number in both Voice Call, Message and Video Call. But right now, it can't show multi-phone number in voice call list (others are still OK). I can only select the one I wish to show via OVT suit now. Why? This is not good, how can I modify all default setting when I travel out?

Hey Marklai62,
Looks like your C7 is set to use some number as default dial for voice call. You can change it from your mobile by opening the contact->option->defaults. Under this option, set voice call default to "No Defaults"
Regards
Like my post? Give me a Kudos...... Ur problem solved? Accept my Solution :-)

Call List in IC Web Client

Hello All,
I have successfully created a call list and am able to call people from the call list in IC Web Client.
When I click the "Full View" link on the top right corner of the screen, I see a table with the following fields: No, Name, Calling Times, Telephone, Attempts and Call Result.
After selecting the person to call, when I click on Dial button, it takes me to "Interaction Record". I fill the values there and save it successfully. Now when I come to the Call List again, the "Attempts" and "Call Result" columns show '0' and ' ' respectively.
When I have successfully called a person, why is the Attempts column not getting updated and why is the Call Result column empty. Also what values should have ideally gone to the Call Result column.
Your help would be greatly appreciated and rewarded.
Regards,
Khushboo

Hi Carl,
Thanks for your inputs.
To simulate a call:
1.) Configure Contact Center Simulator. (Refer C78 CRM Interaction Center Web Client )
2.) Launch the Contact Center Simulator page
3.) Click on the Information Link under the Telephony head, with information from here you will be able to launch an inbound call to a CIC Agent.
Hope it helps.
Regards,
Khushboo

Assign Script to Call List Business Context

Hi,
I am battling to find a method to assign an Interactive Script to a call list programatically.
the standard method of achiving this is:
1. Transaction CRMD_TM_CLDIST
2. Expand the desired Call List in the left pane
3. Click on the "Business Context" option in the left pane
4. In the right pane, click on the "Scroll" icon (Add IC Winclient Script) and select the script to attach.
This process updates field SCRIPT_ID in DataBase table CRMD_TM_CL_CMPGN (which is linked to Entity Type CRM06189).
I have traed and searched for an FM of Class/Method to perform this programmatically, to no avail - any assistance is appreciated.
Many thanks
Steven

Easiest method to achieve this is as follows.
Create the Campaign.
Select the communication medium as Call.
Select the interactive script which is visible field after you select the comm medium.
Assign the target group in campaign and execute.
It will create the call list with the script.

Activate a call list in CRM using an interface

We are building an interface to create a call list in CRM and we have come to the stage where we want the interface to activate the call list that has been created.
Does anyone know how accomplish this?

What you are suggesting would require a different stored procedure for each table which is what I'm trying to avoid.
Why would it have to be different procedures? You could have all the INSERT statements in a single procedure.
Yes, you could save yourself some typing (well, copying-and-pasting) by using that piece of dynamic SQL. But when may at some point have to fight permissions, you will need to spend times to tweak the code, when there are columns that are not to be copied
and so on. It's possibly more fun, but it is necessarily not more productive.
By the way, there are three flaws in the piece of code you posted:
select @columnList = coalesce(@columnList + ',','') + sys.columns.name
from sys.columns
where object_name(sys.columns.object_id) = @tableName
and sys.columns.name not in ( @keyName )
and is_computed = 0;
The correct result of the construct SELECT @x = @x + col is undefined. You can use FOR XML PATH('') to create a concatenate list. (A quick Google will show you how.)
"NOT IN (@keyname)" means the same thing as "<> @keyname". If they idea is tha @keyname is to be an inclusion list, then you need to crack the list to a table.
And:
exec sp_executesql @sqlCommand, N'@oldKeyId int', @oldKeyId = @oldKeyId
select @newTableId = @@identity -- note scope_identity() won't work here!
Of course, scope_identity() works as long as you capture the value inside the dynamic SQL and return in it an OUTPUT parameter.
By the way, here is one more issue: you need to write the query so that it can handle tables that do have IDENTITY columns.
Erland Sommarskog, SQL Server MVP, [email protected]

Call Lists In IC-Web

Hi All,
In CRM_IC , when click on Call Lists on the navigation bar and select the Call from the Call list and go to Identify Account, I dont see the Contact Partners associated with the selected Call.
Can any one help me in displaying the contact partners associated with the call?
Thanks in Advance.
Krish

Thanks for your suggestion.
Our scenario: We create call list from Campaign not through BP call time. However, when i select call from call list and go to identify account, I only see my Sold-Party (Account). I dont see any of the associated Contact Person with that Account in the <i>Result List</i>. But if i try to search for an account in the Identify account, I can see all the assoiciated contact persons. I was wondering, is there any work around to display the contact person information in the identify account tab when we select a Call from Call list?
I appreciate your time and guidance.
Thanks,
Krish

Call list: no calls to select

Similar Messages

Maybe you are looking for