Send price conditions to external system

Hello,
I would like to send the price conditions to a non SAP system. The IDOC COND_A02 seems to be the solution for sending the price conditions modifications to this system but is there a programm to send an initial set of idocs with all conditions (like RBDSEMAT for materials)? I cannot find any.
Thanks in advance for any help provided.
Julien

Julien,
You can send prices to external system from pricing reports, transaction V/LD. For example, I used this to send sales prices to an external system using pricing report 15. Here you can enter your material selection criteria including, condition type. This will generate a report which you can then send to external systems. I apologize, but I do not remember the menu path from the report result off hand.
Ram,
Make sure you have activated change pointers for message type COND_A, create or change a price and excute RBDMIDOC for COND_A.

Similar Messages

Replicate Conditions to external system

Hi experts,
I'm setting up an interface to an external non SAP system.
With the subscription functionality I already set up the repkication of BP , Rel, Products & transactions via the XIF interface.
Next step is the pricing. I looked and found Idoc message CRMXIF_COND_REC_COMPL_SAVE linked to the same function module but this seems to support only inbound messages.
Next I was thinking to use change pointers. But the question is which Idoc type in crm is suitable for this ( can I use CRMXIF_COND_REC_COMPL_SAVE_M ) and for which object do I activate the pointers in BD52 ? (BEA_CNPL_PL ?? )
Or are there other methods to trigger the sending of idocs to an external systemin this case ?
Thx !!
Edited by: Olivier@eVolution on Feb 29, 2012 2:38 PM

Julien,
You can send prices to external system from pricing reports, transaction V/LD. For example, I used this to send sales prices to an external system using pricing report 15. Here you can enter your material selection criteria including, condition type. This will generate a report which you can then send to external systems. I apologize, but I do not remember the menu path from the report result off hand.
Ram,
Make sure you have activated change pointers for message type COND_A, create or change a price and excute RBDMIDOC for COND_A.

Sending price condition in WBBDLD for POS outbound

Hi experts
I am facing some problem when do configuration in order to send the price condition to POS through message type WBBDLD.
Client is using ZP01 tag price instead of VKP0 as the condition
Below are the config that I have performed but the price is not sending out.
1. (Sales and distribution --> POS interface --> outbound --> maintain POS condition type group) A new condition type group is created that replace VKP0 compared to the original SAP standard one.
2. (Sales and distribution --> POS interface --> outbound --> maintain profile for POS outbound) A new POS outbound profile using the above new condition type group
3. Site maintenance WB03, assign above new POS outbound profile to the specific store
4. (Logistics-general --> assortment --> assortment list --> controlling condition change analyses --> direct entry for creating the worklist --> activation of the direct entry for creating the worklist) tick "direct entry indicator" for 50 assortment list
5. (Logistics-general --> assortment --> assortment list --> controlling condition change analyses --> maintain filter setting for condition types) Add a new row for ZP01 for table no. 901
Really appreciate your advice.
BR
Dom

Hi Honghai,
Actually it's based on the customer pricing procedure. The default one is VKP001. If you assign the other customer pricing procedure in Tcode: OVKK, you should add the condition type to the corresponding pricing procedure.
Jessy

How to send an event to external system?

Hi
I am facing problem in sending the event to an external system.
Initially I created 2 workflows with different itemtypes. One has send event and other has receive event. This works perfectly when I use the WF_OUT and WF_IN agents of the same system.
Now, I signup two workflow server ( running in two PC, on Oracle 8.1.7 ). I have followed the following steps.
a. creating database links.
b. Signing up the system.
c. changing the system status to enabled in Global Preference Page.
In the event subcription in System1 is local, Out agent is Wf_OUT of System1 and the TO Agent is Wf_IN of System2. There is external subscription for the same event in System2 without Agents.
When I run the workflow with send event, the event message goes to WF_OUT agent with the status Ready, but never propogates.
What could be the reason? Can anyone help me?
Thanks a lot.

Hi
Thanks for immediate respose. I tried the ping/acknowledgement example in the biginning itself. It doesn't work. I also tried by changing the agents ( to respective values suitable for my systems) of that example. Then also it failed. The error in that case also same. The message will not propogate from the out going agent.

Send Storage Bins to external system (change pointer, change document, ...)

Hello,
I need to send to my external system the storage bin modifications, namely, insert and delete information.
I haven't found any User Exits ou BADIs to the LS01 transaction.
I'm trying to do this using change pointers, but it doesn't seems to exist a standard way to this either, so I've created a custom Change Document for the LAGP table, but there's still no records in the CDHDR or CDPOS tables.
Is there a way to automatically generate this records without programatically calling the Change Document associated FM?
What are the options that I have to do this?
Thanks in advance,
Rui

Hello Rui,
perhaps you can use DBTABLOG (Think about data volume and performance).
http://help.sap.com/saphelp_40b/helpdata/en/34/60b6bfae724effe10000009b38f91f/content.htm
Best Regards, Dirk

How to send IDOC's to external systems

Hi everybody,
I'd like to get information of how I can send one IDOC to an external system.
I have to send data about access control and e-learning from R/3 to external system, I think an IDOC is the perfect way to do it, but I don't know all the steps involved.
Could anyone explain me or give some document or link in with I could see all the steps from the selection of the IDOC (What to do if the idoc doesn't fit exactly) until the IDOC is out of the r/3 system, how to configure the ALE, etc
Thank you very much.

This document might be helpful:
http://www.angeli.biz/www5/books/IDocBook/IDocBook.pdf
It's a bit outdated but most of the info is still actual. If you anticipate a lot of ALE/IDoc projects, I suggest getting this book: http://www.amazon.com/IDoc-Technologies-Prima-Techs-Book/dp/0761534318/sr=8-1/qid=1170864257/ref=sr_1_1/103-6659593-2860615?ie=UTF8&s=books
It is out of print right now but I've heard that more copies are coming out this year. This is the most comprehensive book available on the market at this time.

Sending Purchasing record to external system by Idoc

Hi,
We need to send Purchasing Info Records to external system via idocs when a Purchasing info record is created or changed.
Please let me know how can we do this.

Check with your technical team message type INFREC for Purchasing info record.Create one custom program and this should check the inforecord new ones and changed ones then it should trigger idocs in background then it sent to external system.To do this automatically setup custom program batchjob.

IDoc or BAPI to send Usage Decision to external system

Dear SAP experts,
I am searching for an IDoc or BAPI which allows me to send the Usage Decision (on a QM Inspection Lot) to an external system.
Can anyone help me with this? Please advice.
Best regards,
Kenny

I think there is no standard IDoc that can be used. But you can define (customize) a follow up action for the usage decision in R/3. This follow up action could be a Z_* program that triggers a custom IDoc. This would suit your requirements I guess!
Regards,
Kai

How to send delivery document from external system to ECC

i have a business requirement to send a delivery and billing documents from external system ( MS access ) to ECC
could any one light me how to do this ???
Thank you in advance

Hi Ahmed,
Talk to your middleware team, They will upload the data through RFC.
Basiclly RFC(Remote function call) works like it will call the function module and then upload the data.
For more information, check the link given below.
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
Hope this helps,
Regards,
MT

How to send price condition changes to external system

Hi all,
By using trans: VK11/VK12 we may add and change pricing conditions for a particular condition type.
We want to send to PI changes beeing made (for amount, date interval, e.t.c...). Our condition type is ZPRB, involving the following table to be changed: A090, A662, A677, A663 (in addition to KONH/KONP).
We thought we could program changes/insertions in the process to a new table refering the changes, and use a proxy call to be triggered upon this table, but unfortunately these transactions (VK11/VK12) does not contain any User Exit. So we have to make changes to the standard SAP if we go for that solution.
My question is therefor: Is there a better way of transferring the price changes made by these transactions (ALE/Changepointer, BAPI, IDOC, e.t.c...).
Please advice and describe what is the best solution?
Best regards
Leif Lohne.

Good idea. Doing this exposed 2 problems:
1 - First problem: The program changes in the midi file work from logic, but not when the midi file is played from a Mainstage external instrument channel strip. So it seems that Mainstage is stripping out the program changes. (Any note play information in the midifile is played from Mainstage, but not the program changes.)
2 - Second Problem: The sys ex event instruction (I typed in manually in the event editor in logic) to change performance modes on the external keyboard is not working from logic either... So I must be doing something wrong? I have to create the sys ex event manually, since the external keyboards I'm using don't transmit mode changes for me to record into a midifile. In this case, I'm using a Yamaha S90ES, and manually created the sys ex event in logic for mode change to Voice:
Yamaha S909ES Voice mode: $F0 $43 $11 $7F $01 $0A $00 $01 $00 -$F7+
However, the mode does not change when the file is play back from logic...
Sure appreciate your help...

Send IDoc from External System to SAP system

Hi Folks,
I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
Kindly let me knowq how I can achieve it.
Regards,
Santosh

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

Different PO item number in SAP and in external system

We are sending Purchase Orders to external system via Idoc and receiving dispatch advices (Inbound delivery) from the external systems via Idoc. In SAP PO line items are numbered as 10,20,30....... In the external system the line items are numbered as 1,2,3........
So when Inbound delivery is received into SAP from external system it is failing due to line item numbers are not matching.
I got info that this issue can be resolved by using fields E1EDL24-POSNR and E1EDL24-POSEX correctly. I do not know exactly how.The Idoc type used is DESADV.
Please help with this issue.

You can see these fields in WE02 when you process with your idoc number.If you want to edit idoc POsnr from 1...10 then you can edit idoc through we19 transaction.
If you want perminanat solution then check with ABAPer to pass one zero after line item number as your external system passes 1,2....10..etc.
This can possible check with your technical team.

Consuming a web service from external system

Hi exepert,
I'm new in web service, I have to send a file towards external system so I think that I have to expose
my web service in sap system.
How, the external system, can understand that I exposed my web service, in other word that my file is
ready to be sent ?
tks, bye.

I am not sure if web service is a right fit for your issue but web service is accessed from another system using a URL(Uniform Resource Locator) which will be generated when you create a web service using SE80 or by running the wizard.
The other system might not know that you file is ready, I suggest to write a sequential(repetetive) program in the target system and check by using the URL and check if the file is ready. If the file is ready pick the file else repeat the step.

Modify PO from external system

Hi all,
We are implementing SRM 5.0 with extended classi scenario.
Until now we have a R3 system where we create PO, but we also have got a functionality for modifing particular information of PO in a lagacy system, that comunicate with R3 between idoc.
Now we migrate the lifecycle of PO in SRM, but the legacy system remains.
Wich is the best way for modify a PO from a legacy system in SRM?
thanks
enzo

Hi,
You can try multiple methods ( mostly non-standard), one is use the SRM function modules to update PO, when you send the data from external system, other method is PO response( send the changes from external system as PO response in SRM).
Hope above methods will resolve your issue.
Thank you
Sreedhar Vetcha

Publish idocs to external system

Hi,
We have a business requirement to publish Idocs to an external system, however we don't have any kind of middleware to perform that action.
Since it is HR master data, we can use change pointers internal table, to create a flat file with that data, and the external system could read it from a shared folder.
Do you know other options to send idocs to that external system? There is any function to publish idoc via webservices for example?
How can I solve it technically?
Thanks in advance!
Luis Teixeira

HI,
Check if this code for automatic processing of idoc helps you.
REPORT ZFI_BD87 NO STANDARD PAGE HEADING
                MESSAGE-ID ZZ
                LINE-SIZE 132.
*& Program Name          : ZFI_BD87                                  *
*& Module Name           : FINANCE                                   *
*& Author                : DEEPTHI REDDY KAUKUNTLA
*& Creation Date         : 09/22/2006                                *
*& Program Type          : Report                                    *
*& SAP Release           : 4.6C                                      *
*& Description           : To automate the manual IDoc              *
                          processing.                               *
*-- TABLES
TABLES: EDIDC,         " Control record(IDoc) Table
        EDIDS.         " Status Record (IDoc) Table
RANGES : R_DOCNUM FOR EDIDC-DOCNUM.
*-- INTERNAL TABLES
*-- Table for holding Control Record details.
DATA: BEGIN OF IT_EDIDC OCCURS 100,
      DOCNUM LIKE EDIDC-DOCNUM,
      UPDDAT LIKE EDIDC-UPDDAT,
      UPDTIM LIKE EDIDC-UPDTIM,
      END OF IT_EDIDC.
*-- Table for holding Control Record details.
DATA: BEGIN OF IT_EDIDS OCCURS 100,
      DOCNUM LIKE EDIDS-DOCNUM,
      STAMID LIKE EDIDS-STAMID,
      STAMNO LIKE EDIDS-STAMNO,
      END OF IT_EDIDS.
*--                 Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK S WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_STATUS FOR EDIDC-STATUS,
                 S_MESTYP FOR EDIDC-MESTYP,
                 S_UPDDAT FOR EDIDC-UPDDAT,
                 S_STAMNO FOR EDIDS-STAMNO,
                 S_STAMID FOR EDIDS-STAMID.
SELECTION-SCREEN END OF BLOCK S.
*-- START OF SELECTION
START-OF-SELECTION.
PERFORM GET_IDOCNUM.
*&      Form GET_IDOCNUM
      text
--> p1        text
<-- p2        text
FORM GET_IDOCNUM.
REFRESH R_DOCNUM.
CLEAR   R_DOCNUM.
SELECT DOCNUM
         UPDDAT
         UPDTIM
         FROM EDIDC INTO TABLE IT_EDIDC
                   WHERE STATUS IN S_STATUS
                   AND MESTYP   IN S_MESTYP
                   AND UPDDAT   IN S_UPDDAT.
IF NOT IT_EDIDC[] IS INITIAL.
    SELECT DOCNUM
           STAMID
           STAMNO
               FROM EDIDS INTO TABLE IT_EDIDS
               FOR ALL ENTRIES IN
               IT_EDIDC WHERE DOCNUM = IT_EDIDC-DOCNUM
               AND LOGDAT = IT_EDIDC-UPDDAT AND
               LOGTIM = IT_EDIDC-UPDTIM
               AND STAMNO IN S_STAMNO
               AND STAMID IN S_STAMID.
    LOOP AT IT_EDIDS.
      R_DOCNUM-LOW = IT_EDIDS-DOCNUM.
      R_DOCNUM-SIGN = 'I'.
      R_DOCNUM-OPTION = 'EQ'.
      APPEND R_DOCNUM.
      CLEAR R_DOCNUM.
    ENDLOOP.
ENDIF.
IF SY-SUBRC = 0.
    SUBMIT RBDMANI2
      VIA SELECTION-SCREEN
      USING SELECTION-SET 'VARIANT'
      USING SELECTION-SETS OF PROGRAM 'ZFI_BDC87'
         WITH SO_DOCNU IN R_DOCNUM
         WITH SO_MESTY IN S_MESTYP
         AND RETURN.
ENDIF.
ENDFORM.                    " GET_IDOCNUM
regards,
deepthi

Send price conditions to external system

Similar Messages

Maybe you are looking for