Call off fixed quantity if contracts exits where to add in SAP?

Hi All,
Can you please help me on the next one:
We have a MM Quantity Contract for 100.000 PC.
Every time we call off for this contract the call off quantity is 500 PC.
Where can I put these 500 PC in SAP?
Can this be done on Contract level? Or must this be done on material
master?
Best regards,
Eric.
Points awarded!

Hi
When you are creating the release order wrt a contract, you have to enter Quantity manually.Even in the Best practice of SAP in 6.0 version also given the same.
Refer the link
http://help.sap.com/bp_chemv1600/Chem_US/Documentation/Q80_BPP_EN_US.doc#_Toc158443100
Page number 25 and point number 6.
In your case, the call off order qty is same, Please search any exist to pass this value (you can maintain this value in Contract line item details screen.Field Standard release order quantity <b>ABMNG</b>.)
Regards
Ramakrishna

Similar Messages

Service based revenue recognition (u0091Bu0092) contract with call off

I am trying to understand Revenue Recognition. I have come across the above term." Contract with call off"
Can anyone tell me what exactly this means.

Dear sap
The contract consists of items defining the individual materials, material groups, or services with prices and in many cases quantities.
An item is assigned to an item category, which defines the type of procurement (e.g. item category K for consignment, or L for subcontracting).
An item of the procurement type "external service" contains a set of service specifications. Such specifications may be hierarchically structured. The summary view of such a hierarchical structure is termed an "outline", and the individual levels of the hierarchy are referred to as "outline levels". Quantities are specified in service lines. Services can be released (<i>ordered, or called off against the contract</i>) at item level or at the level of the service line.
Thanks
G. Lakshmipathi

How to make it mandatory for a call off order to reference a contract.

Hi,
How do I make it mandatory for my call-off orders to reference contracts?
Thanks.

Hi,
Make the field: "Outline Agreement" in the field selection group assigned to your calloff PO document type.
Umakanth R

Contracts and Call off's

Hi,
A customer can create a contract or a bulk order in the system.
This can be referenced by call off orders.
One system can have multiple contracts and call off's.
1 - Are there standard system settings that are considered when a call off is referencing a contract order?
As in, what are the critera that a call off order will check in order to reference contract A or B.
2 - Say call off order B is created by referencing contract A.
I dont want the pricing in contract A to copy to call off order.
How can this be facilitated?
Thanks in advance!

Hi,
1 - Are there standard system settings that are considered when a call off is referencing a contract order?
As in, what are the critera that a call off order will check in order to reference contract A or B.
Yes when your Call off order is referenced with contract then it will appear in tab ACCOUNT ASSIGNMENT at item level
after save of call order it will appear in document flow
When system referring contract then there are various criteria check by system that you can check in COPY CONTROL SALES DOCUMENT TO SALES DOCUMENT by t-code VTAA check at header level and item level what routine are set
If you set outline agreement massage indicator in call of order by VOV8 under transaction flow tab, then even you not reference contract and individually creating call of order and once you put sold to party system will check is any contract available with this party.
2 - Say call off order B is created by referencing contract A.
I don't want the pricing in contract A to copy to call off order.
How can this be facilitated?
For this if you want to keep PRICE PROCEDURE same for contract and call of order but only want new price values in call of order then in copy control VTAA at item level set PRICING TYPE - B carry out new pricing
If you want to assign two diffrent price procedure then differentiate by DOCUMENT PRICE PROCEDURE
set two different document price procedures in Sales document by VOV8
and determine two different pricing procedure by OVKK in both documents
Kapil

GR is not equal to contract call off quantity, what to do?

Hi,
I have a contract (not a scheduling agreement) with 1000 PC and my call off is 40 PC per purchase order. When I receive 30 in SAP, my open quantity is still based on the 40. What is right, because I can receive the next 10 tomorrow. But when I know they are not comming, what action needs to be performed?
Best Regards,
Eric

Hi
If you want to update the Contract quantity, you can go to change mode of the release order and change the quantity from 40 to 30.Otherwise you close the Purchase order by Delivery completed indicator.But this will not update the open order quantity of a contract.
Regards
Ramakrishna

MK contract and received quantity (GR through call off PO)

Hi,
I have a MK (quantity) contract, and I call off with Purchase orders.
Can somebody give me a transaction or a abap report name which
is capable to show me: contract target quanity; PO order quantity AND
GR quantity? The latter is the most important.
Best regards, thank you in advance,
Eric.

Dear eric,
Try to use ME3M, enter the material and plant, scope of list = ALLES.
You need to combine with ME2M.

Pop up to link Call off order to Quantity contract

Hi,
when a call off sales order is created in VA01, SAP checks automatically if there is an open quantity contract.
If this is the case, a pop up is shown showing contract number and asking if sales order should be referenced to the contract.
Question: do you know which settings trigger this pop up to show?
Thanks in advance!!
BR

Hi BR,
In Order Type ( VOV8) you will find the triggering point of this pop up settings. Under Transaction Flow section in 'Outline Agreement Mess' Radio button setting. You can control the settings at Header Level and Item level subsequently.

Contract - costs only charged in first PO call off

Hi All,
My client has the following requirement:
A contract is created and saw costs are fixed = 10 Euro.
The 10 Euro must be paid once. While creating the first PO call off.
After the first PO the costs should not be copied into the next PO.
Is this possible in SAP??
Thank you,
Eric van Zundert.
Edited by: Eric Van Zundert on Jan 29, 2008 9:14 PM

Hi,
for getting your problem solved you need to create a new cutomes (Z) calculation schema in which should be exact replica of RM000 but only you need to delete PB00 condition type from the control data of this calculation scema. As PB00 will have access sequence, by removeing this condition type PB00 which actually searches the condition record in the condition table for the last PO price, the system will not search for any price. so whenever you create a new PO the system will not propose any price infact it ask the user to fed the price in the system.
in general just keep PBXX as a price condition in your calculation schema
hope this helps
Regards
Vikrama

Contract details i.e currency, Payment term are not copied into Call-off

Hi,
We have implemented SRM 4.0 (SP07) with extended classic scenario.
we created a PO through "Process Purchase order" & referred a line item to a contract (in the sense we are creating a call off) however when PO is ordered, system doesn't pick currency, Payment term & incoterm
maintained in contract header level into PO header but instead pick
that data from Vendor master in SRM (BBPMAININT).
Here is what we have maintained in Contract & Vendor master.
Contract No: 4800002324
Contract Currency: Euro
Payment Term: 60 days net
Inco term: CIF
Vendor master details
Vendor no: 106864
Currency: SEK
Payment term:030N
Inco term: DDP
If we perform similar test in R/3 then system behaves according to
standard.System copies currency, payment term & incoterm from contract header into PO header.
If this behaviour is possible in R/3 then why not in SRM ?
Has anybody witness simmilar problem in SRM so far..?
Any help will be awarded with full points..
BR
Bharat M

Hi
Note 970992 - Purchase order currency overwritten by partner dflt currency
The standard functionality is that the vendor master currency supersedes the SC currency as the final PO is generated for the vendor with whom the company is dealing in a particular currency.
Re: Currency USD differs from Purchase order currency EUR. Enter in PO cur
As per the old accounting system the journal books were maintained for every business partners in his currency. These entries comes to the G/L of the company in company's home currency.So it is the standard functionality that the PO will be generated in vendor master currency and not the SC currency.
Related links ->
Re: Currency Issue
How to maintain a Vendor currency in SRM
Hope this will help. Do let me know.
Regards
- Atul

SRM 7.0 Call offs against Central contracts

Hello,
We are implementing Central contracts in extended classic scenario.We found that when call offs are done in srm by creating a PO in SRM with central contract as Source of supply, the Central contract fields in PO Line item does not get populated when the PO is transferred to ECC.Nor does the Release value get updated against the Backend contract (as seen in ME33K) though the release value is getting in SRM Central Contract document.This makes the release values in ECC Contract document out of sync with the value in SRM contract document.
Has any one faced this issue? Is this because of a missed setting or Is this a bug or is this the way it works?
Thanks
RamanAK.

Hi
give more details of the CCTR contract USAGE in the existing landscape
i could remember the PCTR behaviors in the ECS mode..
Actually contract information will not be transfered in the PO line when replicate to ECC since this contract is local.
the release values are available only in SRM front end ( total value of contract as well as each line of contract vs PO released).
Did you distribute the contract to backend system as well ?
so now your contract is available for both system
i.e ECS - shopping cart - SRM
and ECC purchase request as well - ECC
Are you enjoying the contract in the both systems?
Earlier GOA release values are updated in SRM via BLAREL idoc technology
but now adays in CCTR interfaces
PurchaseorderErpcontractReleaseNotificationOut - ECC
PurchaseorderErpcontractReleaseNotificationin - SRM
The release value synchronisation continous challenges to the BUYER .
So please clarify with SAP how SRM PO release value and ECC PO release value sync in the ECC purchasing contract.
dOUBLE CHECK
PurchaseorderErpcontractReleaseNotificationOut - ECC
PurchaseorderErpcontractReleaseNotificationin - SRM

Copy customer PO in da contract to the call off order

Hi,
Is there a way to copy the customer PO (vbak-bstnk) from the contract to the relevant call off orders? Can this be done through copy controls??
Thanks,
Keshini

Hi ,
You can copy the purchase order no to the subsequent order by making chnages in copy controls.If you want to copy the whole data then do the same as suggested above.If you are not copying the whole data ,but copying some information from contract then request your abaper to add the field VBKD:BSTKD in routine header business data .
Hope it will work.
Regards,
Pasapula.

Help with contract or call off orders.

Hi,
At current we are very light users of SAP on the purchasing side. We use purchase requisitions with a bespoke workflow which are then transferred into purchase orders and emailed out.
We are looking at implementing contract or call off orders for services we purchase, eg support that gets invoiced once a month. We can then enter the invoice against one of these orders.
Can anyone point me in the right direction of what the best solution to use would be and how to go about setting them up.
Thanks

Hi,
You can use a framework order to execute that process, as long as you know how you want to spend in a financial year and there will be no need to created goods receipt , framework orders only work with Framework Order and Invoices for payment.
Thanks
Silas

HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

Open Order Quantity in Contracts

Dear Gurus
I am trying to create a report which will show the Open Order quantity of SD Contracts.
This being the figure of the target quantity less the called off quantity.
Please advise on the best method of getting this information, I can see the cumulative order total in the contracts but this is held in a structure (RV45a- KWMENG) and I am struggling to get this information into a report
Many thanks
Tony

Hi Tony,
To the best of my knowledge you will not be able to read value into your report from RV45A- KWMENG. To get this value you need to first fetch the list of subsequent SD documents from VBFA table. Later you need check status of those documents both at header and item/s level using VBUK and VBUP. If you find the open items for documents you need to sum up all those quantities to arrive at a open quantity for the contract using tables VBAK and VBAP
Please keep in mind performance issues which may arrive in this process as it deals with linking of 5 tables. You may need additional database index for the table VBAK (Thanks to check on this point).
Below information may be useful to activate the index:
To activate the index, proceed as follows:
1. Call transaction SE11 and enter the database table VBAK. Choose "Display" and then select "Goto -> Indexes" (Ctrl+F5) in the menu.
2. Double-click the entry I01.
3. Change the option to "Index on all database systems".
4. Activate the index (Ctrl+F3).
5. You must collect the database statistics for the index so that the optimizer can recognize the index (transaction DB20).
Hope this helps you.
Regards,
Praveen

Open quantity in contracts which have calloffs archived

Hi all!!
We have contracts with their corresponding calloffs created. If the calloffs are archived, how can we obtain the open quantities in the contract in a Z-program? That is, which fields have to be checked? In VBUK table there is no "archived status" or soemthing like that. In table VBUP there is a field RFGSA which indicates if the item has been referenced totally or partially but I don't how to use it together with any other status.
Example:
Contract 1000 pcs.
    Call off: 500 pcs archived
    Call off: 400 pcs archived
There are still 100 pcs. opened but in our report it's displayed 1000 pcs as opened.
How can we get that 100 pcs are opened and 900 are archived?
Thanks in advance for any idea & best regards

Hai icasado,
In standard SAP
Contract - SO will updates once it is processed.
In case in sales order is      rejected with some reason then the quantity will flow back to contract.
For the similar requirment we had made enhancement in sales order to check
At the time of saving sales order, system check
what is the refereed contract
for that what is list of sales order prepared
(Contract - Sales order quanity) - Current sales order qunaity = X
1000 - (500+400) - 1000 = -900
If X is less than 0,
system displays ( Contract qty + -900) = 100
Only 100 Mt can be allowed.
Regards,
Mani

Call off fixed quantity if contracts exits where to add in SAP?

Similar Messages

Maybe you are looking for