Call waiting not functioning properly.
Hello there, I would like some help with my Nokia N95 8GB. When I try to get my phone to tell me when there is a call waiting , it says it didnt work, (Not fullfilled) please, help me with this matter ! Best regards Andreas.
Hi, Rashnavadi.
Thank you for visiting Apple Support Communities.
Check to make sure call waiting is enabled on the device. This feature is located in Settings > Phone. If the issue persists, you will need to contact your carrier to make sure your account is provisioned for this feature.
iPhone: Understanding phone features
http://support.apple.com/kb/ht4515
Cheers,
Jason H.
Similar Messages
-
Call Log not functioning properly
I recently updated my phone software to 210.21.006 and my hardware is Nokia E71-1.
Have observed problems with the call log after that. Behaves erratically like not recording any calls (missed, dialled or received) inspite of 20 calls per category not being filled.
Very disturbing when I can see the missed call notification on the home screen but not able to see the callers.
Please helpMy skype call forwarding doesn't work for last couple weeks too.
It doesn't forward calls when I'm online nor offline. -
The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.
This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
X120E Multi Core Warning -The hardware is not functioning properly. What now?
Ran the Thinkpad ThinkVantage Test and received a Warning on the CPU Multi-core test.
The hardware is not functioning properly. To correct the problem:
Turn off the system.
Detach the power cord and wait for one minute.
Re-attach the power cord and re-boot the system.
Re-run the test.
Performed the above, still receiving the warning.
What next?Have you contacted Lenovo Support? The only thing I can think of is either a straight-up hardware defect or maybe cooling fan blockage of some sort. Could be the RAM, though it's unlikely. Still, if it consistently has this issue, and something like Prime95 errors out on one of the cores, you may need to RMA it.
-
DNS feature not functioning properly
DNS feature not working properly after latest update. When DNS is active calls from Favorites do not go through and is sent to voicemail. Texts from favorites also do not go through. Why even have this feature when it does not function properly.
I assume you mean DND. Double check the settings to make sure your favorites are permitted. Reboot the phone if they are not coming through.
Text messages will NEVER sound an alert when DND is turned on, regardless of whether favorites are allowed by DND. Only calls are allowed. -
Satellite P300D-110 integrated webcam is not functioning properly.
Hello everyone,
as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
*How did this happen?*
You tell me. This is how it went;
* Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
* Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
To give a quick summary of the thread;
* Using Camera Assistance Software provided by Toshiba I can take pictures.
* Using Camera Assistance Software provided by Toshiba I can record sound.
* Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
* I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
* I have downloaded and isntalled the latest drivers from the Toshiba website.
* My laptop is about a week old.
I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
And if possible WITHOUT having to reinstall Windows Vista Home Premium.
I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
Sincerely,
a sad customer.Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow. -
after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problemThere may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem. -
The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!
OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
1. Powered off my MacBook and removed everything connected except for the power chord.
2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
Just added another couple of years usage with my aging mac :-) -
The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
NinaMany InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning. -
HT1665 Bluetooth on my IPhone 3GS seems not function properly
Bluetooth on my IPhone 3GS seems not function properly. How to check and rectify it.
It would help if you explained what you mean when you say it doesn't function properly. What are you attempting to do? What happens when you try? What troubleshooting steps have you already taken?
-
Why do QTVR interactive images do not function properly or at all?
QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
http://www.edfruinphotography.com/MILLCITY_2.htmlI have Safari 5.1.7. I am using Mac Snow Leopard.
That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General. -
Click and Drag in OS X Yosemite 10.10.3 is not functioning properly on desktop folders
The click and drag on my Mac 10.10.3 is not functioning properly. It won't allow me to click and drag folders on desktop or dropping them into emails. Thought I looked every where for solution....... Any input would be appreciated.....Thanks!
Select
View ▹ Show View Options
from the Finder menu bar. In the dialog that opens, select
Sort by: None -
Why are my firefox icons and tabs not functioning properly?
My firefox is not functioning properly since Monday. I have tried uninstalling and installing firefox but the problem is still there when I open it. Please help.
Unfortunately, the most likely explanation is an incompatibility with your graphics card/chipset driver software. One of the effects of Safe Mode is to disable Firefox from using hardware acceleration. To turn that feature off in normal mode as well:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
This takes effect the next time you exit Firefox and start it up again. Any difference? -
My iPad is not functioning properly, I want to restore it. but I'm unsure if my Minecraft world will be saved in the backup. Please help, I need to use it ASAP
How to BackUp
http://support.apple.com/kb/ht1766
See iTunes will backup the following Information Here...
http://support.apple.com/kb/HT4946 -
Cropping tool does not function properly in Photoshop CS3
Cropping tool does not function properly in Photoshop CS3. Always crops to .004" x .004". Tried reinstall with no luck. Any fixes out there?
Reset the tool by right-clicking on the crop tool drop-down/fly-out menu in the top options bar (big crop tool icon above the tools panel, when the crop tool is selected). Be sure to check there aren't values in the crop tool by hitting the clear button in the options bar.
Maybe you are looking for
-
How to add two list in one frame using REUSE_ALV_LIST_DISPLAY
Hi, I want to display two list in single output by calling FM 'REUSE_ALV_LIST_DISPLAY' twice. I saw one topic posted by Arunava Das as 'ALV Problem' but didn't get the steps to do that. Here is his way of doing that "What I have done is gone for the
-
My iphone 4s will not update to ios 7. I'm trying to update this through my imac because the iphone will also not connect to my home wifi. I've tried several different things but nothing is working. I deleted enough pics and apps so there is enoug
-
Hi All, I have a client requirement for citibank integration where the client has provided the following format for extracting a report. Country Code Payment Method Value Date Payment Type Payment Currency Payment Amount Debit Party Account or Other
-
Dear Experts, I have done the necessary configuration for planned order scheduling in R/3 and ran MRP with lead time scheduling. While running MRP i am doing capacity levelling. From graphical planning table i am able to re-sch
-
Alert for failed disc in RAID array
is there a third party software that will alert when a disc in a raid array is degraded or failed? right now, i have to open raid utility to see this. i would like to get a small alert so i can replace the disc quickly. any ideas welcome. thanks