Called for Service -Internet

I don't have internet service since Friday Oct 15th. Verizon customer serv opened a ticket yesterday the 17th.( ticket {edited for privacy})A technician showed up today to fix the problem. He claimed the jack I have my router and modem were connected is not working. He moved them to the kitchen and left everything on the kitchen table with the modem sitting on top of the bananas in the fruit bowl. Very TACKY and unprofessional. How do you expect me to serve my family meals w/ all wires ,modem,router and telephone all over the table?
Do I have to unplug the the connection for me to use my wall outlet? I want someone to come and fix this mess your technician made. I called your customer serv and I was transferred 5 times and on hold for 55 minutes,finally an actual person answered but the connection was so poor. She asked for an alternate # to call me back. I gave her my cell # and it's been 20 minutes no call back yet. I am expecting a reply for my complaint.
Also, Another verizon technician to fix this mess made in my kitchen. This was my first experience for being dissatisfied for the work Verizon done. I have been a customer of yours for years and years and would like it RESOLVE!

Just a friendly reminder, this is a forum where users help other users. Please have patience and wait for a return call. If you do not get one, contact our customer service team via live chat or email at:
http://www.verizon.com/contactus

Similar Messages

"cpu fan not functioning. check fan connections and call for service."

wondered if a different failure than than "CPU fan has failed ... system will shutdown in a few seconds". I have a DX-2000 P4 desktop running XP SP3 which I just changed motherboard and CPU fan on. All fans are spinning at close to same speed. (P/S,Chassis and CPU). Not extremely fast but cant see vanes. Computer has sat for several years. Wondered what the actual test is and how fan speed is regulated. I guess temperature sensors are built into the cpu, somehow there must be a varying voltage applied to fans to change their speed and/or a measuring device to see what their rpm is. This must be controlled by the BIOS as the whole pass/fail test is. My next step is to put back the old fan and see what happens. I have a new p/s to install should be here today. Actually used but cleaned and tested. Saving a cleaning chore. Not sure if my older supply might be causing the issue with low volts.
This question was solved.
View Solution.

If the fan is slower than the factory fan you will have that problem.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Can I have a blackberry and not pay for the internet service package?

Hi I am new to this and my t-mobile phone that I have broke and I am looking to upgrade to something that will help me stay a little more organized but do not want to pay for the service package that comes along with buying a blackberry from t-mobile. I know that I could get one from craigslist or ebay or something and was wondering if I could just put in my Sim card and it would have all the basic functions without the internet and emails. All i really want from the phone is the easy navigation, good organizer, easy texting and calling. Thanks for the help! - Sully
Solved!
Go to Solution.

Sully, Greetings, and welcome to the BlackBerry.com Support Forums.
Sorry, no. Without the BlackBerry Data Plan, you will get very few of the data functions of the device... voice and SMS, yes. Calendar, contacts, etc., yes. No RIM push email.
You can use the Opera Mini browser for the internet with the TCP setttings enabled, for a browser for free... just watch your billing and make certain you are not charged.
http://www.blackberryfaq.com/index.php/What_are_the_TCP_and_APN_settings%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I recently upgraded my internet service with Comcast for faster internet. When I user ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why?

I recently upgraded my internet service with Comcast for faster internet. When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why is the speed so different and are there settings I can change to increase the wireless speed?

If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
Diagnosing network issues

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

How to make a PDF form call Web service and return a static pdf for user to print?

Hi all,
Can anyone help me regarding the feasibility of using PDF forms for my following case?
I would like to create a Dynamic pdf form. User only have the Acrobat reader. they can enter some information. Then have a submit button. when user click the submit button, it can call the web service with data. then Web service returns a Static PDF document based on data and the user can print it out. (and maybe save as separate pdf file)
1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
2. As I understand I need to have Live Cycle Designer to create a pdf and make it Reader Enabled. So user can user reader to call webservice? am I correct?
3. What minimum reader that user need to have? PDF reader 7 or above?
4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
Thanks a lot

We have done a similar approach in the past and yes, it can be doable.
1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
Srini: We have developed a Servlet to talk to Webservice. Based on the Webservice response, the Servlet, prepares the Byte stream and sends it to Webbrowser to display as a PDF. The PDF data was submitted to Servlet in XML format.
But if you do not want to use the above approach, then you have to use the Workbench Process.
Submit the PDF data to a Workbench process and the inside process, execute Webservice Service with the data. Once the response is received, prepare the data XML and render a PDF with it.
To do this, you need LiveCycle Server and Reader Extensions server component.
2. As I understand I need to have Live Cycle Designer to create a pdf and make it Reader Enabled. So user can user reader to call webservice? am I correct?
Srini: If you want to use the Servlet, you can Reader extend the PDF with Acrobat.. But if you want to submit the data directly to Webservice, then you need Reader Extensions server component.
3. What minimum reader that user need to have? PDF reader 7 or above?
Srini: Not sure but Reader 8 and above should work.
4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
Srini: If you use the Servlet approach, then you can re-use the same webservice. But if you want to submit directly to the same webservice, you may need to change it to suit your data XML.
5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
Srini: If you use the Servlet approach, you do not need any server component but other approach, you need Livecycle Server and Reader Extensions server component.
Thanks
Srini

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

Error calling for web-service from BPEL

hello,
I'm getting an exception thrown when I try to call for a web service. Until yesterday it was fine, but since today we keep getting this error message:
<2006-05-29 21:02:03,635> <ERROR> <red.collaxa.cube>
<BaseCubeSessionBean::logError> Error while invoking bean "finder": Instance not found in datasource.
The process domain was unable to fetch the instance with key "c2c73aae36359a11:84cc09:10b7b50ebef:-7d45" from the datasource.
Please check that the instance key "c2c73aae36359a11:84cc09:10b7b50ebef:-7d45" refers to a valid instancet
hat has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "c2c73aae36359a11:84cc09:10b7b50ebef:-7d45" from the datasource.
Please check that the instance key
"c2c73aae36359a11:84cc09:10b7b50ebef:-7d45" refers to a valid instance that has been started and not removed from the process domain.
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:314)
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:262)
at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:235)
at com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:177)
at IFinderBean_StatelessSessionBeanWrapper42.lookupInstanceByConversationId(IFinderBean_StatelessSessionBeanWrapper42.java:669)
at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:420)
at displayInstance.jspService(_displayInstance.java:111)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Any ideas how I can fix it?
Thanks.

Hi,
We've tried increasing the
<transaction-config timeout="60000" /> to 120000, and also tried increasing the syncMaxWaitTime from the console...
But nothing seems to help.
In addition, the test page of the web service we are invoking returns after 1 second (so there shouldn't be a latency problem)
Maybe you have any other ideas?

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a pho

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?

Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.

How to save web service request key and response value in cache to reduce calling the service for same type of requests

Hi
I have a web service which return the response based on the request key.
I need to save the key and the response value in cache for around 30mins
to reduce the web service calls for better performance.
Appreciate if any once can share a sample code

using System.Runtime.Caching;
public List<string> cachingwebserviceresponse()
{//Create a cache key
string strParameters = "1234";//Create a cache value holding object
List<string> results = new List<string>();//Create a cache
ObjectCache cache = MemoryCache.Default;//Assign key for the cache
string cacheKey = strParameters;//Check whether the key exists in the cache//If exists assign the values from the cache instead of calling the webservice//else call the web service and add the response to the cache
if (cache.Contains(cacheKey))
results = cache.Get(cacheKey);
else
{ //calling the web service client
using (service.webservice fd = new service.webserviceContractClient())
{ //Call the web service function to get the results
results = fd.DataSearch(strParameters);
} //Create the cache expiration policy. I have created for 30 minutes.
CacheItemPolicy cacheItemPolicy = new CacheItemPolicy();
cacheItemPolicy.AbsoluteExpiration = DateTime.Now.AddMinutes(30); //Add the response to the cache based on the key
cache.Add(cacheKey, results, cacheItemPolicy);
return results;

Multiple web service calls - Split message,1 WS call for each message

Friends,
We have designed a BPM which will pick the files, make web service call and merge these message structures and map them to the target.
We have to modify this design as follows,
We have to split the message based on purchase order number, meaning one message for each order number and then we need to make a web service call for each of them,after we get all the responses we will merge the files using transformation. (merging files and transformation is already taken care, its the web service part which iam looking for)
Thanks in advance for all your help/ideas.

Friends,
Can you please help me out with this logic? Thanks!

How to create a service call for more then one item

Hi All,
How to create a service call for more then one item. i.e. the service call should be logged for more then one item

As you noticed this is not possible by design.
Maybe you could have a dummy item for that purpose and register the real items to be handled in a UDT...
HTH

Call path monitoring for services invoked by TMQFORWARD

Hi,
I'm failing to make TSAM monitor call-paths for services invoked by TMQFORWARD.
If the service(A) invoked by TMQFORWARD calls another service(B), the call path monitoring works, but the service(A) seems to be listed as the initiator (No indication of TMQFORWARD in the call path).
If the service invoked by TMQFORWARD does not call other services at all, the invocation seems to be completely ignored and not listed in the Call Path Result List.
I don't see TMQFORWARD in the call path initiator options list either.
So is this setup not supported by TSAM yet?

Yes, currently TMQFORWARD cannot be the initiator of call path.
Regards,
Yu Wang

KB05133 - Email reconciliation features for BlackBerry Internet Service

There are lots of questions about what reconciliation features / functionality options there are with BIS ... well, from the horse's mouth, here we go:
KB05133 - Email reconciliation features for BlackBerry Internet Service
I tried to copy / paste the table but I'm not nearly savvy enough to successfully do it; so, click away!
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

Hi
drastikbb wrote:
In the second set of instructions, going directly to the BIS web page, I cant get past the login page, I have tried to register, I have tried to login, I have asked service provider for passwords and I get one dead end after another, I cannot login nor create an account to login to the BIS web site.
Any help would be appreciated, after 10 years as a loyal Nokia user I am now hoping that the decision to move to BB was not one I will live to regret.
Regards
DS
When you go the BIS account on the PC, is this the place you were told to go by your service provider? My own has my carriers' logo on the page and they provided me with the login details whilst I was on the phone to them. It is THEIR responsibility to set up your BIS and to assist you.
Whether you try OTA or on the PC, you must have access to your BIS and when you finally get it, setting up the email couldn't be easier.
I cannot see why upgrading to OS 6 would affect email set-up but as you suggest, the option to put email server details in may have been removed. They are not necessary with BIS.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Internet order for service questions

I placed a order to become a customer yesterday via internet. I recieved a email rite away giving me a order number but since then when I check order status it says it is still processing. While I was placing the order it said over nite shipping and had everything saying est delivery date 10/21. basically I have 2 questions!!!
1- because I recieved a order # via email and stuff does that mean I was approved for service?
2- why is it taking so long to process the order. I check online and it says your order is processing.but since I have to be home to sign for the package I am trying to know what day it is supposed to arrive.

Ordering over the web is not as quick as going into the store and getting service.
They have to physically get your device out of stock, process your phone number, package it and then send it out. You are not the only customer. It takes time.
You also must agree to the terms of service either via phone, email or text and there may be a credit check or hold.
But Verizon will tell you.
Just wait and be patient.
Good Luck

Called for Service -Internet

Similar Messages

Maybe you are looking for