"cpu fan not functionin​g. check fan connection​s and call for service."

wondered if a different failure than than "CPU fan has failed ... system will shutdown in a few seconds". I have a DX-2000 P4 desktop running XP SP3 which I just changed motherboard and CPU fan on. All fans are spinning at close to same speed. (P/S,Chassis and CPU). Not extremely fast but cant see vanes. Computer has sat for several years. Wondered what the actual test is and how fan speed is regulated. I guess temperature sensors are built into the cpu, somehow there must be a varying voltage applied to fans to change their speed and/or a measuring device to see what their rpm is. This must be controlled by the BIOS as the whole pass/fail test is. My next step is to put back the old fan and see what happens. I have a new p/s to install should be here today. Actually used but cleaned and tested. Saving a cleaning chore. Not sure if my older supply might be causing the issue with low volts.
This question was solved.
View Solution.

If the fan is slower than the factory fan you will have that problem.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

  • Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

    I have a web page that contains a ReportViewer control.  I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control.  I have set the ReportPath and ReportServerUrl correctly.  I am
    getting an error message.
    Am I suppose to use an .rdlc file rather than a .rdl file?  Does the web server configuration need to use a certain account?
     I am getting the following error message:
    The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
    The request failed with HTTP status 404: Not Found.

    Hi bucaroov,
    The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
    Please follow these steps to solve the issue:
    Logon the Report Server machine.
    Open the Reporting Services Configuration Manager.
    Copy the Report Server URL from 'Web Services URL'.
    Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
    not available, could you please post the error message.
    Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
    For more information, please see:
    Walkthrough: Using the ReportViewer Control in Remote Mode:
    http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • Facetime says "could not sign in check network connection and try again ?

    when trying to sign in to facetime i get the resonse "could not sign in check network connection and try again" network is fine so is the apple id and password

    I'm having the same problem. I have restarted and continue to receive this error message! Any advice is appreciated!

  • When deploy: Wizard error a connection to the deployment share could not be made "check physical connection"

    Hello everybody,
    yet another issue with deploying a masterdisk. I will give you a short explanation of the situation.
    I need to deploy Windows 8.1 PRO x86. 
    Using: Microsoft Deployment Workbench Microsoft Version: 6.2.5019.0
    1. Reference PC: Windows 8.1 PRO x86 is installed on ORACLE Virtual Box.
    2.  I installed  MDT on my workstation Windows 7 x64, where "C:\DeploymentShare\Windows8" is located.
    3. To change the Unattended.xml file, I have second ORACLE Virtual Box with
    Windows 8.1 PRO x86 with MDT, which connected to the DeploymentShare of Windows 7 x64.
     - The reason is because the Reference PC is x86 and the Unattended.xml file can be changed only if MDT is installed on x86 Windows, otherwise it is not possible.
    The image capture is successful.
    Then I create bootable USB device using rufus-1.4.12.exe. I use: C:\DeploymentShare\Windows8\Boot\LiteTouchPE_x86.iso
    I use a real PC (not virtual machine) and when the deployment starts
    I see: 
    1 Welcome screen, where I select: Run the deployment wizard to  install a new operating system.
    2. The next screen is an error screen where I see the error: 
    "Wizard error
    A connection to the deployment share (\\ComputerName\C\DeployemntShare )could not be made
    DHCP Lease was not obtained for any Networking devices!
    Possible cause: Check physical connection
    I am relatively new with MDT.
    Any suggestions are more than welcome.

    Nick,
    Thank you for the answer!
    Yesterday, I figured out that I need to create an offline bootable disk. 
    The issue is caused, because creating a bootable disk with rufus.exe include only the ISO file and not the WIM file. That is the reason why during OS installation process it asks me for the shared folder...

  • "itunes update server could not be contacted, check internet connection or try again later"  I've been trying for several days now :p  Help

    I keep getting this, "can not contact itunes server, check internet connection." every time I try to update itunes. Well, the connection is good.  

    A simple search of the forums would have revealed many similar threads with the same error and appropriate troubleshooting and resolution.
    See the "More Like This" section over there =================>

  • Not able to start the Connection Digital Networking Replication Agent Service

    Hi All,
         I am getting the following alert through RTMT, when i tried to start the service in Unity Connection Serviceability, it doesn't start.   Unity Connection 8.5.1.  It is still in the stopped status, Although service is not important, however it is pushing a lot of rtmt alert.   Could you please help me how to start this Connection Digital Networking Replication Agent Service. 
    Service operational status is DOWN. Connection Digital Networking Replication Agent.
    Thanks
    Barry

    Thanks for Nadeem and Aokanlawon, for the quick reply.
    1.  You are right  i got only one cluster i understand its not working,  However howcome this service was started in pub UC and was working. I will disable anyway now as i got only one cluster. It all started when I started to fix the following alerts which was pushed by sub Unity Connections(Branchsite)
    Failed to retrieve DbSpace usage information when running the "Monitor the Unity Connection databases" SysAgent task.
    This alert started coming after there was a network connection drop between HQ cucm and the branch sub UC, after the drop, all ports disconnected between these two servers, services deactivated in Sub UC, after the network connection back again, ports connected back and the most of the services activated.  However the following services were not in the running state in Sub UC.   I found these information from the sysagent trace log.  I thought to fix this error  is to start the Connection Database Proxy in Sub UC.  However this has stopped the following service 'Connection' Database Proxy' and 'Connection Digital Network Replication Agent' in Pub UC.  I managed to start Connection Database Proxy in Pub UC, however Connection Digital Network Replication agent is now in deactivated status.
    Critical Services
    connection exchange notification web service
    connection mailbox sync
    connection message transfer agent
    connection notifier
    Optional services
    Connection Database Proxy
    Connection Digital Networking Replication Agent
    Connection Speechview processor
    2. How do I stop the alert from sub UC
    Failed to retrieve DbSpace usage information when running the "Monitor the Unity Connection databases" SysAgent task.
    Thanks

  • When I try to use FT on my MBP, connected to a 24" display, and close the shell, the display camera says it is not turned on. I have looked and looked for a solution. Can someone help? Thanks

    When I try to use FT on my MBP, connected to a 24" display, and close the shell, the display camera says it is not turned on. With the MBP open, FT works fine. I have looked and looked for a solution. Can someone help? Thanks

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

  • ITunes 8 not running?  Check your Task Manager and it probably is!!!

    Click CtrlAltDelete and check to see if iTunes8 is running. Whats that all about?

    Got the same problem. When I click the itunes icon,the hour glass shows for about 20sec, then does off and nothing. I have checked the task manager and it does not show its running. When I come to log off the computer, I get the little window to wait or end the itunes application. I have uninstalled and reinstalled a zillon times and it still will not run. Can anyone help please?

  • How to store Connection object and call it from other programs.

    Hi,
    I am trying to connect to the database, store the connection object and use this connection object from other standalone java programs.
    Can any one tell me how to do this? I've tried in the following way:
    In the following program I am connecting to the database and saving the connection object in a variable.
    public class GetKT2Connection {
       public static void main(String[] args) {
          String url = "jdbc:odbc:SQLDsn;
          String dbUser = "sa";
          String dbPwd = "sa";
          Connection kt2conn = Connection connection = java.sql.DriverManager.getConnection(url, dbUser, dbPwd);
          if(kt2conn == null) {
             System.out.println("Database Connection Failure!");
          else {
             System.out.println("Connected to Database...");
         GetKTConnectionObj.storeKT2ConnectionObj(kt2conn);
    } Here is the program to save connection object in a variable.
    public class GetKTConnectionObj {
       static Connection kt2Connection = null;
       public static void storeKT2ConnectionObj(Connection conn) {
       kt2Connection = conn;
       public static Connection getKT2ConnectionObj() {
       try {
          return kt2Connection;
       catch(Exception e){
          System.out.println(e);
      return null;
    }Now from the following code I am trying to get the connection object that is stored. But this is throwing NullPointerException.
    public class Metrics_Migration {
      public static void main(String args[]) {
         try {
        java.sql.Connection connection_1 =   GetKTConnectionObj.getKT6ConnectionObj();
         catch(Exception e){
    }

    kt2Connection is null. You need to store it first, to make it not null. Otherwise it will stay null forever. And why on earth are you trying to do this THIS way?
    If you are running the two applications separately, it wont work either.

  • The best way to connect wireless and wired for a WRT160N.

    It took me about 4 hours to find out how to connect wireless and wired to a network using model WRT160N.  Here is what I have done.  First install the CD when it says there is not connection connect your PC, Modem and router Andy any wireless are wired products, after that do what the linksys advisor tells your which is default.  When it gives you the security key write it down because you will need it for your wireless and wired Products.  Under security mode  type your SDD name and where key 1 is type your security password with was given to you.   Remember all you wireless products have to have the same SDD Like Linsys and all your wired products have to have a different name like Linsys2 but your Key 1 numbers has to stay the same.  That is all you have to do.  Remember that wireless and wired has to be in sequence.  That should do it.

    Hi David Hamilton1;
    I guess that all depends on how critical your data is in relation to how much time you want to spend doing the erasure. Those higher level erasure options can take a significant amount of time to complete. Personally I don't have anything on my Mac that I think is worth more time then a simple erasure even if that does leave it some what recoverable. To me it seems some people are going overboard on this issue.
    Allan

  • Was not informed of new policy when signing up for service and charged for services I did not knowingly agree to.

    I’m writing to contest a $29.99 monthly charge, which is contracted for 24 months amounting to $720 in total. The charge is for a data plan which I did not knowingly agree to, and verizon is unwilling to remove from the account even though the phone on the line does NOT use data.
    The backstory of the issue:
    On September 19, 2014 I waited in line at an Apple store to purchase a new iPhone on launch day.  I opened a new basic line of service for $9.99 a month on my account so I could purchase a discounted phone from Verizon. When purchasing the phone, the representative explained that he was going to have to put a basic data package on the line for $15 a month, but that it would be removed once I transferred the phone to an existing line on the account.  After the purchase was complete, we transferred the phone to an exisitng line, and the represented confirmed that the data package would not be charged to my account and therefore I would only have to pay $9.99 a month for the basic line of service for two years. A couple weeks pass and I receive my bill, I notice that the data plan is still listed on my account and has also increased to $29.99 a month!  I call Verizon to see what is going on, they tell me that they have just implemented a new policy that states if I purchased a smart phone on a basic account and then transfer the phone to a differnt line that I will have to pay $29.99 a month for data even if the new phone that is currently on the line does not use data! I told them I was not informed of this, and was actually told the complete opposite when signing up for service.  They refuse to remove the data package, and will not let me cancel the account without charging  me $350.  The representative on the phone said that the representative in the store was a sales person and most likely did not have the training to inform them of the new policy change, and that they could not honor what he told me.
    I should be able to rely on and trust what a Verizon wireless representative is telling me, I was not aware of the new policy and did not knowingly agree to this policy. And in that case, I would like to point out that I have been a loyal Verizon customer for over 15 years humbly request that you clear this $29.99 monthly charge from my account as a gesture of good faith.
    I have spent over 7 hours on the phone with verizon trying to get this resolved to no avail. I have also filed a complaint with the attorney generals office, and plan to persue this until it is fully resolved.

    Customer Agreement | Verizon Wireless
    This agreement and the documents it incorporates form the entire agreement between us. You can't rely on any other documents, or on what's said by any Sales or Customer Service Representatives, and you have no other rights regarding Service or this agreement.
    They gotcha! And that policy change was listed here and other places on the net.
    Its either pay that or the early termination fees.
    Verizon will not grant you a mistake forgiveness clause.
    If they do it for you they would have to do it for everyone.
    Good Luck

  • HT5625 My iCloud account says it's not verified to check my email. And when I check my email it says it's been verified

    My iCloud doesn't verify

    Thank you for your reply but I sorted it out by turning my phone off and then on again and it seemed to update itself so I could put in the apple ID.  However, it's really not easy to negate the iphone and change emails which is unavoidable sometimes.  If anything like that happens again I now know that there is an icloud website at least.  Anne

  • Can not specify the SMTP server port, username and password for my SharePoint 2013 web application

    We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
    So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
    Thanks

    i am no sure about user name and password. i never saw that option.
    check this guide:
    http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
    http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
    thanks for the reply, but in our case the SMTP is  a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
    provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please?

  • Podcast, check RSS, image link, and waiting for Apple.

    Hey all, so i submitted a podcast back in September 2011. Just a fun little show that we do about pop culture, movies, and etc. But that is irrelevant...
    OK so could someone check my rss feed, it looks to work fine using the Advanced menu in iTunes and I can subscribe to it, but want a professional(er) opinion.
    Also my icon is not showing up in iTunes or the RSS feed, never has. The dimensions are 300x300 at 72. I have seen recently talk of using 1400x1400. Should i update the image? Edit: ok so i updated the image to the 1400, still no luck in rss or itunes link.
    Finally, my main problem is that I have had no response or acknowledgement from apple. I have tried submitting multiple times, just resubmitted today so /crossfingers
    thanks all for your support, love the communities!
    ps, just noticed that some of the episode descriptions are not showing up either in iTunes.
    Thanks all!

    The second line of your feed reads:
    <rss xmlns:itunes="http://www.zombiefreeradio.com/rss.xml" version="2.0">
    It should read
    <rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
    As it stands, iTunes cannot read any of the 'itunes:...' tags, which is why the image, which is correctly referenced, is not being seen by the Store, and why the 'itunes:subtitle' and 'itunes:summary' tags are not showing up.
    Your enclosure tags look like this:
    <enclosure url="http://www.zombiefreeradio.com/ZFRPodcast-0_Pilot.mp3" length="64,837,574" type="FOR AN MP3 FILE - audio/mpeg" />
    The 'length' attribute should be the file size in bytes with no commas.
    The 'type' attribute should read "audio/mpeg".

  • If I buy an iphone second hand, how can I check that is valid and purchased for real?, If I buy an iphone second hand, how can I check that is valid and purchased for real?

    Hello
    I'd like to buy an iphone second hand and although I trust the source I'd like to be able to check with certainty that the phone was bought instore.
    I was thinking to ask for the receipt and check the serial number. is the serial number written on the back of the phone and the recipt(if the phone is sealed)?
    Similarly, if I buy an ipad 3 or 4 second hand, how do you check this again?
    Please let me know with some details about this.
    Thanks
    Anthony

    Ask the person you are buying the phone from to provide the original proof of purchase for the phone. If you do not know the seller personally I would be very cautious about purchasing the phone. There are many many stolen, hacked and jailbroken phones out there and these will only cause you grief down the road.

Maybe you are looking for