Calling BIP from Forms: Having Java version problem

<h5> Hi,
I tried to call a BIP report through Oracle Forms.
I followed this PDF.
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v22.pdf
Problem is, when I run the form, I get this error (copied from the Java Console) </h5>
<h6>
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\channasiriwardena
Proxy Configuration: Manual Configuration
Proxy: 192.168.11.100:81
Proxy Overrides: *.iil.informatics.lk,192.168.11.*,192.168.10.*,<local>
JAR cache enabled
Location: C:\Documents and Settings\channasiriwardena\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0 Forms Applet version is : 10.1.2.0
java.lang.UnsupportedClassVersionError: oracle/j2ee/ws/client/ServiceFactoryImpl (Unsupported major.minor version 49.0)
</h6>
<h5>
I am using Forms Forms [32 Bit] Version 10.1.2.0.2.
JDeveloper Version is 10.1.3.5.0.
The Forms 10g Java version is 1.4.
So according to what I discovered on the net, the problem is: My JInitiator is 1.3 using JRE 1.3, BUT my .JAR file is Java 1.5.
Since we are using the Oracle JVM, ticking “Use JRE 1.5..” in the Advanced tab of the Internet Explorer Options has no effect.
We cannot upgrade the Oracle JInitiator to a 1.5 since there is no such JInitiator version. JInitiator is available only up to 1.3.1.30.
What can I do. What if I install Java 1.3 in my machine and re-compile my JAR file with that? Will that work or is there another solution?
Has anybody encountered this problem?
Any help would be greatly appreciated.
Thanks & Regards,
C.S.
</h5>

Hi
You dont need JInitiator, just downloading and installing either JRE or JDK 1.5 will be enough.
Another option might be to set the version you want to compile your classes against in JDeveloper. there is a setting in there to specify the java version you want to compile against.
So are you using the web services from BIP inside Forms?
Tim

Similar Messages

Calling BIP from Oracle Forms: Having Java version problem.

<h3>
Hi,
I tried to call a BIP report through Oracle Forms.
I followed this PDF.
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v22.pdf
Problem is, when I run the form, I get this error (copied from the Java Console)
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\channasiriwardena
Proxy Configuration: Manual Configuration
Proxy: 192.168.11.100:81
Proxy Overrides: *.iil.informatics.lk,192.168.11.*,192.168.10.*,<local>
JAR cache enabled
Location: C:\Documents and Settings\channasiriwardena\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0 Forms Applet version is : 10.1.2.0
java.lang.UnsupportedClassVersionError: oracle/j2ee/ws/client/ServiceFactoryImpl (Unsupported major.minor version 49.0)
I am using Forms Forms [32 Bit] Version 10.1.2.0.2.
JDeveloper Version is 10.1.3.5.0.
The Forms 10g Java version is 1.4.
So according to what I discovered on the net, the problem is: My JInitiator is 1.3 using JRE 1.3, BUT my .JAR file is Java 1.5.
Since we are using the Oracle JVM, ticking “Use JRE 1.5..” in the Advanced tab of the Internet Explorer Options has no effect.
We cannot upgrade the Oracle JInitiator to a 1.5 since there is no such JInitiator version. JInitiator is available only up to 1.3.1.30.
What can I do. What if I install Java 1.3 in my machine and re-compile my JAR file with that? Will that work or is there another solution?
Has anybody encountered this problem?
Any help would be greatly appreciated.
Thanks & Regards,
C.S.
</h3>

Hi,
Yes, you need to compile your source files with JDK 1.3 (since JInit 1.3.x.x uses JDK 1.3).
Other solution would be to use JRE 1.5 (instead of JInitiator).
Check out [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=550563] on how to use JRE1.5
-Arun

Calling Report from Form Error ORA-06508

Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
     list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
Thanks

Hi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id                Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status      VARCHAR2(100);
repsvr                          varchar2(21) := 'myserv';
userid                         VARCHAR2(100);
pass                          VARCHAR2(100);
Host                    VARCHAR2(100);
BEGIN
userid          := Get_Application_Property(USERNAME) ;
pass          := Get_Application_Property(PASSWORD) ;
Host          := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF&paramform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S

Calling report from form. Need PDF output

I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
win_api_environment.read_registry must be declared. Is there some package I need to attach?
Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
Thanks
The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
IS
vcServerApp varchar2(40);
vcServerTag varchar2(600);
vcCommand varchar2(2000);
iArgPos pls_integer;
dummy NUMBER;
BEGIN
-- 1 get the Server App for .PDF files
vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
-- 2 get the executable
vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
vcServerApp||'\SHELL\OPEN\COMMAND';
vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
-- 3 Sort out how to specify the Filename
iArgPos:= instr(vcCommand,'%1');
if iArgPos = 0 then --no substitution Var on the command line
vcCommand := vcCommand||' '||vFile;
else
vcCommand := substr(vcCommand,1,(iArgPos-1))||
vFile||substr(vcCommand,(iArgPos+2));
end if;
-- 4 Run using Winexec (or Host if preferred).
win_api_shell.winexec(vcCommand);
EXCEPTION
when no_data_found then
abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
END;
Chad
I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Calling Report From Form To Many Destinations

Hi
I am calling reports from forms using SET_REPORT_OBJECT_PROPERTY and then run_report_object.
I dont know the destination until runtime of the report which is ok as I can pass this in via my procedure, but if that destination is many ie mail and file what is the best way to distribute the report?
I could call my procedure for each destination but that seems a bit unefficient since the report would be created many times, is there another way?

what about adding a drop-down-list near your report-button where you can choose the destination?
when you click the report-button you simply read the value selected in the drop-down-list and send it to your reports-server too.

REP 110 & REP 0110 .calling reports from Form 10g(10.1.2.0.2)

Hi All,
We are migrating form from Oracle form 6i to Oracle 10g(10.1.2.0.2). I am calling reports from forms
using Web.Show_Docment(). When we run reports in report builder 10g it works fine.
But when we try to run reports from Forms 10g it throws error which is given below.
We want to run reports from UNIX. After using this url to submit report we get error REP 110 and REP 0110
URL
http://GEM:7777/reports/rwservlet?server=rep_server&report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
ERROR
REP-110: File '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2' not found.
REP-0110: Unable to open file '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2'.
I will really appreciate your help.
Thanks
Sandy

Hello,
You are mixing 2 separators in the URL : & and +
Use only one separator in the URL :
Example :
http://GEM:7777/reports/rwservlet?server=rep_server+report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
Regards

Calling JSP from Forms and going back from JSP to Forms

Hi,
We are calling JSP from Forms 6i using show_document
I'd like to go back to tha calling Form from the JSP.
How can I construct the URL that would lead me back to the same Form and Forms session where the JSP was called from?
Thanks,
Arpad

Thanks Shay,
works for me too...
Now:
when I use the "Back" button of my IE to go back from JSP to the Forms session, it works for Jinitiator 1.1.8.19, but if I use Jinitiator 1.3 I got hung...
Any ideas how could I make it work from Jinit 1.3?
Thanks again/
Regards,
Arpad

Report Called from FORMS having Printing Problem

Hi all
Guys i have a report problem in reports 6i.
I am calling a report from my FORM 6i directly to printer (a dot matrix printer).
I have set
Add_Parameter(pl_id,'DesType',TEXT_PARAMETER,'printer');
The report is actually a confirmation report and i have given its layout height equal to 3.7 . But when i send it to printer it ejects the paper equal to 11 (equal to height of a portarait report).
How can manage this ejection from Form or Report Side.
NOTE : This problem occurs even if print the report from report preview(means not printed directlty from FORM).
Kindly help me with this if any.
I need it urgent.
Thanx.

Hello All
The furthur detail to my previous problem is given as follows:
I am getting problem
with the Oracle reports. I have a dot matrix printer (Epson LQ-300, which is a
tractor feed printer). While printing a report which is always not more than half a
page, the printer does not stop after printing the report(the half page). It stops at
the end of the page. I mean that half the page is printed and the rest half is blank.
I want that the printer should print only at half a page. On the blank half it should
print another copy of same report.
Regards,
Qaiser Qayyum Malik.

I can't make FaceTime (Version 1.1.1 (309)) calls out from my Macbook Pro (Version 10.7.5). Anybody experiencing the same problems or any solutions??

I've been trying to make calls to other FaceTime users (on iPhones and Macs) via my Macbook Pro.
On my side FaceTime continues ringing. However, on the other side, when the person has picked up the call, FaceTime would show 'connecting' for around a minute or so and then 'connection lost'. Meanwhile, FaceTime would still continue ringing and would only show 'unable to facetime' after 2 minutes or more.
My FaceTime version is Version 1.1.1 (309).
Macbook Pro 10.7.5
Wondering if anyone has the same issues.
Or does anyone have the solutions??

Yes. I'm having the same problem with the same FaceTime version and Macbook Pro OS10.7.5 as well as the iPod Touch 4th generation.
Another thing is that since updating the OS, Skype on Facebook does not receive the image without freezing or having blinking horizontal lines running through it.

Problem with IN OUT parameters whiloe calling procedure from Form 6i

Hi
Could some help please? I have the following scenario.
I am calling a stored procedure from form 6i by pressing a button on the form. Procedure has two IN OUT parameters, and I am passing these two IN OUT parameters and have declared them the way they are declared passed to the procedure. But I get an error when calling that procedure with these IN OUT parameters. the procedure works fine if parameters are IN only. The error says:
PLS:00363: Expression '1' cannot be used as an assigment target.
NO matter I pass some value or leave it blank, I get the same error message persistenetly.
Please help.
Thanks

make sure you are calling your procedure with variables as parameters,
i.e.
      l_v1 := 1 ;
      l_v2 := 'hello world' ;
      your_proc(l_v1, l_v2)
not
      your_proc(1,'hello world')

Calling OWB from forms

hi,
i need help regarding calling OWB from Oracle Forms. i have a transformation routine written in java, which i'd be calling through forms and then switch to OWB. is there a way i can do that?
Regards,
Mehwish

Is your question how to call out to Java from Forms? You didn't say which version you are using, but from Forms 6i and up you can use the the Java Importer. This let's you create a PL/SQL wrapper around your Java so that you can refer to it from within Forms. At runtime, Forms will call out to Java for you.
Regards,
Robin.

Call procedure from form which displays HTML

I have a form based on a table with three columns. When I press the insert button, I want to insert the data into the table and then pass the data to a procedure (wihtin a package), which will call an external java procedure and get a passcode returned to it. I then need to display the passcode to the user's screen (which I am currently attempting to do via htp/htf calls within a procedure in the package).
I tried to put the call to the package in a trigger. It succeeded in calling the external procedure, but did not display anything to the browser afterwords.
I then tried to put the call to the PL/SQL code on my Insert button. I have tried various flavors of this call, but here is the current version:
declare
v_user_key_id lcams_db.user_token_link.user_key_id%TYPE;
v_tkn_ser_no lcams_db.user_token_link.tkn_ser_no%TYPE;
v_actv_ind lcams_db.user_token_link.utl_actv_ind%TYPE;
blk varchar2(10):='DEFAULT';
begin
v_user_key_id:=p_session.get_value_as_number(
p_block_name=>blk, p_attribute_name=>'A_USER_KEY_ID');
v_tkn_ser_no:=p_session.get_value_as_varchar2(
p_block_name=>blk, p_attribute_name=>'A_TKN_SER_NO');
v_actv_ind:=p_session.get_value_as_varchar2(
p_block_name=>blk, p_attribute_name=>'A_UTL_ACTV_IND');
lcams_db.otp.set_otp_user_key_id(v_user_key_id);
lcams_db.otp.set_otp_tkn_ser_no(v_tkn_ser_no);
lcams_db.otp.set_otp_actv_ind(v_actv_ind);
doInsert;--- This is the default handler
lcams_db.otp.otp_utl('INSERTING');
end;
otp is the package. I have three variables in my package otp_user_key_id, otp_tkn_ser_no, and otp_actv_ind which I pull from session storage and put into the package variables. the otp_utl sets a variable and calls otp_add_user, which gets more data from the table and calls the pl/sql wrapper for the java routine to actually add the user into the external OTP database. The java routine returns the status and initial passcode and then I call a routine internal to the package to display the results to the user via htp and htf calls.
The best result was getting the table to update and the external database to update, but I never got the resulting html to diplay. With the current code, the browser goes away with a message of Connecting to... and nothing gets updated and my browser eventually comes back with a 'No data...' message.
Is there a way to do what I want? Ideally I would like to call the package, display the results, and provide a back link so the user can get back to the original form after the user has read the passcode message.
null

Okay. I put the following code in the 'On successful submission of the form...'
section of the form and I tinkered with it until it works; however, it currently assumes
the Insert button was the button clicked.
declare
v_user_key_id lcams_db.user_token_link.user_key_id%TYPE;
v_tkn_ser_no lcams_db.user_token_link.tkn_ser_no%TYPE;
v_actv_ind lcams_db.user_token_link.utl_actv_ind%TYPE;
blk varchar2(10):='DEFAULT';
my_url VARCHAR2(200);
return_url VARCHAR2(200);
begin
v_user_key_id:=p_session.get_value_as_number(
p_block_name=>blk, p_attribute_name=>'A_USER_KEY_ID');
v_tkn_ser_no:=p_session.get_value_as_varchar2(
p_block_name=>blk, p_attribute_name=>'A_TKN_SER_NO');
v_actv_ind:=p_session.get_value_as_varchar2(
p_block_name=>blk, p_attribute_name=>'A_UTL_ACTV_IND');
my_url := 'lcams_db.otp.otp_utl?' | |
'p_user_key_id=' | | TO_CHAR(v_user_key_id) | |
'&p_tkn_ser_no=' | | v_tkn_ser_no | |
'&p_actv_ind=' | | v_actv_ind;
call(my_url,return_url);
end;
How do I determine which button was clicked for the 'On successful submission...' section so I can call the correct routine?
null

Is posible call WebServices from Forms???

Hi.
My cuestion is simple. I don´t found information about this.
Can I call webservices from a Forms???. If it´s possible how it is??.
I don´t find anything document.
Thanks and sorry for my english.

Hi!. thnaks for response.
The version is Forms 11g.
FormsEleven thaks!! !!
The webService are in .Net C# in a IIS. There is some problem???.
Edited by: Adama on 30-ago-2010 14:33

Calling report from form with lexical parameter

hi
DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(1000);
     rep_status VARCHAR2(20);
BEGIN
          repid := FIND_REPORT_OBJECT( 'REPORT34' );
          set_report_object_property(repid,report_other,'p_SEASON_YEAR='||:SALE_ORDER.SEASON_YEAR
          ||' &sort='||:sale_order.sort1);
          --set_report_object_property(repid,report_other,'p_g_id =20');
          v_rep := RUN_REPORT_OBJECT(repid);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
--Display report in the browser
WEB.SHOW_DOCUMENT('http://127.0.0.1:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
PAUSE;
END;i had made a lexical parameter in reports the reports code is
SELECT s.season_year,sd.prod_id,P.PROD_NAME,sum(sd.total_qty)
FROM sale_order s,sale_order_detail sd,PRODUCT P,CUSTOMER_MASTER cm,CUSTOMER_DETAIL cd
where s.id=sd.id and P.PROD_ID=SD.PROD_ID AND s.season_year = :p_season_year
AND CD.CUST_ID=CM.CUST_ID AND CD.CUST_ID=S.CUST_ID AND CD.COUNTRY NOT LIKE 'SPA%' AND Sd.PROD_ID LIKE 'CA%'
group by s.season_year,sd.prod_id,P.PROD_NAME
&sortthanks and regards
vikas

Vikas,
So, is your code producing an error when your report is called? Also, it would be helpful to know your Forms and Reports versions. Is ":p_season_year" set up as a USER_PARAMETER (UP) in your report or is it a true lexical parameter (meaning you should reference it with '&' instead of ':')? If it is a UP, the typical way to pass a value to this UP from Forms is to use a ParamList object instead of the REPORT_OTHER parameter of the Set_Report_Object_Property built-in. For example:
DECLARE
   pl_id    ParamList;
   pl_name VARCHAR2(10) := 'REPORT34';
   v_rep VARCHAR2(1000);
   rep_status VARCHAR2(20);
BEGIN
   pl_id := Get_Parameter_List(pl_name);
   IF id_null(pl_id) THEN
      pl_id := Create_Parameter_List(pl_name);
   END IF;
   Add_Parameter(pl_id, 'P_SEASON_YEAR', TEXT_PARAMETER, :SALE_ORDER.SEASON_YEAR);
   repid := FIND_REPORT_OBJECT( 'REPORT34' );
   v_rep := RUN_REPORT_OBJECT(repid, pl_id);
   ... rest of your code here ...
END;Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Calling report from form in Web environment

Hi,
We are in the process of migrating our C/S appication (developed in Developer2k) to intranet using OAS. My question :
a) Is there any other way to call report from a form other than web.show_document?
b) When a report is called from the report server(using web.show_document), a log-in screen comes up unless the login and password is passed as parameter. Only problem with this is the password shows in the URL. Is there any other way to make the call so that the login & password does not show and the user won't have to login a second time to run the report?
Any reply would be appreciated..Thanks

1. Yes you can use run_product package procedure to call reports on web, Oracle documentation says that run_product command will run in web env.
2. Yes you can hide username & password from user, it depends on which method you are using to call reports, if you are using web cgi then add username & password in file "cgicmd.dat" and "oascmd.dat" for web catridge or in cartridge parameter setting you will find this files in directory "\orant\report60\server\".
Darshan Desai
[email protected]
null

Calling BIP from Forms: Having Java version problem

Similar Messages

Maybe you are looking for