Calling Standard screen from custom program

Hi all,
My requirement is
1)Either to fix a link(say from a button) on my custom screen for material creation,to call mm01 basic data screen for image upload.
2) Or to upload material image directly to the corresponding table(using any fm or something).
,please show me light on the above issue.
Thanks in advance
Sri

Hi Jovito,
I also think the same that it's not possible. Now my issue is how to get my requirement.
FYI..
To open Classification screen directly we have a function module CLFM_OBJECT_CLASSIFICATION. But if I want to open IA06
Inspection characterstics screen we don't have any FM or API to do the same.
So how will I get my requirement done. That why I use the BDC call transaction to open IA06 Insp. characterstics screen but here I am facing this Back issue.
Please advice if there is any suggestion.

Similar Messages

How to call standard form from your custom forms

Hi,
I submits concurrent program(SRS) from custom form and then i would like to call view requests standard form rather navigating manually?
Please can anyone tell me how to do above?
Thanks
ESL

Hi Esl ;
Please check [this search|http://forums.oracle.com/forums/search.jspa?forumID=475&threadID=&q=call+standard+form+from+custom+forms&objID=c84&dateRange=all&userID=&numResults=15&rankBy=10001]
Please also check those and see helpful:
Forms Customization
Re: Enable Submit Button at User Level and Disable at Block Level
Forms Personalization Document
Re: Forms Personalization Document
Regard
Helios

How to pass a value to a standard screen from program

My requirement is to pass a value from the program to a standard screen.
I m using transaction CU01. i have to get the dependency name from the program and displayed in CU01 first screen, after tht i have to create a dependency.
Set parameter Id is not working for this screen so can any one help me to pass the value to standard screen from program.
its urgent
Thanks in advance.

hi,
consider filling up t_bdcdata for the single field and passing it as
call transaction 'CU01' using itab. as in BDC
santhosh

Call multiple screens from LSMw

Hi
i want to call multiple screens from lsmw
I need to call a three transaction from LSMW wich are subzequent steps for data entry.
1) first tcode to be called is eprodcust which creates some master data and using this master data and some fields of data creatd i need to call two more tcodes first iq01 to create meter and save then eg31 tcod to feed data.
Please suggest where in lsmw can i give options for suc hscnerio and call of subsequent screens.
regards
Edited by: Prieti_V on Nov 8, 2011 8:28 PM

Hi Priti ,
we have few options to handle such cases , to avoid Locked Problems what you can do is
-->write BDC program within LSMW to create installation ( this will be created within step of 11 Convert Data ).
-->Based on the above BDC results ,run another BDC within LSMW to create Device.( this will be created within step of 11 Convert Data ).
-->third BDC records , let SAP do it thru LSMW or can you do it convert data step itself.
this approch needs lots of codes , so in worst case and if you dont want to break the loadings the follow this.
*Better to find any BAPI which will do creation of installation ,devices
regards
Prabhu

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Call a screen in another program

Hi
I have a program PRG1 that has screen 1000.
I want to load this screen from the program PRG2.
thanks
Murugesh

yes , do now like below. it will surely work. it worked for me.
DATA: bdcdata_wa TYPE bdcdata,
bdcdata_tab TYPE TABLE OF bdcdata.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'PRG1'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CALL TRANSACTION <TCODE> USING BDCDATA_TAB.

Can we call normal screen from subscreen

hi,
can any body tell how to call normal screen from subscreen in Dialog Programming
thanks in Advance,
Subodh.

Hi,
use stmt like":
call screen '1001'.
But this will be diplayed as new screen and not as subscreen.
Jogdand M B
Message was edited by:
Jogdand M B

How to call standard form in custom form

sir,
please help me .in calling standard form through custom form
Edited by: user11996389 on May 15, 2012 10:00 PM

Hi,
As far as I understand, you have a standard form, S and a custom form, C. You want to call S from C.
The API mentioned in my previous reply is the standard way to call one form from another in Oracle Apps. You may invoke this API from a trigger like WHEN-BUTTON-PRESSED. The API has a few mandatory parameters which you need to provide in order to successfully call the form. As mentioned, please refer to the Developer's Guide.
If you have any doubts or face any problems/errors, post the details here. Forums members will be reluctant to help if you do not put in some efforts of your own.
Regards,
Sujoy

[Best practice] How to call a service from custom Java code

Hi all,
I'm wondering what the best method is to call a standard service from custom Java code?
In a specific situation iDoc script is extended with custom functions with a custom component. There's Java code mapping to these functions that is executing these functions. The iDoc script functions are called from a workflow entry script.
In the Java code that runs when the custom iDoc functions are called, I want to call a standard Content Server service. I don't think that the m_service variable is available, so filling the binder and using m_service.executeService() probably isn't possible.
Also, if it were possible (that is, if I want to call a standard service from my own custom service Java code), what would then be the best method to do so?
Regards, Stijn

Hi Sapan,
Let me explain a bit further.
I'm an UCM consultant trying to solve a problem that occured at a client when they installed the CS10gR35CoreUpdateBundle.
Content items are entered into a Workflow when they are checked in. Part of one of the entry scripts of the a workflow step is that related content to the content item in the workflow is (re)submitted for conversion.
To achive this, a custom component provides an iDoc script extension. This iDoc function (resubmitForConversion) is implemented in Java (the class extends ScriptExtensionsAdaptor).
In this Java method, first the related content items are fetched. Then the service RESUBMIT_FOR_CONVERSION should be called for all dID's in of the related content.
Thus, at a certain point in the custom Java code, a native Content Server service must be called. Of course the class of this Java code does not extend the Service class, so the m_service object isn't available.
The thing is: before installed the 10gR35CoreUpdateBundle everything worked OK. This code was used to execute the service:
        Workspace workspace = CommonUtils.getSystemWorkspace();
        String cmd = binder.getLocal("IdcService");
        if (cmd == null) throw new DataException("!csIdcServiceMissing");
        ServiceData serviceData = ServiceManager.getFullService(cmd);
        if (serviceData == null) throw new DataException(LocaleUtils.encodeMessage("!csNoServiceDefined", null, cmd));
        Service service = ServiceManager.createService(serviceData.m_classID, workspace, null, binder, serviceData);
        UserData fullUserData = CommonUtils.getFullUserData(userName, service);
        service.setUserData(fullUserData);
        binder.m_environment.put("REMOTE_USER", userName);
        ServiceException error = null;
        try {
            service.setSendFlags(true, true);
            service.initDelegatedObjects();
            service.globalSecurityCheck();
            service.preActions();
            service.doActions();
            service.postActions();
            service.updateSubjectInformation(true);
            service.updateTopicInformation(binder);
        } catch (ServiceException e) {
            error = e;
        } finally {
            service.cleanUp(true);
            if (!CommonUtils.isWorkspaceConnectionInTransaction(workspace)) {
                 workspace.releaseConnection();
        }the first problem was that the CS began to complain that a transaction was started within another transaction. So I suspect that the 10gR35 update wrapped a transaction around a workflow script entry.
With some decompiling I figured out how a service is called from iDoc with the <$executeService()$> command. So I replaced the code above with:
              String cmd = binder.getLocal("IdcService");
            ServiceData serviceData = ServiceManager.getFullService(cmd);
            if (serviceData == null) throw new DataException(LocaleUtils.encodeMessage("!csNoServiceDefined", null, cmd));
            Workspace workspace = CommonUtils.getSystemWorkspace();
            Service service = ServiceManager.createService(serviceData.m_classID, workspace, null, binder, serviceData);
            UserData fullUserData = CommonUtils.getFullUserData(userName, service);
            service.setUserData(fullUserData);
            binder.m_environment.put("REMOTE_USER", userName);
            service.initDelegatedObjects();
            service.executeSafeServiceInNewContext(cmd, true);This solved the transaction problem but introduces another problem: !csUnableToResubmitItem,(null)!csIllegalScriptAccess,RESUBMIT_FOR_CONVERSION
The Service Reference Guide says that the access level for RESUBMIT_FOR_CONVERION is 33 (Read, Scriptable). However, in shared/config/resources/std_services.htm the access level is specified as 2 (write).
Thus, my question still is:
What is the best method to call a standard Content Server service from any Java code (so without extending the Service class, or having the m_service object available)?

How to save the instance in standard lead from custom business object

Hi Experts,
I am unable to save the instance(Record) in standard Lead business object from custom business object.
Steps:
created one custom business object with mandatory fields for creating instance in standard lead.
in quick create screen i bind data elements to standard lead business object elements.
issue:
when i click on preview i am getting exception as Arguments not found
can you please tell me that How to save the instance in standard lead from custom business object with step by step .

Hi Vijay,
Please refer this link under that mentioned that how to create lead using ABSL code
Web 2 Lead in SAP Cloud for Customer, step by step - Part 1 - myCloudDoor myCloudDoor
Under the "Action-CreateLead.absl" mentioned how to create lead
the above link for convert web 2 lead functionality and under they create lead using web data from ABSL code.
Regards,
Mithun

CALL TRANSACTION 'ME33K from another program

Hi,
I ma trying to CALL TRANSACTION 'ME33K from another program, but it is not working. The transactions is opening, but it is not opening with the contract number (ls_ekpo-ebeln) i am passing.
ls_ekpo-ebeln does have a valued when CALL TRANSACTION 'ME33K is called.
In debug, I noticed the "value" is blank when step into CALL TRANSACTION 'ME33K .
   WHEN 'EBELN'. "Contract
      l_field = 'EVRTN'.
     IF ls_ekpo-ebeln <> ''.
        GET PARAMETER ID 'VRT' FIELD l_field. "EVRTN.
       SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
       CALL TRANSACTION 'ME33K AND SKIP FIRST SCREEN.
        SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
      ENDIF.
Any help or suggestions would be great.
Thanks,
Naing

Dear Naing,
I execute the same code
IF ls_ekpo IS INITIAL.
GET PARAMETER ID 'VRT' FIELD LS_EKPO.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
CALL TRANSACTION 'ME33K' AND SKIP FIRST SCREEN.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
ENDIF.
And it is working.
Try to do de simple sintax.
A program with one pararmeter to introduce the contract number.
The set parameter for this parameter and the call transaction.
I´m waiting your comments.
Regards.
Antonio.

Probe in calling tabstriped screen from another screen ..

hi
could any one please help me ,,,that what is the logic for calling tabstriped screen from another screen ..
Thanks N Regards
Priya

Hi,
Jonathan.
Thanks for the response ...
I did execute with call screen statement ...(CALL SCREEN 0123). ..when i excute the program its working fine ,but the same programe when I execute with the T.CODE ...its giving erorr ...
ERORR:Program " ZTEST "tried to use screen 000.
        the screen doesn't exist.
HERE IS CODE.
let me know where is the mistake ..
could you please , help me ,,what i suppose to do .
let me know where is the mistake ..
REPORT ZTEST .
DATA: DATE LIKE SY-DATUM,
       TIME LIKE sy-uzeit.
DATA number TYPE sy-dynnr.
CONTROLS tabstrip TYPE TABSTRIP.
tabstrip-activetab = 'TAB1'.
number = '1003'.
tabstrip-activetab = 'TAB2'.
number = '1004'.
CALL SCREEN 1000.
*&      Module STATUS_1000 OUTPUT
      text
MODULE STATUS_1000 OUTPUT.
CASE : SY-UCOMM.
    WHEN 'ENTER'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'MOD'.
          DATE = DATE.
          TIME = time.
          SCREEN-INPUT = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
ENDCASE.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
    WHEN 'ENTER'.
      LEAVE TO SCREEN 1001.
endcase.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
*&      Module USER_COMMAND_1001 INPUT
      text
MODULE USER_COMMAND_1001 INPUT.
CASE SY-UCOMM.
        WHEN 'button1'.
        CALL SCREEN 1002.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_1001 INPUT
*&      Module USER_COMMAND_1002 INPUT
      text
MODULE USER_COMMAND_1002 INPUT.
    CASE sy-ucomm.
      WHEN 'TAB1'.
        number = '1003'.
      WHEN 'TAB2'.
        number = '1004'.
    ENDCASE.
    ENDIF.
ENDMODULE.                 " USER_COMMAND_1002 INPUT
*&      Module STATUS_1002 OUTPUT
      text
MODULE STATUS_1002 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1002 OUTPUT
Thanks N Regards.
Priya.

How to connect iseries green screen from java program

how to connect iseries green screen from java program to get the data in the DB files ,here the DB is DB2/400

Just some Friday fun. Use the telnet program that comes with Windows and supports VT escape sequences.
import java.io.*;
import java.net.*;
public class AutoTelnet {
     private static Socket s;
     public static void main(String[] args) throws Exception {
          Thread t = new Thread() {
               @Override public void run() {
                    try {
                         s = new ServerSocket(5555).accept();
                    } catch (IOException ex) {
                         ex.printStackTrace();
          t.start();
          Process p = new ProcessBuilder("cmd", "/C", "start", "telnet", "127.0.0.1", "5555").redirectErrorStream(true).start();
          t.join();
          PrintStream ps = new PrintStream(s.getOutputStream());
          ps.println("Screen will be cleared in 5 seconds");
          ps.println("5");
          Thread.sleep(1000);
          ps.println("4");
          Thread.sleep(1000);
          ps.println("3");
          Thread.sleep(1000);
          ps.println("2");
          Thread.sleep(1000);
          ps.println("1");
          Thread.sleep(1000);
          ps.println("\u001b[2J");
          Thread.sleep(5000);
}

Can we call a BDC from REPORT program.

hi
can anybody tell me that
can we call a BDC from REPORT program.
thanks&regards

Yes, It can be called.
Infact you can generate a program from SHDB recording and in the program generated you can put necessary report logic and call the BDC/CALL TRANSACTION as required.
<b>Please check here for a sample program,</b>
http://www.sapdevelopment.co.uk/bdc/bdc_ctcode.htm
Regards
Kathirvel

How can we use the standard LDB in custom program.

Dear all,
can you please tell me the way , how can we use the standard LDB in custom program.
Thanks & Regards,
Jyothi.

Hi
You can use the Function module LDB_PROCESS to use the Standard LDB in your Z custome program for further details about using the Standard LDB and accessing the LDB in to the program search SDN
http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/97/b3edb8163111d2953c0000e8353423/frameset.htm

Calling Standard screen from custom program

Similar Messages

Maybe you are looking for