Calling transaction iview and coming back to abap iview

Hello all,
Is it possible to call a transaction iview from abap webdynpro application iview and come back to it after we are finishing running the transaction? I know I can use the navigate_absolute method to call the transaction iview but i want to know if we can come back to the original abap iview, which called this transaction iview.
resume suspend is not an option since they do not work in portal as per the sap help.
Thanks.
J.

thanks

Similar Messages

CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .

Hi all,
i hope there is someone that can help me.
My problem is: in an ABAP custom report in a FORM user-command my code is
CASE ls_selfield-sel_tab_field.
    WHEN 'ITAB-BELNR'.
      IF NOT ls_selfield-value IS INITIAL.
        SET PARAMETER ID 'RBN' FIELD ls_selfield-value.
        CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .
ENDCASE.
When i click on output field of my report, not skip first screen but only call MIR6!!!
How can i solve this problem?
Regards.

Hi,
First of all Please don't use all Caps for Subject Line
Test Following Sample Code it will solve out your problem,
DATA: it_bdcdata TYPE TABLE OF bdcdata,
      wa_it_bdcdata LIKE LINE OF it_bdcdata,
      belnr(10).
belnr = '100'. " Give Document Number here
DATA opt TYPE ctu_params.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-program = 'SAPMM08N'.
wa_it_bdcdata-dynpro   = '100'.
wa_it_bdcdata-dynbegin = 'X'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'SO_BELNR-LOW'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'SO_BELNR-LOW'.
wa_it_bdcdata-fval = BELNR.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_OKCODE'.
wa_it_bdcdata-fval = '=CRET'.
APPEND wa_it_bdcdata TO it_bdcdata.
opt-dismode = 'E'.
CALL TRANSACTION 'MIR6' USING it_bdcdata OPTIONS FROM opt.
Please Reply if any Issue,
Best Regards,
Faisal

Call transaction 'LS33' and skip first screen.

This doesn't work:
set parameter id 'LEN' field '04018091'.
call transaction 'LS33' and skip first screen.
I've found this:
<a href="https://www.sdn.sap.com/irj/sdn/message?messageID=3715690">https://www.sdn.sap.com/irj/sdn/message?messageID=3715690</a>
but I'm not sure about the exact meaning (wouldn't know where to put the *)
nor even about if it applies.
Thanks in advance.

Sorry, I mistook this forum for that of ABAP General.
Anyway, the answer is in
Call transaction 'LS33' and skip first screen.

CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.

Hi,
i'm using this in an report.
SET PARAMETER ID 'BES' FIELD WA_ITAB-EBELN.
SET PARAMETER ID 'BSP' FIELD WA_ITAB-EBELP.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
It works OK.
Is there any parameter ID to go in a sprecial part of an PO, for example
direct to materialdata or konditions?.
thanks.
Regards, Dieter

Hi,
I think u can do that by using BDC as used in this code please refer to this code.
FORM get_user_command USING cr_ucomm     LIKE sy-ucomm      "#EC *
                            cr_selfield TYPE slis_selfield.
CLEAR wa_final.
DATA BEGIN OF bdcdata OCCURS 10.
          INCLUDE STRUCTURE bdcdata.
DATA END OF bdcdata.
CASE cr_ucomm.
    WHEN '&IC1'.
      READ TABLE it_final INTO wa_final
               INDEX cr_selfield-tabindex.
      IF cr_selfield-fieldname = 'MATNR'.
        IF sy-subrc IS INITIAL.
          SET PARAMETER ID 'MXX' FIELD 'E'.
          SET PARAMETER ID 'MAT' FIELD wa_final-matnr.
          SET PARAMETER ID 'WRK' FIELD wa_final-werks.
          CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
        ENDIF.
      ELSEIF cr_selfield-fieldname = 'LIFNR'.
        IF sy-subrc IS INITIAL.
          CLEAR bdcdata.
          bdcdata-program = 'SAPMF02K'.
          bdcdata-dynpro   = '0101'.
          bdcdata-dynbegin = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-LIFNR'.
          bdcdata-fval     = wa_final-lifnr.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-EKORG '.
          bdcdata-fval     = wa_final-ekorg.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-D0310'.
          bdcdata-fval     = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'WRF02K-D0320'.
          bdcdata-fval     = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'BDC_OKCODE'.
          bdcdata-fval     = '/00'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-program = 'SAPMF02K'.
          bdcdata-dynpro   = '0110'.
          bdcdata-dynbegin = 'X'.
          APPEND bdcdata.
          CALL TRANSACTION 'XK03' USING bdcdata MODE 'E'.
        ENDIF.
      ENDIF.
ENDCASE.
ENDFORM. " get_user_command
regards,
sudha

CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN?

Hi, Gurus:
In my program, after I call 'CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.'    in the va02, user maybe do some change and save
then I want to get those change as the dollowing:
    select single uvall into c_complete_flag from vbuk
     where vbeln = lv_vbeln.
why I can't get the latest change.
Thanks,

VA02 usese the asynchronus update mehtod so, it gives you the message like "Order 1111 was saved" but the database update is still going on.
So, you need to wait for some time before facthing the data from the database.
You can use like:
WAIT UP TO 10 SECONDS.
But this statement will force you to wait for atleast 10 seconds before doing any thing.
Regards,
Naimesh Patel

Photoshop CS6 is not responding when leaving PS and coming back again

A weired problem: My new installation of Photoshop CS6 (OS X Mavericks on a new MBP) is not responding when leaving PS and coming back again.
Example: i open a new file in PS - then i click on the desktop - when i go back to PS again, it is not responding to any click on any window (except for the menu bar).
I can solve the problem when i try going back several times or when i go back to PS via the icon in the dock.
But it is still very annoying in a quick workflow.
I would appreciate any idea what i can check more, cause i tried everything and i can’t find this issue on the web…
Thanks…

Problem solved… The troublemaker was the Trackball Works Driver for Kensington trackballs / Expert Mouses…
I’m now using a generic driver for USB devices and everything is fine.

Alv grid - call transaction 'ME22N' and reflect the change made in alv grid

Hi,
<u>Scenario</u>
I have an alv list which has fields Purchase document no. (EBELN) and Item delivery date (EINDT). EBELN field is hot spot enabled. when i click on that transaction 'ME22' is called. I have done this using USER_COMMAND subroutine.the code is given.
      FORM USER_COMMAND                                             *
Call transaction ME22N on clicking Document number                 *
FORM USER_COMMAND USING F_UCOMM LIKE SY-UCOMM
                I_SELFIELD TYPE SLIS_SELFIELD.
DATA: F_SUBRC LIKE SY-SUBRC,
        s_arseg like G_T_PORD. "the internal table used is G_T_PORD
CASE F_UCOMM.
    WHEN '&IC1'.
      IF i_selfield-fieldname = 'EBELN'.
        READ TABLE G_T_PORD INDEX i_selfield-tabindex INTO s_arseg.
        SET PARAMETER ID 'BES' FIELD s_arseg-ebeln.
        CALL TRANSACTION 'ME22N' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
endform.
<u>Requirement</u>
After calling the transaction, If the user changes the Item delivery date (EINDT) at the ME22 transaction screen, the new date needs to be reflected in the ALV grid.
Plz help it is very urgent.

The first method (using selfield-refresh = 'X'.) didn't work as the internal table doesnt get modified when the user make changes in Item delivery date(EINDT) at ME22 transaction screen. The 2nd method is OO,which can't be used in my case.
I tried calling the subroutine for populating the itab (G_T_PORD) and the subroutine for displaying the alv grid immediately after calling ME22N transaction. Still it is not reflecting the new date in the output alv. The code is given below.
      FORM USER_COMMAND                                             *
Call transaction ME22N on clicking Document number                 *
FORM USER_COMMAND USING F_UCOMM LIKE SY-UCOMM
                I_SELFIELD TYPE SLIS_SELFIELD.
DATA: F_SUBRC LIKE SY-SUBRC,
        s_arseg like G_T_PORD.
CASE F_UCOMM.
    WHEN '&IC1'.
      IF i_selfield-fieldname = 'EBELN'.
        READ TABLE G_T_PORD INDEX i_selfield-tabindex INTO s_arseg.
        SET PARAMETER ID 'BES' FIELD s_arseg-ebeln.
        CALL TRANSACTION 'ME22N' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
        refresh G_T_PORD.
        perform F1000_POPULATE_PO.
        perform F2000_DISPLAY_PO .
endform.

Call a webservice and get back a value within an ESB...

Hi!
I'd like to call a webservice and get back a value from it within an ESB. But I don't know how.
I think, I must create a routing service, then a SOAP service, but how can I get back the value from the webservice, which I called in the SOAP service?
Or it is not possible to realize this within an ESB?
Thank You very much!
Viktor

When you take a look at the Soa Orderbooking example you can see how it works. You create a webservice that accepts certain parameters and these are bundled into an object. This object, in case of the Soa Orderbooking example a 'PurchaseOrder', is described using an Xml Schema. The XML Schema is used to create the ESB with. Using this xsd the ESB knows which object it can expect and this object can be used inside your ESB or inside a bpel process.

ORA-06519: active autonomous transaction detected and rolled back

I am getting this error. when i am doing insert from my package Any solution to reslove this issue
ORA-06519: active autonomous transaction detected and rolled back . thanks
I am doing select - insert...

Also, if you have any exception handler sections in the code,
then you have to add a commit or rollback statement for
every exception that is handled.

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard. Anybody any idea what is occurring?

These Steps should resolve your issue
Step by Step to fix your Mac
If you don't have a backup of your data off the machine
Most commonly used backup methods
If you can't boot the machine and need to get data off it
Create a data recovery/undelete external boot drive
Your options for data recovery
My computer is dead, is my personal data lost?
Secure data removal
How do I securely delete data from the machine?
More:
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

Help me!:audio keeps dropping out and coming back in while importing clips

While importing from my camera (brand new Canon Xl-2) to imovie, the audio from the tape keeps dropping out and coming back in for some reason.This happens with all my tapes. I've tried using a head cleaner and that didn't help. I'm using a Maxtor external hard drive to save the project on. The project itself is kind of big (about 80 GB) Can imovie support projects that large? Could this be a problem with my processor?
I'm just frustrated beyond belief right now. Any help you can give would be greatly appreciated. Thanks!
these our my specs: Processor: 800 mhz. Memory: 1GB SDRam. The disk space icon at the bottom of imovie says i have 151 GB of disk space left.
powermac g4 Mac OS X (10.4.5)

Hi e
With a slow computer one has to minimize the hassle.
I would
- repair permissions
- cheque that nothing else is taking resourses from the job (energy saver,
screensaver, File Vault etc.)
- I would move material to my ext hd so that I got > 80Gb free (for a 80Gb
project)
- nothing else connected than my Mac + Camera and import.
Yours Bengt W

Issue with using call transaction CJ9F and F.M BAPI_PROJECT_MAINTAIN

Hello All,
In my custom program for a given project in selection screen we are getting all the related data as shown in CJ20N, in this screen I first created the WBS element and during save we used F.M BAPI_PROJECT_MAINTAIN to update the data, and next called transaction CJ9F to update BLC, after this we are comming back to selection screen 1000.
Now from selection screen if i enter again into that project details screen and try to create a new WBS it is showing below information msg.
Changing the contents of the field is not permitted
Message no. CJ727
If i remove the call transaction CJ9F part during save i am not getting the above error msg.
I think i am getting this error when we call the function module BAPI_PROJECT_MAINTAIN twice in the program.
Please help me to resolve this issue, as this msg is not allowing to save or create anything.
But i found that if i come totally out of my custom transaction and enter once again into that Z transaction it is working fine with out that message
Please help me to resolve this issue.

Hi,
Not sure, but if it is possible, complete your project update using the custom transaction and do the CJ9F afterwards seperately.
Regards
Sreekanth

Conversion of ABAP struct to XML and XML back to ABAP structure in ECC

We would like to convert many ABAP structure and internal tables into an XML string and later on convert these XML strings back to ABAP structures and internal tables. Can someone let us know if there are any function modules in ECC which can import the structures or internal tables and export the XML. Also if there are any function modules which can do the reverse i.e. import the XML string and convert it back to Structure or internal table.
We found the some method called "Call transformation" but it gives an error such as version not active. CRM has FMs which do these functionalities.
Any guidance would be appreciated.
Thanks.

If you look into the FM's BANK_API_PP_UT_DATA_TO_XML and BANK_API_PP_UT_XML_TO_DATA they again use CALL TRANSFORMATION, so probably u might have to figure how to eliminate the errors ur getting using CALL TRANSFORMATION.

CALL TRANSACTION VK13 AND SKIP FIRST SCREEN

Hi,
I'm using ALV report and i want to call the the Tcode VK13 from alv and skip the screens.
I have declared form user_command and calling from the "REUSE_ALV_LIST_DISPLAY".
The actual issue is how to select the radio button in the pop up window and also skip the next screen to go the condition records screen when calling tcode VK13 by passing parameters.
CALL TRANSACTION VK13 .
Help is highly appreciated.
Thanks,
Kash

Hello,
    As per the requirement I understood that you have to skip more than one screen in VK13 transaction.
For this purpose, write a BDC (Upto the screen you want ) and use it in a call transaction .
You have to do a partial BDC to the transaction VK13, providing all the data that is required to get to the screen you want and use the statement
Call transaction 'VA03' using it_bdcdata mode 'E'...
(IT_BDCDATA should have the information that is necessary to fill in the screens of VA03.)
Eg:
DATA: bdcdata_wa TYPE bdcdata,
          bdcdata_tab TYPE TABLE OF bdcdata.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSEOD'.        "Pass pgm name
bdcdata_wa-dynpro   = '1000'.                    "Pass your screen you want to call
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.                                         "Optional
bdcdata_wa-fnam = 'BDC_CURSOR'.                  "Optional
bdcdata_wa-fval = 'SEOCLASS-CLSNAME'.        "Optional
APPEND bdcdata_wa TO bdcdata_tab.              "Optional
CALL TRANSACTION 'VK13' USING bdcdata_tab
                            MODE 'E'
                            UPDATE 'A'
                            MESSAGES INTO g_t_bdcmsgcoll.
Regards,
Lijo

Fillable PDFs created on a PC, filled in a Mac and coming back completely blank

I've got protected fillable pdf forms and the only edits allowed are printing or filling in form fields. These have been created in Acrobat XI pro on a PC.
When a document is sent to a customer who happens to have a Mac, they fill in whatever is needed, save the document and send it back to us. When the documents are coming back, the only thing we can see on them is the fillable form fields. Everything else has gone - the actual base document and the accompanying pages of terms and conditions are just blank pages.
Anyone got any ideas what's going on??
Thanks
Jackie

Would the preview also make everything else on the document disappear?
this is what we should see
and this is what we're getting back (I've added the workds 'text field')

Calling transaction iview and coming back to abap iview

Similar Messages

Maybe you are looking for