Calling VI through VI server with Debug Option

Hi All,
I am building application in which I have my own operator Interface (Application.exe(source code is in VI Server. I) which is a exe built using LabVIEW in which i am basically calling another VI(Test call)through VI server concept. When run the operator interface i want the Test call to open in debugging mode(Breakpoint, Probe etc).How to run Calling VI from Development Mode can anybody have suggestions.
Please find the source code and exe.
Testcall.vi is calling VI.
VI server.vi is operator Interface.
Application.exe in build folder is the exe.
Regards,
Satya  
Attachments:
VIserver.zip ‏133 KB

I'm sure there is a better way to do this, but here is what I do...
For the VI that I am calling, I place a breakpoint at the start of its code, save it, and close it. Then I run the VI that calls that VI. When the breakpoint is hit the called VI's block diagram will pop up and it will be paused.
Does that help?

Similar Messages

  • Compiling with debug option

    How to give user Compiling with debug option, i have try to by giving grant debug any procedure and debug connect session but it failed.
    Any ideas?
    Edited by: rootsman on Jul 15, 2010 12:00 AM

    Post the error screenshot..
    eg:
    grant DEBUG CONNECT SESSION to username;
    grant DEBUG ANY PROCEDURE to username;
    Check the below explanation:
    DEBUGGING:
    DEBUG CONNECT SESSION
    Connect the current session to a debugger that uses the Java Debug Wire Protocol (JDWP).
    DEBUG ANY PROCEDURE
    Debug all PL/SQL and Java code in any database object; displayinformation on all SQL statements executed by the application
    Note: Granting this privilege is equivalent to granting the DEBUG object privilege on all applicable objects in the database.

  • On demand call recording on QM server with CUCM

    Hi ,
    I have a customer who wants to enable on-demand call recording on QM server .
    Is there a plugin that needs to be installed on Cisco side to make it happen .
    QM Server 9.0.1.57
    Calabrio Call Recording: 8.8.1.57
    Calabrio Quality Management: 8.8.1.57
    Call Manager 9.1.1
    UCCX 9.0.2
    or any infomation regarding that would be helpful
    Thank you

    This is something I have not done before, but I recall seeing the feature for IP Phones.  It was an IP Phone Service which showed a menu for starting and stopping recordings for workers without a PC.
    On the QM 9.0 Data sheet, the feature is mentioned in the following bullet point:
    - The ability to control recording for manual start,  pause, and add metadata through Cisco Agent Desktop or Calabrio recording control browser or IP phone applications
    Source: http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps8293/data_sheet_c78-710576.html#wp9000180
    I'm looking for the documentation to configure this feature.  Unfortunately, Calabrio has their own documentation and support site @ portal.calabrio.com which only Cisco partners can access (something I am not).  The answer may reside there.  I'll post back if I find the IP Phone Service URL to use.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Weblogic 8.1 startup with debug options and struts

    I'm trying to startup weblogic 8.1 with the set debug=-Xdebug -Xnoagent -Djava.compiler=NONE
    -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=7021
    option...it will not start up because of something in my .war file however it
    does start up fine without the debug settings.
    Attached is my war file...
    [calendar.war]

    The procedure is the same for Oracle database and MySQL. Except the driver class and connection url are different.
    Please refer
    http://weblogic.sys-con.com/node/43045

  • URL to run from through Application Server

    Hi,
    Anyboyd would like to tell me URL of calling form through Application Server 10.1.2 like "http://lenovo/forms/frmservlet" what next ?
    Regards

    Probably want to post this on the Forms Forum and not here. Try:
    direct form call is -
    http://server:port/forms90/f90servlet?form=test.fmx&parameter=value...or config call is -
    http://server:port/forms90/f90servlet?config=appconf&parameter=value...

  • Presentation server with mozilla

    Hi all,
    I am facing an issue while logging through presentation server with mozilla...I am successfully able to access presentation server with IE.The issue is happen only while accessing with mozilla.

    Hi sonal,
    You are unable to access means either mozilla version should be 3 or greater.....any error its firing out.
    Is the Presentation server starting or hanging??Use the same link that you are using for IE in mozilla and check out....more information needed.
    By,
    KK

  • Calling a Web Server with HTTP POST to retrieve XML in chunks

    Hi,
    I have to call a Web Server with the HTPP POST method by providing the user id and password. I am getting the xml as output from the web server in chunks. This is possible through net.HTTPUrlConnection Java Api. But does any body knows how to implement this through OSB.
    Regards,
    Anuj Maheshwari

    sample usage:
      CALL FUNCTION 'HTTP_POST'
        EXPORTING
          ABSOLUTE_URI                = IM_OFX_CONTROL_DATA-ADDRESS
          REQUEST_ENTITY_BODY_LENGTH  = RESPONSE_ENTITY_BODY_LENGTH
          RFC_DESTINATION             = IM_OFX_CONTROL_DATA-HTTP_RFCDEST
          USER                        = IM_OFX_CONTROL_DATA-HTTP_USER
          PASSWORD                    = IM_OFX_CONTROL_DATA-HTTP_PASSWORD
          BLANKSTOCRLF                = 'X'
        IMPORTING
          STATUS_CODE                 = STATUS
          STATUS_TEXT                 = STATUS_TEXT
          RESPONSE_ENTITY_BODY_LENGTH = RLENGTH
        TABLES
          REQUEST_ENTITY_BODY         = LT_REQUEST
          RESPONSE_ENTITY_BODY        = RESPONSE
          RESPONSE_HEADERS            = LT_RESPONSE_HEADERS
          REQUEST_HEADERS             = LT_HTTP_HEADERS
       EXCEPTIONS
            OTHERS                      = 1.
    Refer the programs:
    LFPIFF02            
    LOFXALSU04          
    LPRGN_URL_RESPONSEU01
    LSBCCU01            
    LSFTPU09            
    for some idea.
    regards,
    ravi

  • How to call dicoverer through menu option in forms

    Hi,
    Need help.........Can anybody tell me .....how to call dicoverer through menu option in forms.
    Thanx
    Sunil

    Hi,
    You can define a Form Function filling the basic information and
    HTML call Set as OracleOasis.RunDiscoverer. You can even define Paramters during the form function registration. With this definition you will able to create a link to a Discoverer workbook that will automatically open Discoverer Plus or Viewer to display the workbook using Apps security.
    Please refer to the following Metalink Note for more details:
    278095.1- How to Create a Link to a Discoverer Workbook in Apps11i
    Hope This helps
    - Sanjeev

  • Start weblogic server in debug mode through command prompt

    Hi,
    Please help me in starting the weblogic server in debug mode through command prompt.I am using weblogic 10.3.6 app server.
    Thanks

    Hi,
    To debug weblogic startup issues you can pass the below jvm arguments:
    -Dweblogic.slc=true
    -Dweblogic.debug.DebugServerLifeCycle=true
    Debug options are available in weblogic based on the subsystem, such as security, jms, jdbc, deployment..etc
    You can refer to :
    https://blogs.oracle.com/vijaya/entry/weblogic_web_service_debug_flags
    Thanks,
    Sharmela

  • Opening a file from server with options

    Hi all,
    I have one small problem.
    I have one radio group with two options. One is "open with wordpad" and the other is "open with notepad".
    There is one button with name "View", which when clicked, what ever option which is selected in the radio group, based on that i should be able to open a file which is there on the app server using the option selected.
    I'm not getting how to open the file which is there on server and with these options.
    Please help me with this problem.
    Regards,
    Sonu

    You can achive the same by following two methods. Since the file is in app server, you cannot directly view the file using client server method. But try the following options, its little bit long work around, even though there is no other way i think.
    1. Create a virtual directory for that folder in the app server. The same can be configued in the httpd.conf and then restart the http server.
    You can call the particular file like http://ipaddress:80/<vir-directory>/<your file name>
    In your forms view button, try to call the above url using web.show_docuement. FIle will be opened in a new web browser.
    Or
    2. Configure webutil in your forms and app server. Try to download the file from app server to your client machine using As_to_client funtion. And the using client_host command, you can call your file as you wish.
    Balaji

  • Report generated through BIP Server not in sync with data updated in DB

    Hi,
    We have an issue where the BIP report show up the old value instead of the latest updated & commited value done from Application(ADF) on the same session or transaction.
    Does BIP have any caching mechanism implemented internally for a user context?
    Detailed Explanation :
    After verifying several scenarios, following are the scenarios which reproduced the cache issue in our application:
    Case -1:
    1) Logged in as user "User1".
    2) Navigated to page where we can update data and we have option to print/generate the report.
    3) Now made some updates in the page and saved it.
    4) Now generate the report, report is generated with the updated information.
    5) Now close the report generated and update the page with some other modifications and save it.
    6) Now generate the report, but the report doesn't have the updated info.
    Case-2:
    1) Logged in as user "User2".
    2) Navigated to page where we can update data and we have option to print/generate the report.
    3) Generate the print profile report, you see the changes made above with "User1" login.
    4) Now close the report generated and update the page with some more modifications and save it.
    5) Now generate the report, but the report doesn't have the updated info.
    Seems like, the request sent to BIP server is being cached at BIP server with its response considering the key with following format:
    <Login User-id> + <Request Parameters> .
    We are thinking this way because, in both Case-1 and Case-2, if we are modifying the request parameters values (fields to be shown in the generated report) uniquely for each new request,
    then we are seeing the changes updated in DB are present in the report generated.
    Can someone give inputs, how to overcome this issue?
    Thanks,
    Kiran Kumar

    if you are using the cold backup to create the standby database, Check that have you followed the following steps or not.
    1. remove
    all the datafiles and controlfiles from the standby database.
    2. Create a new standby controlfile of the production for standby using the following cmd
    'alter database create standby controlfile as 'Location';'
    3. move the new controlfile to standby database server location as specified in initialization parameter file.
    4. Restore all the datafiles to its appropriate loaction which was taken through cold backup.
    5. startup nomount
    6. alter database mount standby database;
    7. recover standby database.
    scp the archive log sequence that is asked by the database, from production.
    You can try this steps.

  • Calling Report Builder From Server(aspx page ) With encrypted username and password

    Hi , 
    Our application needs to have a link to Report Builder which will open a report builder for that current report and user can modify it accordingly.
    Currently our approach is to use a client side(JavaScript) url link which is in form as follows
    http://username:password@domain/ReportServer_SQLDEVELOPER/ReportBuilder/ReportBuilder_3_0_0_0.application?/ReportName
    But we do not want to show username and password in clear text , SO we have tried to pass it through ajax call and call the url from server or pass username and password in Authorization headers . Unfortunately , this does not serve our purpose and we are
    getting Unauthorized in firebug Console .We are using REST Services .Below is screenshot:
    This is a kind of blocker issue for us , So any timely help would be highly appreciated.In case of any queries you can contact me at [email protected]
    Thanks & Regards
    Mohit Methi
    NGC

    Put the domain in the Intranet Zone instead, and try again. They should not be prompted for auth as long as they log in with cached Domain Creds.
    Is the SharePoint site configured to allow NTLM?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Skip first screen of BD87 using call transaction with BDC_DATA option

    hello all,
    i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
    regards.

    Hi
    Build a BDCDATA with following code..
                                                          T     BD87                                                                               
    RBDMON00     1100     X                                                                               
    BDC_CURSOR     SX_DOCNU-LOW
                                                                BDC_OKCODE     =CRET
                                                                SX_DOCNU-LOW                                                                               
    SX_CRETI-LOW     00:00:00
                                                                SX_CRETI-HIGH     00:00:00
                                                                SX_UPDDA-LOW     05.02.2010
                                                                SX_UPDDA-HIGH     05.02.2010
                                                                SX_UPDTI-LOW     00:00:00
                                                                SX_UPDTI-HIGH     00:00:00
    RBDMON00     0100     X                                                                               
    BDC_OKCODE     =BACK
    RBDMON00     1100     X                                                                               
    BDC_OKCODE     /ECBAC
                                                                BDC_CURSOR     SX_DOCNU-LOW

  • How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

    Dear All,
    We are having an infrastructure setup of around 500 client computers managed through group policy.
    Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
    Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
    It would be great if you can assist me with the following query.
    How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
    Can we disable Network Tab on the left hand pane ?
    explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

    >   * explorer.exe is blocked already, but users are able to enter the
    >     Windows Explorer by clicking on the name which is visible on the
    >     Start Menu.
    You cannot block explorer.exe when you do not replace the shell - the
    desktop you see effectively IS explorer.exe...
    Your requirement sounds like you need a custom shell:
    http://gpsearch.azurewebsites.net/#2812
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Call to a possibly undefined method getClipboardContents through a reference with static type flashx.textLayout.edit:ISelectionManager.

    Hi Guys,
    As i am using the nigtly build of TLF 4.0.0.11073.
    I want to copy some text from the TLF, by copy operation. I am getting this type of Error.
    - Call to a possibly undefined method getClipboardContents through a reference with static type flashx.textLayout.edit:ISelectionManager.
    In the previous build, i dont use to get this type of error, but in this nightly builds i am getting this type of error.
    Can anyone help me to fix the same or any workaound.
    Thanks in advance.
    Krishna

    This functionality is still available, but it has moved. It's now in a TextClipboard class, in the same flashx.textLayout.edit package. So you should replace calls to getClipboardFormat() with TextClipboard.getContents().
    Hope this helps,
    - robin

Maybe you are looking for