On demand call recording on QM server with CUCM

Hi ,
I have a customer who wants to enable on-demand call recording on QM server .
Is there a plugin that needs to be installed on Cisco side to make it happen .
QM Server 9.0.1.57
Calabrio Call Recording: 8.8.1.57
Calabrio Quality Management: 8.8.1.57
Call Manager 9.1.1
UCCX 9.0.2
or any infomation regarding that would be helpful
Thank you

This is something I have not done before, but I recall seeing the feature for IP Phones. It was an IP Phone Service which showed a menu for starting and stopping recordings for workers without a PC.
On the QM 9.0 Data sheet, the feature is mentioned in the following bullet point:
- The ability to control recording for manual start, pause, and add metadata through Cisco Agent Desktop or Calabrio recording control browser or IP phone applications
Source: http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps8293/data_sheet_c78-710576.html#wp9000180
I'm looking for the documentation to configure this feature. Unfortunately, Calabrio has their own documentation and support site @ portal.calabrio.com which only Cisco partners can access (something I am not). The answer may reside there. I'll post back if I find the IP Phone Service URL to use.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Similar Messages

Integration of Cisco Fax Server with CUCM

Need some help with regards to the setup of Cisco Fax Server. I have Cisco Fax Server 9.4 Enterprise Suite which will be installed on Cisco 7816 server. Now my concern is with the integration of Fax server with CUCM. I have CUCM Ver 7. Could anyone tell me what configuration is required on CUCM and I believe we need to have dial-peer on the Voice gateway as well pointing to the Fax server. If anyone has deployed then please let me know the configuration on CUCM & the voice gateway.

Hi..
Thank u so much guys. I was mostly looking out for the integration of Fax server with CUCM, so i think this document should help. I has this document with me but had few doubts. Hopefully it should be cleared now. I will be doing the implementation later next week so i will keep you updated. Anyway thank u so much once again.
Regards,
Joy

Cisco Unified WFO - Call Recording and Quality Management with Extension Mobility agents

Hi All,
We're considering Cisco Unified WFO - Call Recording and Quality Management for a customer running UCCX 8.0, agents on multiple WAN sites, all agents using extension mobility.
The documentation I've been able to find describes three different recording methods:
Using Desktop Recording service (Endpoint) to record from an agent’s desktop.
Server Recording - Uses SPAN (not so good for remote sites)
Network Recording - Uses CUCM recording service / SIP trunk / phone's built in bridge.
Network recording or Desktop recording should be suitable for the customer but it seems that Extension mobility is not supported. Extension Mobility is not mentioned in the 8.5 installation guide, it is mentioned as ‘not supported’ in the 8.0 guide as follows:
'Server Recording and Network Recording have the following limitations:
• Extension mobility is not supported.'
Neither version's documentation specifically mention extension mobility in relation to the desktop recording method, though I realise this is a similar approach to the 'server recording' method.
So the question I have is: Is extension mobility supported in any way on version 8.0, or version 8.5 for recording? And if so which recording method(s) are supported?
Thanks,
Jonathan

Hi,
I had more luck asking questions over at the Calabrio forum - they make the software and Cisco re-brand a version of it - there is some good info on their portal (http://portal.calabrio.com), you have to register but it's fairly painless. The answer I got was:
"QM Desktop recording has always supported extention mobility as it determines the recorded user by the desktop user's login. Extention mobility was not supported for Server and Network recording until the Calabrio QM 8.6.2 release in April 2011 and will be added to Cisco QM starting with QM 8.5.2 in June 2011"
Regards,
Jonathan

Calling VI through VI server with Debug Option

Hi All,
I am building application in which I have my own operator Interface (Application.exe(source code is in VI Server. I) which is a exe built using LabVIEW in which i am basically calling another VI(Test call)through VI server concept. When run the operator interface i want the Test call to open in debugging mode(Breakpoint, Probe etc).How to run Calling VI from Development Mode can anybody have suggestions.
Please find the source code and exe.
Testcall.vi is calling VI.
VI server.vi is operator Interface.
Application.exe in build folder is the exe.
Regards,
Satya
Attachments:
VIserver.zip ‏133 KB

I'm sure there is a better way to do this, but here is what I do...
For the VI that I am calling, I place a breakpoint at the start of its code, save it, and close it. Then I run the VI that calls that VI. When the breakpoint is hit the called VI's block diagram will pop up and it will be paused.
Does that help?

Click to Call Release 8.0 working with CUCM 9.0?

Hi
The title pretty much says it all
I'm following the installation guide for Click to Call 8.0 here
http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/click_to_call/8.0/english/install/guide/c2c_install.html
But I have CUCM 9.0 and I can't find any info on whether this should work.
Webdialer is fine and I can make calls. But when trying to configure Click to Call on a PC I get stuck at an error message "Enter your Cisco Unified Communications Manager account information."... even though I have...
Thanks in advance for your help
Regards
Tim

Hi Tim,
From the release notes it looks like you would need 8.1
Here's the 8.0 requirements;
Server Requirements
Item Requirement
Cisco Unified Communications Manager
•Cisco Unified Communications Manager version 6.x, 7.x, or 8.x, or Cisco Unified Communications Manager Business Edition version 7.x or 8.x.
http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/click_to_call/8.0/english/release/ReleaseNote_c2c.html
And the 8.1 requirements;
Server Requirements
Item Requirement
Cisco Unified Communications Manager
Cisco Unified Communications Manager version 6.x, 7.x, 8.x, 9.x or Cisco Unified Communications Manager Business Edition version 7.x or 8.x.
http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/click_to_call/8.1/CLIK_BK_CDBC4962_00_click-to-call-release-notes_chapter_00.html#CLIK_TP_S86316AE_00
Cheers!
Rob
"Spend your life waiting,
for a moment that just don't come,
Well, don't waste your time waiting"
-Springsteen

Cannot see USB call recording option on SPA525G2 connected to UC560

Cannot see USB call recording option on SPA525G connected to UC560. Phone is configured to use SCCP (not SIP). Firmware version downloaded to phone is 7.5.2c. Software pack 8.6.2 installed on UC560.
Can you please advise if USB Call Recording fuction is possible with this phone and UC560? If so, how do I configure this?
Thanking you in advance.

Hi I dont think it is a ethernet/wireless issue - wireless on XP laptop works in other networks and in fact can connect to TC router - I am just not seeing the TC when I use Airport on the Windows XP machine.
Taking a different approach - I have been able to set up a local pinter on the XP laptop using an IP port that points to the USB printer connected to the TC and this works.
I am still intrigued as to why Airport on XP cannot see the TC however the workaround is fine
Thanks for the ideas LaPastenague - much appreciated

CallManager 4.3 Call Records

Hi All,
Recetly I have implemented call manager 8.5 for one of my clients. Ealier they had 4.3 call manager which they completely scraped and went with a complete new implementation. After pulling the old MCS servers out I got a request from the On Site Support if he could get a backup of the Call Records which the old call manager have just for future reference.
Inside the Call Manager I found BARS (Backup and Restore System), I installed this and took a complete backup. The backup was a zip file, inside after digging thought the folders, I found a file CDR.DMP. I am i looking at the correct file? Or should i do something else for the call records.
Anyone with the knowledge with call manager 4.3 and Call records please assist me with this.

Here is whats supported
http://www.cisco.com/en/US/customer/prod/collateral/voicesw/ps6788/vcallcon/ps556/prod_bulletin0900aecd800f8572.html
TAC will probably tell you the same thing... if its not on the list, probably dont use it or use at your own risk

Lync 2010/2013 - Call Recording with PSTN

I am trying to find out more information about how larger companies use Lync while still recording calls to and from the PSTN. We have a huge need to be able to record specific (not all) calls in an on-demand fashion from the Lync client.
Lync seems to have some strange limitations with what it lets you record.
My issue is that Lync doesn't present options for recording calls to the PSTN unless you convert the call into a conference using some creative "tricks". Has anyone found a better way of doing this so that the user can just select record? It seems
extremely counter productive to say "hey here's our unified product", but if you need this really basic feature of a phone system you need a third party product. None of the third party products I've looked at actually integrate with Lync
in a way that the user just clicks record or some other option.
This is a major limitation of Lync for us and it is really holding up our ability to adopt Microsoft Lync. Does anyone have some good guidance on the best way to do PSTN recording with the Lync client?

Hi,Shaddie,
Yes,Lync doesn't support PSTN call except in a conferencing call,peer-to-peer call recording only works between Lync clients,and if someone call you via PSTN the call recording will not work, check the following links to have a workaround.
http://windowspbx.blogspot.com/2012/05/lync-user-tip-20-how-to-record-lync-to.html
http://blogs.perficient.com/microsoft/2011/02/call-recording-in-lync-2010-pstn-oddity/
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Cisco Unified WFO - Call Recording and Quality Management stops recording with conferenced translator

I'm having an issue whenever one of our employee's conferences in an external translator, as soon as they bridge the customer into the call with the translator QM stops recording. I can hear the intial conversation with the customer, and then the employee put the customer on hold and call the translator service. Only when the two are bridged together the call always stops recording.
We are performing all recording on the server side, and are not using Quality Manager Desktop agents.
Any help would be much appreciated. Thanks!
-Chris

So I found the following information listed below. I don't manage the Cisco Unified CM portion of our telco system. Can we limited the ourselves to a single Codec, and would this even resolve the issue. Does this cause other issues if we didn't limit the devices that are recording to a single codec?
Recording IssuesThis topic explains how to diagnose and resolve problems that occur with contact
recordings.
Calls for devices configured for Network Recording drop when you try to conference
or transfer a call.
Symptom. When you try to transfer or conference a call and one or more devices on
the call configured for network recording, the transfer or conference fails and
parties drop off of the call.
Cause. Cisco Unified CM does not support codec changes for devices that are
configured for call recording. The codec must remain the same throughout the life
of the call. For conference calls, the conference bridge must support the codec
used before the conference completes.
Solution. Update the Cisco Unified CM configuration to ensure that no codec
changes occur for network recorded devices.

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

Error with date field when inserting records into sql server from webdynpro

Dear SDN's,
I am trying to insert the records into sql server through my webDynpro program.
I have created a date field in a dictionary with the datatype date.
In my webdynpro program to insert the date i am following the below format.
String dateString = "2006/12/10";
java.util.Date d=new java.util.Date(dateString);
java.sql.Date date = new java.sql.Date(d.getTime());
int i=stmt.executeUpdate("INSERT INTO TRAVEL_HEADER(TRQID,PROJECTID,REQDT,ADVCE,ETADV,PURTR) values(21, '555-1212', '" + date + "', 5000, '20060501','hi')");
when i try to execute it, it gives the following error.
com.sap.sql.log.OpenSQLException: The SQL statement "INSERT INTO "TRAVEL_HEADER" ("TRQID","PROJECTID","REQDT","ADVCE","ETADV","PURTR") VALUES (21,'555-1212','2006-12-10',5000,'20060501','hi')" contains the semantics error[s]: - type check error: new value (element number 3 (CHAR)) is not assignable to column >>REQDT<< (DATE)
Please correct me.
Your help will be appreciated.
Regards,
Sireesha.B

Hi,
int i=stmt.executeUpdate("INSERT INTO TRAVEL_HEADER(TRQID,PROJECTID,REQDT,ADVCE,ETADV,PURTR) values(21, '555-1212', 'date', 5000, '20060501','hi')");
try like this.
I Think in SQL the general format to take date as input like this.
INSERT INTO X VALUES ('10/30/56')
thaks,
Lohi.

Calling a Web Server with HTTP POST to retrieve XML in chunks

Hi,
I have to call a Web Server with the HTPP POST method by providing the user id and password. I am getting the xml as output from the web server in chunks. This is possible through net.HTTPUrlConnection Java Api. But does any body knows how to implement this through OSB.
Regards,
Anuj Maheshwari

sample usage:
CALL FUNCTION 'HTTP_POST'
    EXPORTING
      ABSOLUTE_URI                = IM_OFX_CONTROL_DATA-ADDRESS
      REQUEST_ENTITY_BODY_LENGTH = RESPONSE_ENTITY_BODY_LENGTH
      RFC_DESTINATION             = IM_OFX_CONTROL_DATA-HTTP_RFCDEST
      USER                        = IM_OFX_CONTROL_DATA-HTTP_USER
      PASSWORD                    = IM_OFX_CONTROL_DATA-HTTP_PASSWORD
      BLANKSTOCRLF                = 'X'
    IMPORTING
      STATUS_CODE                 = STATUS
      STATUS_TEXT                 = STATUS_TEXT
      RESPONSE_ENTITY_BODY_LENGTH = RLENGTH
    TABLES
      REQUEST_ENTITY_BODY         = LT_REQUEST
      RESPONSE_ENTITY_BODY        = RESPONSE
      RESPONSE_HEADERS            = LT_RESPONSE_HEADERS
      REQUEST_HEADERS             = LT_HTTP_HEADERS
   EXCEPTIONS
        OTHERS                      = 1.
Refer the programs:
LFPIFF02
LOFXALSU04
LPRGN_URL_RESPONSEU01
LSBCCU01
LSFTPU09
for some idea.
regards,
ravi

Ask the Expert : Call Recording with Cisco Unified Communication Manager (UCM)

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Unified CM call recording solution that provides the ability to record customer conversations for compliance purpose. This topic will cover an overview, configuration and troubleshooting of the call recording feature.
Monday, January 19th, 2015 to Friday, January 30th, 2015
Harmit Singh is a technical leader with the High Touch Technical Services (HTTS) and Technical Assistance Center (TAC) Unified Communications teams based in Bangalore. He has broad experience in Cisco Unified Communications infrastructure solutions. He has 10 years of experience working with large enterprise and service provider networks. He also holds CCIE certifications (#20012) in Voice and Collaboration as well as Red Hat and VMware certifications.
Mohammed Noorulla Khan is a customer support engineer in High-Touch Technical Services (HTTS) Unified Communications teams based in Bangalore. His areas of expertise include Cisco Unified Communications Manager, Gateways, and Jabber. He has over 6 years of industry experience working with large enterprise and service provider networks. He also holds CCIE certifications (#35741) in Voice and VMware certifications.
** Remember to use the rating system to let Mohammed and Harmit know if you've received an adequate response. **
Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video community, subcommunity, IP Telephony, shortly after the event. This event lasts through January 30th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Hi Maheshwar,
Thank you for your query. Please find my response below:
1> Do we support recording with HCS environment and which 3rd party vendors are validated with HCS based call control 10.1.1?
Answer: Whether you use a standalone UCM cluster, UCCE or HCS, call recording would be supported across the board in the same manner.
Please refer to the following link:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/hcs-cc/10_0_1/Install_and_Config/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs_chapter_011.html#CHCS_RF_T1105284_00
Option
Notes
Recording
All Recording applications that are supported by Unified CCE are supported on HCS for CC. For details, see Recording section in Agent and Supervisor Capabilities.
With respect to which 3rd party vendors have been validated, marketplace.cisco.com is a good place to crosscheck this info. You will find a Cisco Compatible Logo against the partners listed there. The logo is used to signify that the PARTNER product has undergone technical interoperability testing with the Cisco product specified. The interoperability testing is conducted by a third party laboratory based on testing criteria set forth by Cisco. PARTNER is solely responsible for the support and warranty of its product. Placement of the PARTNER product or information pertaining thereto, on the Cisco Marketplace website does not constitute an offer to sell the PARTNER product in any way. For further information on the PARTNER products, please visit the PARTNER company website.
Please refer to the following link and use the search field under Collaboration Technology:
https://marketplace.cisco.com/catalog/search?utf8=%E2%9C%93&search[q]=&search[technology_category_ids]=23%2C24%2C197%2C1940%2C1941%2C1921%2C1576%2C1897%2C1983%2C2418%2C26%2C198%2C1904&search[order]=tier&per_page=20&_=1421663854257&ts=1421663855441
2> Which end points are supported for recording via HCS call control?
Answer: The following link should help clarify this:
http://solutionpartner.cisco.com/web/sip/wiki/-/wiki/Main/Unified+CM+Silent+Monitoring+Recording+Supported+Device+Matrix
Please let us know if you have any follow up questions. Hope this is helpful.
Regards,
Harmit Singh.

How works lync when I made a video conferences with someone in my same building?I want to understand how lyncs works, when I made video conferences with someone in my same building, if my call go to to server and then go to the person I´m calling. Or if L

I want to understand how lyncs works, when I made video conferences with someone in my same building, if my call go to to server and then go to the person I´m calling.
Or if Lync realizes that we are in the same building so it never leaves, so it don’t generate traffic. My concern is the bandwidth consumption.
Please a I need the information.
thanks

In addition, you can refer to the following link about the media connection in different scenarios:
http://www.shudnow.net/2010/12/06/lync-server-2010-port-ranges-and-audiomedia-negotiation/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support

How to pass record Group from Forms with DATA_PARAMETER to Reports Server

How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,
Arif

Hi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product.

On demand call recording on QM server with CUCM

Similar Messages

Maybe you are looking for