Campaign - attach document to generated activity

Hello,
I have a mkt campaign using a custom communication channel which uses the communication method 'generate contact (visit)' to create activities only. No email should be send.
This works, but I want to have an attachment automatically assigned to those activities as well? How can I achieve this?
Thanks for any hints how to customize that.
Kind regards,
Erik

Hello Gregor,
sorry, I have found the way to create the template on help.sap.com.
However, when I try to create an activity template, I cannot attach a document to it, as the tab Attachments is not available.
Unfortunately this seems to be standard, as the help.sap.com says the following
"The following tab pages do not appear during activity processing, because these functions are not possible for templates: ·Attachments"
Is there another possibility to have an Attachment on the generated Activities out of the Campaign?
Regards,
Erik

Similar Messages

Copy attached documents from network activity to purchase order

Has anyone ever tried copying attachments (e.g. MS Word documents) from an external activity in the project to the purchase requisition and purchase orders that are created from it?
Our client would like to attach detailed specs for the purchasing in the Project Builder. The specs will then be used by Purchasing when they request offers from vendors, and finally attach it to the PO when it is created.
Any ideas how this can be solved? Any best practices or recommendations?
We're working on 4.6C and don't use EBP.
Thanks in advance for the help!
Pim

Hi Pim,
If the same document should be used for more than 1 object, it is better to my opnion to use a link and not an attachement (in that way you are sure to have the same information, it is a golden rule never to have the same info twice). You have to think about where to put your documents. You could use for instance a file server. Other solutions supported by SAP are possible.
You could make use of an ABAP development to create the same link to the purchase requisition as to the activity (based on a user exit or use a workflow to trigger the creation of the link).
Regards,
Paul

Error while attaching document to report on Portal - Invalid selection valu

Hello All,
We are running our reports on Portal and as per the business requirement the users have to create comments or attach documents to certain amounts in certain columns and once they create the comment a document icon shows up near that amount (for example there are 3 columns Budget, actual, balance then the user have to create comment for some amounts which needs explanation) they do that from context menu Documents -> Create new Comment.
Now we want those documents to be saved on Infoprovider level and not on master data for any particular object. We have activated the flag "Characteristic is document property" on related infoobjects. We have the flag to display document icon on Infoprovider active in the web template. Now when I run the report I am able to create new comments on first two columns and when the report refreshes it shows me icon near that amount but it gives me errors on third column after the report refreshes itself. Now when I go in portal KM repository where documents are stored I do see the document that I created for the third column as well so looks like the document is getting created and being stored but the issue is when it tries to display the icon on that third column.
The error I get is this:
The initial exception that caused the request to fail was:
Invalid selection value: AttributeMember
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException: Invalid selection value: AttributeMember
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLowForced(ProviderRange.java:297)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLow(ProviderRange.java:291)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.set(ProviderRange.java:469)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.SingleMember.set(SingleMember.java:125)
at com.sap.ip.bi.km.common.assignment.AssignmentMember.isContained(AssignmentMember.java:192)
Please give some inputs if anyone is facing same problem or is anyone has worked previously with this kinda of stuff.
Thanks in advance.
Kiran

Hi!
Have you solved this problem? I have the same problem after a SPS implementation (SPS 17). The message appears when we select a single value in a DP (hierarchical filter item) that filters another one, but when I select a node it doesn't.
Before the patch implementation the apliccation worked ok.
Any idea?
Thanks in advance.
Jose

Loading attached documents from SAP R/3 system to BW/BI system

Dear Experts,
In SAP R/3 system, I created generic datasource to extract sales activities which are entered with transaction code VC01N. In SAP R/3 system, it is possible to attach documents (like word, Excel, pdf) to the sales activity. I need to upload these documents to SAP BW system as document to sales activity master data. I couldn't find where these attached documents are stored in SAP R/3 system. How can I find these documents?
If I find these documents, I will be able upload these to BW using "How to Mass Upload Documents to BW" document.
Thanks,
Ozgur Yavuzkara

Hi Girish,
I don't understand your question completely. Is your question related to the Internet Transaction Server? If it is a Web Dynpro question, I can move this thread to the Web Dynpro forum. What do you think?
- Henning

Help with exporting document and generating an enumerated value error

Can anyone help me figure out why I cannot get this script to export the document and save it for the web?
I keep getting the same frustrating "Enumerated Value expected".
here is the script thus far:
* attempting to create a script to insert names automatically within photoshop cs2. Similar to the PSP.
tag = app.activeDocument;
var lee = ["Barb","Belle","Betty","Carmel","Christy","Connie",
"Debbie","Debra","Denise","Diamond","Dolceluna","Irene","Jacqui"];
//determine if active layer is a text layer or not.
if(tag.isBackground == true){
alert("this is a background layer and cannot be changed.");
else{
alert("this is the name layer.")
for(i=0;i<lee.length;i++){
tag.activeLayer.textItem.contents = lee[i];
var options = new ExportOptionsSaveForWeb();
options.format = SaveDocumentType.PNG-24;
options.interlaced = false;
options.PNG8= false;
var fName = lee[i];
var newName = fName+'-'+tag.name+'.png';
alert(newName);
//EXPORT DOCUMENT KEEPS GENERATING ENUMBERATED VALUE EXPECTED
// web.matte = MatteType.NONE;
tag.exportDocument(File(tag.path + '/' + newName),ExportType.SAVEFORWEB,options);
} // closes for loop
}// end of else statement

Yes the guide is misleading. It says 'For this property, only COMPUSERVEGIF, JPEG, PNG-8, PNG-24, and BMP are supported.'
It really should say 'For this property, only COMPUSERVEGIF, JPEG, PNG, and BMP are supported.'
But if you look under SaveDocumentType you will not find PNG-8 or PNG-24 listed in the values.

In an outgoing email message the "attach" document icon does not work in firefox. It does work when using internet explorer. How can I get the "attach" key to work when using firefox?

Using firefox, if I am composing a new message in my hotmail account the "attachment" icon is not active, so nothing happens when I click on it in order to attach one of my word documents.
The "attachment" icon is active when I am using hotmail and internet explorer.

Firefox 3 will not run on OS X 10.3.9, it requires at least 10.4
Try one of these browsers to see if you can access Hotmail - [http://www.seamonkey-project.org/releases/seamonkey1.1.19/ SeaMonkey 1.1.19] or [http://caminobrowser.org/download/ Camino 1.6.11]

Attaching document in the Asset master data

Hi All,
If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this in SAP?
Also while doing asset transfer, how can we transfer the attached documents?
Please provide inputs.
Regards,
Jayasudha

Hi ,
Below is the configuration steps
Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
Â· Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
Â· Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
Procedure
Then if you check the service object in AS02 it will be in active status.
Regards,
Jayasudha

Accounting Document Not Generated for SD Billing

Hello SAP Champs,
Please let me know if you have any thoughts or solution for the below issue.
Background:
We have company code 3000 that was created three years back. In the month of November, 2007, we have activated Controlling in this company code. Now business is trying to cancel an Invoice that was posted prior to Controlling activation (for company code 3000).
The transaction used is VF11. The result is a cancellation document has been created in the system but no accounting document was generated. The error message is "Account XXXXX requires assignemnt to CO object".
However there is no issue with the account determination or account assignment setup. In fact all other Invoices(that were generated after controlling is made active), account assignment works just fine.
We are trying to see if there is any standard procedure or mechanism to resolve this issue.
Question - Can we manually create the accounting document for the cancelled invoice? I tried creating one(using FB01) but it was not recognized by the invoice and I'm not seeing it in the document flow. We have the same document number for Invoice and Accounting document. Please let me know if I'm missing anythiing here or is there a better way to resolve this.
Thank you in advance for your help. Points rewarded for sure.

You can map Sales Order number to either 'Assignment' or 'Reference' fields in accounting document using Copy control function in SD. Please use transaction VTFA, this needs to be maintained for combinations of billing type and sales document type. Please ensure these fields are not currently used in your system for other information.
Following fields can be mapped to 'Assignment' or 'Reference'.
A Purchase order number
B Sales order number
C Delivery number
D External delivery number
E Current billing document number
F External delivery no. if available, otherwise delivery no.
If you currently use 'Assignment' or 'Reference' fields for other details, you can use user exit EXIT_SAPLV60B_008.
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Oct 4, 2010 11:52 AM

After cancelling the billing document accounting document not generated

hi,
we released the billing and accounting document generated but customer needed changes in the billing values so we cancel the billing document but accounting document not generated(reversal accounting not happen)....in document flow it shows in cancel document in blocking state ....we try to release in VF02 but it throws the error "Client 200 does not contain an active application area" . but the other sales order we test in qulaity server the scenorio is working fine...............for specific one sales order creating problem now.....
try to solve the issue ..
Thanks
Muthuraman.D

Dear all,
I have noticed this problem in my company system.
Problem descripion:
- you creates an invoice and the system doesn't post it for any reason
- then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
--> user creates Cancel, Cancel is not posted as well.
--> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
--> standard VFX3 doesn't signal this kind of not posted documents situation.
Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
So the 2 ways must be:
1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI and in this case block the cancel creation, as instead standard SAP does.
Could you please give me an idea on how it would be better proceed?
Thank You very much.
Raffaella

Cannot attach documents at order operation level in PM order.

Hi,
We have recently upgraded to EHP6 and I have activated the EAM business functions including LOG_EAM_CI_6. In my PM work order, on the Additional Data tab, I can see the "Document Assignment" section at the bottom. Here I attach an existing document and choose Assign to Order. Then I attach another existing document and choose Assign to Operation (0010). After saving the order if I go back into it (IW32/IW33). the document assigned to order header is still there but the document attached to the operation disappears.
I have defined the document type that I am assigning at header level and operation level in Customizing for Cross-Application Components under Document Management --> Control Data --> Define Document Types. I have also specified in Customizing that the assignment to objects PMAUFK (order) and/or PMAFVC (operation) is allowed for the document type of those documents.
Can someone please advise what's wrong here ? I have to attach/assign docs to operations.
Thanks,
Sandy

Hi Sandy
Can you please make sure two things:
1) IMG --> DMS --> Control Data --> Define Document Types --> Select Doc Type ---> Define Object Links. It must be something similar to this one. Without entering CREATE DOCUMENT settings, you may not be allowed to attach a document. That might be causing the issue. If you do not want from within IW31, someone is creating documents then make sure this setting has value =2.
One more possible reason for this is 1:n field in this same setting. If 1:n is not selected, please read the help for that field and make sure the uniqueness of your document attachment to objects.
2) IMG --> DMS --> Control Data --> Maintain Screen for Object Link
For this one make sure that you have a screen entry for PMAUFK and PMAFVC.
Now if attachment does not work, try creating a document and let us know what is the error message.
And do you know that there is another way of attaching documents to the operation which is attaching them as PRT. Just select the operation, click on PRT button and select document and attach it.
I hope this will help.
Regards
Savas
Message was edited by: Savas Yazici

Attached document for data column in BPS Web application

Hi,
I have created layout for a BPS application, the layout has been configured to have the ability to allow the used to create the attached documentd for the data column. when the user open the layout through the planning profile, the icon for those documents is displayed and can be open by click those icons. After we generated the Web applicatios, those icons are gone and the user can not open them any more.
I notice that there is document subcomponent under BPS-WB, I added that subcomponent to my web layout, it still not work.Anybody know how to display the attached documents on the Web, Is this doable?

Hi Marc,
I did exactly what you mention in your responce e-mail, but it still not work coreectly.
following is my propperty configuration for layout and documents:
Planning layout (layout_lay01)
Only ready for output: True
Row/Cell Selection: Cell
Event on selection: true
Document on planning layout (Document1)
Layout: = layout_lay01
Only ready for output: false
When I launch the application through the Tcode BPS_WIF0
There is no document icon display for each data columns which can been in UPSPL. Instead there is a generic document input/display space under the lauout,however there is no any document display within the box, and I can not input anything within the document box. I changes some of the property for the layout and document, but it not work.
Did I forget some thing?

Send Email Attaching the Report generated in Program.

Hi All,
I am generating a report in list format with write statements.
My requirement is to send an email attaching this report as an attachment.
I wanted to know how to get the listobject of the report generated by my program from the memory. Can anyone guide me with this ?
It will be appreciable , If any one can give me more information on sending mails attaching the reports generated by the program.
Thanks in advance,
Mayank

Hi,
I think the problem is not clear.
My problem is to get the listobject name which got generated after the program run.I want to attach this list report to the email. I have seen a code from one of the link.
Here it is.
List of Users According to Logon Date and Password Change
NOTE: Create ALI/OTF Document in Spool
SUBMIT rsusr200 WITH valid = 'X'
                  WITH notvalid = space
                  WITH unlocked = 'X'
                  WITH locked = space
             EXPORTING LIST TO MEMORY AND RETURN.
<b>* Read list from memory into table
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject = lt_listobject
    EXCEPTIONS
      not_found = 1
      OTHERS     = 2.
IF sy-subrc <> 0.
Error in function module &1
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
       WITH 'LIST_FROM_MEMORY'.
ENDIF.</b>
Because listobject is of size RAW(1000)
and objbin is of size CHAR(255) we make this table copy
CALL FUNCTION 'TABLE_COMPRESS'
    TABLES
      in             = lt_listobject
      out            = lt_objbin
    EXCEPTIONS
      compress_error = 1
      OTHERS         = 2.
IF sy-subrc <> 0.
Error in function module &1
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
       WITH 'TABLE_COMPRESS'.
ENDIF.
Here the report is sumitted with the option of exporting the list in to the memory which is later read using 'LIST_FROM_MEMORY'.
But here i need the same report's output to be captured and want to read the list generated from memory into table.
How can i get the listobject of the list generated by the report in the same report program itself ??
Please let me know.
Mayank

How to attach documents for Webhelp

Hello All,
I am currently using Robohelp 7 and I am facing a problem how
to attach a word document as an object in Webhelp?
I am inserting an object of type Microsoft office Word
Document, when I compile and view output help, I cannot download
the attached document.
What i need exaxctly:
Link to download a file from the generated output help, i
don't need this document to be processed by Robohelp and converted
to topics, just a word document to download from the generated
help.

Hi Sherif Esmat and welcome to our community
See if the links below help in any way. They aren't for
RoboHelp 7 specifically, but the general ideas should be the same.
Link
One
Link
Two
Cheers... Rick

Attach document with method CREATE_WITH_FILE

Hello,
I want to attach a document of my harddisk to an activity. Therefor I want to use method CREATE_WITH_FILE. But what parameters do I need to give the method for attaching a document to an activity ?
Hope spmeone can help me !
Thanks and best regards
Gerd

Hi Gerd,
The parameters you need to fill for CREATE_WITH_FILE method of class CL_CRM_DOCUMENTS are,
FILE_NAME = 'path of your file'.
BUSINESS_OBJECT-INSTID = 'GUID of your activity'.
BUSINESS_OBJECT-TYPEID = 'BUS2000126'.
BUSINESS_OBJECT-CATID = 'BO'.
Followed by this method call CL_CRM_DOCUMENTS~RENAME_OBJECT since CREATE_WITH_FILE will attach your file to activity but the name will be of LOIO. so use method RENAME_OBJECT to rename the file in Activity.
parameters for RENAME_OBJECT method,
Structure IS_IO = 'Pass values of structure LOIO from CREATE_WITH_FILE method'.
IV_NAME = 'Name you require'.
Regards,
Karthik.

Automatical creation of activities with attached document

Hello,
I want to create activities with an attached document, but that should work automatically. I just have the bp-numbers for creating the new activities , and for attaching the documents, the documentname is equal the bp-number. Now I should now how to do this in crm ?
Are there some programms/bapis etc.
Thanks and best regards
Gerd

Hi
First configure Release Statergy such that All PR's generated from MRP should be converted into PO with out Release Procedure and Other manually generated PRs should be converted in to PO after Release Procedure only......( For that you have to create Doc.type as a one charecter....Table: CEBAN...Field: BSART and MRP generated PRs should have one document type and Other manually created PRs should have diff. Doc. type)
Then follow the below steps..
1)In Material Master,Purchasing view....you maintain Purchasing Group and Check Auto PO Check Box.
2)In Vendor Master,Purchasing Date view Maintain Purchasing group and check Auto PO Check Box..
3)Maintain Proper PIR with Valid Conditions
Then after creation of PR from MRP...assign source for the PRs IN ME57..
If you configure release Statergy such that PRs generated thro MRP need not under go Release procedure ....then go to T.Code: ME59 and convert all PRs in to PO...
In this way without having any user exit you can solve your problem...We are doing in this way only..
Reward if useful
Regards
S.Baskaran

Campaign - attach document to generated activity

Similar Messages

Maybe you are looking for