Can a default font be set in the titler?

I did a search for "default font" here and didn't find anything.
Is it possible to set a default font in the titler?
J. D.

Use a template.

Similar Messages

  • How can we default a Purchase Organisation in the PR generated through MRP

    Hi,
    How can we default a Purchase Organisation in the PR generated through MRP
    (This is a Auto generated PR when the MRP Run is taken)
    We take a MRP Run for CBP. After the MRP Run system Auto generates a PR. But this PR does not have the P.organisation mentioned in it. It has to be done manually.
    How can we Default the P.Organiastion in the PR.
    NS

    The Purchasing Organization is only filled in the Purchase Requisition
    when a source is assigned because it represents a source of supply.
    Please also refer to attached note 206684 for more information.
    When executing a MRP-run, it is checked first if there exists a quota
    arrangement, the source list is read after it and the purchasing
    organization is taken from the source list. But before filling
    the relevant field in the purchase requisition (EBAN-EKORG), the
    system checks if there exists a record in the source list which is
    RELEVANT TO MRP, which means that the parameter 'MRP' has to be set to
    '1'.
    So please ensure that MRP = 1 in ME01 for the existing records and start
    the next planning run with planning mode = 3 and check the results.

  • In the Date Picker, How can I default to select * dates if the user does ..

    In the Date Picker, How can I default to select * dates if the user does not select a date.
    Thanks,
    Doug

    Doug,
    Now lets say l want everythingCould you post some sample data and the output that you want to get..? It would be much easy to understand the requirements...
    When you mean everything, I am assuming you need all possible dates possible between date1 and date2.
    you can use... (from asktom.oracle.com).
      1  select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1
      2    from ALL_OBJECTS
      3    where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') -
      4*                     to_date('12-jan-2009','DD-MON-YYYY') +1 )
    sql> /
    TO_DATE('
    12-JAN-09
    13-JAN-09
    14-JAN-09
    15-JAN-09
    16-JAN-09
    17-JAN-09
    18-JAN-09
    19-JAN-09
    20-JAN-09
    9 rows selected.
    For your case, since you have date1 and date2...
    select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1
      from ALL_OBJECTS
      where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') -
                        to_date(:p12_date1,'DD-MON-YYYY') +1 )Should work.. in my opinion...Haven't tested the second one in Apex .
    Is this what you were looking for ..?? If not, please elaborate...
    Thanks,
    Rajesh.

  • When I charge the battery, the screen has a massage show" Not Enough Storage , This iPad cannot back up because there is not enough iCloud storage available. You can manage your storage in setting" but the problem is my iPad screen is freezed .

    When I charge the battery, the screen has a massage show" Not Enough Storage , This iPad cannot back up because there is not enough iCloud storage available. You can manage your storage in setting" but the problem is my iPad screen is freezed .I can do any thing about the setting, Can I change my iPad setting from my computer?

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.  You won't lose any data by doing this.

  • How to setup the defaults (font, fontsize, fontcolor) for the Content Editor in Acrobat Pro 11.0.4?

    Hi folks, maby you can tell me if there is a way to edit the default font of Acrobat's Content Editor, especial in the add text mode.
    As default, my Acrobat uses Minion Pro in size 12. This drives me crazy, because i have to change this every time i add Text.
    Thanks!

    Unfortunately there isn't but it would make an excellent Feature Request.

  • Can we pass temporary result set to the  procedure?

    Hi,
    The result set is stored in a temporary storage. Can we pass that resultset to the procedure?
    Thanks and regards
    Gowtham Sen.

    I'm still unclear just what this result set is... Is is a table or a cursor or something else?
    If you imply the physical result set of a SQL query, there is no such thing in Oracle. Oracle does not create and store a result set in memory containing the rows of the SQL SELECT. Creating such sets in memory does not scale. A single SELECT on such a database can kill the performance of the entire database by exhasuting all memory with a single large physical result set.
    Oracle "results" live in the database cache (residing in the SGA). Rows (as data blocks) are paged into and out of this case as demand dictates. When PL/SQL code, for example, fetches a row, the SQL engine grabs the row from the db cache (SGA) and copies it to the PGA (the private memory area of the PL/SQL process). The row also may not yet exist in the db cache - in which case it needs a physical read from disk to get the data block containing that row into the db cache (after which it is copied to the PGA).
    A PL/SQL process can do a bulk fetch - e.g. fetch a 100 rows from the SQL query/cursor at a time. In that case, a 100 rows are copied from the SGA db cache to the PGA.
    At no time is there are single large unique and dedicated memory struct in the SGA that contains the complete "result set" of a SQL query.
    Once you have fetched that row, that is it. Deal is done. You cannot reverse the cursor and fetch the row again. After you have fetched the last row in that cursor, you cannot pass that cursor to another process - the cursor is now empty. That other process cannot rewind the cursor and start fetching from the 1st row again. You will need to pass the SQL to that process in order for it to create its own cursor - also keeping in mind that in between the rows can have changed and that this other process could now see different results with its cursor.
    If you want to create such a physical temporary result set that is consistent and re-usable, you can use a temporary table - and insert the results of the SELECT into this temp table for further processing. This temp table is session specific and is auto destroyed when the session terminates.
    A comment though - it sounds like you're approaching the date warehouse processing (scrubbing, transformation and loading of data) as a row-by-row process.
    That is a flawed approach. Row-by-row processing does not scale. One should deal with data sets. Especially when the volumes are large. One should also attempt to perform minimal passes through a data set. Processing a bunch of rows, then passing that rows to another process to do some processing on the same rows.. this means multiple passes through the same data. That is very inefficient performance and resource wise.

  • Is there a way ? changing font / color in all the title lips at once.

    i am making intro titles..  but now that i have made all the title clips... i really feel i need to change the font style....  also the color .. ( color i can go to the color board after making it to a compound clip..) but to change the font for all the title clips at on go  ,,,, what do i do ???  
    I really feel this will be a useful and much demanded feature... i dont know if there is a way which already exists... do let me know.. thank you..
    regards,
    arun kanth

    You can make multiple selections of titles and make changes to parameters (like color, font, etc.) and have them apply to all selected titles at once. Use the Text inspector especially if you have varied titles -- it's easier.
    Be careful you don't make changes you don't really want to make (changing font and size can bash the formatting of specific types of titles, like lower thirds or some of the bugs.)
    If you run into the situation where a value does not appear, for example: you select several titles of all different font sizes, the size slider will look disabled. The slider might be disabled, but you can click and drag up or down on where the number should be to adjust "relative" sizes (you'll see something like +6 or -4, etc.)
    HTH

  • How can I create a general TOC using the titles of my books TOCS

    I have a document that includes the information of 6 different books, each one has its own TOC at the beginning of the chapter. The chapter title is only written as the title in the TOC. In the first book I want to create a general index that shows the 6 chapter names. I have tried to create a TOC, but it just appears blank. I think that's because I haven't written the titles, they were created in each chapter TOC by InDesign.  I really think there must be a way to create this general TOC but I just can't figure it out. Can you help me, please?

    Create every TOC with a title paragraph style which is not the same as the title styles in the text.
    Create a new document, assamble all documents in a book fille indb, create a new TOC which reads out the paragraph style of your TOC’s titles, include all book files in the definition of this TOC only.

  • How can I prevent Firefox from cutting off the title of a webpage for use as a file name when printing/saving as PDF if there's a / in it?

    Like it says in the question - when I try to print/save a webpage as a PDF, Firefox (version 36.0, Windows 8.1 64bit, German) usually uses the page's title as the file name. Slashes are, of course, not allowed in file names, but instead of just leaving leaving it out or replacing it with a hyphen, the title is cut off and everything before the last slash is gone, which in some cases results in very odd and misleading file names.
    Is this a known bug? I couldn't find anything. So I'm just wondering if there's either going to be a fix anytime soon, or whether there is a simpler solution than to generate a different title sans slashes specifically for Firefox users.
    Thanks in advance for Your help!

    There is more than one proxy type.<br />
    Only an anonymous proxy will hide the IP and build two connections, one between you and the proxy and a second connection between the proxy and the website that uses an IP from that proxy.<br />
    A normal proxy merely passes all traffic without affecting it, so websites see your IP in such a case.
    *http://en.wikipedia.org/wiki/Proxy_server

  • Can't create a RAID set using the Utilities window

    Hello! this seems so weird to me. I have 2 new LaCie 500GB drives. I'm working with ProTools (music production) and I need redundancy in terms of data safety, that's the reason for creating a mirrored RAID set. 500 GB should last me for awhile OK. Drives are brand new out of the box. They came formatted as FAT-32, got rid of that and erased and reformatted them as OS extended, journaled. They can be seen in system profiler. They mount and unmount OK. They can each accept and store files and I can retrieve files from them. But I can't join them to create a mirrored RAID set. In the disk utility window, I highlight the icon of either drive and try to drag it into the window but it won't drag. What's going on? I did this just fine with my earlier Lacie 200GB drives and an MBP, what's wrong here?
    I have a feeling I'm doing something really basic and really wrong but I can't see it!
    Anybody got any ideas? Thanks
    Rick

    It's subtle; I had the same problem and it took me a month to track it down.
    It's not enough to reformat your new drives, you also need to repartition them to either GUID Partition Table or Apple Partition Map. Look and I'll bet your drives, properly formated as HFS+ (Mac, Journaling) are still however showing Master Boot Record as their partition scheme -- you'll need to re-partition them.
    You need to use the "Options..." button when partitioning via the Disk Utility. You can choose whichever Map/Table is appropriate for your hardware from the window that opens.
    My scheme: copy the data to one, repartition the second, copy the data back onto the second one from the first one, repartition the first one, copy the data back onto the first one from the second, and you should be good to go in setting up your RAID.

  • Hi, I bought my Macbook in Nov 2008, Alumunium and now I am selling this to my friend how can i reset to factory setting without the CD

    How can i restore my macbook to the factory setting?? I am presenting it to my friend.

    since you are running mt lion on the mac you can boot to the recovery partition (restart holding down command+R keys)
    once booted there open the disk utility window and then on left side select the mac HD select the erase tab and make sure that next to format it says "mac OS extended journaled"
    click on the erase button
    once done close the disk utility window then click on the option to "install mac OS" and follow the prompts
    once the install is completed and the mac is restarted it will be like new and the setup assistant will open on startup

  • Anyway I can outline a font and not lose the various filtering applied to it?

    TIA!

    In ID CS3, you can apply an Effect like Bevel and Emboss to text. However, if you convert to outlines, you will loss the effect.
    You could use the export method, using a Transparency Flattner preset that converts fonts to outlines, while preserving the appearance of the effect.

  • Restoring the default font set

    I recently installed a large collection of fonts and have since noticed an incredible decrease in my system performance. So, I'm wondering if there's an easy way to get back to the default font installation set without having to completely restore my computer? I may or may not have a backup of the system before I installed all of the fonts, I've likely made a new backup since then. I'm using Linotype FontExplorer X to manage fonts and I'm worried that this app also has something to do with the font problems on my system. Could anyone shed light on what exactly FontExplorer does with my fonts that OS X wouldn't do by itself?
    Thanks!

    FontExplorer like most other font managers allow you to collect specific fonts into groups that can be activated or deactivated according to need. This helps reduce the OS load of having to handle all the fonts that are installed in the several fonts folders.
    For more on font management I suggest you visit the User Tips Library and read the tips on font management.

  • Setting the title font and axis labels in a graph created with the Report Generation Toolkit

    I'm using the LabVIEW Report Generation Toolkit for Microsoft Office to generate Excel worksheets containing plots. Unfortunately, the default font size used in the plots is huge (see attached worksheet). I was able to use Excel Set Graph Font.vi to reduce the size of the axis labels, but there does not appear to be a function to do this to the title and legend. In addition, there does not appear to be a function to set the axis text labels. Before I write my own, has NI released additional functions to perform these tasks?
    Thanks for your help,
    Zach Lerner
    Software Engineer
    OnWafer Technologies, Inc.
    Attachments:
    Test1_-_embedded_graph's_title_and_legend_font_is_huge.xls ‏14 KB

    Hello Zeidan
    The graph title and legend font sizes can be changed by accessing a low level VI (Excel_Insert_Chart.vi) that is part of the excelsub.llb that is located at (C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\addons\_office). This VI is called dynamically from within the Excel Insert Graph.vi and it uses VI server technology to access the Excel exposed properties. Attached to this post is an image of the block diagram of this VI after I have modified it to set the font sizes of the title and legend to 15. The circles in the image represent what I had to add to accomplish this.
    Best Regards,
    Ayman Kabire
    Attachments:
    Excel_Insert_Chart.JPG ‏99 KB

  • How to set a default font

    Hiya!
    I'm making a flyer in inDesign and i want to set a default font to run throughout the document whenever i create a text box. I also want the font size to be set at 10pt all the time. Does anyone know how to do this?
    Also - i have a template for the flyer which includes a border and table.... i want to be able to open this as a template for each flyer, which i can then fill in with information. Is this possible?
    Any pointers would be super appreciated.
    thanks

    Just deselect any item in the document you are working on and set your font and other variables in the font window/bar. Thats all. If you wish to set a standard font for all new document, than close all documents and set the things. This works for almost everything.

Maybe you are looking for