Can a excise invoice be created for a proforma invoice

Hi frenz,
For Intracompany stock transfer order a excise invoice has to be created.Here they raise a proforma invoice for a PO. Now they want to raise a Excise invoice(tcode: j1ib) for that Proforma invoice.
So is it possible to raise a Excise invoice for a proforma invoice? If so wat has to be done....
Regards,
vimal

Hi,
Excise Invoice is created based on Proforma Invoice or
Invoice (based on configuration, it can also be Delivery).
The Process Flow will be as under:
Process 1:
Sales Order (VA01 / VA02 / VA03) --> Delivery (VL10A / VL10C
/ VL01N / VL02N ? VL03N / VL04) --> PGI (VL02N) --> Proforma
Invoice (VF01 / VF02 / VF03) --> Excise Invoice (J1IIN)
Process 2:
Sales Order (VA01 / VA02 / VA03) --> Delivery (VL10A / VL10C
/ VL01N / VL02N ? VL03N / VL04) --> PGI (VL02N) --> Invoice
(VF01 / VF02 / VF03) --> Excise Invoice (J1IIN)
You can find more info this here.
[Link|http://www.allinterview.com/showanswers/57937.html]
regards
sadhu kishore

Similar Messages

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Can we delete the views created for a user in Oracle BPM J2EE WL

I am using Oracle BPM 10.3 MP2 Enterprise Edition
Version: 10.3.2
Build: #100486
Can we delete the views created for a user in workspace?
Usually we are using the filter option within workspace and then saving it as view.
Would like to know if we can delete such views and create again.
These views are user specifc
Thanks in Advance.
-Sree

I usually use this scripts to clean the workspace user custom seetings:
delete from fuego_objclassinst where fuego_objclassname = 'bea.albpm.workspace.layout';
delete from fuego_strprops where (fuego_category = 'fuego-view' OR fuego_category= 'fuego-presentations');
delete from fuego_strprops where (fuego_category = 'WAM' );
Hope this help.
Regards

Internal Excise Invoice is created for year 2009

Hi Masters
I ahve created a excise invoice for the GR document in the T code J1IEX. The posting date what we have given is in the fiscal year 2008.The excise invoice (concerned with excise dept.) is created fro the fiscal year 2008. But the internal excise invoice number is created for the fical year 2009.
What is the problem in my settings?Am I missing anything?
Regards
Mohanraj.C

Hi
This is not at all a problem, as this is the Internal no. it will take for fiscal year 2009, but Part II will generate for 2008 only. so no need to worry this is SAP standard.
Best regards
Vineet

Proforma invoice not created for stock transfer order

Hi Experts
while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
     Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number
          Item Number of the SD Document         000010
          Schedule Line Number                   0001
          Counter in Control Tables              00
          Message Identification                 00
          System Message Number                  001
          Output Type                            E
          Message Variable 01
          Message Variable 02
          Message Variable 03
          Message Variable 04
          Group Type                             F
No biliing documents generated
Please suggest.
Thanks

This explanation is not in detail and hence I am not clear about your configuration settings.
First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue. Try in development client.
thanks
G. Lakshmipathi

Idocs were not created for AP Intercompany Invoice... ???

Hi Gurus
We are dealing with Europe subsidiaries. X and Y are the comp codes. For the company code X , there are no I docs created for the AP Inter Company invoice from the Company code Y.
Program RSNAST00 and transaction BD87 are used in all other European subsidiaries for the automatic posting of the Inter company AP invoices for product.
By using the above information how can i generate the I docs in automatic posting of the inter company AP invoices.
Can any body guide me with the program changes or transaction next steps.. back ground of the issue with a solution ?
Your response is highly appreciated and awarded.
Thanks in Advance
Meenakshi

Any response in this regard.. ?

Proforma invoice is created for delivery without PGI in STO(Depot sales)

Dear Gurus,
I am facing a strange issue, user created Purchase order with some material X of 4 quantity, and he created the replenishment delivery for 1 quantity and without doing any Picking and PGI but system allowed to create proforma invoice with 4 quantity I checked the copy control config settings for Delivery and Proforma invoice all are maintained fine (viz., billing qty as D, copying req:311 and Data VBRK\VBRP:001)( Ichecked the change log for delivery but I didnt observed any chanes in delivery) .. strange to watch ........created the same scenario in quality but system doesnt allowed to create proforma invoice without PGI and picking(Just one month before quality is refreshed with Production).
If anyone faced the same problem let me konw the solution ate the earliest.
Best Regards,
Kishore.SGR

Hi
As already said, as per the standard the Performa Invoice do not check the Goods Issue status of a Delivery since it uses the Copying Requirement 009 in transaction VTFL.
If you want your performa invoice to be created only after the PGI of a delivery, then use the Requirement 003 in Copying Requirement field for the combination of your Delivery Doc. and Billing doc. in transaction VTFL at Header level.
Regards
Amitesh Anand

Invoice Not Created for STO

We have an STO between 2 plants where no invoice was ever created. GI posted, the GR posted, but now the GR cannot clear because there is no invoice.
Also, it does not show in WE02.
All other STO's work for us, it is just this combination of specific plants that is not working. Is there a setting we have missed setting up for an STO between these two plants?
Thanks very much!

Hi again Allie,
How fast
The truth is that I have some difficulties to understand your exact situation.
the GR posted, but now the GR cannot clear because there is no invoice.
Maybe it is a cultural difference, maybe because you are not using standard SAP terminology
Do you know that using tcode MB5T you can display intercompany stock in transit ?
Uncheck "stock transfer orders" and keep "cross-company-code" checked.
That will tell you the missing GR for incompany purchase orders.
Is that what you are looking for?
Best Regards,
Franck

Single Check created for two Vendor invoices via RFFOUS_C

Hi All
We run the program RFFOUS_C to generate check printing, our requirement is to print a single check for each invoice to a vendor. So if two invoices require payment, then two checks created.
The system generates two Check numbers which can be seen in F110. However when reviewing the file, only one check number is printed against both invoices.
Where else should I be looking for a setting that determines the check payments?
Regards
Gurprit

Hi,
In the vendor master, company code data, payment transaction tab, there is a setting for individual payment. If this is checked, a separate payment will be made for each invoice.
There may be other solutions but this one is very simple.
Hope this helps.
Alicia

Duplicate invoice lists created for same bill

Dear All,
Our system is generating multiple invoice lists for the same bill every time we do a VF21 on it...is this a standard functionality? How do we control it not to have multiple invoice list for the same bill i.e. if an invoice list is already created from one bill, it should error out the next time someone tries to create another invoice list with the same bill in the list?
Appreciate any advice.
Many thanks.

cancel mutiple issue in out put type
hope this solves the purpose
if wrong suggest me or reward me
sree

BUS2205 - Tolerances are not considered when 2nd Invoice is created for PO

Dear all,
I have the following problem with invoice in SRM7.0 and standalone scenario.
The following tolerances are set up: DA, DQ and PP
PO 1234
- P1   50 ST   1,06 EUR => 53 EUR
- P2   60 ST   0,50 EUR => 30 EUR
INV 3001
- P1 40 ST 1,50 EUR => 60 EUR
- P2 40 ST 0,75 EUR => 30 EUR
Posting this first invoice is fine. No messages nor exceptions.
Now I want to post a 2nd invoice with the following values/reference to the PO 1234:
INV 3002
- P1 10 ST   2,00 EUR => 20 EUR
- P2 10 ST 1,50 EUR => 15 EUR
According to the tolerance settings this should work there is enough value and quantity tolerance available. However I get the following errors:
BBP_IV, 103 'Für die Bestellung ... ist weder Position noch Limit zur Berechnung offen'
BBP_IV, 067 'Bestellung enthält keine zur Berchnung offenen Positionen'
/SAPSRM/PDO_INV, 221 'Aus Bestellung &1 konnte keine Position eingefügt werden'
The main error BBP_IV, 103 is triggered inside function BBP_IV_ASSIGNMENT.
Trying to change the message type from E to W doesn't work, because those messages are triggered in the corresponding PDO layer.
What I'm wondering is the fact that there is NO TOLERANCE check here it's a pure consideration of PO values and already existing GR and/or INV.
Does anyone of you have an idea for a suitable workaround?
Updating the invoice data with the outstanding PO values can be done in BBP_DOC_CHANGE_BADI. But how to get rid of the error messages of function BBP_IV_ASSIGNMENT (PDO layer)?
Kind regards,
Thomas
Edited by: Thomas Mueller on Mar 9, 2012 11:32 AM

Hi,
To address your problem, it is advisable to make the field as an incomplete item in the Sales Order before allowing the Sales Order to be saved.
Check the warning field in incomplete procedure for Sales Header and assign it to your document type. That is at least something you could do to "remind" the user and serve as a warning to them to input during order creation.
In standard, changing the PO number field in Billing creation is not possible - this is a referenced field from Order document.
Hope this helps.
Thanks.
Edited by: Kok Wai Phang on Oct 15, 2010 4:45 AM

Where can I see the logs created for manual tests.

HI,
I have configured these in mtm.exe.config file. But i don't see any temp folder created in C:\ to see my logs. I am running manual tests using MTM2013. I have only test professional installed with Visual studio Shell Integrated.
<system.diagnostics>
    <switches>
      
      
      <add name="UITestTraceLevel" value="0" />
      <add name="EqtTraceLevel" value="4" />
      <add name="TestManagement" value="4" />
      <add name="TeamBuild" value="4" />
      <add name="TeamFoundationSoapProxy" value="verbose" />
    </switches>
    <trace autoflush="true">
   <listeners>
   <add name="myListener" type="System.Diagnostics.TextWriterTraceListener" initializeData="C:\temp\MTM_Trace.log"   />
   </listeners>
   </trace>
</system.diagnostics>
Please suggest is there any thing else I need to configure
2.My second question is if i configure this, will i still be able tosee log results in the test runner?

Hi SriGuda,
About how to enable logs for MTM, please refer to:
# How to enable logs for MTM?
http://blogs.msdn.com/b/aseemb/archive/2012/11/15/how-to-enable-logs-for-mtm.aspx
If you want to get the recorded action log, you could check it in the attachment in test result. To enable action log, you need to check
Action Log option in test settings.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

Feature Request: production order after proforma invoice

Hello all,
we found out that a process often used in reality is not covered by SBO.
Given the case you have an article consisting of a BOM. A customer orders this article, you create a proforma invoice, the customer pays and then the article is produced and delivered to the customer.
In SBO you cannot create a production order based on an sales order, when a proforma invoice is created. The proforma invoice closes the sales order and production orders can only be based on open sales orders.
It should be possible to habe production orders based on proforma invoices or on closed sales orders to cover this scenario.
Thanks
Frank

In version 2007, you can create a Down Payment Invoice, which does not close the sales order.

Can we make Proforma invoice for STO Returns

Dear All,
Can we capture the STO return details in proforma invoice?
Thanks in advance.
Siva

Dear Ram,
When we create Proforma invoice, there wont be any postings to accounting documents. It is just an record to maintian.
So i dont think it is required to create an Proforma invoice during return delivery , Better u create return delivery STO with a tick mark.
Follow the same process.

Can a excise invoice be created for a proforma invoice

Similar Messages

Maybe you are looking for