Can a folder be approved?

Hi,
1. Probably an elementary question - can I approve a folder?
(so that before approval it will be hidden, and after approval - it'll be visible)
2. Can I approve all the folder's children with one action (like: "approve all") - so, if all of its child documents were In progress, they would all become approved.
Thanks
Ariel

Hi Ariel,
Folder has service permissions.If you have the permission Approver Administration or Full Control you can set the approval process for a folder.
See the link below:
http://help.sap.com/saphelp_ep60sp2/helpdata/en/04/9053ad76fd0948b4ec2abf97898a3e/frameset.htm
Regards,
Pooja.

Similar Messages

In approval workflow, can we have one action in which item can be review and approve/reject

Hello,
I have created approval workflow using SPD.
While sending notification to approver, we need to mention link for viewing : [%TaskProcess:Item Title%][%Variable:InternetLink%] and for approve/reject : [%current task: form_URN%]
So is it possible to have one link, where reviewer can review document and approve or reject it. he/she should not have to go again to mail and click on another link.
Thanking you in advance.
Regards,
Jayashri

hai
go for DispatchAction class and then pass as parameters
refer struts complete reference...
it will solve ur problems..

Can't access my pictures in phone i can see folder but too high on screen to tap

can't access my pictures in phone i can see folder but too high on screen to tap

fixed problem

Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted?

My daughter is running Adobe Reader 9.4.5 and Adobe Flash Player 10 Active X
on a Dell Dimension 4400 system with
Windows XP Home Edition version 2002 Service Pack 3.
During a full system backup using Seagate DiskWizard version 11.0.8326
each time folder C:\Windows\Cache\Adobe Reader 6
is accessed the pc freezes with the Blue Screen error
IRQL NOT LESS OR EQUAL ERROR 0x0000000A
(0x00000166, 0x00000002, 0x00000000, 0x804E5443).
Each time the Adobe Reader 6 folder is opened manually, the system presents a spinning
CD icon superimposed on the cursor and attempts to access the CD drive.
The access ultimately fails since there is no CD loaded because there is no intent to install
anything at the moment.
Through a manual process of backing up each of the the files in the Adobe Reader 6 folder
individually, one at a time, I strongly suspect the problem file to be instmsiw.exe.
Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted?
Are there any registry entries or issues that must be addressed before deleting these files?
What is the best way to free up space on the C drive that is apparently being occupied by
files left over from the install of a prior version of Adobe Reader?
The folder C:\Windows\Cache\Adobe Reader 6 contains the following files:
0x0409.ini                        5KB          Configuration Settings        2/18/2003
abcpy.ini                          2KB          Configuration Settings        3/24/2003
Adobe Reader 6.0.msi      2198KB     Windows Installer               5/19/2003
Data1.cab                       23334KB    WinZip file                         5/19/2003
instmsia.exe                   1669KB      Application                        3/11/2002
instmsiw.exe                  1780KB      Application                        3/11/2002
Rdr60ENU.itw                 16KB          ITW file                            5/11/2003
Rdr60ENU.mst               4KB            MST file                           4/16/2003
Setup.exe                      212KB        Application                        5/19/2003
Setup.ini                        2KB            Configuration Settings        5/19/2003
Thank you for any assistance you can provide.

Go to Add/Remove Programs in Control Panel and uninstall Adobe Reader 6. That version poses a security risk to your system and should be removed a.s.a.p.
After you remove it, reboot and then delete the "Adobe Reader 6" folder at the location you mentioned above.
Then go to http://get.adobe.com/reader/direct/ and download version 9.4
After that installs, download the latest patch for it by opening the program, then go to Help | Check For Updates.
As a precaution, download the free version of Malwarebytes from here: http://www.malwarebytes.org/products/malwarebytes_free and then run a full system scan.

If Time Recorder Enter Time Entry in SAP, Can It goes for approval on MSS ?

Hi WF Experts,
I would like to know, if Time Recorder Enter Time Entry in SAP for group of employees, can it goes for approval on MSS for individual approval ?
Would really appreciate your prompt response.
Regards,
Aashish

Hi Experts,
I got answer for it. I did it myself. It is possible.
Thanks.
Aashish

Can not find out Approve or Reject buttons in exchange 2013 approval

Hi all
I have created messages approval rule. when User1 sent message then Forward the message for approval to User2.
But when User2 login to OWA or MS outllook 2010 then User2 can not find out Approve
/ Reject buttons.
Please help me solve this problem
Thanks

Hi,
It is so strange. I noticed that the Approval Requested message was sent to two moderators: Administrator and TruongCM. Please confirm if the Approval button is missing in both moderator's Outlook.
Please close Outlook, then send a test email and receive it by using OWA or Outlook Online mode to check whether the issue persists. Also create a new Outlook profile to have a try.
Please update your Outlook 2010 with the latest patches and service packs.
Regards,
Winnie Liang
TechNet Community Support

Can add folder in movies for ipad

can add folder in movies for ipad mini

Not from Apple directly, but you can try Best Buy. They say that they'll accept non-US credit cards as long as the delivery address will be in the US.
http://www.bestbuy.com/site/Help-Topics/International-Orders/pcmcat204400050019. c?id=pcmcat204400050019
Regards.

Dv 9640 screen won't close ! can't fold it ! (emergency help)

hay guys,
my laptop screen won't close. I can't fold my laptop. i have to let my laptop open for all time. it;s terrible. i can't even chat with one of the hp technician. it keeps giving me error. I'm stuck. I have no idea how to repair it.
If you guys can help me .. there are some photos that can help you understand what's happening here !
it's hinge problem - outer case or inter case is the problem - i think
thanks - any advice will be helpfull. (sorry for bad english
thanks guys, it's kinda emergency for me !
Message Edited by Megh on 07-04-2009 07:25 AM
Message Edited by Megh on 07-04-2009 07:26 AM

half an hour later i found at the problem and fixed (temporarely) the problem.
one of the hinges is not working anymore, just like a car ball hinge.
to fix it:
1. unscrew the screen cover and then detach it from the screen (the screws are covered by some plastic or rubber protection)
2. unscrew the hinge and then pull it sideways until it breaks loose. I used some force, but tried to be careful. (picture 2 and three)
3. put the cover back on the screen.
4. either try to get a replacement hinge (the part number can be seen only partlally) or use the screen only with one hinge, which I did. When closing it or adjusting it, just be carefull to hold with the hand the side without a hinge. When fixed it stays there as before.

Approved invoices can not be edited - Approval process

Hi Experts -
I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it.
please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
10.07.2009 10:32 Description (English) by SRS Manian
     We have created approval procedure for all the invoices which are entered into the system., The
'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user.
When the Manager opens the invoice via Alert window - he/she wants to modify certain information
(lines as well as Sales person) and approve it.
The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at
all. All the information on the invoice are greyed out.
The system should allow the user 'Manager' to modify the information. Since the manager has full
authorization to the system.
10.07.2009 10:35 Info to Reporter by SAP
     Dear Partner/Customer,
We have received your inquiry and are currently processing it.
You will be contacted with a solution or an update as soon as possible.
For further details regarding the phase your message is in at the
moment please refer to:
http://service.sap.com/%7Esapidb/011000358700000575782007E
Kind regards,
SAP Business One Product Support
10.07.2009 10:59 Reply to Reporter by SAP
     Dear Manian,
Thank you for contacting us.
When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status.
When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document.
To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval.
I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator?
The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 11:59 Reply to Support Center by SRS Manian
     Thanks for the reply. The scenario is when the Manager receives the
document for approval, he wanted to edit and add it. Your reply (and
documentations) states that it needs to be rejected first before it is
available for editing. When it is gets rejected - the person who
orignated the document gets an alert and he can edit it. Here the
Manager must get an alert so that he can edit the Rejected document.
When the 'manager' rejects the document, and goes back to the alert
window to open the document - it is still greyed out !!
How does the 'manager' reject the document and edits it ?
regards
Manian
10.07.2009 12:11 Reply to Reporter by SAP
     Dear Manian,
If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'?
If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it.
Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document.
I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 12:28 Reply to Support Center by SRS Manian
     Hi:
The status of the document in the Header says 'Pending' and the status
below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian
10.07.2009 12:42 Call to Customer / Partner by SAP
     Performed on: 10.07.2009 10:41:59 (UK)
Contact person: SRS Manian
Status of discussion: Customer not reached
Subject:
Called the partner but currently engaged on another line.
Would like to hold a webex.
10.07.2009 12:42 Reply to Reporter by SAP
     Dear Manian,
I'm trying to call you but there was no response on your mobile.
When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d.
The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 18:11 Reply to Support Center by SRS Manian
     Hi:
Thanks for the reply - i tried this and found out the following:
1 - In the approval templates - we had mentioned number of approvals
required as '1'.
2 - in the number of approvers - we had mentioned two users
Though the template requires only one approvals (Either or OR) the system
expects both of them to approve or reject -
Can u please let me why is this behaving like this - or is this is the
way it is designed ? - if this is the way it is designed - i beleive it
is wrong - weneed to give a solution to the customer
regards
Manian
11.07.2009 05:52 Reply to Reporter by SAP
     Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision b ecause a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration
forum. You can find the forum in this link:
/community [original link is broken]
The forum is beingmoderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum. Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed.
Thank you for your understanding.
Best regards,
Lorna Real
Support Consultant
SAP Product Support for SAP Business One
SAP Ireland
11.07.2009 09:02 Reply to Support Center by SRS Manian
     Hi Thanks for the reply - however, the solution given doesnot address the
problem we are beingfaced with our client
Is there a Development Request we can raise so that this problem is
addressed in future
I am going ahead and confirming this Message though
regards
Manian
11.07.2009 10:04 Reply to Reporter by SAP
     Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken] This is from Note 1028874.
Unfortunately,we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874.
I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
SAP Notes
Number     Short text
0001035200
Issue can be solved via existing documentation
0001111431
Deleting rejected draft documents.
0001167635
Maintenance Policy (L)
0001321234
Status of a document rejected within the Approval Process.

Hi Gordon - thanks for the reply - i am sorry i never realized that the message i raised could be messed up like this - the following is a clear message with some paragraphs:
Hi Experts - I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it. please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
SRS Manian We have created approval procedure for all the invoices which are entered into the system., The 'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user. When the Manager opens the invoice via Alert window - he/she wants to modify certain information (lines as well as Sales person) and approve it. The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at all. All the information on the invoice are greyed out. The system should allow the user 'Manager' to modify the information. Since the manager has full authorization to the system.
Reply to Reporter by SAP Dear Manian,
Thank you for contacting us. When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status. When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document. To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval. I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator? The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference. Best regards, Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland 10.07.2009 11:59
Reply to Support Center by SRS Manian
Thanks for the reply.
The scenario is when the Manager receives the document for approval, he wanted to edit and add it. Your reply (and documentations) states that it needs to be rejected first before it is available for editing. When it is gets rejected - the person who orignated the document gets an alert and he can edit it. Here the Manager must get an alert so that he can edit the Rejected document. When the 'manager' rejects the document, and goes back to the alert window to open the document - it is still greyed out !! How does the 'manager' reject the document and edits it ? regards Manian
Reply to Reporter by SAP
Dear Manian, If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'? If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it. Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document. I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: The status of the document in the Header says 'Pending' and the status below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian 10.07.2009 12:42
Reply to Reporter by SAP
Dear Manian,
I'm trying to call you but there was no response on your mobile. When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d. The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: Thanks for the reply - i tried this and found out the following: 1 - In the approval templates - we had mentioned number of approvals required as '1'. 2 - in the number of approvers - we had mentioned two users Though the template requires only one approvals (Either or OR) the system expects both of them to approve or reject - Can u please let me why is this behaving like this - or is this is the way it is designed ? - if this is the way it is designed - i beleive it is wrong - weneed to give a solution to the customer
regards
Manian
Reply to Reporter by SAP
Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision because a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration forum.
You can find the forum in this link:
/community [original link is broken]
The forum is being moderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum.
Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed. Thank you for your understanding.
Best regards,
Lorna Real Support Consultant SAP Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi Thanks for the reply - however, the solution given does not address the problem we are being faced with our client Is there a Development Request we can raise so that this problem is addressed in future I am going ahead and confirming this Message though
regards
Manian
Reply to Reporter by SAP Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken]
This is from Note 1028874.
Unfortunately, we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874. I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland

When in mail, i would like to move emails to different folders other than the inbox, sent and trash can a folder be created?

When in mail i would like to move my emails to a different folder on mail account other than the inbox, sent and trash options, can i create a new folder?

The suggestion above is for MailBoxes on the Mac in the mail app and have nothing at all to do with the iPad. I think that you are asking about the iPad mail app.
You need to have an IMAP email account in order to create additional mailboxes on the iPad.
If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

TS3704 Trying to delete I Tunes because of missing MSVCR80.dll followed instructions from Apple to delete - Apple Mobile Device support keeps coming up its being used I have gone to program files deleted what I can from folder but left with 3 files

I have been getting the MSVCR80.dll missing message.
Been on the Apple site and following instruction.
Going down the list has instructed I have Deleted I Tunes.
Deleted Apple Software Update
But when I try to delete Apple Mobile device it wouldn't delete so went into program files has the instructions say by going to Program Files\common Files\Apple\Apple Mobile Device Support Folder.
It still wouldn't delete saying it was being used.
I opened the file and highlighted all the folders and pressed delete, most of them have disapeared into my recycle bin but the folder still holds AppleMobileService, AppleMobileDeviceService_main.dll and MobileDevice.dll.
Message when I right click the first file is AppleMobileService I am told this action can't be completed because file is open in Apple Mobile Device. Close and Try again.
When I click the next file AppleMobileDeviceService_main dll it says It comes up with This action cannot be completed and File description Apple Mobile Device Service. Company Apple Inc. File Version 17.323.0.9 Date Created 7/9/2013. Try again...... and finally MobileDevice.dll come up with same message but file version 710.0.0.4 Date Created 7/9/2013 Size 902KB Both say Try Again but the same thing just recurred.
I have left my lap top on hoping that I a swift reply.
I am certainly no computer wizard and simply trying to follow the instructions to get rid of the box which keep coming up everytime I switch the lap top on saying APS Daemon.exe-System Error. The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I had looked at the internet and there appears to be warnings not to click on the button.
I have had an apdate from Apple for the I Tunes but it wouldn't update. I thought that may have sorted it so whilst I had a few hours I thought I would go through the process that is advised on Apple's website.
I hope I have not ruined my computer. I haven't even tried deleting Bonjour or Apple Application Support (I Tunes 9 or later) has these are supposed to come after the step I am on.
Please HELP!!!!!

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

How do I format "icons", etc. so that I can replace folder with picture????

Hi,
Wonder if someone can help me. I already know how to go through the process, once the "picture" or "icon" or "clip-art" or clipart or ??? is ready to click on. Then get info, copy/paste, etc.
My question is when I look for categories of icons, etc. (preferably free) I can't seem to get the icons or pictures in a format that I can just click and do that most of the time. Sometimes it works, like I looked for bathroom pictures, and it gave me a few pictures to download. I downloaded a picture of a bathtub to my desktop and it worked where the folder changed to a bathtub.
What am I doing wrong? I would preferably like a lot of icons or avatars or whatever they are called for the Mac to choose from depending on a category and be able to click it and do this depending on the category I want. Or just google what picture I want. Ideally, I'd like a whole archive of little icons that are ready to replace the folder and look for them by category. I'm willing to buy a CD with lots if icons if necessary because I must be doing something wrong.
Thanks!
Trudi

Hi Trudijane
Welcome to the forum.
Not sure what this has to do with Pages'09 but…
Look here:
http://iconfactory.com/freeware
Go for the icons in the Apple logo, they are just stored on the folders, so you can copy and paste them on to whatever you want.
You can also get CandyBar there which lets you store, browse and apply the icons in one operation.
Peter

Managed Content Folder Pagelet: Can Sub-folder list be sorted?

Greetings,
It seems that even prefixing the names of folders with numbers cannot influence the random arrangement of folder names. Is it possible to sort these for Interaction Hub 9.1 ?
The image below is of a homepage pagelet that was generated with the Pagelet Wizard for the type 'Managed Content Folder.' Note that when viewed from the managed content 'Browse Folder' these sub-folders do appear in order 1 through 8.

Is the content of the pagelet a navigation collection?
I have seen that in a navigation collection we can specify the order using the 'Placement in Folder' drop down.
I am assuming these options should be similar for Interaction Hub 9.1 as well? Let us know if this was useful or if you are still running into issues. Thanks!

STS: Why manager can still send for approval?

Hi Folks,
Could you kindly help me on this matter ?
Why on the STS, I'm working on it now, the manager (the position is highest) stll can send for approval ? In my opinion, he should only be able to approve / reject.
If I check under that user ID, it has authorization for: R_STS_PT, R_STS_SUP, R_STS_CUST. Is it caused by this ?
Thanks a lot all

Hi Niel,
Refer to the consulting note 530285 and read all the conditions and points.
It will clarify your issue.
Regards,
Amit

Can MPEG folder be discarded after 'Build' has created Video_TS folder?

Hello, I am clearing things off my hard drive, and archiving. It appears that a video_TS file is self-sufficient file, and can be used at a later time to burn more DVDs. (I burn them in Toast.)
I am confused about the folder that is created when I import a Final Cut program into DVDSP-the MPEG-with PAR. I assume these are just compressed versions of the Final Cut program that become the video and audio assets to author the DVD. Once I do the 'Build' in DVDSP, can I dump the MPEG files? (I always make a high quality self-contained Quicktime movie in Final Cut of the program for archival reasons.)
Thanks very much, Bob

Thanks Eric, One more question about these MPEG folders. I don't seem to have any control as to where they come up. The last one that got created, came up in my Final Cut Projects folder, right with the FC video that was imported. Then I also discovered an single MPEG folder that contained files for many different projects. Is there a way to designate an exact folder where the MPEG will go, before I click 'Import' in DVDSP?
Thanks, Bob

Can a folder be approved?

Similar Messages

Maybe you are looking for