Can anyone provide the VI of current measurement for Agilent34901A channel21 and 22?

I want to measure the current by the Agilent34901A channel21 or 22. The HP34901A installed on the Agilent34970A is connected to the computer via GPIB Bus. Does anyone have the subvi for this measurement?

If you have the 34970A driver from NI, open HP34970A EZ Voltage.vi. On the diagram, the first string you'll see is "MEAS:VOLT:". Change this to "MEAS:CURR:". Save the modified VI as HP34970A EZ Current.vi. If you want, you can add this VI to HP34970A Single Point.vi just by adding an item to the "Function" slider and adding a new case.

Similar Messages

Can anyone provide the link to download Adobe Premier Elements as a trial version? Many thanks.

Can anyone provide the link to download Adobe Premier Elements as a trial version? Many thanks.

PE 13 Trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements
You can also download the trial version of the software thru the page linked below.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

"NOT solved" CO needs upgrading, can't provide the service I'm paying for.

For the record, I accepted the solution to my original post as advised by support, in an effort to be able to unlock the original post but it didn't work.
Please review the original post "CO needs upgrading, can't provide the service I'm paying for." for the beginning details of my issue.
Here's the update and final word from Verizon....
Worked on the issue in private support from 2/28/13 to 3/15/13. I was told my issue was submitted to the DSL escalation team & engineering group. I was told that it is a capacity issue at the CO, where upgrades are needed, so at the present time there is nothing more they can do until the upgrades are completed.
Needless to say, I'm not happy. Now I'm currently looking into compensation in the form of some type of reduction in my monthly fee until the issue is resolved at the CO and I'm able to get the speed I'm provisioned. Wish me luck this is my last option.
As I stated in my original post, I really have had a good relationship with Verizon up until now. Unfortunately, I'm not seeing a light at the end of the tunnel so I may have to make a change. I'll update this if anything changes

This is probably my final update...
I received a voice message in regards to my request for some compensation but there was nothing Verizon can do. The info given was that there was no estimated time for the upgrades to be completed. The offer was to down grade my plan to a lower provisioned speed & pay a lower rate. For both, it was not what I wanted to hear.
I wanted to keep my plan & provisioned speeds. I am & have been happy with my service & speed(when it's where it should be), it just that I'm not getting what I pay for at all times. Since there is no estimated time for upgrades (so that I get those provisioned speeds) I was inquiring about a possible adjustment in my monthly fees(maybe a few bucks off per month) until the upgrades are done. So now as I understand Verizons stance, I need to continue to pay the full price & Verizon won't be providing my provisioned speed. That just doesn't sound like a fair deal.
Unfortunately it appears that Verizon will now be loosing a long time customer, something I really wanted to avoid for the previously stated reasons. As I now look for an alternate ISP, I will continue to monitor my private support case in the hopes that something changes that will allow me to continue my relationship with Verizon as my ISP.
I want to thank everyone for their assistance in trying to resolve my issue, you have all been professional, courteous & helpful(as much as you could have been) in our communications, Kudos to all.

TS3274 I can't delete mail nor can i open the Settings. It opens for a sec and then closes. any ideas?

Mail closes when I attempt to read or delete messages
I can't open the Settings. It opens for a sec and then closes. any ideas

First try to reset your device by holding the home and power button for about 30 seconds until you see a silver apple, after that let go of the buttons and let your device start up normally. This will not remove any settings or information from your device.

How can I get the apps that I paid for on iTunes and the app store I don't have a computer I paid for them using my ipad and everytime I try to redownload them it asks for my card number and when I put the number in it tells me that the number is not a wo

Ok can anyone tell how I can get the apps that I paid for on iTunes and the app store using my I pad because I don't have a computer and when I try to redownload the apps it keeps asking me for my card number and when I give it my card info it says that it's an invalid number when I know that it's not

If you are getting an 'invalid security code' message then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

Can anyone provide the javascript code for a master form

I like to know how I can set up a master form on acrobat standard? My issue is that I would like, as I fill the master form, to be able to have the rest of the forms fill in automatically. Please help me with this issue!
Thanks,
Raul

Take a look at http://www.jotform.com. You can create as many forms as you like here for free and they don't contain advertising.
You could also try Google docs, so go to http://www.google.com and log into your account or create one and then go to settings and the docs section. It is free an you can create as many forms as you like and there isn't really any advertising to speak of.
Other than this, it is easy to create your own form using html.
If you are publishing to MobileMe, then you can do it, but you need to enter <Form action Mailto:, so all the info opens in the clients e-mail and is e-mailed directly to you.
If you are using an external server such as GoDaddy, then you can use form mail and enable this on your server, so the result is e-mailed to you.

Can anyone compile the Louis braille print app for 10.9?

"Louis" is a free Mac based braille app that translates text files to a "braille.brl" suitable for output to a braille printer. My wife has a version (1.4) running under an older copy of OS/X, but in 10.9/10.8 the ".brl" output file does not seem to be generated. The source code is supposedly downloadable from http://www.cucat.org/projects/louis/ .
I'm an old ****, and my background is in Fortran 66, C, C++ and a tiny tiny bit of Windows. I have Xcode, but have not sat down to play with it as yet. While I intend to get into it, it would take me a fair bit of time to learn the ins and outs. I hate to put my wife in a "holding pattern" since she currently uses Louis quite a bit.
If anyone could take a peek and give me an idea as to whether they could try to recompile and generate a workable executable for 10.9 I would appreciate the feedback There may be reasons I have not found a more recent recompile of this source, so any input would be appreciated.
<Email Edited by Host>

Program generates a file ( braille.brl by default) that is then output to the braille printer. Under 10.9 that file is not even initially created it would appear. I know that the actual text to braille library is open source with current version available (at http://www.liblouis.org). I have touched base with the original developer, but he is tied up with work/ life etc so he can't jump on this right away at this time. I think this might be something he did 7-8 yrs ago in younger less pressing days.
It runs runs fine under 10.6.8. It was originally downloaded as a precompiled program. It uses the Apple UI.
Here is is a link to a screen video of the app and it's problem
https://dl.dropboxusercontent.com/u/26279335/record.mov

Can anyone suggest the best external hard drive for MAC PRO?

As my tower is whirring like the proverbial jet, I was told at the Genius Bar to back everything up before trouble-shooting. I've researched various 500 GB ext. hard drives, but they all seem to have drawbacks. My biggest priority is reliability. Any ideas? Thanks.

You will find suitable products at MacSales.com or you can purchase a hard drive separately and install it in an external Firewire enclosure. You will find enclosures at:
MacSales.com
CoolDrives.com
FirewireDirect.com
NewEgg.com
In the future please choose the proper forum for your topic. You posted this question in the MacBook Pro forum instead of the Mac Pro forum.

CO needs upgrading, can't provide the service I'm paying for.

After 19 days of working through my problem, up to the "escelated DSL trouble" division, I found out that my CO is in need of "equipment upgrades" as told to me by the technician.
The short story... I'm provisioned for 3.1 to 7 Mbps, from 18:00 to 01:00 I only get around 1 Mbps. I went through all levels of CS, a technician came out & then on to the CO directly. I was told there is nothing more that can be done until Verizon upgrades the CO equipment. All contacts with verizon were professional, on both sides no complaints, everyone seemed genuine & helpful...as much as they could.
My question to the community/Verizon is how do I escalate this further?
I'm a long time customer that has had a good relationship with Verizon so far. With this issue I may need to look for an alternate for internet access, which I really don't want to do, but if there is no "light at the end of the tunnel" they are leaving me no choice.
Any assistance/comments are greatly appreciated.
This post has been resolved in a private support area and has been solved!
Go to Solution.

Sorry for the frustration. We will send this over to see what we can do in regards to the compensation.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Can anyone recommend the best type of case for the...

as its a touch screen i think its a must

Hold one, finding it again but you can also look for the: Nokia CP-323.
Just tried the link and it is dead. Weird. It is a Nokia site....
This is weird. Nokia can not navigate within their own site. Pitiful..... Anyway do a search for the case. It is there.
Message Edited by sapporobaby on 20-Jul-2009 11:44 PM
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Can anyone spot the error in this script for iTunes?

This AppleScript is designed to copy the Name and Artist of an iTunes track, then populate the Album Artist field with both, separated with an oblique. But when I run the script in iTunes, it only pastes the Artist name in to the Album Artist field and not the whole string.
tell application "iTunes"
if selection is not {} then -- if tracks are selected...
set sel to selection
set numTracks to (length of sel)
set s to "s"
if numTracks is 1 then set s to ""
display dialog "Adds the name of the track and the name of the artist to the Album Artist field." & return & return & (numTracks & " track" & s & " selected.") buttons {"Cancel", "Continue"} default button 2 with title "Create Album Artist" giving up after 30
if gave up of result is true then return
repeat with t from 1 to numTracks
tell contents of item t of sel
set {album artist} to ({get artist} & " / " & {get name})
end tell
end repeat
else
display dialog "No tracks have been selected." buttons {"Cancel"} default button 1 with icon 0 giving up after 30
end if -- no selection
end tell

Hello
Try -
tell item t of sel
set album artist to (get artist) & " / " & (get name)
end tell
instead of -
tell contents of item t of sel
set {album artist} to ({get artist} & " / " & {get name})
end tell
In your original code, the left and right value of assignment are both list, i.e. -
left value = {album artist}
right value = {get artist, "/", get name}
Consequently 'album artist' is assigned to the 1st item of the list at right, which is the result of 'get artist'.
In order to avoid this, don't use list assingment, which is not necessary at all here.
Also, I think you may just tell item t of sel, not contents of item t of sel.
Hope this may help,
H

Can I use the same external hard drive for time machine and storing other files

I have a 640GB external hard drive that I have been using for over a year for time machine backups. My mac hard drive is now starting to fill up and I am looking to move audio, video and picture files to my external hard drive. How do I do this without messing up my time machine backups? Can I do both on the same external hard drive? Do I just make new folders on the external hard drive to move the files I want? Thanks for the help.

If you move the files you will need to get another disk to back the files up to. You don't want to have only one copy of certain files (personal, professional etc.).

Can anybody Provide the Docs/Ppts for Business content

Hi
Can anyone Provide the Docs/Ppts for Businesscontent.
to my id [email protected].
Thanks in Advance
Chaitanya

Hi,
Refer SAP Help for Buss Content
http://help.sap.com/saphelp_bw31/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm.

Where can I get the Text to Speech utility for Captivate 4?

I looked all over the Adobe site. Where can I find the text to Speech utility for Captivate 4 and the voices that go with it. A URL to the download site would be perfect.

It has been discuss a few posts down to your recently, as indicated correctly by Micheal.
http://forums.adobe.com/thread/944601?tstart=0
Thanks,
Anjaneai

I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can anyone provide the VI of current measurement for Agilent34901A channel21 and 22?

Similar Messages

Maybe you are looking for