Can background sound be paused, then continue?

Hi All,
I was wondering if there is a way to have the background
sound stop playing in frames, say, 20 thru 40, then continue?
Any advice / bits of code is much appreciated! Couldn't find
such a trick anywhere.
Thanks,
VL

At frame 20 get the position of the sound and put it in a
variable before
stopping it:
var curPos = mySound.position / 1000; //convert to seconds
mySound.stop();
at frame 40, start the sound from the curPos variable:
mySound.start(curPos);
HTH
Dave -
Adobe Community Expert
www.blurredistinction.com
www.macromedia.com/support/forums/team_macromedia/

Similar Messages

  • I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

    I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

  • Jukebox 3 pauses then continues every few minu

    A Jukebox 3 that I've had for several years is suddenly getting cranky. During playback, about every fi've minutes it stops playing for anywhere from a half to .5 seconds, then continues. It doesn't lose track of position or skip to the next song, it just stops briefly. I'm wondering whether to suspect a disk problem or a controller problem. If it's a disk, I could just buy a new one, reformat, etc. If it's a controller problem then I'm probably out of luck (except for buying another on EBay). Any suggestions?

    All I can suggest is you run through this list of tests and fixes until you hit paydirt.
    ..Step by Step to fix your Mac
    Don't forget to backup first, it might be a dying machine or hard drive.
    Most commonly used backup methods
    If it does die here are your options
    My computer is not working, is my personal data lost?

  • Videos and music pausing then continue playing

    Hi, I really need some kind peoples feedback on this - I've tried eveything I can think of.
    My 80gb 5.5 gen iPod video is playing up.
    When I play a video movie I get a slight pause, for about 2 seconds in the flow of the movie.
    This happens around every 10 mins of playing. My movies are ripped via handbrake.
    Also the pause appears with music tracks as well, around the 7th track played in an album. It happens with all albums - they all paly fine on my shuffle and iPod touch.
    I have tried formatting he iPod via disk utility and restored the iPod using iTunes.
    The iPod is using firmware 1.3 I am now wonderng whether I should downgrade to a lower firmware or even trying a firmware from a 3rd party company.
    I have also cleared all artwork off the song tracks and converted them all to 123 aac as well.
    Please let me know if any of you guys have experienced this problem.
    Thanks

    Prior to vacation, i had about half the iPad (64GB) loaded with videos and music. I left all of that on the iPad, and added even more. I synced it, checked in itunes that the iPad drop down lists were showing my vids and music, and then went on vacation. I never checked that the videos actually played after the sync. I never thought that would be necessary after seeing them in iTunes. Especially since the majority of them were ones that were remaining on my ipad and have always worked fine.
    So the problem is that my iPad memory is full, the files definitely synced over, but the ipad is not recognizing them as videos and music. It lists zero ids, zero songs. Oddly, my photos, which i didn't touch, are working perfectly.
    I'm confident that i could fix this by endlessly syncing when i get back home, however that 12 hour flight home would be a lot more entertaining if i could get this working without my computer

  • Import Problems: Video Pauses, then continues

    I have used FCI for almost 2 years and never had any problems importing. Now, when I try to import, the footage randomly pauses on import, then a few seconds later picks back up again. As a result, the imported video has lots of still moments. All of the equipment has worked before.
    The problem exists on both a MiniDV and D8 camera/tape.
    I have tried importing both to Macintosh HD and to a LaCie HD.
    I have tried pass-through conversion, to remove any digital tape errors.
    I have used a GL2 as well.
    This is driving me mad! Any ideas?

    I have recently upgraded the OS to 10.4.10. I can't remember when 10.4.9 came out, but I don't think I imported on this machine with it.
    How do I revert to 10.4.8?
    Given all the variables I have tried (2 computers - one G4 & one Intel, 2 Firewire cables, 2 internal HDs and 1 external, 2 MiniDV cams and one Digital8 cam, digital and analog pass-through import, tapes from multiple projects) it seems that you may be right. The only thing I have been able to find in common here is the Firewire element.
    Any other ideas? How do I revert?

  • How can I remove the background sound from the headphone jack for my MacBoo

    for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
    Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
    At first thought that the headphone jack (3.5 mm Headphone:
    Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
    When I added iPhonu3GS playing - the background sound were not, then everything is OK!
    How can I remove the background sound from the headphone jack for my MacBook Air 13?

    There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    http://support.apple.com/kb/HT2526?viewlocale=en_US 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

  • New Problem - video loads, plays a bit, pauses, then plays without sound.

    On the first time that I used the TV-Out feature of the iPod, videos that normally were playing properly started to lag. The video would play about 15 seconds, then stop playing for a few seconds, then start again, but without sound. I just thought it might be because of the TV-Out feature, but after that incident, a large amount of my videos have been doing this, without using the TV-Out.
    My first use of the tv-out feature was around the time that I first updated the iPod firmware. I now realise that I have no need of the updated firmware, so would be willing to restore the iPod to factory settings, but would rather get some opinions first.
    Although these videos had played normally before, now they (and most all videos I have added since), do this when playing:
    Load up normally, play normally for about 15 seconds, pause and do nothing, then continue playing but without sound. If I use the clickwheel to skip ahead after it pauses, it will play normally for another 5 seconds or so and then pause and cut the sound again.
    I had not experienced anything like this before that first time I used the TV-out capability. Nor had I experienced it before updating the iPod. Now, many, but not all of my videos are doing this.
    Oh, it seems only the videos longer than 10 minutes are doing this... all the others work... some more testing would be needed to be certain. Video podcasts are playing fine. So... anyone else had this happen?

    This problem seems to occur for the 60GB models that are using the new firmware 1.1. It has been posted all over google and the only fix to this problem is to downgrade to 1.0. The problem is reported as not to affect the 30GB models but there are a few videos on my ipod (30GB) that suffer from this as well. I haven't downgraded by 30GB one to check if it fixes it, but I can assure you that it will fix the problem for the 60GB one (I used to have that one before).

  • I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me?

    I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?

    Hey there Srkupo,
    It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/ts2634
    Update your software
    Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
    If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
    Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • PS CC - I have a B/W background which I flattened - Then, change to RGB and add an RGB color graphic - print out makes background a greenish color - Can't figure out how to adjust.

    PS CC - I have a B/W background which I flattened - Then, change to RGB and add an RGB color graphic - print out makes background a greenish color - Can't figure out how to adjust.
    Thanks,
    Dave

    If the grayscale looks ok on screen, you are probably not setting up your print correctly. What OS? What printer?

  • I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ? or can you run both versions on OS10.9.5 ?

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ?
    thanks,

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • TS1702 ea game codes opo-up when redeeming "Before you can make purchases, you must tap Continue to sign in, then verify your payment info"

    Hi there,
    Not an urgent question, however I would like some help.
    EA Games ran a great promotion over the holidays that offered free iphone/ipod and ipad games. I won a few but have not been able to access the games due a weird bug. Everytime I attempt to redeem the code on my iphone in the app store or via Itunes app a pop-up appears "before you can make purchases, you must tap Continue to sign in, then verify your payment info." I'd happily click the continue button if there was one. But there isn't. I click on for the pop-up to move on and I'm back at the screen that asks me to redeem. Which I do and the pop-up returns. I'm fully logged in my payment method works for other app purchases or updates but not these EA codes. Very odd.

    There are user-to-user public forums, you're not talking to iTunes Support - I've asked the hosts to remove your account id and password from your post, but you should change your password IMMEDIATELY.
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can I pause and continue tests execution?

    Hello dev team,
    Thank you for the greate tool for running Flex tests. It is very very helpful for me and saved a lot of time. And I'm waiting for new releases.
    I wonder how can I pause/restart/continue running tests.
    Thanks in advance.
    Alexey

    Welcome to Apple Support Communities
    Simply press the icon of the app you are downloading, and its name will change to Paused. To resume it, press the icon of the app again

  • Hi,each time i`m trying to update any program in my phone i got this messege(before you can make purchases you must tap continue to sign in,then u must verifty your payment information),and i wanna it for free,what i have to do please?

    hi,each time i`m trying to update any program in my phone i got this messege(before you can make purchases you must tap continue to sign in,then u must verifty your payment information),and i wanna it for free,what i have to do please?

    There are user-to-user public forums, you're not talking to iTunes Support - I've asked the hosts to remove your account id and password from your post, but you should change your password IMMEDIATELY.
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • CAN I USE A SONG AS A BACKGROUND SOUND ON MY WEBPAGE FROM PURCHASED ALBUM IN ITUNES ?

    Can I use legally a part of the song from purchased album in iTunes , as a background sound on my own website home page ?

    No. This would be a breach of copyright and if detected would lay you open to legal action should the copyright owner feel litigious.

Maybe you are looking for