Can CUBE register with two CUCM clusters?

We have two CUCM clusters - one is in US and one is in Australia. Currently CUBE is registered with US Cluster with the settings below -
sccp local GigabitEthernet0/0
sccp ccm 10.10.1.21 identifier 2 priority 2 version 7.0
sccp ccm 10.10.1.20 identifier 1 priority 1 version 7.0
sccp
Now we need CUBE to communicate with Australia CUCM. Should we set sccp up for Australia CUCM cluster (version 6.0)?
Thanks,
Jessica Wang

I think you are refering to registering media termination points / transcoders on the same router to two different CUCM clusters, correct?
If yes, we can do it by creating separate sccp ccm groups.
Example :
sccp ccm identifier 1 version 7.0
sccp ccm identifier 2 version 7.0
sccp ccm identifier 3 version 7.0
sccp ccm identifier 4 version 7.0
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 1 register Transcoder1
sccp ccm group 2
associate ccm 3 priority 1
associate ccm 4 priority 2
associate profile 2 register Transcoder2
dspfarm profile 1 transcode 
codec g729r8
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 5
associate application SCCP
dspfarm profile 2 transcode 
codec g729r8
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 5
associate application SCCP
Arun

Similar Messages

  • How many devices can you register with a personal dev account

    can anyone tell me how many udids can i register with a personal account as i have a team of testers i would like to add , would i need a company dev account for this thanks or will my personal one be ok for this

    Still the same. Maximum 100 per year for testing. Individual Developer Account, person or company.
    Enterprise Account is for distribution to employees, not via the App Store.

  • Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    It is not possible to do that.
    Allan

  • I got a new computer and now iTunes is telling me it can't sync with two computers

    I got a new computer and now iTunes is telling me it can't sync with two computers, it's telling me it will erase what's on my iPad and re-sync. Will I lose my iPad data that's on it?

    No - not at all. Look at that one app that I gave you the link for. That is supposed to transfer all of the iPad content to the new computer. I have no idea how much it costs, but it's worth a look. There are other out there as well. Google "apps to transfer iPad content to computer" or something to that effect. These apps claim to transfer everything.
    Several things to remember - you can still transfer all of the iTunesicon tent that you purchased by using the Transfer Purchases option in iTunes. Just remember to turn off auto syncing before you do it. You will also have to authorize your new computer to transfer the purchase if you haven't done so already. From the iTunes menu on your computer go to Store> Authorize this computer.
    Plus any apps or music that you have bought can be downloaded again at no charge with the cloud feature in the latest iPad iOS.
    EDIT - I see that you did transfer the purchases. Look at one of those apps that I described and they should be able to get you set up. You should also invest in an external hardrive for backing up all of your computer content ... don't want this to happen again!
    Message was edited by: Demo

  • Demantra - can it run with two Data Models in parallel?

    Hello,
    we face the following situation: we have items that have to planned on a daily basis; many other items, however, only need weekly planning.
    Demantra only allows one base time unit in its data model. If we choose "daily" for all products, the system size will increase enormously.
    If we choose "weekly" for all products, we can not plan our daily products for specific days in the week.
    The idea is now to set up a Demantra System with two data models in parallel. Is this possible? Would they reside in different databases or database users?
    The Business Modeller allows to create new models, but can they run in parallel? If they can, how would the user access the different data models?
    Thanks for any hints on this! 

    Can you please elaborate on this issue?
    Thanks

  • I can't comunicate with two fieldpoint chains from one pc

    I have two separate labview programs which use different serial ports (com8 & com9) to communicate with two separate sets of fieldpoint hardware. Each works fine on it's own. When I run both from the same PC, the second to start always receives a 'Can't bind to com port' error from the FP create tag.vi. Both programs are using different .iak files which only reference their own com port.

    The FieldPoint Server, which is launched wheen you run the FP Open.vi can only have on instance running in memory. You can not have multiple servers running simultaneously, which is what your programs are attempting to do. Merge both IAK's into a single IAK that each program will access. Each Comm Resource (one for Com8 and one for Com 9) should be given a unique name.
    Regards,
    Aaron

  • Wether can invoice have with two different VAT rates, 16%

    Dear SDN team,
    I have a requirement like a invoice should have two different VAT rates.
    Situation is below:
    A rebate agreement is created and it was settled partially and final settlement is also carried out.
    Rebate agreement nº  XXXXXXXX, with a validity period between the 01.05.2010 until 31.07.2010. This rebate agreement created the credit memo XXXXXXXXX with the VAT rate of 18%.
    Mean time the VAT rate was changed from 1st July from 16% to 18%.
    There are invoice created in the first half and others belonging to the second half.  Invoice created during the First Half it was created the VAT value with 16% (Before July)and the Invoice created with the Second Half it was created with 18% (After July1st).
    But customer request is to have an invoice with two different VAT rates, 16% and 18%. However, the invoice only takes into account the 18%.
    And i have suggested the below resolution - But user still needs to have two different VAT rates in one invoice for the line item this is for the have a legal precept which force me to have a different VAT rates depending on the original invoice date
    Please let me advice how to resolve this issue.
    Looking forward for your favorable reply.
    Thanks and Regards,
    Jana
    Suggested Solution:
    But having two different VAT rates in one single invoice or credit note is not possible at all.
    Further if you would liked to have different VAT rates for the two separate ivoices - This can be done by doing the Rebate agreement with partial settlement for the First half that is before 30.06.2010 and final settlement after 01.07.2010. By doing this rebate agreement will have two different invoices created with two different VAT rates.  But now this is not possible for the RA where it is done with final settlement.
    So, You can not have two different VAT rate in one single invoice.

    Dear,
    In order to solve this issue with wrong VAt rates I propose you to proceed as follow:
    1) Cancel the CN (Credit Note)
    2) In the CMR (Credit Memo Request) set the tax classification of the materials with wrong VAT % to 0 (inside the CMR in item-billing document).
    3) Maintain for the access sequence of MWST a higher access than the normal one for tax classification 0 with the old tax percentage (E.g.: 16% in your case)
    4) Determine a new pricing for the CMR (via menu path: Edit > New pricing document)
    At this stage your items will have some 18% and some 16% of VAT. When you create the CN those percentages will be kept.
    If you are satisfied with the result it is now a matter of making sure the program that prints your invoice is mentioning the different VAT rates of the items. As you didn't specify anything about this point, I seize the opportunity to advice you about. No matter of the type of print program you are using (SAP script, PDF or Smartforms), you need TO BE SURE that when the CN is created (with two different types of VAT %) also your PRINTOUT is properly created mentioning the two different rates and relative values.
    If not printed correctly because you did not foresee to have different percentages it is easy to solve it with a programmer.
    In case of questions or doubts do not hesitate to post back your answer.
    Regards,

  • Can  not register with verizon

    I have a new verizon wireless internet service. I can not register to view my bill because I need a cell phone number and I do not have a verizon cell phone. How can I pay my bill? I have emailed verizon about this problem and never received a reply, so don't know what to do now, I sure don't want my bill to be late. Thanks for any help you can give me.

    Hi my name is Leslie. Broadband cards come with a 10 digit mobile number it is located on bill or on receipt when account opened. To complete registration will need to have device plugged in and your VZ Access Manager up. If you are using windows there is a "TXT" option to click on to receive temporary password. When you have 10 digit mobile number click on Forgot password on sign in page on www.vzw.com . Next page will ask for 10 digit mobile number, then will request for you to send temporary password.

  • Can I communicate with two different FP 1000 modules through one labview program at the same time

    I am wondering could you communicate with two seperate FP 1000 modules with one labview program, using a tab control, with page 1 of the tab communicating with one FP 1000 through com port 1 and page 2 of the tab control communicating with another FP 1000 module through com port 4, using different iak files for both. Can I do it through using those wireless modems supplied by National Instruments. Sorry I dont have a name for them.

    Noely,
    Within a single IAK file, you can have multiple FieldPoint modules on separate COM ports. There is no need to use separate IAKs for the program you are describing. Actually, older versions of NI-FieldPoint do not support having multiple IAKs in use simultaneously (I am not sure whether it is currently supported).
    As for the Radio Modems, they are called SRM-6000s and can be used simultaneouslyon different serial ports. Although, using the SRM-6000 in a single master multi slave arrangement, you could use a single serial port to talk to both FP-1000s (3 SRMs total). You will need to configure the FP-1000s to have separate addresses (DIP Switch setting).
    Regards,
    Aaron

  • Can LAP1242s register with DNS?

    We have a need for some 1242s that are connected to a controller to be pingable by DNS name.
    Is it possible to get the APs to register with DNS when they get an IP address? I don't recall seeing it as an option - if it can how do I do it?
    Thanks in advance

    Thanks, Robert.
    The scenario is that we have some APs that we want to move from site to site for training. We will prime them for the WLC, but let DHCP allocate the IP addresses.
    Just want an easy way to find them.

  • Client Can't register with inContext

    I am having a frustrated client: [email protected] trying to register to edit there site.
    When i sent him the invitation he said he never got it. I deleted him, added him again and clicked on copy me on the invitation. I then forwarded him the invitation and he has had no luck registering. It is telling him that there is an account already with that email.
    Please help, i really don't like giving our clients the runaround on this, i also haven't received a confirmation email from adobe for his account.
    Thanks in advance! Marcus

    I have also verified that our client is getting the email verification from adobe. However, once it says congratulations, it is saying to login. Once he does that, it says you aren't a registered user.
    here is the email below........
    Hello,
    To verify your use of this e-mail address [email protected] with InContextEditing.com, please click on the below link.
    https://incontextediting.adobe.com/services/redirect.php?url=1ab2babf8bdd7daf71551ccf6c924 4dab17b21f9&ev=2J513FWQFJJB6AA44ZZK67K07R
    If you cannot access the link above, please copy and paste the link into your browser.
    If you are not currently registered with Adobe InContext Editing, please disregard this message.
    Sincerely,
    The Adobe InContext Editing team
    http://incontextediting.adobe.com

  • Hey.i would like to know who can i register with my ipod touch warranty?

    hey.i would like to know whether i need to register with my ipod touch warranty?if yes.please guide me.thanks;)

    Try working through the steps in this Knowledge Base article and see if that doesn't help...this assumes you are using a PC but would be similar for a Mac.

  • ATA-186 can be registered with CUCM v10.5

    Hello guys ;
                          Please confirm me that ATA-186 can work with CUCM v10.5 ? .
    Regards;
    Shib

    Loaded the latest firmware into CM, then manually on ATA firmware using this process as CM didn't change it:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/186_188/3_0/english/administration/guide/sccp/sccp3_0/sccpaapc.html#wp1011450
    I followed this link from another post regarding ASA not registering for an older issue.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/3_0/english/administration/guide/sccp/sccpaape.html#wpxref59054
    Follow the part that mentions setting the SID0 & SID1 to "." no quotes.  I did this and my ATA registered to CM.  Screen caps attached.
    I have a Cisco ATA 186 running on 10.5.1 and it shows to be registered.  I can make calls on it.  Not sure how it will do for faxes.  HTH Please rate.

  • Can't register with CWM on device

    Hi,
    I've been trying to register my 5800XM (latest firmware) with CWM Australia for days now, but I just can't get it to work. I've tried both the house WLAN (which the phone is correctly set up for - no problems web browsing/VoIP/podcasts/etc) and 3G as the net connection.
    I run the "Nokia Musi Store" app on the phone, and  get a browser-like screen where I select my country (Australia). It then does one of two things:
    1) most of the time, it does nothing for several seconds and then pops up "Music Store: Unable to perform operation"
    2) much less frequently, it instead goes to a screen where I can enter information including the CWM PIN. If I then press "Join", it rejects anything I got wrong (eg. non matching password fields) and I have to do it again. If I didn't get anything wrong, though, it just does nothing for a few seconds (the 'Join' button is inaccessable during this), then the Join button comes back, but absolutely nothing else changes - no error message, no new screen, no UI changes at all in fact - it just looks like I never pressed "Join".
    And because of this, I'm not going to be able to register within the 2 month limit (phone was a present, so sat with someone else for a while) despite starting well in time.
    This is just not acceptable. And I won't even go into all the other problems I've had with both Nokia device and PC software in the last months. Suffice to say I'm a software developer, and I'd be embarrased if it were me.
    Does anyone know a Nokia number in Australia where I can get someone to sort this out?
    Thanks!

    (I'm keeping a log of the events here, as I suspect it will be needed)
    Still no call back by Wednesday Feb 24th so tried calling them again (1300 366 733 #4 #2).
    Got through the menu system, the "we are very busy - consider calling back later" warning, and the lengthy queue wait to a man who was impossible to understand (partly because of the extremely **bleep** call quality).
    I explained I called three days ago and hadn't received the promised "24-48hr" follow up call. He asked for the case reference number,  which of course I was neither given nor knew about. No problem, he found it from my return phone number. He went off to check, put me on hold, and I'm cut off. I waited 15 mins for a callback (he knew my number after all) but nothing.
    So I called again. After another "we are very busy - consider calling back later" warning, and a lengthy queue wait I got a woman, who was a bit easier to understand. She looked me up from my phone number and found the problem report.
    After putting me on hold for a few minutes, she very unsurely informed me that Comes With Music in Australia was "having a system update" and "not working at the moment".
    I didn't believe that. I'd been having the same problems with the same behaviour, whether trying to register on the device or PC, for several weeks. Nothing ever seemed any different. I had once got a message about CWM/Ovi Music not being online when running Ovi Player, but not recently.
    Furthermore I had, at one point last Sunday, tried another "clean" PC and phone just to see what happened. That is, I installed Ovi Music, connected up another 5800XM (a UK one, that time) and tried to register. That time it did actually do something, for once, returning with an error message that the connected phone wasn't a CWM device (true). But as soon as I went back to my own PC/phone, it behaved exactly the same again. Even after a complete reinstall.
    So I asked how long it had been offline for, but she "didn't have access to that information". I asked how long it was going to be offline for, she ddidn't have access to that information either. I asked if she could confirm it had been offline since the previous Sunday, same answer.
    I gave my reasons why it didn't seem a likely explaination to me, but was told she couldn't help and I should continue to wait for the "12 to 24 hour" elevated support return call, however long it took. I expressed doubt I'd get one at all, and reiterated my concern about the 2 month CWM registration limit, and got a vague (and hardly confidence inspiring) "oh that'll be alright".
    So I will continue to wait. I might do some googling to see if this problem is related to the 40.0.005 firmware version, which both phones were upgraded to as I've found that that creates all sorts of other problems.

  • Can't register with itunes with a credit card from outside the USA

    Who do I write to, to complain that because I don't live in one of
    the countries listed in the drop down list on the Itunes store, I
    cannot register my credit card OR purchase from Itunes ?
    I am trying to register to buy online with ITUNES. However the
    system does not seem to allow me to change the country from the
    United States to Argentina where I live and where my Bank of America credit card is registered !
    Come on guys, I thought Apple was better than this and recognised
    that there is a world outside Bill Gates' USA ! How can I change the
    country ?
    [email protected]

    Unfortunately, if your country doesn't have it's own store, you are out of luck. Content providers such as record companies require a CC with a billing address from the country that you use. The content providers require this rule as they do not care for cross-border sales, so it really is not Apple's fault.

Maybe you are looking for