Can db file be reused automatically

Hi ,
i am using Oracle 8i 8.1.7
I have this tablespace called "tspc1"
and the tablespace has 5 db files and one of the tables is table1
ques :
1. the data in table1 can span across mutliple db files though each record can only be in 1 db file ?
2. this table has 100M records, with first record dated back to Y2K , and assuming that this record resides in db file 1 and if i now delete the records in Y2K , will oracle save new rows into db file 1 assuming now it's using db file 5 ?
if not , how can i point the table to be using that particular file ?
pls advise
rgds

<<snip>>
ques :
1. the data in table1 can span across mutliple db
files though each record can only be in 1 db file ?-- Mostly true. If the row length is > than will fit on one block, it will span to an additional block which could be in a different data file.
2. this table has 100M records, with first record
dated back to Y2K , and assuming that this record
resides in db file 1 and if i now delete the records
in Y2K , will oracle save new rows into db file 1
assuming now it's using db file 5 ?
if not , how can i point the table to be using
that particular file ? -- Blocks that have had rows deleted will be reused if sufficient space is made available. You do not need to do anything to direct the database to reuse the blocks. If you are using DMT, the block will go on the freelist to be reused when the amount of space used falls below the pct_used setting for the table, If you are using LMTs, the block will be marked as available immediately. Of course, if you are using +APPEND, then no blocks will be reused because rows will be added at the high water mark.

Similar Messages

Can a file be uploaded automatically without

browsing to it. i have an app that was searching for an id and getting data back on the next page then creating a text file and writing to it. can i have that file uploaded after it has been written to it without a user browsing to where it is? need a little direction please?
thanx

how to receive the uploaded file with servlet's request ?

HT1597 How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers po

How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers podcasts as the last step, and at other times randomly, when trying to just add some MP3's to a playlist, for example. I can't seem to find any other option to uncheck, and can't find an answer from my so-far internet searching.

erict, you blew me away with that suggestion! It was something so simple I couldnt believe I hadnt thought of it! But in the end it didn't work, which I was really surprised about. On Windows anytime anything was moved itunes was hoplessly lost, but on this mac it still kept up with everything. I tried renaming folders, moving folders, and even renaming moved folders but it still kept trying to import.
I even went as far as deleting EVERYTHING i had moved to the Mac, which didnt really work. It still kept trying to import what wasnt there which made it continue to freeze up. However, after doing this it, the freezing was not nearly as bad. It gave me enough of a break to cancel it through the itunes dialog box at the top of the app. So in the end, thats all I really needed to do, only before I had deleted everything the freezing would not allow me to do it.
So now Im reimporting everything again, only slowly, and only a few Artists at a time.

The backup files for my devices are saved to my internal hard drive. I have a small internal hard drive and would like them to be saved to an external drive. How can I change where iTunes automatically backs up to?

The backup files for my devices are saved to my internal hard drive. I have a small internal hard drive and would like them to be saved to an external drive. How can I change where iTunes automatically backs up to?

This has nothing to do with iTunes as iTunes provides no way to move or relocate the backup files.
A search of google or the fourms would reveal ways to create a folder link to relocate the physical location where the files are stored.

How can I stop Firefox from automatically downloading and installing updates?????? UN-Checking box when installing for auto DOESN"T WORK!!!!

Have many performance problems with latest versions of Firefox.
I remove fFrefox and reinstall 18.0 and everything is fine until Firefox automatically updates to 28.x.
I remove check in box when asked if want Firefox Maintenance installed, but downloads updates anyway and next time I bring-up then problems are back!!!
I have to start over again and never X Firefox.
I just want the basic Firefox - simple, FAST and WORKS !!!
Never liked IE - but may have to go back to it.
Chrome is also automatic download update.
using XP, but may have to rethink
Thanks for any help.

What kind of problems do you have with the Firefox 28 release?
Did you check your security software (firewall, anti-virus) to make sure that the new version in allowed?
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
You can create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I want to transfer all my iPhoto, iTunes, contacts, etc. files from my MacBook, which I am selling to a MacBook Pro. What is the easiest and safest method of achieving this? Can the files backed up on Time Machine be transferred to the Pro?.

I want to transfer all my iPhoto, iTunes, contacts,documents, etc. files from my MacBook, which I am selling, to a MacBook Pro. What is the easiest and safest method of achieving this? Can the files backed up on Time Machine from the MacBook be transferred to the Pro in some way? I would like to capture the files as they appear on the MacBook, such as "Events" in iPhoto and the various song categories within iTunes without having to rename them all once saved on the Pro, which is the case with photos when I simply save them to thumb drive and import them to the Pro. Sny advice would be appreciated.
Best regards,
Rob.

Michael,
Thanks for all your assistance. There is no need for apologies, Migration Assistant did indeed create a second account for the MacBook data. It has just taken me some time to figure out how to access it. I now have all the MB data in one account and the MBP files in another, which suits me fine. In fact, it is an advantage in my case as it keeps the private and business aspects separated.
I will however try the fatcatsoftware to transfer all the iPhoto files to my iMac, where I keep my main photo library. and it will be of help to keep the events, etc in the transfer. As far as iTunes is concerned, I have HomeSharing on all my computers and this has obviated the need to worry about playlists being transferred successfully. However, HomeSharing did not appear to share the iPhone/iPod apps that were stored on the MB and although these have now come across with the new MacBook account on the MBP, I was wondering whether my iPhone and iPod will be recognised by the MBP and sync with it? Will I need to have the MB account open to achieve this or will the MBP recognise and sync with the iPhone/iPod automatically irrespective of which account is open?
Thanks for the tip on deauthorising my iTunes account from the MB before sellng. This I will do and I believe the best way to remove all of my data from the hard drive is to reinstall the MacOSX operating system software. Is this the right approach to securely delete everything?
Thanks again for sharing your expertise and your guidance through this exercise.
Best regards,
Rob.

Save a pdf file without Adobe automatically adding "-Copy" to the end

How can I save a pdf file without Adobe automatically adding "-Copy" to the end of file name?

If you have actually made any changes (e.g. adding a Sticky Note or filling out forms), the Save button will appear in the bottom toolbar. It will save it as the same name.
"- Copy" is added only when you tap/click the Save As button. You can change it to something else, if you'd like.

10G Database install on Linux 64bit File system Vs. Automatic Storage

Hi,
I'm installing Oracle 10G on a Dell 2950 server with an Intel 64 bit processor. The operating system is Red Hat Linux 4. It has a hardware RAID.
I've downloaded the Install Guide but I have a question about installing.
I'm confused about the File system vs. Automatic Storage management option. I will be installing on the local system, I will not be using a NAS or SAN.
Under Database Storage Options, the guide says that "Oracle recommends that the file system you choose be separate from the file systems used by the operating system or the Oracle software.".
1. Do I need to do that since I'm already using hardware RAID??
2. Which way is recommended / what do most people do: File system or Automatic Storage managment??
3. For Automatic Storage Management I read that I'd have to create an ASM Disk group that can consist of "a multiple disk device such as a RAID storage array or logical volume. However, in most cases disk groups consist of one or more individual physical disks". Do I need to reconfigure my partitions ??
I just need some input on what I should do since this is my first time installing Oracle on Linux.
Thank you.

Besides documentation there's a step-by-step guide :
http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html#asm
Many questions should be answered here.
Werner

I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling, but it is no longer installed as an add-on

I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling the add on and plug in, but it is no longer installed as an add-on or plug in. How do I get the "new tab" request to simply open with a blank address in the address box instead of www.imesh.com.

Ok, I finally managed to get rid of it.
First I did the thing with the about:config but I flitered for imesh instead and managed to reset two thing but when I got to the keyword.URL I got the same thing as lolbabe98 did with the "An attempt to change your search engine or homepage was blocked."
Then I did a search on my C: drive for iMesh and discovered some things that hadn't been removed even though I had unistalled both the toolbar and the actual program. After that it worked fine and I now have a regular "untitled" tab when I open a new tab.
One last thing, when I tried to remove some of the files there was one that said it was in use, it was called datamanagerUI or something rather. The only thing I had to do there was to open Task Manager and kill a process called DATAMN~1 and I was able to remove it. Hope this helps.

Using Spry.Data.XMLDataSet. Can xml file name be set to change on calendar date?

I have a website that uses Spry Data XML DataSet to list common pests for the current month. http://www.shspestcontrol.com/
Each month's list of pests is in a separate xml file (e.g. pests-august.xml)
Rather than manually updating the file name each month, can it be setup to automatically change the name
For instance on January 1st, file name changes to pests-january.xml, Feb 1st changes to pests-february.xml. etc.
<script type="text/javascript">

</script>
Any advice if this can be done and if so how to go about doing it would be much appreciated
Thanks, Toni

<script>
var dsPests1 = new Spry.Data.XMLDataSet("pests-september.xml", "gallery/pests/pest");
function setPestsFile(){
    var months = new Array(13);
        months[0] = "january";
        months[1] = "february";
        months[2] = "march";
        months[3] = "april";
        months[4] = "may";
        months[5] = "june";
        months[6] = "july";
        months[7] = "august";
        months[8] = "september";
        months[9] = "october";
        months[10] = "november";
        months[11] = "december";
    var now = new Date();
    var monthnumber = now.getMonth();
    var monthname = months[monthnumber];
    dsPests1.setURL("pests-"+monthname+".xml");
    dsPests1.loadData();
window.onload = setPestsFile();
</script>

Snap file is created automatically on my SharePoint database ?

Hi,
On My SharePoint Database a snap file is created which consumes lots of space and the performance of server is degraded.
The snap file is created automatically and its also removed automatically after 1 day.
I am new to SQL and won't find any scheduled task for snap file under SQL .
I had checked on technet and won't find an appropriate solution, why snapshot file is created.
The SQL server version is 2008 R2 and SharePoint version is 2013.
Also due to snap file sometime I am unable to take backup of database with DPM (Data Protection Manager).
Thanks,
Nadeem A

Hi Nadeem Ansari,
A take Snapshot operation creates .vmdk, -delta.vmdk, vmsd, and vmsn files. You should ensure the type of snapshots file.According to your description, the snapshot file was created automatically, and there are no any scheduled task for the snap file in
SQL Server instance. As other post, you need to verify if there is a job about back up your back up a database to a snapshot in SharePoint Server by using SQL Server tools. And verify if the snapshot file was created by others, and if it is file system snapshots
file.
For more information about snapshot files, you can review the following article.
https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.vm_admin.doc%2FGUID-38F4D574-ADE7-4B80-AEAB-7EC502A379F4.html
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Import many excel file into owb automatically

Is it possible to load several excel files in owb automatically?
I want to avoid the follow situation...
I have like 100 excel files I have to create 100 system dsn each pointing to one excel file.
Is it possible?
Thanks

owb treat excel file as database. so you can keep your content in one excel but across different worksheet.
if you want to have multiple excel to be read by owb then create seperate dsn.
otherwise create flat files(pipe delimited) by SSIS service and use OWB to load data from flat files.

Can video files be added to a slide show in Elements 5 or 10?

Can video files be added to a slide show in Elements 5 or 10?

I would recommend PSE11/PRE11 if you want to use them on an integrated basis. Only the current product is supported by Adobe. Or you could get PRE10 if you are not concerned about support.
But be aware that one version will not integrate with another. They will work as stand alone apps but you would loose some flexibility. For example I start in the Slideshow editor in PSE, add my photos and transitions and then click Output >> Edit with PRE. The slideshow gets sent automatically as a clip and I can do further editing, add video, add music and narration etc.

Need to merge multiple files into pdf automatically

Guys,
I need to automate merging files into one pdf, i have looked everywhere and cannot seem to find an answer for it. I need to know if there is a command line tool for acrobat so i can use it in my batch file to combine files?

Hi Lauravill,
The free Adobe Reader cannot help you with the merging job. If you have Acrobat Reader then you can merge files into one pdf with the following steps-
Within Acrobat XI, select File > Create > Combine Files into a Single PDF.
Click Add Files and select the files you want to add.
Click, drag, and drop to reorder the files and pages. Double-click on a file to expand and rearrange individual pages. Press the Delete key to remove unwanted content.
When finished arranging the files, click Combine Files.
Select File > Save As > PDF.
Name your PDF file and click Save.
Let us know if you face any problemwith this or need extra support.
Thanks
-Satyadev

Can't download font package automatically

when try to open a PDF file,
there is a message that a font package is required, after i clicked OK on the message, nothing happened. it's adobe X 10.0.1 in Win7
when I tring with another Win2008 server, same 10.0.1, and here after i click OK on the same message, it can download the font package automatically.
So i wonder, is there anything wrong in settings of my Win7's Adobe?
pls help.
Thanks.

yes, i think i got it.
due to that this is in enterprise environment,
auto updator feature is disabled.
here is it:
http://helpx.adobe.com/acrobat/kb/enterprise-administration-acrobat-products.html
thanks all.

Can db file be reused automatically

Similar Messages

Maybe you are looking for