Can I automatically toggle between t/f in a loop based on a timer?

Instead of the user manually toggling back and forth between true and false, I would like the code to do it automatically based on a timer.

You can use a local variable to write the value to a front panel control...take a look at the LabVIEW Help for more information about local variables.  And if you don't want the user to toggle the value, you can just get rid of the front panel control, do the logic on your diagram, and use the output of your logic code to control the boolean value instead of a front panel control.
-D
P.S. - If you still need help, it's always good to post a sample VI that helps illustrate the problem you're having.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

  • My phone automatically toggles between silent and ringer mode. How to fix ?

    my phone automatically toggles between silent and ringer mode. How to fix ?

    Hey there Sam1011,
    It sounds like you are not flipping the side switch but the phone keeps muting and unmuting by itself.
    I would start by toggling the side switch manually to mute, then unmute. Then evaluate it for a bit. If the issue persists, reset the phone with this article and test the issue.
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears
    If the issue persists I would next backup your phone to iTunes and then restore it:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Why can't I toggle between current settings and defaults on the ACR basic panel?

    When I try to toggle between current settings and defaults, I get a blue or black screen in the "After" image so I can not compare before and after.  The toggle doesn't work when I am viewing a single image or when I am viewing before and after side-by-side.  The blue or black image looks like the image is totally clipped, but it's the same whether clipping is on or off.  Command-Option-P does not work either.  Also, the histogram totally disappears when I try to toggle.  So I think something is corrupted, and I'd like to know how to fix it.  BTW, this toggle works fine when I am in the adjustment brush panel; it's the basic panel where it doesn't work.  I use Photoshop CC (2014) and Bridge CC on a new iMac--Yosemite. All are up to date (ACR 8.7.1.311).  I am not using Lightroom.  I would appreciate a suggested fix.  Confession: I am very new to the Mac environment and just returning to Photoshop after an absence so I'm finding my way; there's a good chance I'm making a rookie mistake.  Thanks in advance for any help or suggestions on where else I might post my question.

    The only fix at the moment is to hold the option key when clicking the green button.
    Send Apple your feedback and this might get fixed: http://www.apple.com/feedback/itunesapp.html

  • How can I automatically have the XRAID turn on and off at a specific time?

    Hi Everyone,
    I was wondering if anyone can help me figure out how to turn on and off the XRAID at a specific time. My electrical bills are crazy. Is there a way to get this done?
    Thanks,
    Jorge

    Hi Everyone,
    I was wondering if anyone can help me figure out how
    to turn on and off the XRAID at a specific time. My
    electrical bills are crazy. Is there a way to get
    this done?
    Thanks,
    Jorge
    I think turning the RAID on and off periodically is a bad idea. But if you really really really want to do this ....
    Connect the xserve raid to a 'metered power strip such as those provide by APC. you can telnet to the power strip via the network to power off individual port)
    write a script (run on the xserve or powermac that the RAID is connected to (direct or via switch)
    0) quit application (issue a quit command or if the application have a stop command (example databse can be stopped)
    1) unmount volume (must)
    2) issue a telnet command via expect script to control the power strip to power off the array.
    If you have java cli access to the array (see alienraid.org).(I have not tried this before.)
    http://alienraid.org/article.php?story=xserveraidtools12&query=command
    You can issue a command to execute the RAID admin shutdown command.
    Put the master script into a unix cron job.
    macbook pro   Mac OS X (10.4.7)   typing this on a white box pc

  • Simple-how can I toggle between screens

    Ok...this is really simple, or it should be. Can I change a preference anywhere on my Mac to where I can not only toggle between programs with the "apple key + tab" shortcut, but toggle between open windows within a program?
    For example, if i have iTunes open and Safari open I can toggle (switch screens/windows) between the two with the "apple key + tab" command but I cannot toggle between screens WITHIN a program. If I have Word open and I am working on two documents and I want to go from the forward window that I am working in to the window behind it I have to manually, with the mouse point and click on the window at the back.
    Is there a preference I can change somewhere on my Mac or no? I've looked but maybe I'm not looking in the right place.
    Curlz

    Who says it's undocumented? It is documented several places. In Mac Help, search for "Keyboard shortcuts"; select "Full keyboard navigation" or "Shortcuts for windows" -- this is documented both places and probably others as well.
    Also, in System Preferences > Keyboard & Mouse > Keyboard Shortcuts, you can change shortcuts, or disable them, or just see what they are currently set to.

  • All of a sudden I can no longer toggle or clip angles in multiclip sequence

    Hi,
    I've got a project with a number of sequences, videos, angles, etc and all of a sudden I can no longer toggle between angles in the sequence timeline. It was working last night and then stopped and it's still unresponsive. Every time I click to switch an angle or cut to an angle I get the alert beep.
    I am not out of disk space and haven't changed any settings as far as I am aware of.
    Thanks

    Not sure what the deal is...have you added any new software or upgraded/updated anything since this started?
    Have you tried opening an autosave version, to see if it works there?
    Trashed prefs, run disk utility?
    I'm not sure I've ever heard an 'alert beep', so would wonder if the drive is failing.
    Can you be a little more explicit about exactly how it 'stopped working'...were you right in the middle of working on it, or had you stepped away for a bit?
    Have you tried shutting down, then rebooting after 15-20 minutes?

  • Can I seamlessly toggle Apple TV between Mac Mini and Iphone / iPad?

    I am having a Mac Mini, iPad, iPhone and Apple TV. Currently i am using 2 HDMI cables 1 between TV and Mac Mini and 2nd between TV and Apple TV. Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV; it becomes an issue.
    Can I seamlessly toggle Apple TV between Mac Mini and iPhone / iPad?
    Regards,
    Mahendra Panchal.

    Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV;
    Toggle how?  What are you doing?  Why do you have the MacMini connected to the TV?  That is the whole point of AppleTV.  It is a simple way ( in therory ) to get your content to your TV without having to plug your computer in to your TV.
    it becomes an issue.
    What does?  What is the issue?  What specifically fails or does not work?

  • Can I toggle between multiple analysis on a single dashboard

    For 11g, I have created three identical analysis for three different business units. Currently I have each one on a different page within my dashboard.
    Ideally, i would like to include them all on one page of my dashboard and have the user be able to toggle between the three by use of a prompt. Can this be done?
    Or
    Can I build this as part of one analysis and use view selectors to toggle between the three?

    Yes we can do that,By creating Presentation Variables.
    Thanks,

  • I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

  • How can I have an object toggle between fade out and fade in with button?

    Hello all,
    I have a problem and I was hoping someone out there could help me out with it.
    I have smart shape that is set to show for "rest of project" on one of my early slides.  It is not visible in output in the properties, but when a user clicks a button in the project, it should fade in and then stay visible.  If the user clicks the same button again, it should fade out and stay hidden.  So rather than toggle between show and hide, which I know how to do, I want it to toggle between fade in and fade out.  I am having trouble with this.  Setting its transition to fade in and fade out in the properties of the smart shape doesn't help...
    Here is the advanced action I have attached to the button that should allow the user to toggle between fade in and fade out.  The "if" parts works -- the object fades in and then finally "shows" at 100% the "else" part almost works.  It fades out, disappears, but then shows again, which I obviously dont want it to do.  I want it to stay hidden.
    If you can help, it would be great!! 

    I Don't
    But as a work around you could try increasing the canvas size to match the illustrator file, paste in the object then crop off the excess canvas in photoshop

  • My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

    My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

    My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

  • Can we toggle between reports by click on textbox in SSRS

    Hi All,
    Can we toggle between different reports in SSRS by clicking on text box action.
    I want to make report in the following way 
    If i had two reports Report1 and Report2. When i click on Report 1 only Report 1 should be accessed.
    When I click on Report 2 only Report 2 should be accessed.
    Can you help me in this aspect.
    Thanks,
    Ganesh

    Hi,
    Yes this is possible and all depends on requiremenet
    If you want to toggle based on Parameter or not.
    Lets say you have two report
    Click on First navigate to another report based on nay parameter than you have to use then parameter
    in Go to Report option and that paramter must be both the report .
    Or
    You can simply use Go To report option .
    Step1.right Click on Textbox and select TextBox Properties.
    Step2 : Action -> Go to Report.
    Step3 : Specify a Report on which you want to navigate.
    Step4 : If you want to navigate based on Parameter than add -> sslect NAme and value  of paramter
    Step5 : ok
    Thanks

  • Can I toggle between sound output devices on iMac?

    Is there a way to toggle between the internal speakers and digital audio output, or do I have to unplug my mini-TOSLINK every time I want to use the internal speakers? Thanks!

    Hi, I think you will find you need to unplug the externals..to hear the internals..
    In certain circumstances/setups the externals can play music from iTunes & the internals can advise of emails..L

  • A homepage where I can toggle between two languages?

    How can I create a homepage where I give the user the opportunity to toggle between two languages?
    I what to have to differences flags in the corner, so when you press on one flag it switch to another languages.

    Hi Jan,
    You can to create different pages for different languages. You can place the flag on the home page and link them to the desired language page.
    Regards,
    Aish

  • Can I toggle between Safari windows?

    Hello,
    I know that you can toggle between different applications with command-tab, but can you toggle between multiple windows of the same app? Moving different safari windows around to find the right one is driving me bonkers. I know you can toggle between tabs, but sometimes you just have to have a new window!
    Thanks!

    You can go to your system preferences and select "Dashboard & Expose". Then assign one of the corners of the display to "All Windows" so that when you hover your mouse over that corner, all of your open windows are shown and you can click on the one you want to bring forward. But the "Tabs" are a great idea too.

Maybe you are looking for

  • How to enter a 'pdf-documentation' to an iview ?

    hi, at a presentation today in another company i have seen that in ESS-absence-entry web dynpro application on the top there was a link to a pdf-file -> which is the help for the application, written by this company for their employees. they said 'no

  • Extract records to Desktop in flat file

    How to Extract records to Desktop in flat file. I am not able to do it from Syndicator,i tried many options.Some one can help. I want to extract the records from MDM to Desktop in Excel/Flat file format,whether it is from Data Manage or Syndicator. I

  • Profit Centre and Cost centre not updated

    Hi, I have posted expenses through FB60 and assigned cost centre to the expenses account and not for vendor item. Entry passed was posted. But when i checked the document, i saw that the cost centre and profit centre is appearing in one line item (i.

  • Can I place jar files inside ejb-jar.jar?

    Hi, I'm reading about the packaging rules for creating an ejb-jar.jar file, and I'm wondering whether it's possible to include a jar file (containing helper classes) inside of the ejb-jar file. A "lib" dir (for containing such helper jars) doesn't se

  • Insufficient Data for an Image error with Adobe CONVERT_OTFSPOOLJOB_2_PDF

    We are using the standard function module CONVERT_OTFSPOOLJOB_2_PDF to print a standard invoice to the spool and convert it to a PDF. This PDF is displayed on the web by directing the output of this function module to Adobe Reader. We are having a pr